Hi Guys i upgrae my Touch pro 2 to win 6.5 but i dont like it at all
any one can tell me how can i flash or get back the original win 6.1
thanks
How about downloading the stock HTC rom on 6.1?
i tried to download the original rom from htc site but it is not available anymore
i want the telstra rom
not vodafone
sorry i didnt mention that before
so if u know from where i can get the telstra rom tell e pls
ty again
Please have a look around in the wiki section for shipped roms, you'll find a nice listing complete with download links.
http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium
Closing thread
Hey guys, where could I find the latest ROM version for HTC TouchPRO 2 (Rhodium 300) shipped from HTC? I have a Tilt2 from AT&T, is it posible to run this ROM in this phone?
Thanks in advance ...
There are threads on official ROMs here, as well as the "cooked" ROMs. Also check the Wiki, at http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium/Shipped_Roms
If you install HardSPL, then you can install other official GSM ROMs as well as those official ones specifically designed for your model/carrier/branding.
Original HTC TouchPRO2 ROM Sovled
Go to tHE OFFICAL htc WEBSITE AND DOWNLOAD THE OFFICAL ROM, YOU MAY NEED TO PROVIDE YOU IMEI NUMBER...
jiten2175 said:
Go to tHE OFFICAL htc WEBSITE AND DOWNLOAD THE OFFICAL ROM, YOU MAY NEED TO PROVIDE YOU IMEI NUMBER...
Click to expand...
Click to collapse
If he's got a Tilt2, then I don't think the official HTC site will let him download an official HTC ROM, because those are designed for HTC-branded phones.
you can download it here http://www.htc.com/sea/supportdownloadlist.aspx?p_id=250&act=sd&cat=all it will ask for your serial # to download.
There is a problem ...
The problem is that my phone serial number doesn't let me download the ROM, I'm not sure if it's possible to run a ROM from a HTC branded Rhodium 300 on a AT&T Tilt 2, even though they're the same device, and where can I download the ROM without a serial number, because I've been reading the Wiki and there is no post for that device (RHOD300).
Thanks you guys for your answers.
rimwrecker said:
The problem is that my phone serial number doesn't let me download the ROM, I'm not sure if it's possible to run a ROM from a HTC branded Rhodium 300 on a AT&T Tilt 2, even though they're the same device, and where can I download the ROM without a serial number, because I've been reading the Wiki and there is no post for that device (RHOD300).
Click to expand...
Click to collapse
If you have HardSPL, then *any* official *GSM* ROM will work on your device (though you may need to install a cab to map the keyboard). So RHOD100/200/300 ROMs will all work on the Tilt 2. There are links to places to get official ROMs on this forum, try a search.
Did the RHOD100 ROM work for you?
I haven't tried ...
I've been around the Wiki but there's no RHOD300 ROM, and I don't want to try the RHOD100 one because is not the same device, time ago I had trouble doing that with my Kaiser, if anyone knows about a link to a RHOD300 ROM (HTC) it would be much appreciated.
I heard something about an update from Verizon for TouchPRO2 users, hopefully there's one from AT&T in his way ...
rimwrecker said:
I've been around the Wiki but there's no RHOD300 ROM, and I don't want to try the RHOD100 one because is not the same device, time ago I had trouble doing that with my Kaiser, if anyone knows about a link to a RHOD300 ROM (HTC) it would be much appreciated.
I heard something about an update from Verizon for TouchPRO2 users, hopefully there's one from AT&T in his way ...
Click to expand...
Click to collapse
Don't count on ATT doing any update. You can run any gsm rhodium rom as long as you have hard spl.
Check here: http://shipped-roms.com/shipped/Rhodium/
All the roms are on there.
Thanks!!!
That's what i'm talking about, i'm gonna give it a try ... thanks bro!!!
Question ...
What's the difference between ROM's with Rhodium S and Rhodium S2?
Thanks in advance ...
rimwrecker said:
Hey guys, where could I find the latest ROM version for HTC TouchPRO 2 (Rhodium 300) shipped from HTC? I have a Tilt2 from AT&T, is it posible to run this ROM in this phone?
Thanks in advance ...
Click to expand...
Click to collapse
Just to let you know (and anyone else who is interested), I flashed the RHOD100 ROM on my AT&T branded Tilt 2, and it works perfectly. You can download the ROM here: http://rapidshare.com/files/2924648...Radio_Rhodium_4.49.25.17_Signed_Ship.exe.html
It's the OEM unbranded Touch Pro 2 ROM, like I said, no problems what-so-ever with my Tilt 2, I've been using it for a good 2 days now. I wanted the exact same thing you did, and trust me, I'm happy with it! Good luck
hi
im in the same boat as you. do u need to install cab to re-map the at&t keyboard?
cheers
martin
kodoq said:
im in the same boat as you. do u need to install cab to re-map the at&t keyboard?
Click to expand...
Click to collapse
Yes, if you flash a generic HTC ROM, then you will need a cab to map your non-generic (i.e. AT&T) keyboard.
rimwrecker said:
What's the difference between ROM's with Rhodium S and Rhodium S2?
Thanks in advance ...
Click to expand...
Click to collapse
Rhodium - stock ROM with TF3D2.1
Rhodium S - stock ROM with Sense 2.1
Rhodium S2 - stock ROM with Sense 2.5
Another question ...
Jackos said:
Rhodium - stock ROM with TF3D2.1
Rhodium S - stock ROM with Sense 2.1
Rhodium S2 - stock ROM with Sense 2.5
Click to expand...
Click to collapse
In your opinion, between the three types of ROM, which one is more stable? Which one is better? I'm using the Sense 2.1 and it has a couple of bugs with the music tab, and some other that i don't remember right now, but i want to know what to use in order to avoid this little bugs.
To be honest, they all suck. But if you work on them with brain, all of them can be great. I suggest that you start with the Rhodium S.
Thanks for the advice ...
Yesterday I flashed the Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium_4.49.25.91 ROM on my phone and i'm lovin' it, it was a good choice, the new Sense 2.5 has some improvements that make the Tilt2 an awesome phone, that's what i think ...
sorry to dig up an old thread, I have a stock tilt 2 (at&t) that has not had the hard spl done to it and wanted to know if I use Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium_4.4 9.25.91 would I have to hardspl it or no because its an htc release?
I have a new HTC Touch Pro2 from sprint and I am trying to find a new ROM that has the animated wealther on the home screen can some one direct me on where to download the new rom from please.
Thanks Grell911
Yeah, sure, that's ROM DEVELOPING for sure
Replying
Well... I use the Energy ROM's they're awesome and there's a lot of ROM's to choose from. Here's the link - forum[.]xda-developers[.]com/showthread.php?t=562773
Cheers mate
Make sure you use a rom that is compatible. You are in the GSM forum. The World version (Sprint)--cdma/gsm is in: http://forum.xda-developers.com/forumdisplay.php?f=517
grell911 said:
I have a new HTC Touch Pro2 from sprint and I am trying to find a new ROM that has the animated wealther on the home screen can some one direct me on where to download the new rom from please.
Thanks Grell911
Click to expand...
Click to collapse
You need to find a CDMA ROM; this is a GSM forum. But what you want is Sense 2.5 or 2.1. NRG has a CDMA version.
Hi all,first i want to thank ALL xda developers for this great forum,
i lost my htc(hermes100) while installing a new rom and there was only one solution which was the jtag, so now, i want to be careful with my HTC jade touch 3g.
my question is HOW can i Now if the ROM that i want to install is supported with my SPL/RADIO ?
I'm using WM6.1 and i want to install WM6.5( this one )
My config:
JADE100 64
SPL-2.32 oliNex
Microp-Jade(LED) v5
hamzawi said:
Hi all,first i want to thank ALL xda developers for this great forum,
i lost my htc(hermes100) while installing a new rom and there was only one solution which was the jtag, so now, i want to be careful with my HTC jade touch 3g.
my question is HOW can i Now if the ROM that i want to install is supported with my SPL/RADIO ?
I'm using WM6.1 and i want to install WM6.5( this one )
My config:
JADE100 64
SPL-2.32 oliNex
Microp-Jade(LED) v5
Click to expand...
Click to collapse
hi
as per ur info i can see that u have done HSPL
so u can flash any cooked or stock rom u want and yes the one u have mentioned too but id say try this one it is more recent than the one u have given Link : http://forum.xda-developers.com/showthread.php?t=858412
and if u want to go back to the original rom look in the rom link base thread u have all req original stock rom links in the same thread or just got to shippedroms.com and u can find all original stock roms for all HTC phones
happy flashing
hi firends
im new in xda
i have a diamond2 with winmob6.5 and orginal rom and manila 2.1
i need some butty thems for my device
please help me
thx
Why dont you upgrade to latest official ROM, as ALL latest official Diamond2 ROM comes with newer OS Core and Manila 2.5 also it will install newer Radio ROM . So once you have the latest ROM you can try newer Manila Mods... or if you like you can also go for Custom ROMs too (AS Custom ROM will have Latest OS Core and Manila, and these will be newer than the Latest Official ROM Update ).
Cheers!!!
thanks
how i can upgrate my rom?
cyruse the great said:
thanks
how i can upgrate my rom?
Click to expand...
Click to collapse
If you need Official ROM you get from your regional HTC Site... for India Link Visit Here. You may select the country/region from top of the page.
If you need Cooked/Customized ROM (I will prefer this ) you can select one from the WiKi page. Try couple of ROM and see which one fits for you.
Cheers!!!