Replace only digitalizer on Z3+/Z4 - Xperia Z Q&A, Help & Troubleshooting

I have a Z3+ where the digitizer cracked by itself while laying on the table beside me. I cant use the phone anymore. Screen is still perfectly fine but touch is not working.
I contacted Sony and it turns out to be to expensive to fix at a repair shop. Is it possible to change this myself? A Digitizer is only ~10$ on Ebay but I cant find much information on how to change it.
The only video I found is this, but its not very clear:
Xperia Z3 Digitizer Glass Only Replacement
https://www.youtube.com/watch?v=levTY6Ixxl8
Does anyone have any experience on doing this and could give me some informaiton?
Nilsi

It's Xperia Z thread, but my advice is to buy digitalizer and touch together and replace them. I tried to change just touch on my XZ and i broke digitalizer, as I read through the net and find that Sony made it nearly impossible to remove touch from digitalizer. If you don't have equipment and skills it's best to replace them together.
Good Luck!
Sent from my XPERIA M2 using Tapatalk

Thank you! I think buying the full screen + touch is a bit to pricey for me. its around 100-120$, not worth it for me since I can fail to mount it and loose more money. I just wanna give changing digitizer a shot before I throw the phone in the garbage can.
I am thinking of taking it apart and see if I can separate the digitizer first, if I succeed I will order a new one and put on top.

Related

[Q] Broken touch digitezer Xperia Z

Hello everyone,
My XZ screen broken and half of screen doesnt regocnize any touches...
Is possible to change touch digitizer? In home? Or better to bring it to the service?
keturkaimis said:
Hello everyone,
My XZ screen broken and half of screen doesnt regocnize any touches...
Is possible to change touch digitizer? In home? Or better to bring it to the service?
Click to expand...
Click to collapse
Probably is posible to change the screen by yourself, if you are skilled enough. Bringing it to service, last time I checked, they charged you half the price of a new unit for the new screen.
DrKrFfXx said:
Probably is posible to change the screen by yourself, if you are skilled enough. Bringing it to service, last time I checked, they charged you half the price of a new unit for the new screen.
Click to expand...
Click to collapse
oh dear thats going to cost you. i broke mine xperia z screen all i did was take it out of my pocket and it was broke. i sourced the part off amazon for 95 quid. all because sony are robbing and put the outerglass with the lcd all in one unit to make it more expensive. anyway i did it myself as the repar centre was asking 250 quid. its not waterproof now though as i couldnt find the gasket for the lcd so i used normal 2 mm strips.
Thanks guys.. Okay.. I will try to change by myself.. maybe do you know where i can get cheaper that glass lens?
I found this cheapest variant in ebay. http://www.ebay.com/itm/For-Sony-Xp...er_Cell_Phone_Accessories&hash=item2a306f4842
P.S. How I understant the Display and digitzer is all in one?
up..

[Q] Screen digitizer; Broken glass

I drop my SP and front glass cracked, it really looks ugly. But display and touch are functioning normally. So, my problem is how to replace it. I saw screen digitizers on ebay can be bought for 25-50 USD, but I read somewhere that it's not possible to replace only digitizer but you need to replace the screen as well. Another problem is, I saw a video on yt where a man bought faulty digitizer for sp on ebay.... So, I don't know what to do?
abdic88 said:
I drop my SP and front glass cracked, it really looks ugly. But display and touch are functioning normally. So, my problem is how to replace it. I saw screen digitizers on ebay can be bought for 25-50 USD, but I read somewhere that it's not possible to replace only digitizer but you need to replace the screen as well. Another problem is, I saw a video on yt where a man bought faulty digitizer for sp on ebay.... So, I don't know what to do?
Click to expand...
Click to collapse
send it for repairs to sony centre
Not many options really.
1) Send your phone to somewhere where they can repair it for a cost.
Or
2) Buy one off ebay and give it a go yourself! If its faulty send it back.
I replaced screen on xperia arc. If you take your time and be patient its not hard. Not sure what answers you're looking for ha
As far as I was aware, for the arc, you had to replace screen and digitizer as one assembly.
The digitizer is kind of stuck to the screen, i.e. you cant do it yourself...easily.

[Q] Digitizer

Hello everyone, got a sony z1 from a mate for free but there's a liltle crack on the digitizer, has anyone bought one from ebay so far ? post your review and if you have any links it is appreciated Have a nice day
There is a plenty of Digitizers on eBay and most of them are not Genuine, I also don't think so many people replaced they screens to let you know which you have to buy. Just check and ask the seller if you see a good deal.
BTW, do you know that you have to have a good skills to replace it?
I bought mine from www.witrigs.Com Find a couple different YouTube guides and take your time. It really isn't that hard of a repair but you will need the heat gun. Make sure you also order all the seals for putting the device back together.
Sent from my Sony Xperia™ Z1
DIY repair
Do you want to DIY repair?
It is very hard to only replace the digitizer part, even for the guy who has professional skill.
The digitizer and screen are glued together tighlty. So I think you have to replace the screen with digitizer part.
BTW, witrigs.com is a good website. You can find original part and repair guide. Good Luck.

[Q] Replacing a Xperia Z1 Cracked Digitizer

Hello everyone!
I bought a Xperia Z1 two weeks ago, and it was the best phone I have ever had.
However my idiot brother Managed to crack the Digitizer a few days back, the display is still working and the phone powers up but the touch panel is unresponsive.
(He was playing with one of those Heavy Snake Egg magnets, he threw the magnet into the air, and landed right on my phone. I'm surprised the Display is still working. )
Anyways, I was wondering if anyone here has replaced only the Touch Panel. I know on the Xperia Z1 its fused with the LCD, however with a machine like the Scotle PR-1000 its possible to separate the LCD from the touch panel.
Here is the link to a video showing the process: https://www.youtube.com/watch?v=h8bZi3FreMk
Now I have a few questions such as:
-With this method, wont the LCD display be scratched up as well?
-When I replace the touch screen with a new touch panel using this method, will it look normal? Or will it look like it has been opened and repaired?
-With a new digitizer, is the phone still waterproof capable? (I dont really care about the waterproof capabilities that much anyways.)
Thanks!
Can anyone help me?
You could just replace the entire display module, digitizer, LCD, and all. This would be the cleaner and easier way of replacing it with fewer potential problems. As far as waterproofing goes, I am not sure. Those are sort of uncharted waters (no pun intended) as far as repairs go. If I were you, I would assume not just to be on the safe side, until further knowledge presented itself. I hope this info helps!
FOr the past few days thats what I was thinking.
Especially since where I live most Cellphone "technicians" are just people with a very limited knowledge of electronics, and would most probably mess up the phone even further.
after placing a few calls to some shops I managed to find a replacement LCD+Digitizer+Frame, but I do not know how good the quality of the replacement unit would be.
Dear WEM97 and other users,
I have the same problem as Akash434. Could you please briefly elaborate on what the (potential) problem could be with just replacing the Digitizer. I can't really decide what to replace the LCD+Digitizer or only Digitizer. I understand replacing the whole LCD unit along is a far, far easier process. But cost wise it's also almost the double (atleast where i live).
Upon removing the Digitizer, should the old glue be removed (if any). What kind of glue should I use to stick the new Digitizer? Will u see that there was glue used? These are just a few questions I am struggling with.
Your help is greatly appreciated.
PS: I apologize for any grammar mistakes. English is not my native language.
you can't do this without a professional machine
https://www.youtube.com/watch?v=yMj-aWbttJk
This is my video and the description will send you to the links to fix it yourself
Otherwise get a shop to fix it... although most regular shops won't fix it... or get sony to fix it if you wanna continue your warranty
Place the phone on a heatable-3dprinter-bed and warme it up the temperature you want - digitizer was falling of the display last time i repaired my z1. I heated it up to disassemble. Now it is cracked again and i just don´t know how to glue the digitizer on... If i would change digitizer

Broken screen

Hello,
The screen of my Xperia z3c broke today. Is there a way to repair it? Should i buy a new smartphone? Is it possible to fix it by myself?
Thank you in advance
Yeah there is a way,it isn't hard but again it ain't easy
You can have look at some z3c screen replacement videos at YouTube and decide if you're up for it yourself. You could also pay someone else to do it or buy a new phone. If you decide to give it a go yourself I'd recommend getting an original, or good copy, screen replacement. For a z3c I would not get any of the screens with a pink piece of protection plastic on the back of it.

Categories

Resources