Database Develop

Deleted My HTC Wizard Radio Rom

I was tryin to update the radio rom on my MDA and i i was usin the RUU and i guess i did somethin wrong cause now thers a X where the active sync is and a exclamation point where my reception bar is, also wen i go to about device i dont see the radio rom where the others ones are listed. So i downloaded the universal radio gsm exe but it doesnt recogize my device even thought it pluged in my microsoft active sync does recognize it either. and now its runs extremly slow, could someone give me some insite to wat i have done wrong and how i can fix it,
Thanks klawdlan
PS i am runin the orginal firm that came wit my mda US-Tmobile

The radio for the Universal will not work in the Wizard.

so what should i do to fix my prob

Download a Radio Rom (as an example you could try the Cingular 2.25 Radio Rom) for the Wizard on the XDA FTP

my pc is nto recognize it after i deleted the radio firm, even wen i plug in the wall charger thers no indication thats its chargin.

Can you get in bootloader mode by pressing the camera button (and hold it) and then doing a soft-reset?
If you get the tri-color screen, THEN try to update the Radio Rom, if that doesn't work, then you are in deep **** I guess!

yea i can get to that screen

Then go into that screen and flash the Radio Rom!
The Radio Rom is located here: ftp://xda:[email protected]/Wizard/Radio_Roms/wizard_radio version-2.25.zip
Good luck.

how will i get the rom to the pda if it wont even recognize it in microsoft synce, i cant even browse the device wen i go to my computer?

Listen carefully!!
- Connect your device via the cable to your PC.
- Get your device in the bootloader (tricolor-screen) mode.
- Unzip the zip file with the Radio Rom
- Go into to folder you unzipped it in
- Doubleclick the .exe file and follow instructions on your screen!
Good luck!
p.s. You flash Roms from your PC to your device, you dont flash Roms "on the device itself".
p.s.2 Maybe it will be smart to do a hard-reset afterwards (because your device is very very slow, look at my post in this topic on how to do a hard-reset http://forum.xda-developers.com/viewtopic.php?t=56145&highlight= ).

i did everythin u said word for word wen ruu was runin this came up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i continued and in about device it doesnt show a radio rom

Just continue!!
Just press Next or Continue until it starts flashing or gives an error!

i did and i still get no radio rom in the end

Dont pay attention whats on your screen.
You can end up with 2 things:
1) You get an error and the update failed.
2) The flashing begins and you will get a message when it's done!
Molski

i get the message that its done and that i flashed, but in im in wm5 and i go to systems about device i still dont see a radio rom

Then grab a Full Rom from here: ftp://xda:[email protected]/Wizard/Roms
And flash the Full Rom the same way I decribed for flashing only your Radio Rom.
Good luck pal !
p.s. When you turn on your device, don't you see a Radio Rom (GSM version number in your top-left corner?

alright ima try it now, thanks

PRAISE BE UNTO molski FOR HE HAS HELPED ME FIX MY FONE, thanks man i got a hang of this update thing now, learned mucho mucho i would make a new thread in ur honor if it were proper forum edicate

It's never wrong to thank someone (especially me in a new thread haha)
I'm glad your phone is working again that and you learned how to do things like flashing your Wizard!
And now you can play around with it....you know what to do if something goes wrong
Regards,
Molski.

Need help flashing rom. Stickies don't help. {pix}

So I downloaded a wm6 rom, and I get a zip with 6 files in it. I don't know which one I should open to start the flashing process. the sticky never told you how to actually flash the rom, just what you should do/the pre-requesites before you flash.
They files are:
EnterBootLoader
RUUGetinfo
nk.nbf
RUUResource.dll
Vista_ROMUpdate utility
XP_ROMUpdate utility
here's the pic I included:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes, I read the stickies, but they are not giving me any information on how to do this.
Thanks!

If you have Vista on your pc use the Vista rom update utility. If you have XP, use the xp rom update utility. MAKE SURE YOUR PHONE IS CID/SIM UNLOCKED FIRST!!!
If not, follow the directions in the unlocking for dummies sticky by Dr P.
Make sure you have a usb connection via active-sync, and your pc screensaver is disabled, and you have a good 10 minutes for the flashing process. Once you choose Vista or XP, simply click then follow the directions...make sure you tick any/all boxes before hitting next or update.
**I attached a pic for you**

akashastrega said:
If you have Vista on your pc use the Vista rom update utility. If you have XP, use the xp rom update utility. MAKE SURE YOUR PHONE IS CID/SIM UNLOCKED FIRST!!!
If not, follow the directions in the unlocking for dummies sticky by Dr P.
Make sure you have a usb connection via active-sync, and your pc screensaver is disabled, and you have a good 10 minutes for the flashing process. Once you choose Vista or XP, simply click then follow the directions...make sure you tick any/all boxes before hitting next or update.
**I attached a pic for you**
Click to expand...
Click to collapse
Thank you! so I don't need to enter my phone into boot loader mode or anything?

theonlyisamu said:
Thank you! so I don't need to enter my phone into boot loader mode or anything?
Click to expand...
Click to collapse
No, the RUU will set the phone into bootloader during the process. Knowing how to get into bootloader is helpfull in the undesired event that something goes wrong during the flash. Remember to remove your memory card before flashing.

Flashed another device´s ROM into Rhodium and bricked :(

Hi,
A friend has a CDMA Sprint Rhodium, and he tried to install with a Raphael ROM into Rhodium and since that device won´t turn on.
When connected to PC turns the led in red and it says "Qualcomm CDMA MSM driver needed" but nothing happens...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there anything I can do to help him? or device can´t be repared?
Any advice is welcome
Thanks in advance,

i think you should contact jockie

Thanks for the advice, I´ll contact him.

Can he get the phone into the bootloader ?
Not sure that driver message is connected with the problem though, when you turn on a GSM Rhodium connected to the computer it normally wants a CDMA driver.

well, if the device is making a connection with the computer, then it's turning on. it may not be displaying anything, but at least you know it's still working. so, remove any SD card you may have and if you have a SIM card, remove it (i believe you said CDMA, but you are in the GSM forum, so...) Now, this will take some dexterity. first, remove the battery. Now, while depressing the volume down key slip the battery into the phone and quickly press and release the power key while still holding down the volume down key. either instantly or within a few seconds you should get the tri color screen. once this occurs, try hooking the phone back into your PC and running a custom ROM that is for the proper make and carrier style

guys, hes not a newbie, and knows about bootloader mode
this case isnt regular, so i advised a man who can really help with it, as i got help in similar situation

The "Qualcomm CDMA" driver installation comes up on your PC even on GSM phones.

try to download this driver from internet, it's for windows xp
then inter the bootloader and flash the original rom

hehe, the problem is not in drivers, drivers isnt a problem, you can use practically any qualcomm device driver (e.g. motorola Q)
the htc usb interface cant be found here (htc usb sync)

Can you get into bootloader screen or wont that even come up? If it does best thing would be to put a stock rom on an Sd card and flash from there.

I guess this is the problem that Nykoon had few days ago.
See, the phone has Raphael's bootloader. The CPU aren't the same (MSM7200A vs 7201A), nor the rest of the board. The bootloader can't make USB sync, so it somehow probably goes into some failsafe bootloader... but without proper files from HTC it can't be recovered.
Maybe jockyw can do something about it, but all at all - JTAG will work fine.
For all - that device doesn't go even to bootloader probably. If it went into bootloader, you would see at least HTC USB Sync (or microsoft usb sync). We tried with Nykoon on ICQ many things, but no way of flashing anything on it.

Thanks a lot guys, with your guidance we were able to bring it alive!!!
Thanks a lot to all
-----------
Vote, check my sig!

Hi, can you help me please, i have 1 with the same problem, please help me to flash the device, thanks in advanced

orb3000 said:
Thanks a lot guys, with your guidance we were able to bring it alive!!!
Thanks a lot to all
-----------
Vote, check my sig!
Click to expand...
Click to collapse
Please post the solution.
May help others in the future.

this has happen twice to me, fixed both times
all you got to do is put it in bootloader Mode (hold down vol down and push power button) then go to att, or tmobile .com and download the original factory ROM, (with original .exe) load it and the phone works perfect, then you can load any custom rom you want after that
for some reason, over time, with all the flashing, files just don't transfer correctly, one file here, one file there, and it takes the original factory ROM built by IN-HOUSE team at Phone Carrier. and not the made in the basement
Roms we have on here, I have flashed all of them, and love Energy, but for
some reason, Agent47 Valkarie roms, usually after some use, make my phone
Brick and lock and all kind of stuff, but reload ATT factory exe rom and Re-Flash
with NRG and thats it,
let me know how it works out

[Q] Possibly bricked Rogers HTC Dream (G1) - tried several NBH's

I've searched Google quite a bit, and found others that had a similar issue, but I notice that they experienced slightly different outcomes (mostly not fixing the problem for them). I'm going into this assuming that the phone may just have to be jtag'd to be fixed... but as a last ditch effort I'd like to lay out my issue in as much detail as possible to see if anything can be done to salvage this thing.
How I broke it: I recall about a year ago, I tried flashing an SPL (was it DangerSPL? Maybe...). The phone was already rooted, but I think I was trying to gain S-OFF with it. Whatever it was, it was stupid to do.
How it behaved after that (and as of right now): Turning on the phone shows the Rogers logo, and it does nothing. For a very long time.
Power key combinations and their results: I notice that 3 work. Here they are:
1st) Hold wheelbutton+POWER - it illuminates the led (Blue colour).
2nd) Hold BACK+POWER: Takes me to a rainbow screen that has HBOOT text. The text is:
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Sep 2 2008
Also, inside the green part is a white line that says "Serial0"
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3rd) Hold CAMERA+POWER: Takes me to the same rainbow screen mentioned above, BUT - it turns into a grey screen that tries to load something. Research toldme that this is where it tries to load an NBH file (it's like a system image... like a rom I assume). I found 3 different NBH files.
First NBH file I tried was a "Rogers" one - which I thought would be perfect for me, since it's a Rogers phone. I made sure to rename it to DREAIMG.nbh, put it on a freshly-formatted MicroSD card, popped it in, and turned the phone on by holding CAMERA+POWER. It got to the grey screen, "loading..." and then "checking..." and then it said "00028002 not allow". It then returned me to the rainbow screen.
I then tried 2 other NBH's (the standard US one - RC29? and then the UK one - RC7?) with no luck - still got the "not allow" message.
So I think that's it. I'm glad that I can actually get SOME kind of screen up... as that is a sign of hope...
If anyone can contribute to this, it would be greatly appreciated. Thanks for reading.

a) you need to make a goldcard to flash any nbh other than the rogers ones.
b) 0.95.0000 will not net you flash the rogers firmware (I think an issue with the ebi1radio)
This means you must make a goldcard, borowing someone elses phone if needed to get the CID of a micro sdcard.
After you have a gold card I recommend you flash the orange nbh from my 2708+ thread http://forum.xda-developers.com/showthread.php?t=831139
(rename to DREAIMG.nbh and place on the root of the gold card)
Once the orange nbh is flashed you can flash and slash screen you want if any (only reason for a full s=off spl) then use the fastboot instructions to install the 2708+ radio and a rom. also on that thread)
_--

Ezterry to the rescue! Lots of info there. Thanks a lot - i will let u know of the results!
Sent from my XT860 using XDA App

ezterry thank you thank you thank you!!! Dream is up and running!!!!
Sent from my XT860 using XDA App

Flashing HardSPL and Rom X1 without

Whats up, I wanted to change the rom on my X1. But when I stood at 66% suddenly jumped error, rom removed, but the picture is not installed. For each attempt to install the longer 0% 262nd error occurs I changed cables, USB ports, theses, reset the computer and cell, and nothing helped ... So all in all, I do not even HardSPL upload, and yet, to upload the need to connect to ActiveSync, no not connect without the software ... The following screen shot bootloader with bad information with good information (ie, HardSPL and without HardSPL. Yes, I have 2 X1):
Without rom and HardSPL:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From rom and HardSPL (it normally is):
By the memory card probably did not go because there is no HardSPL. When I turn the screen bootload cell with memory card inserted upload rom on it, I get the gray screen that says "Loading..." and so all the time, without changing the ...
PS. I'm Polish and do not really embrace translate English and I used to translate the text, so please bear with us

Please, help!

In picture 1:spl is now updated.(0.72.0000 -> 0.78.0000)
you cant hardspl.....
---------- Post added at 03:29 PM ---------- Previous post was at 03:27 PM ----------
This maybe happen because you connect to Internet when you hardspl.....

Maybe your SD card needs formatting. Try to format it and then use it for flashing.
(USB method sometimes makes errors)

Yes i see this also no my X1, the details are;
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
This is the stock SPL, if i try to HardSPL using SD method i get this quick message " no image file" even though i ve formatted the SD to FAT32 and when i try the USB Cradle method i get ERROR (262). I have read so many post, i just do no what else to do.

Ferrurch said:
Yes i see this also no my X1, the details are;
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
This is the stock SPL, if i try to HardSPL using SD method i get this quick message " no image file" even though i ve formatted the SD to FAT32 and when i try the USB Cradle method i get ERROR (262). I have read so many post, i just do no what else to do.
Click to expand...
Click to collapse
you already have HardSPL: "SPL-0.78.0000"
for me it shows "SPL-0.78.OliNex"
but that makes no difference.
Now you can flash any ROM you want with SD-methode or via PC

Ferrurch said:
Yes i see this also no my X1, the details are;
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
This is the stock SPL, if i try to HardSPL using SD method i get this quick message " no image file" even though i ve formatted the SD to FAT32 and when i try the USB Cradle method i get ERROR (262). I have read so many post, i just do no what else to do.
Click to expand...
Click to collapse
did you rename image to Kovsimg.nbh? prerequisite for sdcard flashing...

Stachu_PL said:
Whats up, I wanted to change the rom on my X1. But when I stood at 66% suddenly jumped error, rom removed, but the picture is not installed. For each attempt to install the longer 0% 262nd error occurs I changed cables, USB ports, theses, reset the computer and cell, and nothing helped ... So all in all, I do not even HardSPL upload, and yet, to upload the need to connect to ActiveSync, no not connect without the software ... The following screen shot bootloader with bad information with good information (ie, HardSPL and without HardSPL. Yes, I have 2 X1):
By the memory card probably did not go because there is no HardSPL. When I turn the screen bootload cell with memory card inserted upload rom on it, I get the gray screen that says "Loading..." and so all the time, without changing the ...
PS. I'm Polish and do not really embrace translate English and I used to translate the text, so please bear with us
Click to expand...
Click to collapse
so what's the real issue: you want to flash a rom on a phone that is on stock spl, but it does not work out?
what rom? only stock will work
what is the problem when doing OliNex h-spl?
is your battery above 50% when you try to flash? that's also an issue
pls try to clarify, even if you are not native in English...