Related
Ok been using a screen protector for a week now and the pen has scratched the hell out of it so my question is why lol and is any body else got this problem. IF not what ones did you buy mines where cheap so I'm hoping that's the reason.
I'm using my note without any screen protector. Not a single screach yet.
Search the forum. There is plenty of posts in this topic. Go to accessories section.
As xda always says "search, search, search before posting. "
Cheers
Yeah I know lol was just curious as my screen its a mess just glad its on the protector
Its tru i see lines n dents on the protector but mine comes from draw something
Sent from my GT-N7000 using XDA
islandmixed said:
Its tru i see lines n dents on the protector but mine comes from draw something
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
lol yeh mine as well
splitroaster said:
lol yeh mine as well
Click to expand...
Click to collapse
i m using "Professional Screen guard" it is anti glare and lill ruff type but it reduce clarity a bit...
splitroaster said:
Ok been using a screen protector for a week now and the pen has scratched the hell out of it so my question is why lol and is any body else got this problem. IF not what ones did you buy mines where cheap so I'm hoping that's the reason.
Click to expand...
Click to collapse
Wow... U must have some really bad screen protector.
I bought a pack of 10 off ebay for about 10 dollars, my intention was to use these to learn how to apply a screen guard properly first and then buy a relatively expensive quality screen guard later but surprisingly I never had to buy again, cuz those dirt cheap screen protectors have lasted till now with no scratches even after using stylus extensively. I have about 6 more left ( first 3 had big ass bubbles/dust in it after application)
Maybe Iam simply lucky to have found a good seller
FYI, Anyone that is considering purchasing the Invisible Shield for their Nexus 7, I just received mine in the mail today and when applied it would not allow the touch screen to operate. I was unable to unlock to access anything, once I peeled away the Invisible Shield everything was fine. Tried to reapply a second time with the same results, just wanted to give all a heads up.
Yet another reason to go xoskins
Sent from my Nexus 7
Had the same problem after I installed my Skinomi screen protector tonight, but after 2 hours everything is fonctionning again.
You have to wait with all screen protectors that are applied with application fluid....
I learned early on that the extra money you pay for Zagg to install the invisibleshield for you is very worth it.
I had absolutely no problem with mine.
http://forum.xda-developers.com/showthread.php?t=1798515
I was going to get one but I decided against it after finding out stylii don't work with them.
Sent from my Nexus 7 using Tapatalk 2
woshiweili said:
I learned early on that the extra money you pay for Zagg to install the invisibleshield for you is very worth it.
I had absolutely no problem with mine.
http://forum.xda-developers.com/showthread.php?t=1798515
Click to expand...
Click to collapse
Except they look like crap and completely ruin the beauty of the nexus according to your pics.
sinbsd said:
Except they look like crap and completely ruin the beauty of the nexus according to your pics.
Click to expand...
Click to collapse
The front looks perfectly fine. You can't even really tell there is something there. The back is subjective. I didn't like it at first but it has grown on me. But no one forces you to have the back anyway.
Nxxx said:
I was going to get one but I decided against it after finding out stylii don't work with them.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
What are you talking about? I don't use styli/styluses but I just tried one it works fine.
matth3wlong said:
FYI, Anyone that is considering purchasing the Invisible Shield for their Nexus 7, I just received mine in the mail today and when applied it would not allow the touch screen to operate. I was unable to unlock to access anything, once I peeled away the Invisible Shield everything was fine. Tried to reapply a second time with the same results, just wanted to give all a heads up.
Click to expand...
Click to collapse
You did not wait for it to dry. You just wasted a perfectly good skin.
digriz said:
You did not wait for it to dry. You just wasted a perfectly good skin.
Click to expand...
Click to collapse
This is why I never install it myself and just pay the guy at the mall to do it. I've never had a problem.
Bought one and had to remove it. It completely distracted from the quality of the screen.
Sent from my Nexus 7 using xda app-developers app
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Basicallyevolve said:
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Click to expand...
Click to collapse
I don't have a single problem with my invisibleshield on my Nexus 7, including the one you mentioned above.
So one of the following must be true:
You have a defective Nexus 7 with under-sensitive touchscreen.
Your InvisibleShield is defective (somehow)
Your installed your InvisibleShield wrong.
I received a Nexus 7 with "extra-sensitive" touchscreen (if something like this exists!)
Does anyone's protector seem a hair too big? A bit of it is going over the bezel. Will this thing shrink?
Sent from my HTC Vision using xda premium
I'm not getting one since the stylus doesn't work with it.
Sent from my Galaxy Nexus using Tapatalk 2
Basicallyevolve said:
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Click to expand...
Click to collapse
youre meant to let it dry...
capacitive screens work by reading the changes in the electrostatic field directly above the screen as you slide your fingers across it. using applicator fluid and the screen protector will restrict the range of the electrostatic field to underneath the screen protector until the screen protector dries. plus, you're putting water on an electronic device... generally not recommended to turn it on until the water's completely gone. it shouldve mentioned this in the installation instructions...
Anyone ever notice the glass looks like it's permeable on these touch devices? Lots of little holes.
But yes, water cuts the conductivity and will do so until completely dry, at least that is the result on this device.
Same results with most wet install screen protectors, it's not any particular brand being the problem... If you read the xoskins, skinomi and xtremeguard threads, people have the same exact "complaint"..
Let it dry man!
YMMV
Basicallyevolve said:
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Click to expand...
Click to collapse
You have to wait! Letting it dry is the key. Do you think a major company like Zagg would put out a product that ruins devices like that?
Sent from my Nexus 7 using Tapatalk 2
Can I use a hairdryer to make it dry faster?
Hyrax said:
Can I use a hairdryer to make it dry faster?
Click to expand...
Click to collapse
Risk over heating an LCD, I wouldn't.
Besides trying to expedite drying time may cause trapped air bubbles that will take twice as long if ever to stick and will leave a ripple on the protector. YMMV
I just received my iSmooth protectors today, the packaging is really nice and I love the cloth. I am going to install them in a bit and report back. I noticed in the package a little info card and if you post a review of the protector on Amazon and provide all the proof of review and your Amazon order number they send you another set for free with free shipping. I don't recall anyone mentioning this previously so I thought I would share the information. If you e mail them the Amazon order number, Details of the offer can be found here www.iSmooth.com/freepromo you will receive the same item you purchased or you can choose another similar product in their range. Pretty sweet deal, imo, that's 6 protectors and 2 cloths for just under $11
Sent from my SGH-T889 using xda premium
I think I mentioned it before in another post, they include Thank You card with this info. Indeed a very sweet deal, and they just want your honest opinion/review to receive a second set. But as you know, if you don't like the product you will not request for a second set anyway. Btw, did you receive original screen protectors with green cover film or the new ones with a clear cover film?
vectron said:
I think I mentioned it before in another post, they include Thank You card with this info. Indeed a very sweet deal, and they just want your honest opinion/review to receive a second set. But as you know, if you don't like the product you will not request for a second set anyway. Btw, did you receive original screen protectors with green cover film or the new ones with a clear cover film?
Click to expand...
Click to collapse
Green. Damn I will shoot them an e mail for the newer version.
Sent from my SGH-T889 using xda premium
Does it cover most of the screen?
Sent from my SGH-T889 using xda app-developers app
jacky37 said:
Does it cover most of the screen?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
It's too far from the bottom and not very wide but yeah it covers the usable portion of the screen. I will shoot them an email about the newer version.
Sent from my SGH-T889 using xda premium
Looks like a great deal
Sent from my SCH-I605 using Tapatalk 2
Rhiannon224 said:
It's too far from the bottom and not very wide but yeah it covers the usable portion of the screen. I will shoot them an email about the newer version.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
How do u know if u have the newer version?
Sent from the TermiNOTEr 2!
There's another thread, a review of the protector and there's pictures. You can see the cut, it's a plainly visual difference in size. Older ones have a green tint on the removable film that you peel off. Newer ones aren't green.
Sent from my SGH-T889 using xda premium
I applied the newer thicker cut and I like these even better. The adhesive is very good on the new ones. You wont be disappointed
Sent From My Galaxy Note 2
Nellyinda803 said:
I applied the newer thicker cut and I like these even better. The adhesive is very good on the new ones. You wont be disappointed
Sent From My Galaxy Note 2
Click to expand...
Click to collapse
Thanks, I already got a reply from Paul and he's sending out a new set. I love the feel and clarity of the protector, I don't like the cut on this one, too much screen exposed. I finally got the tackiness rubbed off and it feels really nice. I pulled off the jlg protector off my mom's phone, the rainbow was really annoying her. Slapped an iSmooth on it, she's happy now.
Sent from my SGH-T889 using xda premium
You gonna love new version. It's on par with Spigen stuff! The width will be similar to green tint ones, but the cutouts around home button and top of the phone are better. It sticks perfectly, crystal clear, no marks from s-pen, no rainbow effects, and very easy to wipe. Not sure if it was just my sample, I did notice some accumulation of fingerprints, but it's so easy to wipe. No different than Spigen oleophobic. The most important, it feels very smooth, not plasticky at all. This clear version is going to be their new screen protector moving forward in a week or so, as told by Paul.
Any chance u could pn me pauls email I just got the old revision of the screen protectors in the mail and I tried with the ismooth support email but got no response
Sent from my SGH-T889 using xda premium
Anyone want to sell me the 2nd set they got for free?
Buy 1 and get 1 set free. Not only are you protecting your device, you are helping put an end to screen saver slavery. Its really an epidemic... thank goodness people are taking action. Thank you.
Sent a long time ago in a galaxy far, far away... nah, nah, nah nah nah naaah nah, nah nah nah naaah nah, nah nah nah naahhhh.
vectron said:
You gonna love new version. It's on par with Spigen stuff! The width will be similar to green tint ones, but the cutouts around home button and top of the phone are better. It sticks perfectly, crystal clear, no marks from s-pen, no rainbow effects, and very easy to wipe. Not sure if it was just my sample, I did notice some accumulation of fingerprints, but it's so easy to wipe. No different than Spigen oleophobic. The most important, it feels very smooth, not plasticky at all. This clear version is going to be their new screen protector moving forward in a week or so, as told by Paul.
Click to expand...
Click to collapse
Are you saying the green tint ones with the ismooth backing and case labeled new version are the old makes?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
greeneon said:
Any chance u could pn me pauls email I just got the old revision of the screen protectors in the mail and I tried with the ismooth support email but got no response
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
I was using whatever support email is at http://ismooth.com/support/
I just know the guy's name is Paul since he replied back to me. Sorry guys, I probably confused a crap out of everybody with my references to "old" versus "new". I just go by how I understood it originally and what others posted in the forum (I think some of those screen protector posts were removed in favor of a new sticky thread?). Just never mind that whole new vs old stuff. I would say order it, and if everything works great and you are happy - then you are done! They give you lifetime guarantee and you will get 2nd set for free with instructions they provide inside of the shipping package. Also keep in mind, everybody has their own opinion and preference. Some like wet install, others dry. Some want tempered glass, others something else. The tricky part with screen protectors, those are not like cases where its easy to try one versus the other, and then you return whatever you like, or keep a few to change it for different occasions, etc. So, if you find one screen protector you like and happy with it - stop driving yourself crazy (i'm speaking from a personal experience) lol!!! Again, just my opinion, so take it with a grain of salt lol!!!
I just got mine are these new cut?
Sent from the TermiNOTEr 2!
borijess said:
I just got mine are these new cut?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
I just tried these and they are coming up on the left side of the phone.
Sent from the TermiNOTEr 2!
borijess said:
I just tried these and they are coming up on the left side of the phone.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
You mean coming off the left side of the phone? In general, not just iSmooth, if glass is not clean and/or oily from fingerprints on one side then it might have issues with sticking. Have you tried another screen protector from the pack and do you see the same problem? Make sure you wipe your screen really good. I actually buy one of those eye glass little spray bottles - its amazing how it cleans the screen and even screen protector (it works on both glass and plastic).
From the picture you posted, it looks like the original cut. Paul mentioned only something like 5% of original screens were affected by an issue of not sticking edge. If you remember, Note 2 has a glass that slopes down toward the Home button. That is where the troublesome edge could happen. If you see the second protector doing the same thing, even after you clean the screen, contract them and ask for a replacement new batch.
.... note to myself: check with iSmooth if they are hiring tech support lol!!!
vectron said:
You mean coming off the left side of the phone? In general, not just iSmooth, if glass is not clean and/or oily from fingerprints on one side then it might have issues with sticking. Have you tried another screen protector from the pack and do you see the same problem? Make sure you wipe your screen really good. I actually buy one of those eye glass little spray bottles - its amazing how it cleans the screen and even screen protector (it works on both glass and plastic).
From the picture you posted, it looks like the original cut. Paul mentioned only something like 5% of original screens were affected by an issue of not sticking edge. If you remember, Note 2 has a glass that slopes down toward the Home button. That is where the troublesome edge could happen. If you see the second protector doing the same thing, even after you clean the screen, contract them and ask for a replacement new batch.
.... note to myself: check with iSmooth if they are hiring tech support lol!!!
Click to expand...
Click to collapse
Emailed already they responded with they are going to send me new ones. I went through all three protectors. Same with all three not sticking on left side.
Sent from the TermiNOTEr 2!
https://www.youtube.com/watch?v=a-SaNaXROG4&feature=youtube_gdata_player
Www.mimeusa.com
This video helped me with the protector. Posted it and have had it about a week. It's kinda similar to another glad protector out there. I love it. The clarity is amazing and the finger flow on the glass is great. U do have to wipe the smudges off after a bit but no biggie. The function of the S pen is great. It was a concern for me but as soon as I got it on the S pen was the first thing I tried and no problems.
I've gone through a couple other protectors because I use the S pen a lot and hated the marks left on the screens so paying the $30 didn't concern me. The only thing I have issue with us that at the edges it looks like it's not fully connected but it is. Don't really notice it unless I focus on it but all in all a great protector for someone like me that was looking for something that was sturdy and didn't leave marked when u use the pen.
Sent from my SPH-L900 using xda premium
thanks for the review - ordering and seeing how it goes...
Did you buy an add-on home button? Did the screen protector make it harder to press the home button since it is much thicker. Is there very much Loss of touch sensitivity?
Sent from my SGH-T889 using xda premium
artofwar said:
Did you buy an add-on home button? Did the screen protector make it harder to press the home button since it is much thicker. Is there very much Loss of touch sensitivity?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
+1 on this question
Sent from my SCH-I605 using xda premium
artofwar said:
Did you buy an add-on home button? Did the screen protector make it harder to press the home button since it is much thicker. Is there very much Loss of touch sensitivity?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
No I didn't buy the home button. It's a bit recessed but it's not bad and I don't have any problems with turning on the phone. So fast no loss in touch sensitivity, I love this protector. I wanted a protector like this for a long time and now that it is I'm happy. A lot of smudges but a quick wipe and clear as anything.
I ordered another one for my wife and it seems the order is delayed. I haven't heard anything from the company but my last order took 4 days to get to me.
Sent from my SPH-L900 using xda premium
Would this protector work with an Otterbox Defender Case? And do any of you guys have a pic of it installed on your note 2?
MEGA23 said:
Would this protector work with an Otterbox Defender Case? And do any of you guys have a pic of it installed on your note 2?
Click to expand...
Click to collapse
Yes pictures please!
If u take a look at the video it give u an idea of what it looks like on. I'll have to take pics this weekend to post.
Sent from my SPH-L900 using xda premium
When I order mine I don't remember any where you could order a add on button. But one thing for sure you have to be patient when you order. It took 7 days before they even sent it out. Will be here on Monday. Can't wait.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I ordered this:
m-protectors/glaz-tempered-glass-protector_190_en.html?pb=71&pc=20
But kind of wishing I had seen the Mime as it looks like it might be better and I like the fact that it comes with those other screen protectors to put on top of it(but looks like they may not be including those anymore?).
Haven't received it yet, so may try to cancel if possible.
Sent from my SGH-T889 using xda app-developers app
Afishl1 said:
I ordered this:
m-protectors/glaz-tempered-glass-protector_190_en.html?pb=71&pc=20
But kind of wishing I had seen the Mime as it looks like it might be better and I like the fact that it comes with those other screen protectors to put on top of it(but looks like they may not be including those anymore?).
Haven't received it yet, so may try to cancel if possible.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
The purple protector is actually a static cleaner. You use it after using the cleaner to take off any lint or scrap that might be on the screen just before adding the glass screen so its clean and no items. My second one is taking a bit longer to get but received en email from Mime today letting me know that it has been shipped and should arrive shortly. My wife will soon enjoy the protector.
M2Iceman said:
The purple protector is actually a static cleaner. You use it after using the cleaner to take off any lint or scrap that might be on the screen just before adding the glass screen so its clean and no items. My second one is taking a bit longer to get but received en email from Mime today letting me know that it has been shipped and should arrive shortly. My wife will soon enjoy the protector.
Click to expand...
Click to collapse
Just to clarify, I meant I might try to cancel the other company's product that I had ordered (which I think was a pre-order).
Here's the correct link by the way:
http://www.itskins.com/product/temp...pered-glass-protector_190_en.html?pb=71&pc=20
Sent from my SGH-T889 using xda app-developers app
M2Iceman said:
No I didn't buy the home button. It's a bit recessed but it's not bad and I don't have any problems with turning on the phone. So fast no loss in touch sensitivity, I love this protector. I wanted a protector like this for a long time and now that it is I'm happy. A lot of smudges but a quick wipe and clear as anything.
I ordered another one for my wife and it seems the order is delayed. I haven't heard anything from the company but my last order took 4 days to get to me.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Hi
Is this what it looks like, this is the one I have and I'm like you very happy with it.
If you want me to remove this post just let me know, since it's not actually the mime protector.
This is what it looks like on my phone.
kms108 said:
Hi
Is this what it looks like, this is the one I have and I'm like you very happy with it.
If you want me to remove this post just let me know, since it's not actually the mime protector.
This is what it looks like on my phone.
Click to expand...
Click to collapse
Yeah, saw your post in another thread and yes thats exactly what it looks like. Im wondering if companies are getting them from one source and selling them as thier own. Anyone wanting to see what it looks like this is what it looks like.
M2Iceman said:
Yeah, saw your post in another thread and yes thats exactly what it looks like. Im wondering if companies are getting them from one source and selling them as thier own. Anyone wanting to see what it looks like this is what it looks like.
Click to expand...
Click to collapse
Thats what i'm thinking of, if this is true, then this one I have is telling the truth, at least is stated korean design and made in china, whiles the mime say it's made in the USA.
I actually ordered a spare one and received it, when I posted this in another thread, and during the installation there was a bubble that will not go away, even when I removed this protector a few time, I though it was a uneven glass, and suddenly it turned into a like a oily patch like rainbow effect, and thought it was just my sample, well just last week, it gone away, so now I have a spare one.
Don't get me wrong my spare one is not for sale, so please don't PM me.
I'm really happy with this and at a price i paid, can't really fault it, and a highly recommended product, whether it's my chinese version or the mime branded version.
---------- Post added at 11:35 AM ---------- Previous post was at 11:33 AM ----------
M2Iceman said:
Yeah, saw your post in another thread and yes thats exactly what it looks like. Im wondering if companies are getting them from one source and selling them as thier own. Anyone wanting to see what it looks like this is what it looks like.
Click to expand...
Click to collapse
You should get yourself a aluminum home button, it's a perfect match.
@kms108 can you give a link for your protector?
Sent from my GT-N7100 using xda premium
nnay said:
@kms108 can you give a link for your protector?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I can give you the link, but they don't ship outside china, hong kong and singapore.
but you can use www.yoybuy.com to buy it, but at extra cost.
just let me know and i'll post the link.
I received my glass screen protector from mime. I have two issues. One on the top and botton corners on the left side does not adhere on the corner edges and the second issue is that I have these very small like bubbles in random places that I can get out. I have applied and re applied and still get them in random places. Anyway besides that the screen seems to been good quality.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
xfaega said:
I received my glass screen protector from mime. I have two issues. One on the top and botton corners on the left side does not adhere on the corner edges and the second issue is that I have these very small like bubbles in random places that I can get out. I have applied and re applied and still get them in random places. Anyway besides that the screen seems to been good quality.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
read my post 15.
I was wondering about this one and its s-pen responsiveness.
Link here
$39.99 MSRP use code 'glass' for 25% off ($29.99)
Let me know what you guys think, I am pretty tempted to give it a try... oil and fingerprint resistant.
(after it's in the cart it automatically deducts the 25%)
ordered, will report back with review.
Wow, I wish I would have found this before I ordered my voyager 2, this looks nice. Update us when you get it and install it!
Sent from my Note Deuce using Tapatalk 2
hmm, im interested just because its a dry install!
I use clairvue screen protectors on all my phones, but I'd love to know how the glass ones perform. Really though, what's the advantage if a glass screen protector over the standard ones? I have no issues with the smoothness or the spen on the regular ones.
Sent from my iPad 4th gen using Tapatalk 2
EP2008 said:
I use clairvue screen protectors on all my phones, but I'd love to know how the glass ones perform. Really though, what's the advantage if a glass screen protector over the standard ones? I have no issues with the smoothness or the spen on the regular ones.
Sent from my iPad 4th gen using Tapatalk 2
Click to expand...
Click to collapse
I ordered the glasszone one because of the color options was the main reason but the glass ones are suppose to be way stronger, no scratches and don't show much fingerprints but really its just personal preference.
Sent from my SCH-I605 using xda premium
INCREMENTAL said:
I ordered the glasszone one because of the color options was the main reason but the glass ones are suppose to be way stronger, no scratches and don't show much fingerprints but really its just personal preference.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
glasszone glass sp is not a good sp as it is not 100% clear......there will be lots of lines....
I was going to order one but the website seems to be down. Oh well.
Sent from my SGH-T889 using Tapatalk 2
Any updates
Sent from my SGH-T889 using xda premium
Cerv3r said:
Any updates
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
bump
I've just ordered one now too as the 25% offer ends tomorrow. Will probably get it end of Feb as it's 10-15 days to ship to UK.
Have yet to receive the screen protector, and based off their website I believe this promo is apart of a pre-order. As soon as I receive it I will let you guys know, and include a review.
dylyxcore said:
Have yet to receive the screen protector, and based off their website I believe this promo is apart of a pre-order. As soon as I receive it I will let you guys know, and include a review.
Click to expand...
Click to collapse
I'm not sure it's part of a pre-order because I checked on my order on their website and it's already changed to "shipped". Pretty fast considering I ordered it a few hours ago!
I have received the screen protector, but it might be a couple days before I post a review... just an update though.
dylyxcore said:
I have received the screen protector, but it might be a couple days before I post a review... just an update though.
Click to expand...
Click to collapse
My only real question:
Does the sp go all the way to the edges or is there some gap?
Sent from my SCH-I605 using Tapatalk 2
Any update on reviews? curious on this product as well.
I bought products from Clarivue for years but this last time I bought screens for the HTC DNA. I ended up selling the DNA while the screens were shipping and instead wanted to get Note 2 screens and was even willing to pay all the shipping etc.., but they also wanted me to pay a restocking fee on the DNA screens....even though they had never even been opened!!! The stupid fee along with all the shipping made it easier/cheaper to just order the Note 2 screens and throw the DNA ones away. Needless to say I will never do business with them again and I'd been loyal since my Nexus One days.
It was like 3 or 5 bucks and for a loyal customer of years they wouldn't waive it for me. I would have bought these glass protectors in a heartbeat if not for this...I almost bought them anyway... but stayed strong in the end.
Anyway I hope you guys enjoy them I'm sure they are nice screens. They make nice products but when I needed good customer service it wasn't there.
Any updates/reviews on this. Post seemed to have just stopped. Interested in getting an idea on how the Clarivue HD is working on for whoever has it. Bought the MIME, but I feel like sensitivity was affected when typing. It didn't register the keys all the time. Contacted MIME and they send to send it back for an exchange or refund. Put one of my extra iSmooth sp's back on and I'm happy for now. Just curious about the Clarivue.
simbany1 said:
Any updates/reviews on this. Post seemed to have just stopped. Interested in getting an idea on how the Clarivue HD is working on for whoever has it. Bought the MIME, but I feel like sensitivity was affected when typing. It didn't register the keys all the time. Contacted MIME and they send to send it back for an exchange or refund. Put one of my extra iSmooth sp's back on and I'm happy for now. Just curious about the Clarivue.
Click to expand...
Click to collapse
Been using mine for around a week and a half now. Seems fine. I think once or twice I might have hit a key and it didn't register but not sure that was down to the protector. Haven't noticed anything else to be honest. Works perfectly for me
simbany1 said:
Any updates/reviews on this. Post seemed to have just stopped. Interested in getting an idea on how the Clarivue HD is working on for whoever has it. Bought the MIME, but I feel like sensitivity was affected when typing. It didn't register the keys all the time. Contacted MIME and they send to send it back for an exchange or refund. Put one of my extra iSmooth sp's back on and I'm happy for now. Just curious about the Clarivue.
Click to expand...
Click to collapse
I'm pretty pleased with mine - I didn't realize they included a sealed wet-wipe (supposedly anti-static and anti-dust formulated), so I ended up with dust particles after I wiped the bare surface down with a Microfiber cloth and rubbing alcohol. Since I figured I had nothing to lose - as I had an obscene number of dust particles under the glass, I decided to pry it out again and wash it using liquid hand soap and water.
Basically I ended up applying it like a Zagg protector using 99% Alcohol in a spray bottle as a liquid base to a) reduce dust particles and prevent water spots, b) shift the Clairvue into position. I ended up with a pretty decent job - there is only one tiny dust particle - small enough that it isn't visible unless you pull up a white background. There is no air bubble surrounding it and it only showed up a week after the initial application.
My friends who also purchased the same protector applied it successfully without the issues - as they were forewarned by me about the wipe, so I guess the wipe really does help in the installation.
They also included 4 plastic buttons for the home button - to make it easier to press the button down - it came in White, Black, Blue and Grey. The issue with these buttons is that they seem like they're for the S3 and not the Note. It still works but its definitely not the proper shape of the Note II button.
There may be a small loss of sensitivity (maybe 1%?) - but I'm not 100% certain as really hard to tell if its the app or the phone. S-Pen functions fine. The glass is really, really smooth compared to plastic ones - well worth the extra cost. Also resists oils very well - requires fewer wipe downs compared to the plastic ones.
I would definitely buy again - and I'm only including what I went through to apply it since I failed to install it correctly - yet it is recoverable and not all is lost. The adhesive layer is strong enough for some washing. I probably wouldn't pry it out now though as the adhesive has probably cured a little bit. I don't believe it's supposed to be reusable.