FYI, Anyone that is considering purchasing the Invisible Shield for their Nexus 7, I just received mine in the mail today and when applied it would not allow the touch screen to operate. I was unable to unlock to access anything, once I peeled away the Invisible Shield everything was fine. Tried to reapply a second time with the same results, just wanted to give all a heads up.
Yet another reason to go xoskins
Sent from my Nexus 7
Had the same problem after I installed my Skinomi screen protector tonight, but after 2 hours everything is fonctionning again.
You have to wait with all screen protectors that are applied with application fluid....
I learned early on that the extra money you pay for Zagg to install the invisibleshield for you is very worth it.
I had absolutely no problem with mine.
http://forum.xda-developers.com/showthread.php?t=1798515
I was going to get one but I decided against it after finding out stylii don't work with them.
Sent from my Nexus 7 using Tapatalk 2
woshiweili said:
I learned early on that the extra money you pay for Zagg to install the invisibleshield for you is very worth it.
I had absolutely no problem with mine.
http://forum.xda-developers.com/showthread.php?t=1798515
Click to expand...
Click to collapse
Except they look like crap and completely ruin the beauty of the nexus according to your pics.
sinbsd said:
Except they look like crap and completely ruin the beauty of the nexus according to your pics.
Click to expand...
Click to collapse
The front looks perfectly fine. You can't even really tell there is something there. The back is subjective. I didn't like it at first but it has grown on me. But no one forces you to have the back anyway.
Nxxx said:
I was going to get one but I decided against it after finding out stylii don't work with them.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
What are you talking about? I don't use styli/styluses but I just tried one it works fine.
matth3wlong said:
FYI, Anyone that is considering purchasing the Invisible Shield for their Nexus 7, I just received mine in the mail today and when applied it would not allow the touch screen to operate. I was unable to unlock to access anything, once I peeled away the Invisible Shield everything was fine. Tried to reapply a second time with the same results, just wanted to give all a heads up.
Click to expand...
Click to collapse
You did not wait for it to dry. You just wasted a perfectly good skin.
digriz said:
You did not wait for it to dry. You just wasted a perfectly good skin.
Click to expand...
Click to collapse
This is why I never install it myself and just pay the guy at the mall to do it. I've never had a problem.
Bought one and had to remove it. It completely distracted from the quality of the screen.
Sent from my Nexus 7 using xda app-developers app
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Basicallyevolve said:
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Click to expand...
Click to collapse
I don't have a single problem with my invisibleshield on my Nexus 7, including the one you mentioned above.
So one of the following must be true:
You have a defective Nexus 7 with under-sensitive touchscreen.
Your InvisibleShield is defective (somehow)
Your installed your InvisibleShield wrong.
I received a Nexus 7 with "extra-sensitive" touchscreen (if something like this exists!)
Does anyone's protector seem a hair too big? A bit of it is going over the bezel. Will this thing shrink?
Sent from my HTC Vision using xda premium
I'm not getting one since the stylus doesn't work with it.
Sent from my Galaxy Nexus using Tapatalk 2
Basicallyevolve said:
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Click to expand...
Click to collapse
youre meant to let it dry...
capacitive screens work by reading the changes in the electrostatic field directly above the screen as you slide your fingers across it. using applicator fluid and the screen protector will restrict the range of the electrostatic field to underneath the screen protector until the screen protector dries. plus, you're putting water on an electronic device... generally not recommended to turn it on until the water's completely gone. it shouldve mentioned this in the installation instructions...
Anyone ever notice the glass looks like it's permeable on these touch devices? Lots of little holes.
But yes, water cuts the conductivity and will do so until completely dry, at least that is the result on this device.
Same results with most wet install screen protectors, it's not any particular brand being the problem... If you read the xoskins, skinomi and xtremeguard threads, people have the same exact "complaint"..
Let it dry man!
YMMV
Basicallyevolve said:
I just put my Zagg on my N7 as well and the screen is no longer responsive. It takes many attempts to get something to even work.
I removed it and all the functionality returned.
I dont know if letting it dry will do anything but i will try. If it doesnt work im ripping this sucker off and returning it to zagg.
I have never had an issue with a zagg product... This is my first time...
Click to expand...
Click to collapse
You have to wait! Letting it dry is the key. Do you think a major company like Zagg would put out a product that ruins devices like that?
Sent from my Nexus 7 using Tapatalk 2
Can I use a hairdryer to make it dry faster?
Hyrax said:
Can I use a hairdryer to make it dry faster?
Click to expand...
Click to collapse
Risk over heating an LCD, I wouldn't.
Besides trying to expedite drying time may cause trapped air bubbles that will take twice as long if ever to stick and will leave a ripple on the protector. YMMV
Related
It's been a while since many of us got the Nexus S. For those of you that decided to go without a screen protector how is your screen now? We know its not Gorilla glass and there has been some debate if one is needed or not. So naked people, how's your screen today? (If you purchased the phone like 4 days ago please ignore this. I'm more curious about people that have had the phone since launch or close to launch)
Sent from my Nexus S using XDA App
Beautiful and scratch/mar free.
Been running naked screen since 12/16 with no regrets.
Got my phone mid-January, and I decided to play it safe. Ghost Armor. Love it and it works great.
I'm considering pulling this ZAGG off of this beautiful Super AMOLED.
Sent from my Nexus S using XDA App
kenvan19 said:
Got my phone mid-January, and I decided to play it safe. Ghost Armor. Love it and it works great.
Click to expand...
Click to collapse
Ghost Armor interested me, but there's no kiosk near here in Los Angeles.
I used to be really good at installing Zagg full bodies and other brands of screen only, but I messed up my last Zagg attempt (my i9000) and am not 100% happy with the outcome, but not unhappy enough to re-do it, so not sure I want to invest the time and money to go with the GA, especially since I would not put it on the screen, just the back.
I used screen protector on my previous phones (G1, nexus one, G2). When I got this phone I realized that I was taking care of my phones just so the second owner will get a almost brand new phone and wasn't enjoying it to it fullest.
I got the Nexus S and there was no way I'm putting cloth on this sexy screen. I'm enjoying the phone to it fullest. No scratches so far, I also take good care of it by dedicating my right packet only for her, no coins no keys, just my nexy.
distortedloop said:
Ghost Armor interested me, but there's no kiosk near here in Los Angeles.
I used to be really good at installing Zagg full bodies and other brands of screen only, but I messed up my last Zagg attempt (my i9000) and am not 100% happy with the outcome, but not unhappy enough to re-do it, so not sure I want to invest the time and money to go with the GA, especially since I would not put it on the screen, just the back.
Click to expand...
Click to collapse
Ooo ya, if there hadn't been a kiosk I wouldn't have done the GA. And you'd have to buy the whole body protection which I'll admit adds sharp corners to the phone that I'm not 100% fond of. I actually took off the side protection because it was just too damn sharp.
By the way, distorted. Have you noticed its pretty much just you and I in the mornings and that we just end up chatting?
kenvan19 said:
By the way, distorted. Have you noticed its pretty much just you and I in the mornings and that we just end up chatting?
Click to expand...
Click to collapse
Yeah, actually I had noticed that you and I tend to hit the same threads at the same time.
Maybe we're just the only ones on the West Coast...everyone else has hit work by now. For them, it's not as much morning as for us.
distortedloop said:
Yeah, actually I had noticed that you and I tend to hit the same threads at the same time.
Maybe we're just the only ones on the West Coast...everyone else has hit work by now. For them, it's not as much morning as for us.
Click to expand...
Click to collapse
Fair enough, though I'm surprised by how early you get up. I'm only up this morning because my wife woke up with a fever so I'm up taking care of her for a bit.
I Zagged my first one but had to return it(TBH i didn't like the zagg but like to keep my phones in tip top condition as i only keep them 6 months.)
anyway CPW replaced my phone last week because the back button wasn't working but I could't transplant the zagg so went naked !
bad decision...although I keep it in a leather pouch, I noticed yesterday there is a small scuff to the screen coating near the earphone.
I love the phone but what a bad decision not to have gorilla glass or factory apply a protector!
I'm going to take it back to CPW and see if they'll replace it under sale of goods as the screen is not performing as expected - no one would expect a scuff within 5 days if their phone is only ever touched by fingers or the felty inside of phone pouch.
kenvan19 said:
Fair enough, though I'm surprised by how early you get up. I'm only up this morning because my wife woke up with a fever so I'm up taking care of her for a bit.
Click to expand...
Click to collapse
I don't sleep much. I was up at 3:00 AM local today, but took a short nap at 4:30 or so.
Getting old sux, you need more sleep, but can't seem to get it!
I hope the wife's not too ill.
Sorry for off-topic to the rest.
no issues whatsoever. Screen protectors r overrated.
I got mine on first launch day, and basically I used that one as my experiment phone just to see how durable the screen was in comparison to my previously owned N1. I had the phone about 2 weeks before I noticed some very light scratches on the screen. Nothing visible head on, you could only see it from an angle with a light source reflecting off of it. For the most part, I kept it in my pocket free of hard items, but there were times when I threw it in my pocket with a few coins and keys in there. My second unit I kept for about a week. I specifically steered clear of sharing my phone with other items in the same pocket. Lo n behold, another small scratch surfaced up on the display. As I said before, it's nothing you can see right off, unless you specifically look for it. Over a short period of time, using this phone without a screen protector, will develop some sort of scratches on it, guaranteed!
Sent from my Nexus S
I have the Nexus S for 10 days now. No screen protectors but I put it in a soft pouch when it's in my pocket. So far pristine.
I've been carrying mine in a ziplock in my pocket. My pockets seem to attract lint like no tomorrow, and I dont
want any getting stuck between the screen and bezel. I wish my cases, soft pouch, and Skinomi skin would show up already.
Phone is pristine, I'm just trying to avoid micro-scratches on the battery cover.
Zardos66 said:
I've been carrying mine in a ziplock in my pocket. My pockets seem to attract lint like no tomorrow, and I dont
want any getting stuck between the screen and bezel. I wish my cases, soft pouch, and Skinomi skin would show up already.
Phone is pristine, I'm just trying to avoid micro-scratches on the battery cover.
Click to expand...
Click to collapse
I use ziplocks for my phone when it's raining (which doesn't happen much here in LA); I don't even need to take out of the bag to make a call or use the phone.
Ive had mine for about 6 weeks now...just before christmas i got it. Up until about a week ago i used it with no screen protector. Its fine as you would expect. But anyway i been using a screen protector for about a week now, and i feel a lot better...i dont have to worry about any little accidents or anything.
Screen responds exactly the same...no issues.
Sent from my Nexus S using XDA App
What protector is the best for clarity? I have a Zagg and it isn't the best for clarity.
I have seen a realook on a captivate and it looks great but they don't make one for the Nexus S.
Sent from my Nexus S using XDA App
csmall said:
What protector is the best for clarity? I have a Zagg and it isn't the best for clarity.
I have seen a realook on a captivate and it looks great but they don't make one for the Nexus S.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Seidio and Steinheil. Clarivue is also good.
Ghost armor all the way! No issues here with it. Had it on my g1 and it kept the phone perfect for 2 years. That one was applied by the kiosk. Don't have one real close to me now in this state but after applying these things now in a few phones I could probably do it in my sleep. Nothing under my screen and it looks and feels great. No clarity issues and it seems the film self heals scratches. You can just barely see orange Peel in certain angles under the light but you can't feel it. I had the zagg before and its utter crap in comparison. The zagg is very bumpy and the thickness of it doesn't feel right on the phone. I've found the ghost armor to fit better as well. I originally wanted a static type like realook but with the curve of the screen it doesn't seem any of those type will fit as flush as this one.
Sent from my Nexus S using XDA App
Link here
$39.99 MSRP use code 'glass' for 25% off ($29.99)
Let me know what you guys think, I am pretty tempted to give it a try... oil and fingerprint resistant.
(after it's in the cart it automatically deducts the 25%)
ordered, will report back with review.
Wow, I wish I would have found this before I ordered my voyager 2, this looks nice. Update us when you get it and install it!
Sent from my Note Deuce using Tapatalk 2
hmm, im interested just because its a dry install!
I use clairvue screen protectors on all my phones, but I'd love to know how the glass ones perform. Really though, what's the advantage if a glass screen protector over the standard ones? I have no issues with the smoothness or the spen on the regular ones.
Sent from my iPad 4th gen using Tapatalk 2
EP2008 said:
I use clairvue screen protectors on all my phones, but I'd love to know how the glass ones perform. Really though, what's the advantage if a glass screen protector over the standard ones? I have no issues with the smoothness or the spen on the regular ones.
Sent from my iPad 4th gen using Tapatalk 2
Click to expand...
Click to collapse
I ordered the glasszone one because of the color options was the main reason but the glass ones are suppose to be way stronger, no scratches and don't show much fingerprints but really its just personal preference.
Sent from my SCH-I605 using xda premium
INCREMENTAL said:
I ordered the glasszone one because of the color options was the main reason but the glass ones are suppose to be way stronger, no scratches and don't show much fingerprints but really its just personal preference.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
glasszone glass sp is not a good sp as it is not 100% clear......there will be lots of lines....
I was going to order one but the website seems to be down. Oh well.
Sent from my SGH-T889 using Tapatalk 2
Any updates
Sent from my SGH-T889 using xda premium
Cerv3r said:
Any updates
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
bump
I've just ordered one now too as the 25% offer ends tomorrow. Will probably get it end of Feb as it's 10-15 days to ship to UK.
Have yet to receive the screen protector, and based off their website I believe this promo is apart of a pre-order. As soon as I receive it I will let you guys know, and include a review.
dylyxcore said:
Have yet to receive the screen protector, and based off their website I believe this promo is apart of a pre-order. As soon as I receive it I will let you guys know, and include a review.
Click to expand...
Click to collapse
I'm not sure it's part of a pre-order because I checked on my order on their website and it's already changed to "shipped". Pretty fast considering I ordered it a few hours ago!
I have received the screen protector, but it might be a couple days before I post a review... just an update though.
dylyxcore said:
I have received the screen protector, but it might be a couple days before I post a review... just an update though.
Click to expand...
Click to collapse
My only real question:
Does the sp go all the way to the edges or is there some gap?
Sent from my SCH-I605 using Tapatalk 2
Any update on reviews? curious on this product as well.
I bought products from Clarivue for years but this last time I bought screens for the HTC DNA. I ended up selling the DNA while the screens were shipping and instead wanted to get Note 2 screens and was even willing to pay all the shipping etc.., but they also wanted me to pay a restocking fee on the DNA screens....even though they had never even been opened!!! The stupid fee along with all the shipping made it easier/cheaper to just order the Note 2 screens and throw the DNA ones away. Needless to say I will never do business with them again and I'd been loyal since my Nexus One days.
It was like 3 or 5 bucks and for a loyal customer of years they wouldn't waive it for me. I would have bought these glass protectors in a heartbeat if not for this...I almost bought them anyway... but stayed strong in the end.
Anyway I hope you guys enjoy them I'm sure they are nice screens. They make nice products but when I needed good customer service it wasn't there.
Any updates/reviews on this. Post seemed to have just stopped. Interested in getting an idea on how the Clarivue HD is working on for whoever has it. Bought the MIME, but I feel like sensitivity was affected when typing. It didn't register the keys all the time. Contacted MIME and they send to send it back for an exchange or refund. Put one of my extra iSmooth sp's back on and I'm happy for now. Just curious about the Clarivue.
simbany1 said:
Any updates/reviews on this. Post seemed to have just stopped. Interested in getting an idea on how the Clarivue HD is working on for whoever has it. Bought the MIME, but I feel like sensitivity was affected when typing. It didn't register the keys all the time. Contacted MIME and they send to send it back for an exchange or refund. Put one of my extra iSmooth sp's back on and I'm happy for now. Just curious about the Clarivue.
Click to expand...
Click to collapse
Been using mine for around a week and a half now. Seems fine. I think once or twice I might have hit a key and it didn't register but not sure that was down to the protector. Haven't noticed anything else to be honest. Works perfectly for me
simbany1 said:
Any updates/reviews on this. Post seemed to have just stopped. Interested in getting an idea on how the Clarivue HD is working on for whoever has it. Bought the MIME, but I feel like sensitivity was affected when typing. It didn't register the keys all the time. Contacted MIME and they send to send it back for an exchange or refund. Put one of my extra iSmooth sp's back on and I'm happy for now. Just curious about the Clarivue.
Click to expand...
Click to collapse
I'm pretty pleased with mine - I didn't realize they included a sealed wet-wipe (supposedly anti-static and anti-dust formulated), so I ended up with dust particles after I wiped the bare surface down with a Microfiber cloth and rubbing alcohol. Since I figured I had nothing to lose - as I had an obscene number of dust particles under the glass, I decided to pry it out again and wash it using liquid hand soap and water.
Basically I ended up applying it like a Zagg protector using 99% Alcohol in a spray bottle as a liquid base to a) reduce dust particles and prevent water spots, b) shift the Clairvue into position. I ended up with a pretty decent job - there is only one tiny dust particle - small enough that it isn't visible unless you pull up a white background. There is no air bubble surrounding it and it only showed up a week after the initial application.
My friends who also purchased the same protector applied it successfully without the issues - as they were forewarned by me about the wipe, so I guess the wipe really does help in the installation.
They also included 4 plastic buttons for the home button - to make it easier to press the button down - it came in White, Black, Blue and Grey. The issue with these buttons is that they seem like they're for the S3 and not the Note. It still works but its definitely not the proper shape of the Note II button.
There may be a small loss of sensitivity (maybe 1%?) - but I'm not 100% certain as really hard to tell if its the app or the phone. S-Pen functions fine. The glass is really, really smooth compared to plastic ones - well worth the extra cost. Also resists oils very well - requires fewer wipe downs compared to the plastic ones.
I would definitely buy again - and I'm only including what I went through to apply it since I failed to install it correctly - yet it is recoverable and not all is lost. The adhesive layer is strong enough for some washing. I probably wouldn't pry it out now though as the adhesive has probably cured a little bit. I don't believe it's supposed to be reusable.
Hi all,
Fitted my Flex HD protector (front and rear, pics below)... Rear fits great height-wise, but a bit short width-wise, not bad in general though... Quite good at applying these protectors and I got it without a single bubble
Front one though was a different story... It was my first ever wet-protector install and I'm not entirely sure about it. The fit is GREAT! Just not sure how well my actual application has gone...
Anyone installed this specific protector on this phone and able to offer any advice on whether the bubbles shown will work themselves out over a few days as it says they should? Doesn't seem to be any dust below, just bubbles
Thanks!
They'll go away. It took mine two days to disappear. the first day I saw a few and tried to move them out and by the second night I couldn't see any bubbles.
you can always take it off and re-install. The pray that comes with it does not work as well as a small bowl of water with a drop of dischwashing soap. Make sure your fingers are good and wet and they with some practice you should be able to get much less bubbles right away. I am a perfectionist and it took me 4 applications to get it perfect. I had zero bubbles as soon as I was done and it took about 1 day for the excess moisture to dry for a perfect application. No hair, dust or bubbles. Surpirsingingly, I really like how this SP feels on the phone, and I always have used tempered glass.
The good thing about a wet application is that you get second chances, unlike glass (at least i my experience)
good luck
Mine looked the same as your's OP, by the end of the night most of the small bubbles were gone. Really hoping the rest of them work themselves out over the next few days. Most comments I've read say they do, so I'm optimistic as I am a perfectionist as well. Can't stand the sight of bubbles or blemishes in my screen protector.
DrkGhst87 said:
Mine looked the same as your's OP…
Click to expand...
Click to collapse
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Thanks all
It seems that after about 12 hours it is looking a lot better, not quite perfect yet though
I also see now there are a couple of bits of dust (I made the mistake of putting it back down on the sheet after taking it off initially to clean the screen again)... Surprisingly though the bits with the dust aren't the worst bubbles, in fact they're not very visible at all
Will give it a few more days then maybe post some more pics for people to see what it is like
It took mine about a week for all the bubbles to work themselves out, but now that the did I can't even tell I have a screen protector on my phone. Really happy with the front protector!
I'm gonna have to redo it as it has dust from when I put it down
But yes the bubbles in general surprisingly are sorting themselves out
Anyone think their screen looks slightly yellowish hue after installing this? I don't recall how mine looked before so I'm really hoping this is so and it's not my actual screen. If it's my screen then I will be exchanging if because it's quite irritating. And it's perfectly white when I hold the screen at an angle instead of dead on.
Sent from my SAMSUNG-SM-G925A using Tapatalk
This is smooth to touch,right?
beda_boy said:
This is smooth to touch,right?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SM-G925A using Tapatalk
---------- Post added at 12:16 PM ---------- Previous post was at 11:49 AM ----------
So anyone notice the screen looking yellow after installing this?
I would simply take mine off and determine that way but then I would have no protection afterwords. So any help would be greatly appreciated.
Sent from my SAMSUNG-SM-G925A using Tapatalk
does that screen protector cover the curves???
oneandroidnut said:
does that screen protector cover the curves???
Click to expand...
Click to collapse
Yes. Covers the entire face of the phone.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Pure+ said:
Yes. Covers the entire face of the phone.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Click to expand...
Click to collapse
interesting i may have to grab one if i get an edge
Kur0ya said:
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Click to expand...
Click to collapse
After 2 days, all blemishes and bubbles are gone. I've had several people say they had no idea there was even a screen protector on until I told them. It feels like glass and doesn't have that rubbery feel to it like how some other "wet" application screen protectors feel. I also don't have any discoloration due to the screen protector either. I can honestly say I love how it looks.
I was very skeptical at first since this was my first "wet" application screen protector. I've always used the one and done "dry" application ones. The application process was very nerve racking with all that "solution" on my phone, and trust me I was with everyone else with how my phone looked initially. But after letting it settle for a few days, I can say I'm glad I went with this screen protector that wraps from edge to edge versus going with one that only covered the top of the screen. I highly recommend it to anyone on the fence :good:
Kur0ya said:
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Click to expand...
Click to collapse
YMMV, some people here claim it goes away but I frankly don't believe them. The orange peel effect is there and in full force even after a week. There's even a bubble that will not go away even though there is no dust underneath. I'm returning this one ASAP and I recommend against anyone buying it.
DrkGhst87 said:
After 2 days, all blemishes and bubbles are gone. I've had several people say they had no idea there was even a screen protector on until I told them. It feels like glass and doesn't have that rubbery feel to it like how some other "wet" application screen protectors feel. I also don't have any discoloration due to the screen protector either. I can honestly say I love how it looks.
Click to expand...
Click to collapse
is it possible you can take multiple front and back photos please?
ThugEsquire said:
YMMV, some people here claim it goes away but I frankly don't believe them. The orange peel effect is there and in full force even after a week. There's even a bubble that will not go away even though there is no dust underneath. I'm returning this one ASAP and I recommend against anyone buying it.
Click to expand...
Click to collapse
yeah.. I like the bubbles happen when lack of liquid and the card isnt used properly and will not come out.
where did you purchase? thoughts on skinomi full protection incl sides?
azibux1 said:
Hi all,
Fitted my Flex HD protector (front and rear, pics below)... Rear fits great height-wise, but a bit short width-wise, not bad in general though... Quite good at applying these protectors and I got it without a single bubble
Front one though was a different story... It was my first ever wet-protector install and I'm not entirely sure about it. The fit is GREAT! Just not sure how well my actual application has gone...
Anyone installed this specific protector on this phone and able to offer any advice on whether the bubbles shown will work themselves out over a few days as it says they should? Doesn't seem to be any dust below, just bubbles
Thanks!
Click to expand...
Click to collapse
I don't think this is brilliant. Those "bubbles" don't look like they'll disappear. Looks like a defective screen protector. Did these ever go away? Wonder if others had the same problem and it is a result of a faulty batch
Kur0ya said:
is it possible you can take multiple front and back photos please?
Click to expand...
Click to collapse
Here's my phone with the FlexHD on after 3 days
And I thought I did a good job. You sir are a master at installing liquid install protectors. If I were to place my phone next to yours it would look like ****, although I did install mine in the car, outside of best buy, on my lap, on a rainy day with no light, because I didn't dare put the phone in my phone or any where else for the drive home.
Oh well, good thing it came with 2 protectors. Can always try again.
Just a PSA for first time Skinomi users. When I put mine on two days ago, it looked like absolute trash and I almost ripped it off immediately. But I didn't.
Two days later and it looks great. Like magic fairies put a new one on while I was sleeping or something.
So, if you try this product, give it at least 2 days before you pass final judgement. Also, put it on at night, let it sit overnight without a case on. When you put it on, after aligning it well and squee-geeing the excess fluid off, take extra time to rub your finger along the curved edges. This will make them tack down very nicely (even though the rest will look like trash, just give it time).
Premature use of a case will most likely cause the edges to pop up. Waiting until the next morning to slap on your case is a good idea.
To clarify, this is regarding the Skinomi Tech Skin Premium HD Clear.
http://www.amazon.com/Skinomi®-Tech...010821&sr=8-1&keywords=galaxy+s7+edge+skinomi
Mind taking some pics of it? I already have mine but don't have the phone yet
Sent from my SM-G920V using Tapatalk
I tried that but mine was cut too long. It wouldn't line up with my camera/home button no matter how I positioned it. I'm not new to installing the or any screen protector so if wasn't too long I would've kept ir on.
Sent from my Nexus 6P using XDA Labs
What's the best available non glass screen protector that fits the full screen and can be used with case, and does not have the rubber friction or orange peel effect, but can be delivered quick to the UK?
tandeh said:
What's the best available non glass screen protector that fits the full screen and can be used with case, and does not have the rubber friction or orange peel effect, but can be delivered quick to the UK?
Click to expand...
Click to collapse
I've always liked Spigens plastic screen protectors. I had to use them on my Nexus 6 since no TGSP would work with its 2.5D edges. I have one of the Spigen's enroute with a ETA of tomorrow, so I'll let you know how it is.
Edit: It's actually arriving today! I just checked the tracking. I've been reluctant to use my S7E all week because I don't have a screen protector and already managed to get a tiny scratch despite 'babying' my phone.
how did you get early? says in stock March 11, 2016...
Some pics would be nice, wanting to get this too and put glass on top lol
so 1 question once I install skinomi skin what happens when I dip my phone in water or like splash water over it since the phone is water resistant. Does the skin come off ?
i ordered that protector and received it already but i dont have the phone yet...but did you get an email from skinomi saying they werent satisfied with the fit on the phone and changed the design up on the protector and is sending out a replacement protector for free...so i guess im gunna be getting a better fitting replacement from them...
lunercrab said:
i ordered that protector and received it already but i dont have the phone yet...but did you get an email from skinomi saying they werent satisfied with the fit on the phone and changed the design up on the protector and is sending out a replacement protector for free...so i guess im gunna be getting a better fitting replacement from them...
Click to expand...
Click to collapse
Thata cool show us some pics when you put em!
lunercrab said:
i ordered that protector and received it already but i dont have the phone yet...but did you get an email from skinomi saying they werent satisfied with the fit on the phone and changed the design up on the protector and is sending out a replacement protector for free...so i guess im gunna be getting a better fitting replacement from them...
Click to expand...
Click to collapse
Yeah I've got 3 so far for my edge, 2 for the regular s7.
Sent from my SM-G920V using Tapatalk
itstee said:
how did you get early? says in stock March 11, 2016...
Click to expand...
Click to collapse
Looks like Skinomi botched the first batch with incorrect sizes and are fixing the issue. They commented on Amazon re the issue to a customer complaining that it didn't fit properly so they probably pulled the stock until its fixed.
Semantics said:
Looks like Skinomi botched the first batch with incorrect sizes and are fixing the issue. They commented on Amazon re the issue to a customer complaining that it didn't fit properly so they probably pulled the stock until its fixed.
Click to expand...
Click to collapse
I can attest to how botched it was. The cut was for a S6E+ sized device and horrible IMO. They aren't the only company that did this, but at least theyre fixing it.
Sent from my Nexus 6P using XDA Labs
itstee said:
how did you get early? says in stock March 11, 2016...
Click to expand...
Click to collapse
I pre-ordered it on Feb 25th, got it on the 29th.
I was surprised.
Semantics said:
Looks like Skinomi botched the first batch with incorrect sizes and are fixing the issue. They commented on Amazon re the issue to a customer complaining that it didn't fit properly so they probably pulled the stock until its fixed.
Click to expand...
Click to collapse
The one I'm using is from the "second batch", fits well.
Gizmo7Neil said:
so 1 question once I install skinomi skin what happens when I dip my phone in water or like splash water over it since the phone is water resistant. Does the skin come off ?
Click to expand...
Click to collapse
Splashing water seems fine, I haven't fully submerged it though.
Pilz said:
I can attest to how botched it was. The cut was for a S6E+ sized device and horrible IMO. They aren't the only company that did this, but at least theyre fixing it.
Sent from my Nexus 6P using XDA Labs
Click to expand...
Click to collapse
They are also offering free replacements to those who purchased the first version so hit them up!
Semantics said:
They are also offering free replacements to those who purchased the first version so hit them up!
Click to expand...
Click to collapse
I already returned it to Amazon, but a replacement just arrived in the mail. I'll probably send it back because they refunded me earlier
Sent from my Nexus 6P using XDA Labs
Pilz said:
I already returned it to Amazon, but a replacement just arrived in the mail. I'll probably send it back because they refunded me earlier
Sent from my Nexus 6P using XDA Labs
Click to expand...
Click to collapse
I bought a supershieldz before I got the phone just to have something and could get something better. Turns out, I need nothing else. I don't even know I have a protector on it. Love that cheap old thing.
Semantics said:
I bought a supershieldz before I got the phone just to have something and could get something better. Turns out, I need nothing else. I don't even know I have a protector on it. Love that cheap old thing.
Click to expand...
Click to collapse
I have the same one and its great! I tried the Spigen (which was okay, but then started to peel) and two wet install ones that were cut oo big. The SuperShieldz is the best one so far!
Sent from my Nexus 6P using XDA Labs
Has anyone had any good experiences with the Tech21 Impact Shield? I was thinking about getting it for my Note 8.
DatBoiRev said:
Has anyone had any good experiences with the Tech21 Impact Shield? I was thinking about getting it for my Note 8.
Click to expand...
Click to collapse
I posted before. But me and my gf have tech21 case and impact shield protector. She's droped 6Xs and myself 3Xs. No cracks or damage.
Check out this video
Nick216ohio said:
I posted before. But me and my gf have tech21 case and impact shield protector. She's droped 6Xs and myself 3Xs. No cracks or damage.
Check out this video
Click to expand...
Click to collapse
Does it go around the curved screen good? Any bubbles?
DatBoiRev said:
Does it go around the curved screen good? Any bubbles?
Click to expand...
Click to collapse
Yeah it does, as long as you install the right way. No bubbles. This video I am going to link you is for impact shield s8 install. Same concept so no biggie. Watch that video a few times so you get it right. Also order it off ebay it's cheaper. Got 1 new $20, I've seen them even lower. They normally go for $40-50 new elsewhere.
I will advise against it just due to how horrible customer service is. If you need to ever have it replaced good luck.
Sent from my Pixel 2 XL using Tapatalk
Nick216ohio said:
Yeah it does, as long as you install the right way. No bubbles. This video I am going to link you is for impact shield s8 install. Same concept so no biggie. Watch that video a few times so you get it right. Also order it off ebay it's cheaper. Got 1 new $20, I've seen them even lower. They normally go for $40-50 new elsewhere.
Click to expand...
Click to collapse
Removing the film number 3 looks dangerous as it looks like this is the period dust can also get in.
Sent from my SM-N950U using Tapatalk
browniegirl said:
I will advise against it just due to how horrible customer service is. If you need to ever have it replaced good luck.
Click to expand...
Click to collapse
I haven't had any issues in that department. They give you issues I take it?
limeybastard01 said:
Removing the film number 3 looks dangerous as it looks like this is the period dust can also get in.
Click to expand...
Click to collapse
Use dust stickers and you won't have any issues with dust. You could also use some tape. Also you will notice there's still bubbles after installation. That's normal after 24-48 hours they disappear.
Nick216ohio said:
I haven't had any issues in that department. They give you issues I take it?
Use dust stickers and you won't have any issues with dust. You could also use some tape. Also you will notice there's still bubbles after installation. That's normal after 24-48 hours they disappear.
Click to expand...
Click to collapse
You're like the only person aside from YouTubers that have had a good experience.
Sent from my Pixel 2 XL using Tapatalk
browniegirl said:
You're like the only person aside from YouTubers that have had a good experience.
Click to expand...
Click to collapse
With customer service? I mean I've heard bad and good with the customer service from others in regards to tech21. Not going to lie it's been about 50/50 Good and bad from various sites user feedback.
I am mostly putting my kneck out for there protection. It seem like people where putting on screen protector incorrectly. I followed that girl in youtube video and have no issues. I will say that the screen protector installation has to many unnecessary steps.
I totally believe you. Was just curious how'd they gave you a bad experience?
Nick216ohio said:
With customer service? I mean I've heard bad and good with the customer service from others in regards to tech21. Not going to lie it's been about 50/50 Good and bad from various sites user feedback.
I am mostly putting my kneck out for there protection. It seem like people where putting on screen protector incorrectly. I followed that girl in youtube video and have no issues. I will say that the screen protector installation has to many unnecessary steps.
I totally believe you. Was just curious how'd they gave you a bad experience?
Click to expand...
Click to collapse
I'm still waiting on a replacement case for my 7 plus from August of 2017, this is the third one they sent out to me but I still have yet to receive
Sent from my Pixel 2 XL using Tapatalk
browniegirl said:
I'm still waiting on a replacement case for my 7 plus from August of 2017, this is the third one they sent out to me but I still have yet to receive
Click to expand...
Click to collapse
That's ridiculous. I can see why your PO. Sounds like they're giving you the runaround and probably didn't even send 1 smh.
I'm wanting to get the Evo Tactical, but it won't ship when I have it in my cart. It will say there are no quotes at the time, but I can order a screen protector no problem. I contacted support earlier today, I didn't expect them to get back to me that quick, but hopefully they can help.
browniegirl said:
I'm still waiting on a replacement case for my 7 plus from August of 2017, this is the third one they sent out to me but I still have yet to receive
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
The first EVO wallet came over here with three scratches on the top. Chatted with Tech21, submitted a picture during chat and got a replacement in perfect condition within a few days. They don't wanted me to return the scratched case. Using the scratched one now and have another one as replacement. Perfect service. Don't they submitted a tracking nr. to you?
Gesendet von meinem SM-N950FD mit Tapatalk
Nick216ohio said:
I haven't had any issues in that department. They give you issues I take it?
Use dust stickers and you won't have any issues with dust. You could also use some tape. Also you will notice there's still bubbles after installation. That's normal after 24-48 hours they disappear.
Click to expand...
Click to collapse
I find tape leaves marks to be honest. I also find not many people supply the dust removers in their packaging these days.
During the application process in the video, it shows removing film number 3. Whilst removing film number three the other hand is applying the film thus if dust lands during the number 3 process one is screwed?
I'd like to try this film as I think the material used is similar to the ONN Walmart Note 8 and s8plus screen protectors. Almost like glass but not quite. The latter would have been perfect non glass screen protectors if only they worked. Edges lifted.
I'm currently back to the same sort of screen protector that I had when I first bought my N8. The wet applied clear film that has a 2.5mm gap all the way around the edges. Seems to be the only solid ones out there. Made by Skinomi, Illumishield, Armousuit etc , $60 or so dollars later LOL
The Spigen wet applied film was nice with smaller gaps, but the peel on the film was a joke.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
I find tape leaves marks to be honest. I also find not many people supply the dust removers in their packaging these days.
During the application process in the video, it shows removing film number 3. Whilst removing film number three the other hand is applying the film thus if dust lands during the number 3 process one is screwed?
I'd like to try this film as I think the material used is similar to the ONN Walmart Note 8 and s8plus screen protectors. Almost like glass but not quite.
Click to expand...
Click to collapse
Masking tape is the best for this if you're going to use tape. Yeah I don't like how they don't include dust stickers with it. Also you can go to dollar store and use kids stickers. They also work for the cheap alternative. I'd go with that option.
I followed video to the T and bubbles from air pockets 24 hours later where gone. Make sure your hands clean and not in a dusty room. Bright light will help too. Because you will see dust beforehand. One more thing do it on a table.
Nick216ohio said:
Masking tape is the best for this if you're going to use tape. Yeah I don't like how they don't include dust stickers with it. Also you can go to dollar store and use kids stickers. They also work for the cheap alternative. I'd go with that option.
I followed video to the T and bubbles from air pockets 24 hours later where gone. Make sure your hands clean and not in a dusty room. Bright light will help too. Because you will see dust beforehand. One more thing do it on a table.
Click to expand...
Click to collapse
Yeah,I always put a bright table lamp and a magnifying headset on for these type of tasks.
Sent from my SM-N950U using Tapatalk
Really surprised not many folks on here have used the Tech21 bullet shield screen protector on the Note 8 .
Feedback would be nice.
Sent from my SM-N950U using Tapatalk
What do you want to now? Mine is perfect ,using it since september . It is very easy to install just follow the instructions .
Sent from my SM-N950F using XDA Free mobile app
ferrarinogiallo said:
What do you want to now? Mine is perfect ,using it since september . It is very easy to install just follow the instructions .
Sent from my SM-N950F using XDA Free mobile app
Click to expand...
Click to collapse
I wanted to know how comes no one has said much about it on here.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
I wanted to know how comes no one has said much about it on here.
Click to expand...
Click to collapse
They're not the most popular I suppose? Some people there customer service rubbed them the wrong way. But you see most us who have that brand stand by it.