[Q] I`ve got a situation ...pls help ! - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !

Cocutzul said:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Click to expand...
Click to collapse
Try to use different usb port on pc. To pull out, push in cable in usb port while phone is in download mode and Odin is started. Try another usb cable.
P.S. what did you do that you got non booting system?
Sent from my GT-I9070 using Tapatalk

Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all

Cocutzul said:
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Click to expand...
Click to collapse
Is recognised by Odin?
If it is, then reflash stock!

highmage said:
Is recognised by Odin?
If it is, then reflash stock!
Click to expand...
Click to collapse
Nop

Cocutzul said:
Nop
Click to expand...
Click to collapse
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Do you have any PC activity when you get to Recovery? I read that it just has black screen, but it is functional. Maybe ADB shell is working, so you can flash CoCore over it.
You can try to install this on PC: http://forum.xda-developers.com/showthread.php?t=2105707
There you have adb shell, and with some commands you can install kernel. After that you can reboot to Recovery again and you will have working Recovery (but still non booting system). Next step is to download some JB stock based ROM and to push it to sd card (you can use that Total commnader in link I gave you). After that just install ROM and it should work.
I am at work now, so I can't help you in details.

shut_down said:
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Click to expand...
Click to collapse
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .

Cocutzul said:
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Click to expand...
Click to collapse
Read rest of my post, I change it.
If you can't handle it - find someone that has more knowlage in Android to help you (that can do it for you).

Uninstall Kies if you have reinstalled it and remove any samsung drivers, do a registry clean on Windows with CCleaner (you can find it with Google), reboot pc then install this usb drivers, reboot again and try if now the phone in download mode is recognized on Odin (firstly powen on in download mode then connect to usb)

Related

Help...ODIN won't recognize phone in download mode

I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.

Phone Stucked At "At&t World Phone Screen"

I have Cognition V4.5.3
Im A Noob At This... Tried Ti Flash A Kernel With [APP] SGS Kernel FLasher
When I Rebooted My Phone Its Just Stuck At The Boot Screen...
Does Not Want To Go In Recovery Mode... Just Download Mode....
But Heimdall Does Not Recognize My Device...
What Can I Do? I Need To Get My Phone Back, Since Its A Gift
Thanks...
and i only have a mac... =/
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Try Odin 1 Click. You'll find it on here somewhere. It wil take you back to stock 2.1 Eclair. Then you can READ ABOUT flashing other ROMs and proceed from there.
bertito2580 said:
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Click to expand...
Click to collapse
im sorry but most of us can't even help you IF we want to The users of windows based PC's are greater in this forums compared to Macs. if there is drivers for mac, are they installed?
Since you only have a Mac, I would suggest installing Windows through Boot-Camp (included in Mac OSX) on a different partition. I read Galaxy S doesn't have drivers support for Mac OSX Leopart or later, not entirely sure if its true though, but I do have a MacBook Pro and had no success in finding a way to connect my phone to it by USB... Good thing I had a regular old Windows PC Desktop.
Then as Jack Man said, use Odin 1-Click found here
http://forum.xda-developers.com/showthread.php?t=731989
to reset your phone completely to factory settings, relatively simple to do as long as you read the instructions on that post. =)
Well since you only have a Mac and hiemidal is not see your phone i think your only option is to find a friend with a PC and give the Odin 1 click a try.
i ask my aunt for her pc,
Windows Vista 32-Bit
Downloaded And Installed The Drivers
Using Odin3 One-Click
I Put My Phone On Download Mode With The 3keyCombo
And The PC Says"USB Device Not Recognized"
Im Just Gettind Pissed And Stressed
It's My Only Phone.
What Can I Do To Fix This?
Also Tried Running Odin As Administrator... And NOthing...
bertito2580 said:
Also Tried Running Odin As Administrator... And NOthing...
Click to expand...
Click to collapse
Sir, just in case, did you reboot after installing drivers and BEFORE you tried connecting the device? Also, did you check if Odin detected your device when its connected in Download mode?
yes, and thats what in trying to do, to get odin to detect my phone in download mode...
Ok, is your phone detected by the operating system? If it does, then try using this other Odin thread instead, this one however will restore it to Stock Samsung Galaxy with 2.3 Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1127249
Don't have to follow the rest of the instructions to root it just in case, but see if that version of Odin detects your phone.
actually thats the problem... windows vista doesnt recognize my device, either my mac... is there a solution to my phone or not? please help
OMG please help ((
I've Installed Captivate Drivers
Also
Galaxy S General Drivers
But When I Put My Captivate On Download MOde It Just Says
"USB Device Not Recognized"
One of the devices attached to this computer has malfunctioned and
Windows does not recognize it.
Are you sure it goes in to Download Mode (little android with a shovel)? Also have u tried different usb ports?
Like the above said, are you sure you are in download mode?
What USB port are you using if ots a desktop computer. There are known issues using front usb, plug into the usb on the back of the tower.
Also, are you sure odin doesnt see it? I know windows doesnt like it, but start odin, put phone in download mode, connect to pc. What does odin show? Any connected devices?
Sent from my GT-I9000 using XDA App
yes, im sure its on download mode and tried all the ports...
Im gonna try on another pc
to see if its the pc

[Q] Samsung galaxy s plus problem

hi all,
i have the following problem...
yesterday i obtained the root permisions for the galaxy and then i installed a cwm... and after that i got the problem bootloop. i tried to use odin and fix it but my windows 7 doesn't recognize it (i installed samsung kies and all the drivers). then i removed the cwm recovery and now i get Deleting Cryption Meta Data message before i enter in stock recovery and can't do nothing. Any solution?
sorry for my bad english
Check this link may help : HERE
nothing if i connect the phone to the pc windows says USB device not recognized
Try this HERE
EwOkie said:
Try this HERE
Click to expand...
Click to collapse
the phone goes into download mode and recovery mode 3e stock...i see the battery logo and samsung logo but if i connect the phone when in download mode to the PC it doesnt recognize it
Ok Follow this here :
Unplug Phone from PC.. if using Kies uninstall it ...Reboot PC
Install Samsung latest USB Drivers.. Reboot PC when done
Open ODIN
Plug in Phone while in Download mode to PC.. till it Recognises it
Now open ODIN and Try again
Check My HOW TO at my signature and scroll to bottom
ewokie said:
ok follow this here :
Unplug phone from pc.. If using kies uninstall it ...reboot pc
install samsung latest usb drivers.. Reboot pc when done
open odin
plug in phone while in download mode to pc.. Till it recognises it
now open odin and try again
check my how to at my signature and scroll to bottom
Click to expand...
Click to collapse
all done bro!!! You are the best! Thanx a lot
No problem glad it worked out for you :good:
danielbulan97 said:
hi all,
i have the following problem...
yesterday i obtained the root permisions for the galaxy and then i installed a cwm... and after that i got the problem bootloop. i tried to use odin and fix it but my windows 7 doesn't recognize it (i installed samsung kies and all the drivers). then i removed the cwm recovery and now i get Deleting Cryption Meta Data message before i enter in stock recovery and can't do nothing. Any solution?
sorry for my bad english
Click to expand...
Click to collapse
hey buddy i experienced this problem before...
use this CWM6012-CM9-recovery ..
hope this help you
Sent from my GT-I9001 using xda premium

[Q] can't access recovery and odin!

hi all sorry for my bad english i'm italian
i had flash the PAC build 3 rom two days ago but i didn't like it because it restart every 5 min
The problem come when i try to connect to my pc and use odin because my pc won't recognise my phone!!!
i know there are a lot of thread like this but i never seen a person who need help to solve this problem!
-i uninstalled all of my driver and reinstall it again
-i uninstalled kies
-i try to flash a nandroid backup that i flash before but it stop when it need to restore /system
-i try to install twrp and format data,cache , system nut nothing change
-i format my win7 (yep i did it) but it says always uknown device
-my usb cable working well with oder device
The problem now is that i can only access to Download Mode but i can't connect to my pc!
i can't access recovery because i flash a lot of type of recovery (every cocafe twrp and cwm) and when i flash the 4.1 twrp the phone did''t boot in recovery.
I think it is too strange that when i was able to enter in recovery i can't do a /system format (the oder format done well).
I think that maybe my system corrupt after flash.
Thanks a lot guys i hope you can read my noob english haha
Try download a firmware at sammobile and go to download mode connect your phone with the computer and use google to find out how to flash firmware using odin and reboot then :victory:
Last thing do not flash any unstable rom
sorry for my bad english.
xxdavidchoyxx said:
Try download a firmware at sammobile and go to download mode connect your phone with the computer and use google to find out how to flash firmware using odin and reboot then :victory:
Last thing do not flash any unstable rom
sorry for my bad english.
Click to expand...
Click to collapse
and how?! my pc don't recognise my cell and in odin the COM window is empty
Did you try it on other PC/laptop? Or other cable?
Eliminate these possibilities and then see those done.
R_a_z_v_a_n said:
Did you try it on other PC/laptop?
Click to expand...
Click to collapse
Thanks Razvan
i try it but it always says tha is a uknown device
i think that odin mode i corrupt like my system
any other advice
That's weird.
Try a clean install Kies and Odin software (version 1.85).
But before that, clean the remains of the old existing software from your computer.
R_a_z_v_a_n said:
That's weird.
Try a clean install Kies and Odin software (version 1.85).
But before that, clean the remains of the old existing software from your computer.
Click to expand...
Click to collapse
Ok i'm now unistalling kies and drivers but as i say a format my win7 and nothing change...
AndyMcMars said:
Ok i'm now unistalling kies and drivers but as i say a format my win7 and nothing change...
Click to expand...
Click to collapse
Nothing change....always uknown device...
AndyMcMars said:
Nothing change....always uknown device...
Click to expand...
Click to collapse
How did you install kernels? From recovery or you used dd command in adb shell?
shut_down said:
How did you install kernels? From recovery or you used dd command in adb shell?
Click to expand...
Click to collapse
recovery
i notice that when i install my phone driver a pop up come on and says " mass storage controller -------------- Windows update no driver found"
OK thanks to all i resolve by deassembling and reassembling another micro usb from my cell
ths guys
AndyMcMars said:
and how?! my pc don't recognise my cell and in odin the COM window is empty
Click to expand...
Click to collapse
install usb drivers by installing kies in pc or laptop and then it will detect in odin

Can't flash stock S5570 rom

As the title says I can't flash it (2.3.6 gb). Everytime I connect the phone in download mode I get 'USB Not Recognized' error, I've updated KIES drivers already and nothing happened.
Sorry, but I don't know how to help you. I got the same problem when I used my Windows 8 PC.
On my WinXP PC, it's worked.
I'll give a try on XP , too. I tried on Win 8.1 and 7 and didn't worked.
fordawin said:
As the title says I can't flash it (2.3.6 gb). Everytime I connect the phone in download mode I get 'USB Not Recognized' error, I've updated KIES drivers already and nothing happened.
Click to expand...
Click to collapse
tomi456 said:
Sorry, but I don't know how to help you. I got the same problem when I used my Windows 8 PC.
On my WinXP PC, it's worked.
Click to expand...
Click to collapse
fordawin said:
I'll give a try on XP , too. I tried on Win 8.1 and 7 and didn't worked.
Click to expand...
Click to collapse
First, you have to install SAMSUNG USB Driver into your PC
Then only you can Flash your firmware with Odin
USB Driver: http://www.mediafire.com/download/7srv709j7nkivj0/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Odin Multi downloader: http://d-h.st/6Rx
Samsung usb drivers works only with Win7, xp, and older than these
Whole discription about "how to" is here: http://forum.xda-developers.com/showthread.php?t=1255305
Enjoy and press thanks button
Also enable USB debugging in phone's settings(if not done yet)

Categories

Resources