need some help plz - Galaxy Ace S5830 Q&A, Help & Troubleshooting

hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh

Mate, you need to simplify your problems. (And please don't quadrapost in other forums.)
From what I can make out of it:
1. Your 1st device is working properly. Great!
2. Your 2nd and 3rd isn't working properly.
3. You can't enter recovery and ODIN isn't working properly.
By normal mode, I'm assuming you mean while Android is running. ODIN cannot detect the device when it's in Android. Reboot into download mode first, then ODIN the device.
Now, ODIN isn't working either? I'm afraid you'll dislike this answer, but check the USB wire, again and again. I've had some weird ODIN problems previously and it's caused by a bad connection.
Your 3rd device is soft-bricked (Cannot boot into Android nor Recovery, only Download.) Therefore, the problem lies within either
- the USB wire
Or
- Driver
Or
- Unsupported ODIN.
Good luck, hope you'll figure it out soon. That's all I can help you with unless you provide more clarified information/symptoms.

MarXhack-TN said:
hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh
Click to expand...
Click to collapse
Try changing the USB port or using another PC... if you are running Windows 7 you won't face any problem

Viper The Ripper said:
Try changing the USB port or using another PC... if you are running Windows 7 you won't face any problem
Click to expand...
Click to collapse
yes i do -_-

panpjp said:
Mate, you need to simplify your problems. (And please don't quadrapost in other forums.)
From what I can make out of it:
1. Your 1st device is working properly. Great!
2. Your 2nd and 3rd isn't working properly.
3. You can't enter recovery and ODIN isn't working properly.
By normal mode, I'm assuming you mean while Android is running. ODIN cannot detect the device when it's in Android. Reboot into download mode first, then ODIN the device.
Now, ODIN isn't working either? I'm afraid you'll dislike this answer, but check the USB wire, again and again. I've had some weird ODIN problems previously and it's caused by a bad connection.
Your 3rd device is soft-bricked (Cannot boot into Android nor Recovery, only Download.) Therefore, the problem lies within either
- the USB wire
Or
- Driver
Or
- Unsupported ODIN.
Good luck, hope you'll figure it out soon. That's all I can help you with unless you provide more clarified information/symptoms.
Click to expand...
Click to collapse
thnks so much but i also try this

MarXhack-TN said:
hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh
Click to expand...
Click to collapse
Hi There
The solution for the 3rd phone is to take it to recovery and factory rest it.

Related

Help...ODIN won't recognize phone in download mode

I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it

[Q] Unkown device on bricked phone

Hello, my Samsung Galaxy S GT-i9003 was working fine yesterday, but now it stays stuck on the samsung logo when booting. I'm trying to flash it, the thing is, I can't get my computer to detect my phone, it shows up as an unkown device. I tried a factory reboot etc.. didn't work, and I can't even use it as a mass storage device since it's bricked. I used all the newest drivers, the newest version of kies but it still doesn't work.
I'm on windows 7/64 bit btw.
Thank you in advance.
Are you able to enter into download mode? (hold volume down + home + power)
If not, You can try to make (or buy) a JIG which will force download mode and you can flash a new ROM with Odin
Regards
I can enter in download mode, the thing is, my computer detects my phone as an "unknown device" and it isn't recognised by Odin either, which means I can't flash it.
are you sure the drivers are installed correctly? I recently had problems with the USB cable.. try another one and if possible, other PC....
I installed many times the drivers, using kies or without kies, the result is just the same, maybe it's the cable.
Try to change the cable and the USB port. Last week I tried to update a Motorola Atrix and the same thing happened, unknown device. Then I changed the USB Cable and voila... worked !
Let me know if it works....
Regards
just wondering if you have resolved this yet ? I have same problem tried all usb drivers i can find , 5 different computers , jig , odin still not detect and windows show unknown device detected.
Sent from my Dell Streak using XDA
Guys I had the same problem. After trying many pc, drivers, cables combinations I came to a conclusion that the usb port on the phone itself must be damaged. After taking a close look, I saw some of the gold contacts damaged/missing.. That might be the case with your phone aswell. Look at the pins and if yo usee some visual damage you know what the problem is. Even if you dont see it, it still might be a problem.

phone in bootloop and usb not recognized

Hi everyone, I have the same problem as shown below, my phone is stuck in lg logo bootloop and the only thing i can do is enter in download mode, no recovery mode, no normal mode, etc. but my usb isn't recognized in windows nor in linux, i've tried 3 different cables and 4 diferent pc's and nothing. could this be a physical problem? i did the steps below.
what i did:
1-uninstalled kies and installed again
2- installed driver again
3-tried on other PC
4-re installed windows seven on laptop
5-changed cable
6-formatted my sgs 2 times
7-usb debugging and other types of connection does not work.
8 - then flashed with mobile odin and it failed creating a bootloop.
NOT ALL DONE ABOVE WORKED
PLEASE HELP ME
bonethugs said:
PLEASE HELP ME
Click to expand...
Click to collapse
run through the MY Android Solutions link below, have listed all your options therein
thanks but it doesn't work for me, i think it's a usb connector pin problem or something, but i'm afraid of buying one and brake the phone soldering the connector.... any other option to check if the connector is broken?
thanks.
Do you can go to the download mode? Try with odin on PC.
Sent from my GT-I9000 using xda app-developers app
vinogradska5a said:
Do you can go to the download mode? Try with odin on PC.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes. I can go to download mode but my phone is not recognized in 3 different computers i've tried. I also have tried in linux and with dofferent cable
bonethugs said:
Yes. I can go to download mode but my phone is not recognized in 3 different computers i've tried. I also have tried in linux and with dofferent cable
Click to expand...
Click to collapse
I understand but sometimes you can't connect whit PC but whit Odin its doing. (Sometimes)
Start Odin with Windows and try it.
Very important - your phone must bee on the DOWNLOAD MODE. If its not doing your USB Connector on the phone its defect.
I have same problem having 6 months ago.
Sent from my GT-I9000 using xda app-developers app
Are your drivers installed? Install those, connect the phone so the pc to recognize the phone and begin install of drivers for it. When you plug in the cable be sure to be in download mode, you need the mtp driver to be installed. Remove the fone when it finishes.
After you install the drivers open odin add the files and only after plugin the phone in download mode. It should be ok then.
MobileFirmware.com rep and SGS user
It's not driver problem. I've flashed with odin and heimdall a lotof times. The phone failed to recognized time ago but when rebooting aleays solved thw problem, not this time.i get error code 43. If i force driver install i get error code 10 in device manager
Try to remove the drivers first. After that close the pc, remove the power cord and hit the on button. It will discharhe any charge left in your sistem (it will reset your usbs). Plugin the cord, open the pc normaly and then reinstall the drivers.
Put the phone in dld mode and see what happens.
Hope u resolve ur problem this way.
MobileFirmware.com rep and SGS user

[Q] I`ve got a situation ...pls help !

Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Cocutzul said:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Click to expand...
Click to collapse
Try to use different usb port on pc. To pull out, push in cable in usb port while phone is in download mode and Odin is started. Try another usb cable.
P.S. what did you do that you got non booting system?
Sent from my GT-I9070 using Tapatalk
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Cocutzul said:
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Click to expand...
Click to collapse
Is recognised by Odin?
If it is, then reflash stock!
highmage said:
Is recognised by Odin?
If it is, then reflash stock!
Click to expand...
Click to collapse
Nop
Cocutzul said:
Nop
Click to expand...
Click to collapse
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Do you have any PC activity when you get to Recovery? I read that it just has black screen, but it is functional. Maybe ADB shell is working, so you can flash CoCore over it.
You can try to install this on PC: http://forum.xda-developers.com/showthread.php?t=2105707
There you have adb shell, and with some commands you can install kernel. After that you can reboot to Recovery again and you will have working Recovery (but still non booting system). Next step is to download some JB stock based ROM and to push it to sd card (you can use that Total commnader in link I gave you). After that just install ROM and it should work.
I am at work now, so I can't help you in details.
shut_down said:
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Click to expand...
Click to collapse
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Cocutzul said:
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Click to expand...
Click to collapse
Read rest of my post, I change it.
If you can't handle it - find someone that has more knowlage in Android to help you (that can do it for you).
Uninstall Kies if you have reinstalled it and remove any samsung drivers, do a registry clean on Windows with CCleaner (you can find it with Google), reboot pc then install this usb drivers, reboot again and try if now the phone in download mode is recognized on Odin (firstly powen on in download mode then connect to usb)

Categories

Resources