Database Develop

Bricked? Exclamation Point Between Phone + Computer

EDIT2: FIXED
Hey guys,
Did I brick my phone or is there a way to fix this? I'm stuck on a screen with a small exclamation point between a phone and a computer. (It's not the download screen).
Can't get into DL mode with the three button method it seems.
EDIT: This is the screen: http://img228.imageshack.us/img228/8420/hum1e0.jpg
EDIT2: FIXED
http://forum.xda-developers.com/showthread.php?t=731989 (Method 3)
I feel very intelligent right now. (Sarcasm++)
Any ideas?
Thanks,
Alec5216

.. YOU are my F'n hero!
Thought I lost my SGS for good !!!
Thanks for the feedback man!

Hey guys
Sorry a little off-the-model topic - Spica. But serious help needed here!
The computer had a blue screen mid-flash (god bless MS) and now the phone is nothing but a small orange icon which has a computer and a mobile connected by a yellow exclamation mark icon.
Is it like properly bricked?
What can I do?
I was reading this thread. Can I use the tools given here on a Spica? - Can I use this on the Spica? If at all, how? I can't even get into download mode!
HELP PLEASE! WAITING FOR SOME HELP!
Thank you

This is for AT&T Captivates only, sorry.

Oh OK. Thanks for the reply.

an33sh said:
Oh OK. Thanks for the reply.
Click to expand...
Click to collapse
i believe adb can be used on the galaxy spica. look in spica forums around the internet for instructions, i think it can be fixxed

Easy Solution
If ur mobile is still detected by odin then just flash a working kernel not the stock..u will be back to download mode in couple of seconds.Just flash using pda.Thanks

manish.triveni said:
If ur mobile is still detected by odin then just flash a working kernel not the stock..u will be back to download mode in couple of seconds.Just flash using pda.Thanks
Click to expand...
Click to collapse
You are about 3 years late with this answer.

But i didn't get the right answer at the first place

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.

You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium

hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries

You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2

First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.

There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.

Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk

Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.

vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.

mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...

chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.

firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??

Try a different USB cable?
Sent from my SPH-D710 using XDA

izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.

jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?

jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?

lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

[Q] Easy guide to JTAG without using expensive box

So yeah, I bricked my Samsung Galaxy Ace with the wrong kernel through Clock Work Recovery, chose reboot option, screen turned black.
I have tried all the button combos, with inserting battery method and all of that, I even bought a USB Jig but to no avail. The furthest I've come to entering Download Mode(button combinations, to then flash with Odin) is that the computer is detecting the samsung galaxy ace as a modem(If I do not press the button combinations the computer detects nothing at all) and I cannot establish connection with the phone with Odin nor adb shell.
I have searched these forums a few hours a week the last two weeks and the only possible option seems to be JTAG unbrick. I have no money to get me a 100$ jtag-box just to resurrect this phone, so my question is this:
Is there any other way that Is cheap and not too advanced for a tech newbie like myself to unbrick the phone? I have no problem with soldering, but my question is, is there any other module(or would a simple jtag cable work?) to access the phones internal workings?
Or maybe there is another way to save this phone? Please post if you have experiance!
No, I have no warranty left on the phone, and no I do not want to leave it to some jtag service. That is not the problem.
Help/tricks greatly appreciated!

I had the exact same delema I kept plugging the phone into the c in download.mode and in the end my computer rexonized it ans was able to flash back to stock phone resets every now and then but other than that works fine I now use in rooted fully stock on.not.running the risk
Sent from my GT-S5830 using xda app-developers app

chooky536 said:
I had the exact same delema I kept plugging the phone into the c in download.mode and in the end my computer rexonized it ans was able to flash back to stock phone resets every now and then but other than that works fine I now use in rooted fully stock on.not.running the risk
Click to expand...
Click to collapse
Was the screen black when you flashed It through Odin aswell? Cause all Im getting from Odin is "setting up connection..." and there it stops. Did I miss something?

Wrong kernel as in?
Another device? A jig "might" help you...
*emphasise the 'might'*

Prawesome said:
Wrong kernel as in?
Another device? A jig "might" help you...
*emphasise the 'might'*
Click to expand...
Click to collapse
Yeah, I got ahold of a Jig tried on my friends Samsung S2, and It did not work. I don't remember what I tried to flash it with, It was through clockworkmod and I was going to flash with rafaels kernel but must have got ahold of the wrong one in his SkyDrive map. Anyayws, I applied the .zip and chose reboot and all went permanently black.
Anyone have experiance in UART-Jigs and whatnot?

S I9000 won't power up

Hi all,
I have a serious situation with my S I9000, I really need some help.
So I had jelly bean Cyanogenmod 10, It worked fine until one day I updated it, and then I tried to Update some apps using Google Play App but the update didn't finish and cause me lots of unworkable apps.
I rebooted my phone to recovery mode, I made a backup, and then tried to restore an old backup (before I updated Cyanogenmod) but then the phone didn't want to start, It powers up but stays at "Samsung galaxy S....." welcome screen forever.
I was not able to start in recovery mode, how ever the downloading mode worked, then I tried to flash android 2.3.6 with odin but it failed.
And now my phone won't power up and doesn't show anything, even the charging screen.
I know I really messed things up but I really need your assistant guys.
Thank you (and sorry for my weak English)

What did you flash through Odin?
Sent from my GT-P7510 using Tapatalk HD

yosboss said:
Hi all,
I have a serious situation with my S I9000, I really need some help.
So I had jelly bean Cyanogenmod 10, It worked fine until one day I updated it, and then I tried to Update some apps using Google Play App but the update didn't finish and cause me lots of unworkable apps.
I rebooted my phone to recovery mode, I made a backup, and then tried to restore an old backup (before I updated Cyanogenmod) but then the phone didn't want to start, It powers up but stays at "Samsung galaxy S....." welcome screen forever.
I was not able to start in recovery mode, how ever the downloading mode worked, then I tried to flash android 2.3.6 with odin but it failed.
And now my phone won't power up and doesn't show anything, even the charging screen.
I know I really messed things up but I really need your assistant guys.
Thank you (and sorry for my weak English)
Click to expand...
Click to collapse
It's probably a hard-brick (I had the same problem last week). There are two ways that can solve it.
First is with a USB Jig. You can buy one (are super cheap) or trying to construct one by yourself. Here are some posts of handmade USB Jigs:
- http://forum.xda-developers.com/showthread.php?t=819551
- http://forum.xda-developers.com/showthread.php?t=1331782
The second way is by taking your phone to the shop.
Hope it helps you!

Soryuu said:
What did you flash through Odin?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Yes I used Odin!

TenKoX said:
It's probably a hard-brick (I had the same problem last week). There are two ways that can solve it.
First is with a USB Jig. You can buy one (are super cheap) or trying to construct one by yourself. Here are some posts of handmade USB Jigs:
- http://forum.xda-developers.com/showthread.php?t=819551
- http://forum.xda-developers.com/showthread.php?t=1331782
The second way is by taking your phone to the shop.
Hope it helps you!
Click to expand...
Click to collapse
Thank you, but I think that USB Jig doesn't work, cause the phone doesn't show anything at all : no downloading/recover mode and no battery charging screen.
I heard about JTAG.. do you have a tutorial for that ?
Thanks again.

JTAG i think is only used by professionals, so i don't think there is any guide about it

is it really i9000? or i9003?
as far as i know, flashing i9000 ROM into i9003 will hardbrick ur fone
Sent from my GT-I9000 using xda premium

yosboss said:
Thank you, but I think that USB Jig doesn't work, cause the phone doesn't show anything at all : no downloading/recover mode and no battery charging screen.
I heard about JTAG.. do you have a tutorial for that ?
Click to expand...
Click to collapse
Look in MY Android Solutions for phone completely dead and My Guides and Manuals for Riff BOX /JTAG ...Link Below

compacity said:
is it really i9000? or i9003?
as far as i know, flashing i9000 ROM into i9003 will hardbrick ur fone
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yes I'm sure it's i9000

Did you solve it, mate?
You can not restore any pre-CM backup as it has different format. I had the same situation last week and learned now how to revive my i9000
It is just a soft brick probably, if you have download mode (check 3-buttons) let me know if it works, I will help you later then.
Sent from my i9000 using CM10.1 by pawitp

yosboss said:
yes I'm sure it's i9000
Click to expand...
Click to collapse
well what did the boot splash say when it used to boot up

OK, now I'm back: so, does the Download Mode appear on your i9000 when you press volume DOWN+power+home buttons?
Sent from my i9000 using ROM 4.3 CyanogenMod 10.2 by pawitp v.Aug5,2013
---------- Post added at 09:21 PM ---------- Previous post was at 08:47 PM ----------
Maybe only @yosboss's battery was completely empty.....

tetakpatak said:
Did you solve it, mate?
You can not restore any pre-CM backup as it has different format. I had the same situation last week and learned now how to revive my i9000
It is just a soft brick probably, if you have download mode (check 3-buttons) let me know if it works, I will help you later then.
Sent from my i9000 using CM10.1 by pawitp
Click to expand...
Click to collapse
I solved the problem.
The phone was completely dead. downloading mode or recovery mode didn't work even the battery charge status wouldn't appear.
The solution was JTAG. it's complicated and used only by professionals as @TenKoX said.
TenKoX said:
JTAG i think is only used by professionals, so i don't think there is any guide about it
Click to expand...
Click to collapse

yosboss said:
I solved the problem.
The phone was completely dead. downloading mode or recovery mode didn't work even the battery charge status wouldn't appear.
The solution was JTAG. it's complicated and used only by professionals as @TenKoX said.
Click to expand...
Click to collapse
Great you have your phone back again! Thanks for the report

yosboss said:
I solved the problem.
The phone was completely dead. downloading mode or recovery mode didn't work even the battery charge status wouldn't appear.
The solution was JTAG. it's complicated and used only by professionals as @TenKoX said.
Click to expand...
Click to collapse
Glad to hear it!!
I had the same problem recently and JTAG solved the problem too

Need help with stucked S7

Hi
I recently tried to root my phone from this guide: devs-lab.com/root-samsung-galaxy-s7-s7-edge
I followed the instructions and flashed this file from ODIN:
Samsung_G930x_QC_Rooted_BOOT.TAR
The file transferred ok and when the phone started rebooting it just stopped with a fault message on the screen.
Now the phone is stucked and i can't get contact with Odin. Odin recognizes the phone on the port but i cant flash to the phone.
The only way i have a chance to install on the phone now is with SD-card, because i am able to get to the recovery mode.
But when i try to install new stockware i just get signature failed message.
Does anyone know how i can get out of this mess ? I know its possible to turn of the signature check, but i cant get any options like this in the menu ..... BTW the phone is a G930F
I would really appreciate all help !
Thanks
Tom

Tom-72 said:
Hi
I recently tried to root my phone from this guide: devs-lab.com/root-samsung-galaxy-s7-s7-edge
I followed the instructions and flashed this file from ODIN:
Samsung_G930x_QC_Rooted_BOOT.TAR
The file transferred ok and when the phone started rebooting it just stopped with a fault message on the screen.
Now the phone is stucked and i can't get contact with Odin. Odin recognizes the phone on the port but i cant flash to the phone.
The only way i have a chance to install on the phone now is with SD-card, because i am able to get to the recovery mode.
But when i try to install new stockware i just get signature failed message.
Does anyone know how i can get out of this mess ? I know its possible to turn of the signature check, but i cant get any options like this in the menu ..... BTW the phone is a G930F
I would really appreciate all help !
Thanks
Tom
Click to expand...
Click to collapse
Which fault message are you receiving?
Sent from my SM-G930P using Tapatalk

POWerSUrgeSW3 said:
Which fault message are you receiving?
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
Hi,
I dont remember exactly the fault message because my phone has been sent to service. But i will get it back in a couple of days. Then i will tell you the entire message. But is was something about kernel fault....
The service center says i have to replace the main board on the phone which cost almost the same as a new phone....
But i'm sure the main board is not broken...
Tom

Tom-72 said:
Hi,
I dont remember exactly the fault message because my phone has been sent to service. But i will get it back in a couple of days. Then i will tell you the entire message. But is was something about kernel fault....
The service center says i have to replace the main board on the phone which cost almost the same as a new phone....
But i'm sure the main board is not broken...
Tom
Click to expand...
Click to collapse
Blah that's never good. Though I don't always trust things HAVE to be replaced at the hardware level. But it is what it is. Hopefully when you get it back all will be working for you! Unless it was just a bad chip, failing at the same time you were trying to write the new files to memory?
Sent from my SM-G930P using Tapatalk

POWerSUrgeSW3 said:
Blah that's never good. Though I don't always trust things HAVE to be replaced at the hardware level. But it is what it is. Hopefully when you get it back all will be working for you! Unless it was just a bad chip, failing at the same time you were trying to write the new files to memory?
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
Well....
Actually i'm hoping to fix the phone withouth replacing the main board since it is so expencive.
So i asked them to return it withouth replacing. Because as long as i can get the phone in recovery mode its not broken. I just need to get pass Samsungs signature verification somehow... Then i can install new firmware...
Still hoping to get help. I will post the error message as soon as i get the phone back,
Thanks so far
Tom

Tom-72 said:
Well....
Actually i'm hoping to fix the phone withouth replacing the main board since it is so expencive.
So i asked them to return it withouth replacing. Because as long as i can get the phone in recovery mode its not broken. I just need to get pass Samsungs signature verification somehow... Then i can install new firmware...
Still hoping to get help. I will post the error message as soon as i get the phone back,
Thanks so far
Tom
Click to expand...
Click to collapse
I think I did the same thing when I first got the Phoenix, and did not research and do not turn the OEM Unlock feature on. I messed up things and through a lot of reflashing and panic searching, got mine to come back.
I since have seen others post issues that sound horrible but have been recoverable. We'll help you try to figure it out once you get the phone back.
Sent from my SM-G930P using Tapatalk

POWerSUrgeSW3 said:
I think I did the same thing when I first got the Phoenix, and did not research and do not turn the OEM Unlock feature on. I messed up things and through a lot of reflashing and panic searching, got mine to come back.
I since have seen others post issues that sound horrible but have been recoverable. We'll help you try to figure it out once you get the phone back.
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
Hi, i finally got my phone back.
Been trying different things like installing new firmware by using the SD-card. And also by using ADB, since the phone allows me to install software through ADB.
But no matter what i do the phone tells that signature verification failed.
I think one fault i did when installing the twrp custom recovery from ODIN i forgot to press the key combo and it started up with the original bootloader. Then it got stuck with the error screen i told you about.
I have uploaded a picture of the error message below.
If anyone knows how to get by the signature verification test then maby i could be able to install new firmware....
Thanks again, i will be grateful for any tips that could help me !
Best Regards
Tom

Tom-72 said:
Hi, i finally got my phone back.
Been trying different things like installing new firmware by using the SD-card. And also by using ADB, since the phone allows me to install software through ADB.
But no matter what i do the phone tells that signature verification failed.
I think one fault i did when installing the twrp custom recovery from ODIN i forgot to press the key combo and it started up with the original bootloader. Then it got stuck with the error screen i told you about.
I have uploaded a picture of the error message below.
If anyone knows how to get by the signature verification test then maby i could be able to install new firmware....
Thanks again, i will be grateful for any tips that could help me !
Best Regards
Tom
Click to expand...
Click to collapse
Good NEWS !!!!!
I managed to get the phone working again...
What i did was:
Holding the volume down, home and power button at the same time. When the phone went black i plugged in the USB cabel from the computer.
The error message came up 2 - 3 times but i kept holding the buttons.
Eventually it went into download mode and i used ODIN to flash the firmware...
I hope this could solve the problem also for others facing similar issues.
Thanks to BWolf56 who posted in a forum here. His tips fom 2011 .... helped me.
Regards
Tom

Tom-72 said:
Good NEWS !!!!!
I managed to get the phone working again...
What i did was:
Holding the volume down, home and power button at the same time. When the phone went black i plugged in the USB cabel from the computer.
The error message came up 2 - 3 times but i kept holding the buttons.
Eventually it went into download mode and i used ODIN to flash the firmware...
I hope this could solve the problem also for others facing similar issues.
Thanks to BWolf56 who posted in a forum here. His tips fom 2011 .... helped me.
Regards
Tom
Click to expand...
Click to collapse
Great to hear... Good luck from here on out!
This is a good sign not to listen to tech support. They don't know, or mess with this stuff, as much as us!
Happy flashing and hope no more scares from here on out...
Sent from my SM-G930P using Tapatalk