My Galaxy S can't read any device.
When I connect my USB OTG cable everything seems to be fine, the cable is recognized, it says "OTG USB cable connected", "Root hub present, USB Host mode is active!" and so on...
But when I go to the USB tab no device is shown.
Anyone had this problem?
Android 4.0.3
Kernel Version: 3.0.8-g4cf4918 [email protected] #129
Can anyone help me? I really need this for a school project and I'm running out of time...
If anyone have this working in their Galaxy S, please show me the links to download the ROM and other things that I might need.
Thanks in advance
delete
I currently have a bricked SAMSUNG GALAXY ACE S5830 phone.
When I put it into download mode and try to flash the it using ODIN, ODIN recognizes that the device S5830 is connected at COM8 while the device manager specifies that it is connected at COM9. Here is a screen shot.
Since, I do not have 10 posts, XDA is not allowing me to post links.. So Am not able to 'embed an image'/'post a link'. but here is the link
ht tp://s8. postimage .org/j97vdv1ur/com_port_odin.jpg
And ODIN gets stuck at the first step :
<1> setup connection...
__________
I am guessing it is because of the miss-identified com port.
1] Am I right?
2] How do I resolve this? (so the flashing continues as expected)
hi everybody
I have a big problem
i have buy an i9305 from ebay with imei null/null.
i have try this:
Recovering IMEI And Data Connection After Flashing WRONG Root Package Intended For I9300: failed
Repair your IMEI with QPST: failed (phone not detected)
please, someone can help me?
ecoll said:
hi everybody
I have a big problem
i have buy an i9305 from ebay with imei null/null.
i have try this:
Recovering IMEI And Data Connection After Flashing WRONG Root Package Intended For I9300: failed
Repair your IMEI with QPST: failed (phone not detected)
please, someone can help me?
Click to expand...
Click to collapse
Well, try to flash a 9305 ROM and not a 9300...
Recovering IMEI And Data Connection After Flashing WRONG Root Package
•Make sure you have Samsung Kies or the Samsung USB Driver installed on your PC.
•Download and Extract: Odin3 3.04.zip - 457.11 KB to your PC if you don't already have it.
•Download and Extract: Param_Bin_I9305.zip - 612.14 KB to your PC.
•With your Phone Switched Off, press and hold: 'VOL DN' + 'HOME' + 'POWER' to enter Download Mode.
•Connect your phone to your PC via USB Cable and start Odin.
•Check your phone is connected by seeing if a COM Port in a Blue box is present under ID:COM.
•Press the 'PDA' Button and select the 'Param_Bin_I9305.tar.md5' file you extracted from the Zip Archive earlier.
•Press the 'Start' Button and wait for it to finish flashing. If successful, you will see a Green Box with 'PASS!'.
•Wait for your phone to reboot then go to your Dialer and press: *#06#. You should now see your IMEI and your Data Connection will be back.
Or send me your phone i will repair it
Send to service center.
Raistlin1158 said:
Recovering IMEI And Data Connection After Flashing WRONG Root Package
•Make sure you have Samsung Kies or the Samsung USB Driver installed on your PC.
•Download and Extract: Odin3 3.04.zip - 457.11 KB to your PC if you don't already have it.
•Download and Extract: Param_Bin_I9305.zip - 612.14 KB to your PC.
•With your Phone Switched Off, press and hold: 'VOL DN' + 'HOME' + 'POWER' to enter Download Mode.
•Connect your phone to your PC via USB Cable and start Odin.
•Check your phone is connected by seeing if a COM Port in a Blue box is present under ID:COM.
•Press the 'PDA' Button and select the 'Param_Bin_I9305.tar.md5' file you extracted from the Zip Archive earlier.
•Press the 'Start' Button and wait for it to finish flashing. If successful, you will see a Green Box with 'PASS!'.
•Wait for your phone to reboot then go to your Dialer and press: *#06#. You should now see your IMEI and your Data Connection will be back.
Click to expand...
Click to collapse
I already tried this method
ecoll said:
I already tried this method
Click to expand...
Click to collapse
then there's nothing you can do but change the motherboard
Hi ecoll hope u will find a solution...If u want some help u know where u can find me!!
Are you certain that the USB drivers are installed correctly? Because this is the most common reason for not detecting the phone in either Odin or QPST. But if it really can't be detected by either of them, and it definitely isn't an issue with the software on your PC, then short of a JTAG box or a replacement motherboard, there's nothing you can do.
invalid imei after custom rom for i9300
scumpicule said:
Or send me your phone i will repair it
Click to expand...
Click to collapse
Please help me, i flashed my i9300 recently with the s4 revolution custom ROM but after the flash, the imei changed to 00490.. and the network signal is gone. What do you think i should do? I live in Nigeria.
seegates007 said:
Please help me, i flashed my i9300 recently with the s4 revolution custom ROM but after the flash, the imei changed to 00490.. and the network signal is gone. What do you think i should do? I live in Nigeria.
Click to expand...
Click to collapse
This is the wrong forum unless you have I9300 .
Please read the faqs and guides first .
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
hi,i need help i want to restore imei of s3 mini but method which i am using needs to enable Diag mode when i dial *#7284# there is no such options or any qualcomm usb settings.help
qasim799 said:
hi,i need help i want to restore imei of s3 mini but method which i am using needs to enable Diag mode when i dial *#7284# there is no such options or any qualcomm usb settings.help
Click to expand...
Click to collapse
S III mini has NovaThor CPU, not qualcomm, so there wont be any qualcomm settings
hi
i have problem with my Gt-i9505
the phone is showing imei null wich means no network , i found the solution for that but the bigger problem is that usb not recognized
when i plug it to pc nothing happen only the phone is charging , i tried every thing
when go to service mode it's shwong showing blanc menu
i tried *#7284#
but the USB mode doesnt apear only UART which is stuck on PDA and i cant change it to MODEM , i tried to root phone with a lot of apps
to use mbile odin but no one worked for , i really need help to fix it
Phone must be unlocked from from pattern or pin lock screen to communicate with PC.
Check out this for additional advice:
http://forum.xda-developers.com/showthread.php?p=56955843
ThumbsUp button under every post is free to use in case you're in the mood to show appreciation.