Related
Hello,
I have been using some release candidates of ICS which were available here on my i9000. Everything worked out generally fine. Sometimes my phone crashed and then it wouldn't want to go further than my i9000 and afterwards the google screen. Both screens would just repeat endlessly without the phone doing anything.
When this happened, I was always able to go back to recovery mode and uninstall everything and reinstall the rom. This would always solve my problem.
Now here is my current issue: on Saturday my phone crashed again, but now I can NOT enter recovery mode any more. Whenever I plug in a usb cable or normal cable to charge my phone it shows the calculating sign and after a few secs it's gone and starts all over again instead of showing the green battery slowly getting full.
The only thing which works is getting into download mode. So I tried to get odin to work. I installed kies to get the usb drivers and I opened odin (on both windows and a mac), but it does NOTHING.
Is there any other way I can reset my phone to get it somehow working again? Is there another way to get into recovery besides the buttons or using odin? I know of ADB but that requires the phone to be on....
When you plug your phone in (and enter download mode) what device type does windows detect it as?
Because you can get to download mode normally a "good" sign that it isn't bricked (and even when "bricked" it can be un-bricked)
Edit
Just tested mine, entered download mode and odin shows it connected on Com6, device manager shows it connected as a "Samsung Mobile Modem"
try and install the samsung modem drivers separately then try and connect connect
Hi,
first, be sure that all Kies-services are disabled via Taskmanager otherwise ODIN wont work correct!
then Bring your SGS1 to the Downloadmode, connect the USB_cable at the phone.
fullfill all sections you need in ODIN (PDA-Kernle, CODE-modem, CSC-CSC, pitfile512) klick repartition on
then connect your SGS1 via USB to the PC
Odin will show "connected"
Press start.
http://www.youtube.com/watch?v=1RoZU5ZPMS4
if your still stuck checkout this video might help good luck
Hello, my Samsung Galaxy S GT-i9003 was working fine yesterday, but now it stays stuck on the samsung logo when booting. I'm trying to flash it, the thing is, I can't get my computer to detect my phone, it shows up as an unkown device. I tried a factory reboot etc.. didn't work, and I can't even use it as a mass storage device since it's bricked. I used all the newest drivers, the newest version of kies but it still doesn't work.
I'm on windows 7/64 bit btw.
Thank you in advance.
Are you able to enter into download mode? (hold volume down + home + power)
If not, You can try to make (or buy) a JIG which will force download mode and you can flash a new ROM with Odin
Regards
I can enter in download mode, the thing is, my computer detects my phone as an "unknown device" and it isn't recognised by Odin either, which means I can't flash it.
are you sure the drivers are installed correctly? I recently had problems with the USB cable.. try another one and if possible, other PC....
I installed many times the drivers, using kies or without kies, the result is just the same, maybe it's the cable.
Try to change the cable and the USB port. Last week I tried to update a Motorola Atrix and the same thing happened, unknown device. Then I changed the USB Cable and voila... worked !
Let me know if it works....
Regards
just wondering if you have resolved this yet ? I have same problem tried all usb drivers i can find , 5 different computers , jig , odin still not detect and windows show unknown device detected.
Sent from my Dell Streak using XDA
Guys I had the same problem. After trying many pc, drivers, cables combinations I came to a conclusion that the usb port on the phone itself must be damaged. After taking a close look, I saw some of the gold contacts damaged/missing.. That might be the case with your phone aswell. Look at the pins and if yo usee some visual damage you know what the problem is. Even if you dont see it, it still might be a problem.
Hello guys.
I got a galaxy s (GT-I9000) from someone, so don't know what theyve been doing with it. Anyway, when I try to turn the phone ON, either it goes to the cyanogen mod splashscreen and reboots, and does that on a loop. Or it simply doesnt turn on. I cannot get into recovery mode, however I can get into download mode. I usually have to pull the battery a few times before I can either turn it on or get into download mode. Yesterday, when I plugged it in USB while OFF, no indication of charging (atleast visual) on screen was visible. Today, I plugged it in USB while phone was OFF and the battery indicator is seen, but battery si empty and only white "cirsle" is on middle, doing nothing. It stays that way for about 20-30 seconds, then the screen goes black, and only the white circle thingy is seen for a few seconds, then goes back to battery with that circle.
Anyway, when I got it in download mode a few times, I tried to plug it in PC to do something with ODIN, but it doesnt detect it. Windows says "USB Device Not Recognized" with the yellow triangle. I searched threads here and on google, and tried all I could think of.
So, I tried to reinstall drivers atleast 3 times, rebooting the PC in the process, cleaning the registry each time. Tried all of my 6 USB ports on PC. Tried 2 USB cables.
I had a galaxy s before, and setup on my PC was fine (so the drivers, cables, usb ports) were all OK, I could use odin and all. Thats why I dont think the problem is on my PC, or I must be missing something.
I have win7 x64 for the record.
I would just like to get this phone to work, any suggestions?
9000man said:
Hello guys.
I got a galaxy s (GT-I9000) from someone, so don't know what theyve been doing with it. Anyway, when I try to turn the phone ON, either it goes to the cyanogen mod splashscreen and reboots, and does that on a loop. Or it simply doesnt turn on. I cannot get into recovery mode, however I can get into download mode. I usually have to pull the battery a few times before I can either turn it on or get into download mode. Yesterday, when I plugged it in USB while OFF, no indication of charging (atleast visual) on screen was visible. Today, I plugged it in USB while phone was OFF and the battery indicator is seen, but battery si empty and only white "cirsle" is on middle, doing nothing. It stays that way for about 20-30 seconds, then the screen goes black, and only the white circle thingy is seen for a few seconds, then goes back to battery with that circle.
Anyway, when I got it in download mode a few times, I tried to plug it in PC to do something with ODIN, but it doesnt detect it. Windows says "USB Device Not Recognized" with the yellow triangle. I searched threads here and on google, and tried all I could think of.
So, I tried to reinstall drivers atleast 3 times, rebooting the PC in the process, cleaning the registry each time. Tried all of my 6 USB ports on PC. Tried 2 USB cables.
I had a galaxy s before, and setup on my PC was fine (so the drivers, cables, usb ports) were all OK, I could use odin and all. Thats why I dont think the problem is on my PC, or I must be missing something.
I have win7 x64 for the record.
I would just like to get this phone to work, any suggestions?
Click to expand...
Click to collapse
go to any mobile maintenance shop near to you cause there is nothing you can do for that
That is the only solution? Is there nothing more I could try?
9000man said:
That is the only solution? Is there nothing more I could try?
Click to expand...
Click to collapse
as far as I know
I will probobly try to get phone recognized by odin on a win XP pc today or tommo. IF that wont work, I read about something that JTAG could help me.. Can anyone confirm?
I'm having exactly the same problem actually. My son's S1 was running an old version of DarkyROM (back from when it was mine) and it got a bit messy so I decided to run it up to a CM9 nightly. Ran the Heimdall stuff as per instruction, got CM9 up and running but hosed it when I tried to flash the Google Apps package. From thereonin, formats and clearing everything leaves it upbootable but recovery and download are easily accessible. Odin just doesn't see it though.
Cause?
---------- Post added at 02:46 PM ---------- Previous post was at 02:45 PM ----------
Oh yes, I might add that I can still mount by USB and upload ROMs etc. however trying to reinstall CM9 now gives me a Status 7 error and kicks me out. Grr.
---------- Post added at 03:32 PM ---------- Previous post was at 02:46 PM ----------
Possibly solved. Go here:
http://forum.cyanogenmod.com/topic/41704-cant-install-cwm-recovery-on-my-rooted-galaxy-s2/
Heimdall seems a little picky, so if it throws up an error when everything seems fine then run zadig.exe in the /drivers folder of the Heimdall install, Options > List All Drivers, select Samsung USB Composite device in the dropdown and Install/Replace the driver. Do this in download mode. Then use the Heimdall frontend to push the stock ROM to your phone as per that link.
Yep. Just checked. Phone now booting. Give me a shout and I'll help you do exactly what I did.
I can now confirm that the PC setup, drivers, cable and pc usb ports are all fine. Had another GT-I9000 from a friend and odin connected instantly, could flash stuff no problem.
So on my GT-I9000 something else must be the problem. Can anyone give me another option or is the JTAG my only option?
So when I turn the phone ON, "GALAXY S CyanogenMod" appears and loops... I cant get into recovery using VOL+ ; power ; menu (or any other button combo, must have tried everything) but I can get into download using VOL- ; power ; menu... But if I connect phone to PC, odin dont see it and windows says "USB Device Not Recognized".
I've heard of people getting connected with nexus drivers, who knows what was on the phone before right.?
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
When you press volume down + Home button + power on then you get the Download screen on the phone. However, that does not allow Odin to detect the phone and make the COM box turn yellow. You also need to press the volume up in order to activate the Download mode and turn the COM box yellow.
OKAY I have an update!!
I sent the phone to be JTAG(ged). I have no idea what they did, but the phone boots up now! I can use it normal, I can go to stock recovery or to download mode.
However, I have a new problem now. I cant connect the phone to PC with usb cable, it doesnt detect it. The phone makes the "sound" when I connect the usb cable, battery icon gets that electricity power icon, so it chatges, but on windows I get "USB device not recognized" with yellow triangle.
I tried it with USB debugging on AND off, I tried all 3 modes in usb settings (mass storage, kies, media player) and always same result.
Tried to connect while in download mode, even pressed volume up while connected (once tried to hold vol up, made no difference). Odin dont detect it, and windows says "USB device not recognized" with yellow triangle.
What could be the issue here? What else can I try? I will point out that PC setup should be fine (tried another I9000 from a friend worked no problem) but just in case, I will uninstall drivers, wipe registry, install new drivers, try every usb port and 2 usb cables to try to get it connected.
Any ideas?
hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh
Mate, you need to simplify your problems. (And please don't quadrapost in other forums.)
From what I can make out of it:
1. Your 1st device is working properly. Great!
2. Your 2nd and 3rd isn't working properly.
3. You can't enter recovery and ODIN isn't working properly.
By normal mode, I'm assuming you mean while Android is running. ODIN cannot detect the device when it's in Android. Reboot into download mode first, then ODIN the device.
Now, ODIN isn't working either? I'm afraid you'll dislike this answer, but check the USB wire, again and again. I've had some weird ODIN problems previously and it's caused by a bad connection.
Your 3rd device is soft-bricked (Cannot boot into Android nor Recovery, only Download.) Therefore, the problem lies within either
- the USB wire
Or
- Driver
Or
- Unsupported ODIN.
Good luck, hope you'll figure it out soon. That's all I can help you with unless you provide more clarified information/symptoms.
MarXhack-TN said:
hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh
Click to expand...
Click to collapse
Try changing the USB port or using another PC... if you are running Windows 7 you won't face any problem
Viper The Ripper said:
Try changing the USB port or using another PC... if you are running Windows 7 you won't face any problem
Click to expand...
Click to collapse
yes i do -_-
panpjp said:
Mate, you need to simplify your problems. (And please don't quadrapost in other forums.)
From what I can make out of it:
1. Your 1st device is working properly. Great!
2. Your 2nd and 3rd isn't working properly.
3. You can't enter recovery and ODIN isn't working properly.
By normal mode, I'm assuming you mean while Android is running. ODIN cannot detect the device when it's in Android. Reboot into download mode first, then ODIN the device.
Now, ODIN isn't working either? I'm afraid you'll dislike this answer, but check the USB wire, again and again. I've had some weird ODIN problems previously and it's caused by a bad connection.
Your 3rd device is soft-bricked (Cannot boot into Android nor Recovery, only Download.) Therefore, the problem lies within either
- the USB wire
Or
- Driver
Or
- Unsupported ODIN.
Good luck, hope you'll figure it out soon. That's all I can help you with unless you provide more clarified information/symptoms.
Click to expand...
Click to collapse
thnks so much but i also try this
MarXhack-TN said:
hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh
Click to expand...
Click to collapse
Hi There
The solution for the 3rd phone is to take it to recovery and factory rest it.
Good evening everyone!
I need help so bad, so urgent!
It was happen when i try to install TWRP on my SONY Xperia SP using an amazing stupid way, using flash boot command coz i cant install twrp using flash recovery command, but i dont know why that fastboot take so long time and just display <waiting for device>. So i decided to remove my USB and plug it once again. Suddenly, my laptop show a notif. "USB not recognized" and the blue LED is gone, then SONY logo appear and start to charging and u can hear connect-"Not recognized"-and disconnect sounds from laptop. But, when the display turn off, it's turn on again, and 5 seconds later u can hear disconnected sounds, then charging stopped. Few later, the logo come again and charging again, and the same thing happend. When i try to charge from the wall charger, it can charging normally, but I CAN'T TURN THE PHONE ON. It's like the power button has been disabled. So i unplug the charger and turn my XSP on, it can boot normally. But when i try to connect to charger, it wont charging. So on my laptop, even my laptop didnt notice any USB, and my XSP didn't show any LED.
Help me to fix this. I can't charge my phone except to turn it off T_T. Pls give me a way out T_T.
Status: Installed AOSP Oreo 8.0.0 huashan, not rooted and no cwm/twrp (this is what i need to install, so i can root my phone, the latest cwm i installed gone after flashing AOSP ROM), cant connect to any USB even in fastboot mode (i've installed the driver).
seems like you got dust in your usb port , it happened to me once , i freaked out real bad. just try clearing it with some needle or stuff , also you might wanna use emma to revert your phone back to its original stock firmware.
AsadXperia said:
seems like you got dust in your usb port , it happened to me once , i freaked out real bad. just try clearing it with some needle or stuff , also you might wanna use emma to revert your phone back to its original stock firmware.
Click to expand...
Click to collapse
what's emma? how to use that?
it's a sony developer tool. You can use it to install original os on your phone , you just need a pc and internet connection , here
https://talk.sonymobile.com/t5/Andr...ony-Flash-tool-for-Xperia-devices/td-p/307318
Also , just save the customization file and delete the rest , download emma sony flash tool from google ( latest version ) copy the customization file after installing it.
After it completes install , run it and wait for it to open , it may take some time during its first run.
Now plug in ur phone , while holding volume down button , you should see green light on bottom , that indicates you're on recovery mode or flashmode. The Emma tool will detect device and start installing original firmware on it.
AsadXperia said:
it's a sony developer tool. You can use it to install original os on your phone , you just need a pc and internet connection , here
Also , just save the customization file and delete the rest , download emma sony flash tool from google ( latest version ) copy the customization file after installing it.
After it completes install , run it and wait for it to open , it may take some time during its first run.
Now plug in ur phone , while holding volume down button , you should see green light on bottom , that indicates you're on recovery mode or flashmode. The Emma tool will detect device and start installing original firmware on it.
Click to expand...
Click to collapse
that was my problem. when i plug my phone in fastboot or bootloader, pc wont detect it, it says "USB not recognized". also when my phone is standby, it wont detect any usb i plugged in, wall charger or usb pc.
i've installed latest driver for XSP, and USB debugging's on.
have you read my first comment? , clear your phone's usb slot and then try replugging , if it fails try it on a different computer , the problems usually with windows 10 as it loses recognizing devices after some fail attempts.