Database Develop

[Q] Galaxy Note Upgrade to 4.1.2 from ICS stock ROM iSSUE

Hi,
I Tried to install leaked jelly bean from the video provide by cursed4eva in youtube.
I did all the steps mentioned in video, but the phone hangs at boot animation. It shows some /emmc/ instead of /sdcard/
How can I go back to ICS again... Plz help me in this issue..
Thanks,
Nikhil

Flash the stock ics using odin and phone in download mode.

Hey Thanks for the reply.. But Where can I find the stock ICS.

nike5650 said:
Hi,
I Tried to install leaked jelly bean from the video provide by cursed4eva in youtube.
I did all the steps mentioned in video, but the phone hangs at boot animation. It shows some /emmc/ instead of /sdcard/
How can I go back to ICS again... Plz help me in this issue..
Thanks,
Nikhil
Click to expand...
Click to collapse
nokiamodeln91 said:
Flash the stock ics using odin and phone in download mode.
Click to expand...
Click to collapse
Dont forget to flash a Safe hernel once u intsall stoc ics..

Download the stock ics rom from samfirmware.com or from Dr Ketan sticky thread in Android Original Dev section.
Do not do any wipes on ics stock kernel.

Mate try this link
http://androidadvices.com/install-jellybean-412-xxlsa-firmware-galaxy-note-n7000/
Sent from my GT-N7000 using xda app-developers app

Thanks guys..
I will try that and update here.

VinayakG30 said:
Mate try this link
androidadvices.com/install-jellybean-412-xxlsa-firmware-galaxy-note-n7000/
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
A quick question, my Note isn't rooted and as far as I know running the stock kernel.
Is this method above in the link OK to install Jellybean without a risk to bricking it ?

Shyam said:
Dont forget to flash a Safe hernel once u intsall stoc ics..
Click to expand...
Click to collapse
Thanks a lot guys, I was able to install stock ics.
Which one is safe kernel.

nike5650 said:
Thanks a lot guys, I was able to install stock ics.
Which one is safe kernel.
Click to expand...
Click to collapse
Hydracore, Philz, Speedmod..they all have the emmc_cap_erase command disabled/removed...

brightonskaterdude said:
A quick question, my Note isn't rooted and as far as I know running the stock kernel.
Is this method above in the link OK to install Jellybean without a risk to bricking it ?
Click to expand...
Click to collapse
Flashing via odin is safe.

[Q] Can't flash Jelly Bean, Help please!

Hi guys,
I have CivZ_FlexIcer and I love it but I really wanted Jelly Bean, so I flashed it. I kept it for a day and then tried to do something, after that something failed I tried to restore the backup of Jelly Bean I made and it was obviously corrupt because I got stuck on the LG logo. I then NVflashed stock ICS and restored a FlexIcer backup that worked fine. Everytime I try to flash Jelly Bean I get a Status 7 error, I tried the method where you edit the updater script and it installs but after restart the phone gets stuck on the LG logo and I can't mount /system in CWM. No matter what ROM, I always get this error, but ICS roms work fine. I've updated CWM and everything but now I'm stuck on ICS. Please help me!
Thanks,
Kai

You should start by reading this -
http://forum.xda-developers.com/showthread.php?p=39322877
As you haven't said which rom you are trying to flash, that's as much help as anyone can give you
Sent from my LG-P990 using Tapatalk 2

kingvortex said:
You should start by reading this -
http://forum.xda-developers.com/showthread.php?p=39322877
As you haven't said which rom you are trying to flash, that's as much help as anyone can give you
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
Oh sorry, uhm I'm trying to flash ParanoidAndroid and Kowalski kernel.

Make sure you have the new bootloader versions of the rom and kernel.
Sent from my LG-P990 using Tapatalk 2

Are you on P990 or SU660?

takeoutttt said:
Are you on P990 or SU660?
Click to expand...
Click to collapse
I'm on the P990

I fixed it! All I had to do was flash pengus77's CM10 for the new bootloader and his recovery, then flash the ROM and kernel and it works
Thanks for the help anyway guys.

[Q] Samsung Galaxy S Advance Lag issue after Update thorugh Samsung KIES

I recently updated my Samsung Galaxy S Advance with JB 4.1.2 through Samsung KIES software. Earlier my phone wasn't lagging with the Android GB version, and I was able to play games without any lag. After updating it to JB 4.1.2, I'm experiencing lagging when I play games or browse internet.
I haven't updated any ROM, I purchased a new phone, connected the phone to KIES using USB cable. As soon as this connection was successful, it should me a notification that a new Android version(JB) is available, hence I updated it.
Please provide me some solutions so that I can remove this lag.

Enter recovery mode. Factory reset, wipe cache.

Root, custom kernel and remove bloatware. Thats all you can do on stock to feel better.
Sent from my GT-I9070 using xda premium

arffrhn said:
Enter recovery mode. Factory reset, wipe cache.
Click to expand...
Click to collapse
Will that work perfectly because i need to update to jelly bean.....
Shall i update it through kies or odin?
What its the stable firmware?
Sent from my GT-I9070 using xda app-developers app

shashank g said:
Will that work perfectly because i need to update to jelly bean.....
Shall i update it through kies or odin?
What its the stable firmware?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Any method is the same cause in the end you'll still need to do factory reset as updating from gb to jb is a major update. Xxlqe and ddulp8 seems good.

arffrhn said:
Any method is the same cause in the end you'll still need to do factory reset as updating from gb to jb is a major update. Xxlqe and ddulp8 seems good.
Click to expand...
Click to collapse
Official update in india gives which firmware?
Sent from my GT-I9070 using xda app-developers app

shashank g said:
Official update in india gives which firmware?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
DDULP8.

nawaz.sp said:
I recently updated my Samsung Galaxy S Advance with JB 4.1.2 through Samsung KIES software. Earlier my phone wasn't lagging with the Android GB version, and I was able to play games without any lag. After updating it to JB 4.1.2, I'm experiencing lagging when I play games or browse internet.
I haven't updated any ROM, I purchased a new phone, connected the phone to KIES using USB cable. As soon as this connection was successful, it should me a notification that a new Android version(JB) is available, hence I updated it.
Please provide me some solutions so that I can remove this lag.
Click to expand...
Click to collapse
Same here. Flashed the following, results are better than stock gb
Kernel : CoCore E 6.8
ROM : Pure Vanilla v5 build 2
Sent from my GT-I9070 using xda app-developers app

arffrhn said:
Enter recovery mode. Factory reset, wipe cache.
Click to expand...
Click to collapse
As you said, I did factory reset and cleared cache as well, but in vain. My phone still lags.
Does anybody have any other method? Downloading custom kernel will void my warranty, so I don't wanna do it.
Does reverting back to GingerBread is the only option?
Thanks Razvan and others for replying.
Thanks in advance.

nawaz.sp said:
As you said, I did factory reset and cleared cache as well, but in vain. My phone still lags.
Does anybody have any other method? Downloading custom kernel will void my warranty, so I don't wanna do it.
Does reverting back to GingerBread is the only option?
Thanks Razvan and others for replying.
Thanks in advance.
Click to expand...
Click to collapse
You don't have to worry about warranty because rooting and flashing custom roms/kernel for jb is hassle free and does not trigger your binary count. So, that means when you want to claim your warranty, just flash back your country official firmware and you get back your warranty. As long as you do everything right and you don't lose your download mode (means you don't brick your device) you have nothing to worry about regarding the warranty.
You can also revert back to gb if you want but I prefer to stay with jb for the apps I use. It's not a massive lag for me. Just slight delay when opening dialer, contacts and camera but the rest is awesome.
Sent from my GT-I9070 using xda app-developers app

arffrhn said:
You don't have to worry about warranty because rooting and flashing custom roms/kernel for jb is hassle free and does not trigger your binary count. So, that means when you want to claim your warranty, just flash back your country official firmware and you get back your warranty. As long as you do everything right and you don't lose your download mode (means you don't brick your device) you have nothing to worry about regarding the warranty.
You can also revert back to gb if you want but I prefer to stay with jb for the apps I use. It's not a massive lag for me. Just slight delay when opening dialer, contacts and camera but the rest is awesome.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Thanks arffrhn for the reply.
Can you please help me with the steps of flashing the custom ROM, to remove this lag? Also can you please let me know which custom ROM is better, with lesser or no lag?
Thanks in advance.

nawaz.sp said:
Thanks arffrhn for the reply.
Can you please help me with the steps of flashing the custom ROM, to remove this lag? Also can you please let me know which custom ROM is better, with lesser or no lag?
Thanks in advance.
Click to expand...
Click to collapse
Here, you can follow this guide here. Make sure you read everything and do exactly as it says.
It is recommended that you back up your imei. Follow this guide here.
For stock based, many users said that LightJB is great. You can try that but I prefer to use Pure Vanilla because of the looks. You can also try cm-based roms although it's still in beta phase. Look in the original android development section.
Edit: Btw, which version you have? I9070 or I9070P? Make sure to check that first before flashing anything. You can see that at start up and also at about phone in settings.

arffrhn said:
Here, you can follow this guide here. Make sure you read everything and do exactly as it says.
It is recommended that you back up your imei. Follow this guide here.
For stock based, many users said that LightJB is great. You can try that but I prefer to use Pure Vanilla because of the looks. You can also try cm-based roms although it's still in beta phase. Look in the original android development section.
Edit: Btw, which version you have? I9070 or I9070P? Make sure to check that first before flashing anything. You can see that at start up and also at about phone in settings.
Click to expand...
Click to collapse
I have I9070.

Lag
arffrhn said:
Enter recovery mode. Factory reset, wipe cache.
Click to expand...
Click to collapse
when doing this,will it delete also my installed and downloaded apps on my device?

Salvatore08 said:
when doing this,will it delete also my installed and downloaded apps on my device?
Click to expand...
Click to collapse
Yes. But you can root phone and use Titanium backup to backup apps.
Sent from my GT-I9070 using Tapatalk

Twrp without root

Can I flash twrp recovery using odin without root?
Sent from my GT-I9070 using xda premium

Which android version are you on? For JB,there is only in CoCore-E kernel and you can flash by using Universal Kernel Flasher or via CWM.
Answering the questions and helping you is my favourite.

razavakil7995 said:
can i flash twrp recovery using odin without root?
Sent from my gt-i9070 using xda premium
Click to expand...
Click to collapse
no you cant

phyowaiummg said:
Which android version are you on? For JB,there is only in CoCore-E kernel and you can flash by using Universal Kernel Flasher or via CWM.
Answering the questions and helping you is my favourite.
Click to expand...
Click to collapse
I've heard it's not compatible in jelly bean. I'm currently on gingerbread, but if I flash Jelly bean, is there a risk of bricking or will the recovery be as it is??
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
I've heard it's not compatible in jelly bean. I'm currently on gingerbread, but if I flash Jelly bean, is there a risk of bricking or will the recovery be as it is??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Who said that TWRP is not compatible with Jellybean? And no there is no risk of bricking your phone if you flash or update to Jellybean (but don't flash the Chinese firmware - I've heard that some people bricked their phone by doing that)... Just be sure that the firmware you will be flashing is the "right" one... I suppose that you are running the Indian Gingerbread firmware - so you can officially update to DULP8 (but backup all you data, apps, etc . first)... And yes, root it and install CoCore E 6.2 or 6.8 kernel - it has TWRP 2.5 with it...

Sami Kabir said:
Who said that TWRP is not compatible with Jellybean? And no there is no risk of bricking your phone if you flash or update to Jellybean (but don't flash the Chinese firmware - I've heard that some people bricked their phone by doing that)... Just be sure that the firmware you will be flashing is the "right" one... I suppose that you are running the Indian Gingerbread firmware - so you can officially update to DULP8 (but backup all you data, apps, etc . first)... And yes, root it and install CoCore E 6.2 or 6.8 kernel - it has TWRP 2.5 with it...
Click to expand...
Click to collapse
Ok but it is written that cocore kernel 6.8-or-something version is only compatible with jb. And I meant that flasing twrp when on jb is not supported. It was written on the thread. And by the way I am on JPLK2 firmware so is it safe to flash that kernel over twrp?.. I'm relatively newb to kernels but not custom roms, so it may seem like a noob question... my apologies
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
Ok but it is written that cocore kernel 6.8-or-something version is only compatible with jb. And I meant that flasing twrp when on jb is not supported. It was written on the thread. And by the way I am on JPLK2 firmware so is it safe to flash that kernel over twrp?.. I'm relatively newb to kernels but not custom roms, so it may seem like a noob question... my apologies
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Well if you are on gingerbread you need to flash the diego's twrp. If you update to jelly bean you have to flash cocore or thunderzap with twrp
Sent from my GT-I9070 using Tapatalk 4 Beta

KINGbabasula said:
Well if you are on gingerbread you need to flash the diego's twrp. If you update to jelly bean you have to flash cocore or thunderzap with twrp
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ok thanks. And by the way if I flash a custom rom which is jb based over twrp, will I lose the recovery
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
Ok thanks. And by the way if I flash a custom rom which is jb based over twrp, will I lose the recovery
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
No but you can flash just cm based rom on gb
Sent from my GT-I9070 using Tapatalk 4 Beta

KINGbabasula said:
No but you can flash just cm based rom on gb
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
No. Galaxperia is jb stock based rom. You need to be on jellybean first to flash that. Once you're on jb, you can flash with either twrp/cwm. If you flash that while you're on gb, you're gonna stuck at bootscreen.

arffrhn said:
No. Galaxperia is jb stock based rom. You need to be on jellybean first to flash that. Once you're on jb, you can flash with either twrp/cwm. If you flash that while you're on gb, you're gonna stuck at bootscreen.
Click to expand...
Click to collapse
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
You need to stop worrying about "bricking your phone"... as long as you know what you are doing, nothing bad should happen to your phone... and Yes you will lose TWRP... but after updating to JB you can easily root it and install CoCore E kernel with TWRP.....

RazaVakil7995 said:
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Custom recovery (TWRP in your case) is on the same partition as kernel is. By flashing stock firmware kernel partition is getting wiped and new kernel with stock recovery will be instaled. First try to understand what is happening when you do something, and you will not have anything to worry about.
Againg what is already said - you can't install JB custom ROM on GB, and you can't install GB custom ROM on JB. Flashing firmware with Odin will not brick your phone, but only if you use firmware for your phone. If you have I9070P, I9070 firmware will brick it. And otherwise, if you have I9070, I9070P will brick it. Hard brick.
If you want TWRP you have to install kernel with TWRP embended in side of it. Rooting will not harm your phone, it just insert SU file that enable having root permissions.
Послато са GT-I9070 користећи Тапаток 2

shut_down said:
Custom recovery (TWRP in your case) is on the same partition as kernel is. By flashing stock firmware kernel partigion is getting wiped and new kernel with stock recovery will be instaled. First try to understand what is happening when you do something, and you will not have anything to worry about.
Againg what is already said - you can't install JB custom ROM on GB, and you can't install GB custom ROM on JB. Flashing firmware with Odin will not brick your phone, but only if you use firmware for your phone. If you have I9070P, I9070 firmware will brick it. And otherwise, if you have I9070, I9070P will brick it. Hard brick.
If you want TWRP you have to install kernel with TWRP embended in side of it. Rooting will not harm your phone, it just insert SU file that enable having root permissions.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
All right. I was doubtful because in my Micromax canvas 2, all I needed to do was to wipe /system,/data,cache partition and dalvik cache and I could flash just about any custom rom, so I was a little confused on this one. Thanks
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
For galaxperia you have to update to jelly bean

[Q] Unable to start Galaxperia v2 rom

hi there i rooted and installed Galaxperia v2 custom rom developed by achyut as instructed from the following thread using cwm
http://forum.xda-developers.com/showthread.php?t=2206406
the installation went fine and upon rebooting the phone i could only see the sony xperia logo followed by the xperia animation. i waited for nearly 1h and still there wasn't any change in the screen. PS i had cleared my cache and erased all the data prior to the installation. i tried repeating the same steps over and over for some 2-3 days and its still the same. getting stuck in the same screen. kindly help me out with this.
regards,
gokul
s advance i9070

gokulharidas said:
hi there i rooted and installed Galaxperia v2 custom rom developed by achyut as instructed from the following thread using cwm
http://forum.xda-developers.com/showthread.php?t=2206406
the installation went fine and upon rebooting the phone i could only see the sony xperia logo followed by the xperia animation. i waited for nearly 1h and still there wasn't any change in the screen. PS i had cleared my cache and erased all the data prior to the installation. i tried repeating the same steps over and over for some 2-3 days and its still the same. getting stuck in the same screen. kindly help me out with this.
regards,
gokul
s advance i9070
Click to expand...
Click to collapse
You did factory reset? If yes, redownload ROMs zip, maybe it is corupted.
Послато са GT-I9070 користећи Тапаталк 4

shut_down said:
You did factory reset? If yes, redownload ROMs zip, maybe it is corupted.
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
i wiped the cache and data prior to the installation. i didnt do the factory reset. unfortunately there isnt any other link to download the rom other this.
http://forum.xda-developers.com/show....php?t=2206406
do you have any other link where i can download the rom form?

gokul haridas;45935214
said:
i wiped the cache and data prior to the installation.. unfortunately there isnt any other link to download the rom other than this and i don't think so the file is corrupted coz i was able to install. i didnt get any error codes during my installation
http://forum.xda-developers.com/show....php?t=2206406
do you have any other link where i can download the rom from?[
Click to expand...
Click to collapse

which was the previous rom. stock rooted ? or u were using Cyanogen mode or something.if u were using Cynogen mode please flash any custom kernal also ; like cocore e 7 or 8. if u were in stock rooted, ofcourse do a factory reset also

ajeshmanu said:
which was the previous rom. stock rooted ? or u were using Cyanogen mode or something.if u were using Cynogen mode please flash any custom kernal also ; like cocore e 7 or 8. if u were in stock rooted, ofcourse do a factory reset also
Click to expand...
Click to collapse
i was on cynagen mode 10.1 prior to my installation. i then wiped my cache and also the data and did a factory reset as well and tried. still it did no help. i am stuck on that same screen where the xperia animation is being played. i then switched to stock jb using odin and the tried installing the same but still the same prob. did it some 10 times or more today. how long did it took for u guys to boot to the rom after installing the galaxperia rom? coz i nearly waited for some 1h and 10 mins back i tried again and m still stuck there where i was earlier.

gokulharidas said:
i was on cynagen mode 10.1 prior to my installation. i then wiped my cache and also the data and did a factory reset as well and tried. still it did no help. i am stuck on that same screen where the xperia animation is being played. i then switched to stock jb using odin and the tried installing the same but still the same prob. did it some 10 times or more today. how long did it took for u guys to boot to the rom after installing the galaxperia rom? coz i nearly waited for some 1h and 10 mins back i tried again and m still stuck there where i was earlier.
Click to expand...
Click to collapse
cm has its own kernal.so wen u r flashing another rom after cm, need to install kernal also.in ur case u can use COCORE E 7 OR 8 by cocafe.
so before flashing do factory reset , cache partition and dalvik cache.flash the rom , wen complete flash the kernel also. and it will take hardly 10 min. if no luck then better redownload the rom using any download manager

gokulharidas said:
i was on cynagen mode 10.1 prior to my installation. i then wiped my cache and also the data and did a factory reset as well and tried. still it did no help. i am stuck on that same screen where the xperia animation is being played. i then switched to stock jb using odin and the tried installing the same but still the same prob. did it some 10 times or more today. how long did it took for u guys to boot to the rom after installing the galaxperia rom? coz i nearly waited for some 1h and 10 mins back i tried again and m still stuck there where i was earlier.
Click to expand...
Click to collapse
Look on what stockrom it was based
Sent from my GT-I9070 using xda app-developers app

Phoneboot said:
Look on what stockrom it was based
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
stock rom was JB 4.1.2

gokulharidas said:
stock rom was JB 4.1.2
Click to expand...
Click to collapse
Yes but xxlqb or ......
I had it installed but i dont know what fw i used and it worked fine, these days i use Harsh jelly
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 04:53 PM ---------- Previous post was at 04:35 PM ----------
I looked it was based on xxlpz rom
Sent from my GT-I9070 using xda app-developers app

Phoneboot said:
Yes but xxlqb or ......
I had it installed but i dont know what fw i used and it worked fine, these days i use Harsh jelly
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 04:53 PM ---------- Previous post was at 04:35 PM ----------
I looked it was based on xxlpz rom
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
i am on I9070DDULP8 (indian version)

gokulharidas said:
i am on I9070DDULP8 (indian version)
Click to expand...
Click to collapse
Maybe its not compatible with that rom
Sent from my GT-I9070 using xda app-developers app

Phoneboot said:
Maybe its not compatible with that rom
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
hmm maybe.. hows this harshjelly v2.2? will i b able to run it? if so can u provide me the link to? personally i loved this galaxperia rom is there any other rom similar to it or any rom that would give the xperia z or z1 feel on my s advance

gokulharidas said:
hmm maybe.. hows this harshjelly v2.2? will i b able to run it? if so can u provide me the link to? personally i loved this galaxperia rom is there any other rom similar to it or any rom that would give the xperia z or z1 feel on my s advance
Click to expand...
Click to collapse
I use Harsh jelly v2.1 with cocore. V8. 0 and it works fine low on battery usage to, i alzo installed xperia keyboard on it
Sent from my GT-I9070 using xda app-developers app

If flashing kernel doesn't work
You can always try to flash stock few through Odin
Or have a backup of any stock with you

You need to be on stock based rom (kernel must be stock) to install another stock based rom. Only way you can install some stock based rom over cm is if that rom has embended stock kernel (or some mod of it like cocore). If you install it over cm kernel you will end up with bootloop. So now it is best to flash stock fw with odin, root, install cocore and than this rom. Or with Universal kernel flash, install cocore from cm and copy rom before booting to recovery. You will not be able to boot into cm after installing cocore. And you must unzip kernel.bin.md5 from cocore zip to be able to install it with Universal kernel flash.
Послато са GT-I9070 користећи Тапаталк 4