Hi,
Last night I knocked a small table and my girlfriends phone and a remote for the TV fell off.
We noticed that her phone now has a ring of black dots on the screen, mostly visible with a white background (E.G websites) but also from the home screen and the like.
We think she's cancelled her phone insurance, as she's never had a payment out to the company.
Can anyone tell me if its a Digitizer (What is one of these? Is it just the touch screen sensitive part of the phone?) Or the actual LCD Screen itself?
If you click on the photo it will load a larger image
Thanks for any assistance, kinda annoyed about this and wondering if I can repair myself with the parts on ebay. Or does anyone know how much HTC Charge to repair similar? Either in $USD, £GBP or €Eur, I can convert and get a ball park figure.
Hi
First of all is the phone still in warranty? If so take it back to an HTC dealer they should repair it for you for free. TD2 screens are not very good and it's a common fault. ( i had to have mine repaired after just only 3 weeks! )
The TD2 screen is made out of 2 parts, The touch screen or the 'digitizer' as you call it and a normal LCD screen underneath. You need to establish which has gone faulty.
If the touch screen still operates normally i.e the screen does not lock up or freeze and allows you to navigate normally then its the lcd screen below. If the touch screen is faulty one good way of checking is to put a piece of tape over the damaged area and try to lift it up a little to see if the marks / dots disappear and functionality can temporarily be restored.
Its hard to tell from your picture which it is..... sorry
I'm not sure how much a replacement by a dealer would cost, but i'm sure you can replace either yourself. ebay is a good place to look
Hope this helps.
I've had a reply from HTC UK who said the following:
That looks like there are a bunch of very small cracks in the screen. the black stuff is likely the Liquid Crystal from inside the display that has leaked out. If the dots get larger then it would definitely seem that the screen has got some cracks in it.
if this is the case, the standard charge for replacing the LCD is around £180 as sadly it is all one complete unit on the diamond 2, so it is not just the LCD underneath that needs to be replaced, but the whole screen assembly including the touchscreen layer and the actual LCD.
I hope this information helps you to make up your mind.
best regards,
Pete W
HTC
Click to expand...
Click to collapse
Reply was fast, I think <1hr from my first email!
I'll see if I can find any HTC Dealer who will send it off on my behalf, but may just end up buying this: http://cgi.ebay.co.uk/LCD-Screen-Di...UK_Mobiles_Accessories_RL?hash=item588362a12d
Hi mate,
had the same problem...
the item you psetd from ebay is not the one you need to change.
you need a digitizer, not an lcd screen.
i got one from ebay (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItemVersion&item=290376721935&view=all&tid=393718237019), it includes both the lcd and the digitizer, you can check ebay to find other auctions offering the digitizer only.
you can change the digitizer on your own if you don't mind loosing the waranty of your phone.
cheers
Hi,
I had already found this: http://cgi.ebay.co.uk/Touch-Screen-...UK_Mobiles_Accessories_RL?hash=item5882e7ef74
Will buy in a bit, funds are a bit short today.
The Touch Screen's functionality hasn't changed at all though, no sticking buttons or anything. So I suspect that its the LCD Screen thats damaged but will follow you're advise as you're going to have more experiance than me (and its the cheaper part to begin with!)
Scrap the above post.. my g/f has just told me that the dots on her phone are bigger/worse. Looks like its the LCD Screen afterall
i still believe it is not the LCD.
the digitizer is actually sitted on a glass, and the LCD is below that. it is very difficult to harm the LCD. i also though it was the LCD (at least i wasn't sure which was broken) so i ordered both of them.
if you disasseble the phone you will be sure if it is the LCD or not.
i vote for the digitizer
good luck, if you need any help, i'll be pleased to help you..
Just to update, A few days after I posted and got helpful advice on here.. she called me up to say the dots have disappeared, and they have still gone now a few days after.
She said she put it in the office where she works, under a printer paper tray, and the office was warm. Something has (maybe only temporarily) fixed it.
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Well F**K me! just bought a second hand diamond 2 to replace my xperia...
...seemed to work great checking it out... went home with the phone in my pocket... and as soon as I turn it on the touch screen doesn't work
dissected the whole phone only to discover the digitizer is glued to the bezel!
I ordered this from Ebay, will update if I got it working with the brand new housing + digitizer: http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=380166349182&ssPageName=STRK:MEWNX:IT
fingeres crossed
Please report back here on this thread if it works
fluke said:
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Click to expand...
Click to collapse
Can any one help with this matter?
fluke said:
Can any one help with this matter?
Click to expand...
Click to collapse
If you can make some photos of the digitizer and the lcd dissasembled maybe, but It seems unlikely to break the lcd when you didn't completely trashed your digitizer.
jodeltje said:
If you can make some photos of the digitizer and the lcd dissasembled maybe, but It seems unlikely to break the lcd when you didn't completely trashed your digitizer.
Click to expand...
Click to collapse
Thanks for the reply as I said previously:
I´m having the same exact problem my nephew dropped my phone, i already dissemble it because i was not sure of the lcd type, but when i looked at the digitizer i didn´t see any dots, so i´m not sure what to repair, TS or Digitizer, i allready tried with the tape to pull the digitizer, when it was apart i couldn´t see anything on the lcd no marks at all, opinions please.
cheers
Click to expand...
Click to collapse
Also the LCD didn´t had any marks at all, but i´m going to buy the TS+LCD and replaced by parts first the lcd because it´s a lot easier to replace then if the problem persists the TS.
I will post the result later when i get the parts to replace.
Superman_1122 said:
I've had a reply from HTC UK who said the following:
Reply was fast, I think <1hr from my first email!
I'll see if I can find any HTC Dealer who will send it off on my behalf, but may just end up buying this: http://cgi.ebay.co.uk/LCD-Screen-Di...UK_Mobiles_Accessories_RL?hash=item588362a12d
Click to expand...
Click to collapse
Can anyone confirm the above link as being both Lcd and Digitizer? I'm sure it doesn't mention it in the listing but the picture looks like it's showing both connectors.
Most likely only the LCD that's my conclusion if you look at the sellers store.
But to be sure e-mail the seller and ask.
http://stores.shop.ebay.co.uk/Elect...QQ_sidZ195653022?_nkw=diamond+2&submit=Search
Soooooo, as I've already posted here, My digitizer was busted on the phone I just bought... what I didn't tell was that I ordered a digitizer, then checked if I could remove it easily...came to the conclusion that I couldn't... and ordered a digitizer+housing so I could easily fit it on.
the mail brought me the digitizer today, and while knowing a better solution was on it's way I couldn't resist and try if I could make it work.
Turns out it super easy to seperate the digitizer from the bezel using a hairdryer (softening the glue) and a knife:
Take your phone apart, just the 4 screws, click the plastic center off it. Remove the digitizer cable, the touchscreen cable and the speaker cable.
now you are able to remove the green plate which holds all chips and stuff.
underneath that is the screen, lift it up gently going under it from the gap the removal of volume buttons leaves, put it away safely.
Now remove the speaker, the buttons under the zoom bar, and the power button(don't forget the the power button, and rubbery thingy that falls out of the bottom, the hole needs to be at the bottom when putting it back in).
your phone should be completely empty by now... just the front and the digitize glued together.
make the front of the phone reaaaaaaaaaallllly hot, put the knive between the metal and the digitizer (I started at the part where the zoombar is) and gently push it between the two parts... (from the inside of the phone to the oudside). Now just keep the whole thing above the dryer to keep it warm and slowly slice your way around the phone (no secret wires are there that you can cut through).
I used some random glue I had lying around to glue the front back to the new digitizer... perfect!
so the screen is like new now
ps bought this digitizer: http://cgi.ebay.nl/Touch-Screen-Dig...wItemQQptZPDA_Accessories?hash=item45eed6effc
Thanks for that jodeltje.
It sounds exactly the same as when i replaced the digitizer on an Omnia. Really not as hard as one might imagine. Taking your time and being careful are the most important things.
Hey guys,
I came into same boat last night.
Dropped my T-Mobile MDA Compact V from 2.5ft table, Backwards (Not towards LCD) and now it has black dots on screen. I guess the LCD has pressed backwards by chip sets.
Here is a screenshot.
I think its LCD damaged but I don't have cash to replace nor device warranty.
Do you think the problem solves eventually? Coz once I had dropped sony mobile and it too had same issue but solved after many days.
Hopefully it solves.
BTW; does LCD affixed to Digitizer? by seeing service manual, it doesn't look like it is. And I afraid to get cheap hongkong LCD screens for about 30$ since they won't be true quality display. i.e blueish.
Thanks...
Best Regards
hello CRACING,
sorry about what happened to you...
from the picture i can say that you have a problem with the digitizer...
your LCD is ok.
i tend to have this problem over and over again the last 1,5 years... i replace the digitizer (or the glass on which the digitizer is attached to) every 3-4 months..
yes the ones you get from ebay are not that good quiality, but well it keeps the phone working...
if you need assistance on replacing the digitizer, i can help you, by providing pictures and istructions...
cheers
I drop my SP and front glass cracked, it really looks ugly. But display and touch are functioning normally. So, my problem is how to replace it. I saw screen digitizers on ebay can be bought for 25-50 USD, but I read somewhere that it's not possible to replace only digitizer but you need to replace the screen as well. Another problem is, I saw a video on yt where a man bought faulty digitizer for sp on ebay.... So, I don't know what to do?
abdic88 said:
I drop my SP and front glass cracked, it really looks ugly. But display and touch are functioning normally. So, my problem is how to replace it. I saw screen digitizers on ebay can be bought for 25-50 USD, but I read somewhere that it's not possible to replace only digitizer but you need to replace the screen as well. Another problem is, I saw a video on yt where a man bought faulty digitizer for sp on ebay.... So, I don't know what to do?
Click to expand...
Click to collapse
send it for repairs to sony centre
Not many options really.
1) Send your phone to somewhere where they can repair it for a cost.
Or
2) Buy one off ebay and give it a go yourself! If its faulty send it back.
I replaced screen on xperia arc. If you take your time and be patient its not hard. Not sure what answers you're looking for ha
As far as I was aware, for the arc, you had to replace screen and digitizer as one assembly.
The digitizer is kind of stuck to the screen, i.e. you cant do it yourself...easily.
Hello,
is it possible to replace the digitzer of the Xperia Z by myself?
My display is fully working just the digitizer cracked. And my phone isn't usable anymore.
I found the Digitizer front cover glass for 35€.
If so does anybody have a good tutoriol to do so?
I have nothing to loose, sony care take 200€ for the replacement, for this money i can buy a new Phone.
I found a lot of videos on youtube where they replace the digitzer inkl. LCD display. But not where they only replace the digitizer front panel.
I saw that the digitzer is glued to the LCD display.
Anybody replace the Digitizer by himself and could provide me with a few tipps?
I saw it's possible to detach the Digitizer with a heat gun.
I have a little practice by reparing the display of my old Iphone 4.
Which parts do i need?
Front Cover Adhesive
Back Cover Adhesive
and Front cover glass inkl digitizer?
Thx for your Help.
Sorry for my english.
deleted
Same. Problem here... Been using my z thru otg :'(
Sent from my C6603 using Tapatalk
You can broke your lcd too, while un-soldering digitizer from lcd.
Happend to me once.
I've replaced complete LCD+digitizer in once. Do not forget to order new adhesives. Back adhesive will get big damage on dissembling process. Back cover might not stick very well with old ones.
LCD panels might include front adhesives on it.
You can buy the digitizer here:
http://rounded.com/xperia-z-l36h/
Tho I'm not 100% sure if they ship everywhere. It's pricey tho!
You can't unglue the digitizer from LCD without breaking them.
Try this
CaracalSef said:
You can't unglue the digitizer from LCD without breaking them.
Click to expand...
Click to collapse
Try It's Lowest Cost in India
http://www.ebay.in/itm/LCD-Display-...?pt=IN_Mobile_Accessories&hash=item20d6265d09
i just found this, i will go talk to man in repair shop, if he doesnt want to do it i will probably try it myself. it is extremely hard process and i dont know how do i remove glue residue from lcd, alcohol maybe? and i would ofc order new adhesives, it 5 usd for front and back.
http://m.youtube.com/watch?v=1TFFHFHUJjc
what do you guys think?
Hello everyone!
I bought a Xperia Z1 two weeks ago, and it was the best phone I have ever had.
However my idiot brother Managed to crack the Digitizer a few days back, the display is still working and the phone powers up but the touch panel is unresponsive.
(He was playing with one of those Heavy Snake Egg magnets, he threw the magnet into the air, and landed right on my phone. I'm surprised the Display is still working. )
Anyways, I was wondering if anyone here has replaced only the Touch Panel. I know on the Xperia Z1 its fused with the LCD, however with a machine like the Scotle PR-1000 its possible to separate the LCD from the touch panel.
Here is the link to a video showing the process: https://www.youtube.com/watch?v=h8bZi3FreMk
Now I have a few questions such as:
-With this method, wont the LCD display be scratched up as well?
-When I replace the touch screen with a new touch panel using this method, will it look normal? Or will it look like it has been opened and repaired?
-With a new digitizer, is the phone still waterproof capable? (I dont really care about the waterproof capabilities that much anyways.)
Thanks!
Can anyone help me?
You could just replace the entire display module, digitizer, LCD, and all. This would be the cleaner and easier way of replacing it with fewer potential problems. As far as waterproofing goes, I am not sure. Those are sort of uncharted waters (no pun intended) as far as repairs go. If I were you, I would assume not just to be on the safe side, until further knowledge presented itself. I hope this info helps!
FOr the past few days thats what I was thinking.
Especially since where I live most Cellphone "technicians" are just people with a very limited knowledge of electronics, and would most probably mess up the phone even further.
after placing a few calls to some shops I managed to find a replacement LCD+Digitizer+Frame, but I do not know how good the quality of the replacement unit would be.
Dear WEM97 and other users,
I have the same problem as Akash434. Could you please briefly elaborate on what the (potential) problem could be with just replacing the Digitizer. I can't really decide what to replace the LCD+Digitizer or only Digitizer. I understand replacing the whole LCD unit along is a far, far easier process. But cost wise it's also almost the double (atleast where i live).
Upon removing the Digitizer, should the old glue be removed (if any). What kind of glue should I use to stick the new Digitizer? Will u see that there was glue used? These are just a few questions I am struggling with.
Your help is greatly appreciated.
PS: I apologize for any grammar mistakes. English is not my native language.
you can't do this without a professional machine
https://www.youtube.com/watch?v=yMj-aWbttJk
This is my video and the description will send you to the links to fix it yourself
Otherwise get a shop to fix it... although most regular shops won't fix it... or get sony to fix it if you wanna continue your warranty
Place the phone on a heatable-3dprinter-bed and warme it up the temperature you want - digitizer was falling of the display last time i repaired my z1. I heated it up to disassemble. Now it is cracked again and i just don´t know how to glue the digitizer on... If i would change digitizer
I have a Z3+ where the digitizer cracked by itself while laying on the table beside me. I cant use the phone anymore. Screen is still perfectly fine but touch is not working.
I contacted Sony and it turns out to be to expensive to fix at a repair shop. Is it possible to change this myself? A Digitizer is only ~10$ on Ebay but I cant find much information on how to change it.
The only video I found is this, but its not very clear:
Xperia Z3 Digitizer Glass Only Replacement
https://www.youtube.com/watch?v=levTY6Ixxl8
Does anyone have any experience on doing this and could give me some informaiton?
Nilsi
It's Xperia Z thread, but my advice is to buy digitalizer and touch together and replace them. I tried to change just touch on my XZ and i broke digitalizer, as I read through the net and find that Sony made it nearly impossible to remove touch from digitalizer. If you don't have equipment and skills it's best to replace them together.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Thank you! I think buying the full screen + touch is a bit to pricey for me. its around 100-120$, not worth it for me since I can fail to mount it and loose more money. I just wanna give changing digitizer a shot before I throw the phone in the garbage can.
I am thinking of taking it apart and see if I can separate the digitizer first, if I succeed I will order a new one and put on top.