[Q] can't access recovery and odin! - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

hi all sorry for my bad english i'm italian
i had flash the PAC build 3 rom two days ago but i didn't like it because it restart every 5 min
The problem come when i try to connect to my pc and use odin because my pc won't recognise my phone!!!
i know there are a lot of thread like this but i never seen a person who need help to solve this problem!
-i uninstalled all of my driver and reinstall it again
-i uninstalled kies
-i try to flash a nandroid backup that i flash before but it stop when it need to restore /system
-i try to install twrp and format data,cache , system nut nothing change
-i format my win7 (yep i did it) but it says always uknown device
-my usb cable working well with oder device
The problem now is that i can only access to Download Mode but i can't connect to my pc!
i can't access recovery because i flash a lot of type of recovery (every cocafe twrp and cwm) and when i flash the 4.1 twrp the phone did''t boot in recovery.
I think it is too strange that when i was able to enter in recovery i can't do a /system format (the oder format done well).
I think that maybe my system corrupt after flash.
Thanks a lot guys i hope you can read my noob english haha

Try download a firmware at sammobile and go to download mode connect your phone with the computer and use google to find out how to flash firmware using odin and reboot then :victory:
Last thing do not flash any unstable rom
sorry for my bad english.

xxdavidchoyxx said:
Try download a firmware at sammobile and go to download mode connect your phone with the computer and use google to find out how to flash firmware using odin and reboot then :victory:
Last thing do not flash any unstable rom
sorry for my bad english.
Click to expand...
Click to collapse
and how?! my pc don't recognise my cell and in odin the COM window is empty

Did you try it on other PC/laptop? Or other cable?
Eliminate these possibilities and then see those done.

R_a_z_v_a_n said:
Did you try it on other PC/laptop?
Click to expand...
Click to collapse
Thanks Razvan
i try it but it always says tha is a uknown device
i think that odin mode i corrupt like my system
any other advice

That's weird.
Try a clean install Kies and Odin software (version 1.85).
But before that, clean the remains of the old existing software from your computer.

R_a_z_v_a_n said:
That's weird.
Try a clean install Kies and Odin software (version 1.85).
But before that, clean the remains of the old existing software from your computer.
Click to expand...
Click to collapse
Ok i'm now unistalling kies and drivers but as i say a format my win7 and nothing change...

AndyMcMars said:
Ok i'm now unistalling kies and drivers but as i say a format my win7 and nothing change...
Click to expand...
Click to collapse
Nothing change....always uknown device...

AndyMcMars said:
Nothing change....always uknown device...
Click to expand...
Click to collapse
How did you install kernels? From recovery or you used dd command in adb shell?

shut_down said:
How did you install kernels? From recovery or you used dd command in adb shell?
Click to expand...
Click to collapse
recovery
i notice that when i install my phone driver a pop up come on and says " mass storage controller -------------- Windows update no driver found"

OK thanks to all i resolve by deassembling and reassembling another micro usb from my cell
ths guys

AndyMcMars said:
and how?! my pc don't recognise my cell and in odin the COM window is empty
Click to expand...
Click to collapse
install usb drivers by installing kies in pc or laptop and then it will detect in odin

Related

[Q] USB device malfunctioned

I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
banttu said:
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Click to expand...
Click to collapse
banttu said:
I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
Click to expand...
Click to collapse
try uninstalling the drivers for your phone on the pc.
factory reset your phone.
Does it recognise in odin when in download mode?
The same issue. I have Ultibread 1.4 and wanted to flash the JVK but windows keep disabling it. Can't find the device either in normal state or in download state. Odin also didn't recognize it
I'm on win7 x86
Did a factory reset - still the same
I tried different cables and PC's - no luck Anyone !! Any idea?
nightrave said:
I tried different cables and PC's - no luck Anyone !! Any idea?
Click to expand...
Click to collapse
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Didn't help in my case. I did the backup and wipe/factory reset the phone. Enabled the debugging mode, removed kies and all the drivers, rebooted the phone and the pc, connected the phone to pc and had the same message Any idea where I could got it wrong?
P.S. ANd the phone is now extreeeemly laggy and unresponsive
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
nightrave said:
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
Click to expand...
Click to collapse
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
banttu said:
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
Click to expand...
Click to collapse
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
nightrave said:
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
Click to expand...
Click to collapse
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
banttu said:
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
Click to expand...
Click to collapse
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
nightrave said:
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
Click to expand...
Click to collapse
Well, there seems to be only a one solution.
You have to uninstall the phones drivers, and install them again.
Then plug your to your computer in download mode and it'll install rest of the drivers.
Then Odin should be able to recognize your phone and your good to flash stock.
But you really, really have to uninstall the drivers
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
nightrave said:
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
Click to expand...
Click to collapse
Hmm.. I did change the computer.. Maybe you should put the drivers on a flash drive and go to your friends computer to flash.
The thing is that he does not have the drivers installed before either.
Don't know why it worked for me but... it worked.
I am going to try the last thing - I have a System backup from the time I definitely didn't have them on the PC and see if this helps....
Nope.... Didn't help.... I am completely desperate. Maybe anyone would have another magical solution?
Guys! ANy idea? Plzzzzz. I'd do anything to get it back to life
Me too i get "unknown device" when attached with usb in download mode...ive been trying to get it back workin for a week now...tried everything...which means i can't flash it to gingerbread
Anyone got any ideas ?
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
nightrave said:
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
Click to expand...
Click to collapse
Hi!
I have a similar problem.
For few days, I cannot connect my SGS to my Notebook.
I have windows 7 x64 installed, and it has never had any problems with connections.
Now, I don't know why, but I cannot connect it.
I tried to connect it to another computer, which has windows 7 x86.
And it was succesfull!
Now, it seems, that I don't have a hardware issue, but I cannot imagne, how I could solve this problem.
I already tried these:
- remove drivers/programs
- tried other USB slots
- downloaded newer USB driver for x64
- removed USB drivers (all of them)
- unplugged my notebook for over 5 minutes (also removed the battery)
Every time I plug my SGS to my PC only this message appears:
"unknown device" - or something similar, because I have a hungarian windows 7.
Sorry about my english.
Has anyone any idea?
Thx for advance

[Q] No root recovery aymore

Dear Forum,
I have a I9001. I've been busy with it for a week now and read and tried allot. Nothing seems to work!
So , my I9001 doesn't have a recovery any more. No root or CWM. The rom works (2.3.5) but crashes or freezes. Then tried every
combo in the book to get into the recovery mode but nothing works.
So I ask you biggest android forum of the world: What the hell is going on??
Tried to get into recovery by recovery boot by pc, tried installing other roms or kernels or whatever.
Also getting a mmc boot mbr read failed when trying above stuff by odin.
Also when I shutdown the phone and I start it up again then it has to be installed again like country and date etc etc...
Thanks in forward for answering.
Greetz,
Happybeat
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
M322 said:
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
Click to expand...
Click to collapse
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Dark_Savior said:
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Click to expand...
Click to collapse
It's insane haha im still trying stuff. Now when I reboot the phone I have to says what country etc etc...but when I try to connect to wifi it says TWLauncher chrashed...I still have connection with the phone by PC. Is there maybe anything what I can change or do?
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
AFAIK - As Far As I Know
happybeat said:
Is there maybe anything what I can change or do?
Click to expand...
Click to collapse
Well if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app
ell if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app[/QUOTE]
Ok ill check that out. I'll let you know.
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
happybeat said:
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
Click to expand...
Click to collapse
Well I think it should be a clean install and if I connect my phone in download mode to the pc I haven't access to the internal storage!
Did you do it like it is supposed in this tutorial? http://forum.xda-developers.com/showthread.php?t=1922505
By the way are you on a stock rom or not?
Yes, it's important to tell are you on stock or custom Rom
Mikroos said:
Yes, it's important to tell are you on stock or custom Rom
Click to expand...
Click to collapse
Sorry for my late answer!
stock I think. This is every info I have on the phone:
About phone:
Firmware: 2.3.5
baseband: i9001xxkpf
kernel: 2.6.35.7-perf [email protected] #1
build: gingerbread.xxkpg
when I do *#1234#:
pda: i9001xxkpg
phone: i9001xxkpf
csc: i9001xenkp1
That's it...
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Sorry don't know any solution but I'm quite new in here so maybe you can post it into/revive this thread because the Q&A is (in my opinion) not well visited by I9001 users because it's meant to be for i9000.
http://forum.xda-developers.com/showthread.php?t=1826216
Sent from my GT-I9001 using xda app-developers app
happybeat said:
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Click to expand...
Click to collapse
Try a reset and if that is not working try a restock.
fotbal5 said:
Try a reset and if that is not working try a restock.
Click to expand...
Click to collapse
Thats the problem. There is no way of getting into recovery mode. I can get into download mode but not into recovery mode. It's like it is vanished.
And I dont know if someone from the mods could put this into the 9100 section? I thought I had to put questions here since there isn't a Q/A for 9001...
happybeat said:
Thats the problem.
Click to expand...
Click to collapse
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
M322 said:
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Yep did that. Doesnt work. The thing is also that I cant change anything. Everytime when I reboot I need to install again. So it doesnt remember. Same when I connect it to the pc and I remove a file from download that I do not need it doesn't remove the file because the next time I reboot its back. It's like the internal is locked?
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Marshian said:
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Click to expand...
Click to collapse
Ok so thank you for this but unfortunatly it just didnt work. I think it is dead. Does Jtagg do any difference? Like hook it up to that machine?
So what it does at this moment:
It starts up but everytime you start up it will ask you to install everything again. So it asks what country etc.etc...
When I am in it appears to work but starting apps just makes it all crash or freeze.
Im a bit lost at the moment to do anything. It just looks that it doesnt memorize.
I can hook it up to the pc but you cant remove or add anything. You can just look and scroll through it.

[Q] Bricked and not recognized by usb..

Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..

[Q] I`ve got a situation ...pls help !

Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Cocutzul said:
Hy all,
My phone it s booting only in recovery mode and that is a black screen and i can t do anything and my pc also can t see the device ... how can i fix this problem ? I can only enter in download mode ...but if my device is not recognized my posibilities are limitated or 0 !
I unnistalled kies and all samsung usb driver and installed again samsung usb driver and my pc see the device but don t recognize the drivers. i can t use odin also.
Pls help !
Click to expand...
Click to collapse
Try to use different usb port on pc. To pull out, push in cable in usb port while phone is in download mode and Odin is started. Try another usb cable.
P.S. what did you do that you got non booting system?
Sent from my GT-I9070 using Tapatalk
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Cocutzul said:
Flashing cm 10.2.. I ve changed the cable, the usb ports...same sitation...my pc see an unknown device and install the drivers 1.5.27.00 and that s all
Click to expand...
Click to collapse
Is recognised by Odin?
If it is, then reflash stock!
highmage said:
Is recognised by Odin?
If it is, then reflash stock!
Click to expand...
Click to collapse
Nop
Cocutzul said:
Nop
Click to expand...
Click to collapse
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Do you have any PC activity when you get to Recovery? I read that it just has black screen, but it is functional. Maybe ADB shell is working, so you can flash CoCore over it.
You can try to install this on PC: http://forum.xda-developers.com/showthread.php?t=2105707
There you have adb shell, and with some commands you can install kernel. After that you can reboot to Recovery again and you will have working Recovery (but still non booting system). Next step is to download some JB stock based ROM and to push it to sd card (you can use that Total commnader in link I gave you). After that just install ROM and it should work.
I am at work now, so I can't help you in details.
shut_down said:
Why didn't you read CM 10.2 thread? It is written that it has black screen on recovery.
Try with Odin again, try to pull and put back usb cable. You have Windows 7? Does it show new hardware at all?
You have used Odin before? If not look for some guide on youtube. Maybe you miss something.
Try with ODIN v1.85 and ODIN v3.xx
Click to expand...
Click to collapse
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Cocutzul said:
I wanted to flash somthing else ... and for no attention i flashed that! I tried odin 1.85 and 3.04 and 3.07 on win 7,8 and xp sp3 . The device is unkonwn for all of this .
Click to expand...
Click to collapse
Read rest of my post, I change it.
If you can't handle it - find someone that has more knowlage in Android to help you (that can do it for you).
Uninstall Kies if you have reinstalled it and remove any samsung drivers, do a registry clean on Windows with CCleaner (you can find it with Google), reboot pc then install this usb drivers, reboot again and try if now the phone in download mode is recognized on Odin (firstly powen on in download mode then connect to usb)

bootloop htc one after installing rom

hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Can you enter fastboot or recovery?
LarsRosenberg said:
hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Click to expand...
Click to collapse
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Sindroid said:
Can you enter fastboot or recovery?
Click to expand...
Click to collapse
I can enger fastboot but my pc says there is an error 43.
I can't go to recovery because when I go there hè shows the screen of the recovery And than he just reboot itself.
moha_moha20106 said:
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Click to expand...
Click to collapse
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
LarsRosenberg said:
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
Click to expand...
Click to collapse
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
http://answers.microsoft.com/en-us/...cognised/6a2a5531-8b80-4798-9aa6-ee2dcb705c7f
http://pcsupport.about.com/od/errorc/a/code-43-error.htm
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
USB driver is still your key.
LarsRosenberg said:
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
harihacker said:
LarsRosenberg said:
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
LarsRosenberg said:
harihacker said:
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
moha_moha20106 said:
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
Click to expand...
Click to collapse
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
LarsRosenberg said:
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
Click to expand...
Click to collapse
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Thanks..
moha_moha20106 said:
LarsRosenberg said:
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
Thanks..:good:
Click to expand...
Click to collapse
moha_moha20106 said:
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Click to expand...
Click to collapse
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
LarsRosenberg said:
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
Click to expand...
Click to collapse
can you check FAQ #2 in this guide , read carefully, step by step
maybe same problem
Hey i have got a very similiar problem tried to load the new androidhd 62 kitkat on my the phone with the wrong custom recovery.
now i am stuck in bootscreen.
I can enter bootloader and fastboot. can´t enter cwm recovery fails everytime and restarts.
when i am in bootscreeen phone will be recognised but the big problem is when i am in fastboot the drivers seem not to work anymore so phone wont be recognised and can´t get anything going. I entered the device manager when i am in bootscreen the driver is working when in fastboot there is a ? at the driver and not really responding .
what can i do?

Categories

Resources