Related
Hi guys,
Current situation
I haven't been able to use my phone for a good day now and I been busy reading guides, trying out stuff for a bunch of hours now. I thought it was time to ask you guys. Currently this is the only thing I'm able to do:
When I boot normally its stuck on the black screen with Samsung Galaxy Note on it.
When I boot with volume down, a screen popups up if I'm sure than press volume up. After that I'm in ODIN mode (says so with red letters in the left top). Below that it says: PRODUCT NAME: GT-N7000 , CUSTOM BINARY DOWNLOAD: NO , CURRENT BINARY: SAMSUNG OFFICIAL.
In the middle of the screen below the Android guy it says: Downloading... Do not turn of target !! (I'm not really sure if its suposed to say downloading there, while its not downloading anything?)
What I did so far
I came from a gingerbread Rocket ROM and decided to try out the ICS Stunner rom. I downloaded the ROM and read the install discription. I pretty much went into CWM right away to install the zip (rom) from SD card. It did work and ofcourse everything was still there cause I didnt wipe anything. But I noticed that a bunch of things didn't work and a lot of programs where crashing. I assumed I must have missed a step so I decided to go with the 'Squeaky Clean' install, which was posted on the team-passion website.
This was the last time I was able to get into CWM and connect my phone true USB with my laptop. Because I did the following steps:
Reboot in to ClockworkMod Recovery.
Format the following:
- Wipe Data/Factory Reset
- Wipe Cache Partition
**Enter 'Mounts and Storage'**
- Format everything it will allow you to
**Go Back, enter 'Advanced'**
-Wipe Dalvik Cache
-Wipe Battery Stats
**Go Back to main menu, reboot system**
The next step on that list is: Remove your battery and boot up into 'Download Mode'. But the only mode I am getting into is the ODIN MODE where it already says 'Downloading...'. When I try to flash using ODIN, it isn't able to setup the connection. It does identify that the phone is connected because the ID:COM is yellow on 0:[COM3]. It didn't before, but after reading somewere that it might help to install Kies for the drivers it did.
Also tried "InitialCFRootFlasher" and "DooMLoRD_v4_ROOT-zergRush-busybox-su" but both arent able to establish the connection. Just like ODIN.
What I'd like to do
I'd prefer going with the ICS Stunner ROM, seeing thats how this all started. But currently I'd settle for anything working, because being phoneless for a day is pretty anoying hehe.
What do you guys suggest?
I really don't know how u understood the process. But just don't screw this. Go download any of the pre rooted odex rom -link in my signature - and flash it via odin.
Or any rootable rom from dr ketan's thread - link in my signature - and follow the steps mentioned there to the Dot slowly and calmly. Just get to GB and rooted. Then report here. Will tell u how to go to ics stunner after that.
BOOMED from my BOMBASTIC NOTE
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
h4y0 said:
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
Click to expand...
Click to collapse
Yup u need to be in that mode. The odin on your PC should show the Com port as yellow. If it doesnt then there is some drivers problem.
It is connected yeah, the com port is shown as yellow. After loading any rom in PDA, Phone or Bootloader and only checking auto reboot and f. reset time this is what happens:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And thats where its hanging, nothing on the phone screen is changing.
I don't remember the screen saying 'Downloading..' last time I flashed something. It's already saying that when I enter the screen, when its not downloading anything.
Apparently I'm not able to make edits yet here so heres another post after figuring out how to load these files:
It is connected yeah, the com port is shown as yellow. After loading the three files in ODIN under PDA, PHONE and CSC just like on the screenshot in your signature. And only checking 'Auto reboot' and 'F. Reset Time' the following happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
abhisahara said:
Just get to GB and rooted. Then report here.
Click to expand...
Click to collapse
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
h4y0 said:
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
Click to expand...
Click to collapse
Sorry was away so couldnt reply. The setup shown i xda should work perfectly. Anyways its good to know that you got all things settled. You can install the ICS Stunner (no touchwiz and no samsung apps) if you so want. Remember to backup your data as you will have to wipe data for going to ICS. From rooted GB install mobile odin then download the lp1 repack from my signature and after all that is done reboot to recovery clear caches and data and flash stunner (download the latest build by clicking Stunner in my signature) clear caches and data and reboot.
* Triangle away is required only when you flash lp1 through PC Odin.*
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
h4y0 said:
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
Click to expand...
Click to collapse
You are welcome. Glad it all worked for you. Hitting some thanks button will be good too LOL
i was going to flash the new 4.0.4 version of ics today so i went to use cwm on my hong kong 4.0.4 version ics to factory reset and it got stuck, so i pulled out the battery and when i turn it on its stuck at the samsung logo boot screen.
I try using odin to flash roms but they are all stuck at NAND WRITE.
i try using a pit file to repartition my samsung but its stuck at the connection part T.T
i had this similar problem before installing a custom kernel on a stock ics and i bricked my phone but i managed to fix it with a pit file and dr.ketan' s pre rooted gb rom then flashed a ics from there.
Now i cant even flash dr. ketan prerooted gb rom because its stuck at nand write please help T.T
NOW EVERY ROM I FLASH IS STUCK AT SETUP CONNECTION PART INCLUDING KERNELS EVERYTHING I CANT EVEN GO TO MY RECOVERY MENU T.T
Hey bud... Sorry to hear you've bricked your phone. Anyway have you tried, post# 12 (Courtesy of forest) on this link -> http://forum.xda-developers.com/showthread.php?t=1661590&page=2 ?
letters_to_cleo said:
Hey bud... Sorry to hear you've bricked your phone. Anyway have you tried, post# 12 (Courtesy of forest) on this link -> http://forum.xda-developers.com/showthread.php?t=1661590&page=2 ?
Click to expand...
Click to collapse
i am not able to flash that kernel its stuck at setup connection
if it stucks, just unplug the USB cable, then plug it back in, and ODIN would readily detect that.
If not still use a different USB port to plug it to.
letters_to_cleo said:
if it stucks, just unplug the USB cable, then plug it back in, and ODIN would readily detect that.
If not still use a different USB port to plug it to.
Click to expand...
Click to collapse
but sometimes it nand write stuck T.T
First find a steady USB signal in one of your USB ports.. Plug to that port (to clear the issue on stuck in setup connection), The problem in the stuck connection you have is that Odin can't find a strong usb signal to send to, to your phone. Try using a different usb port (not a usb hub if your using one), then follow the previous post on top -#2 link.
Worst case scenario on your issue would to be, to take your phone back to SSC and have them replace the mobo... Your phone just got hit by the brick bug bud
letters_to_cleo said:
if it stucks, just unplug the USB cable, then plug it back in, and ODIN would readily detect that.
If not still use a different USB port to plug it to.
Click to expand...
Click to collapse
i intalled the kernel and i came to a screen galaxy note with a yellow triangle is it from there i type in the commands? the guide tell me i will end up in recovery but im just at a screen with a yellow triangle? i cant even get to recovery
unionforce5 said:
i intalled the kernel and i came to a screen galaxy note with a yellow triangle is it from there i type in the commands? the guide tell me i will end up in recovery but im just at a screen with a yellow triangle? i cant even get to recovery
Click to expand...
Click to collapse
wait a minute..how did you install the kernel ? thru PC Odin? Where you able to boot your phone in download mode? (not the recovery mode). If you are able to, Plug your phone to one of the USB ports on your computer and open back PC Odin. Follow the steps on the link I posted - #2 on top my post for you to bring back your Note in tiptop shape.
unionforce5 said:
i was going to flash the new 4.0.4 version of ics today so i went to use cwm on my hong kong 4.0.4 version ics to factory reset and it got stuck, so i pulled out the battery and when i turn it on its stuck at the samsung logo boot screen.
I try using odin to flash roms but they are all stuck at NAND WRITE.
i try using a pit file to repartition my samsung but its stuck at the connection part T.T
i had this similar problem before installing a custom kernel on a stock ics and i bricked my phone but i managed to fix it with a pit file and dr.ketan' s pre rooted gb rom then flashed a ics from there.
Now i cant even flash dr. ketan prerooted gb rom because its stuck at nand write please help T.T
NOW EVERY ROM I FLASH IS STUCK AT SETUP CONNECTION PART INCLUDING KERNELS EVERYTHING I CANT EVEN GO TO MY RECOVERY MENU T.T
Click to expand...
Click to collapse
wich kernel where you on?
Tapatalking on my N7000
letters_to_cleo said:
wait a minute..how did you install the kernel ? thru PC Odin? Where you able to boot your phone in download mode? (not the recovery mode). If you are able to, Plug your phone to one of the USB ports on your computer and open back PC Odin. Follow the steps on the link I posted - #2 on top my post for you to bring back your Note in tiptop shape.
Click to expand...
Click to collapse
the instruction told me to flash 4pdatar kernel to get into cwm to fix but i cannot get in cwm although i flashed the kernel already
msedek said:
wich kernel where you on?
Tapatalking on my N7000
Click to expand...
Click to collapse
i was on stock ics kernel hong kong version of the rom then i went flash cwm from stock recovery i tried factory reset on cwm and boom my phone broke.
can you post that link you were told to flash the kernel to? That link might be an outdated one already. Anyway the point now is how to revive your brick phone. In download mode, try to flash back to stock GB and again make sure your plug to one of the usb port on your PC and make sure 'Reset time' is tick in PC Odin. After you got the stock GB in place in the 'PDA' part, try to reflash the stock firmware again.
letters_to_cleo said:
can you post that link you were told to flash the kernel to? That link might be an outdated one already. Anyway the point now is how to revive your brick phone. In download mode, try to flash back to stock GB and again make sure your plug to one of the usb port on your PC and make sure 'Reset time' is tick in PC Odin. After you got the stock GB in place in the 'PDA' part, try to reflash the stock firmware again.
Click to expand...
Click to collapse
i flashed a india 2.3.5 stock gb rom and i plug to one of the usb on my pc f reset time is ticked and i put the gb rom in the pda and its stuck at factory fs. not at nand write which i encounter with other roms. I have a progress bar on my phone although its stuck at factory fs which is something new. the progress bar is really small i dont know what to do now
this is what odin says
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKL3_N7000ODDKL1_N7000DDKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> factoryfs.img
and also forest said this 2. Set up the tools:
- Use odin to flash attached kernel .tar file.
- Then restart the phone to recovery
- Then connect to computer using usb cable.
the thing is that it doesnt restart to recovery only samsung boot logo with a yellow triangle
wait actually i am able to get in cwm recovery can i download a custom rom and install via there to fix it?
unionforce5 said:
i flashed a india 2.3.5 stock gb rom and i plug to one of the usb on my pc f reset time is ticked and i put the gb rom in the pda and its stuck at factory fs. not at nand write which i encounter with other roms. I have a progress bar on my phone although its stuck at factory fs which is something new. the progress bar is really small i dont know what to do now
this is what odin says
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKL3_N7000ODDKL1_N7000DDKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> factoryfs.img
Click to expand...
Click to collapse
You got the superbrick bug... ....
and you have tried this tedious process already? ---> http://forum.xda-developers.com/showthread.php?t=1667886
letters_to_cleo said:
You got the superbrick bug... ....
and you have tried this tedious process already? ---> http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
i dont understand the whole post but can i backup with nandroid since i can get in cwm? but i dont have a nandroid backup is there a way i can downlaod one?
unionforce5 said:
i dont understand the whole post but can i backup with nandroid since i can get in cwm? but i dont have a nandroid backup is there a way i can downlaod one?
Click to expand...
Click to collapse
Is your phone rooted before? You can't make any nandroid backup if your phone is rooted. Now given if your phone still has root on it. What was the last kernel that your phone was using?
Please bear in mind, you need to really understand the instructions presented on that link I gave you. If it helps that you need to read it from the start of that thread down to the very end, then do so. It's the only alternative way I can advice you to revive your brick phone.
Now the other second option though would be (like I've said earlier), to send it back to Samsung.
Those are your only two options....
i used pit for repartition now when i boot it says firmware upgrade encountered an issue please select recovery mode in kies and try again but i cant seem to connect my phone with kies? it just say connecting.... stuck there..
You will most likely need a motherboard replacement... sorry
Sent from my GT-N7000 using xda premium
Well, I'm a complete noob, though I have a rooted ICS, I never tried to flash a ROM 'till now, but I really wanted to see JellyBean running on my phone.
What I did:
> Saw this thread http://forum.xda-developers.com/showthread.php?t=1953847
> Downloaded the ROM
> I read the first step as "make sure you are on a (rooted ICS-ROM) or (JB-ROM with CWM recovery and brickfree kernel installed)" and not "make sure you are on a [(rooted ICS-ROM) or (JB-ROM with CWM recovery)] and brickfree kernel installed"
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe. Obviously, I didn't see the brickbug warnings which even a 5 year old with one eye :cyclops: would have seen.
> So, just to be safe I flashed abyssKernel 4.2 from ODIN via Download Mode (Volume Down + power + home)
> Now I have the yellow triangle and raised flash counter
> Finally I tried to flash Stock ICS ROM from Dr Ketan's guide http://forum.xda-developers.com/showthread.php?t=1424997
Now this is what I see in the Odin3 v1.85 message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Help plz :| :crying:
clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).
dr.ketan said:
clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).
Click to expand...
Click to collapse
Actually, I'm not sure which kernel I had, I think I had either the default kernel or the AbyssKernel (I never used any other kernels)
I didn't flash the copied ROM
And yes, the device was in download mode while flashing stock ICS and ID:COM in odin turned yellow.
Do you remember how you had root ICS?
Anyway issue is not seems that, your device was not added
repeat procedure
Confirm you have installed Kies/Adb driver
Put device in download mode
connect device
ID com should turn yellow
select PDA for ROM file
Hit 'start' to flash
dr.ketan said:
Do you remember how you had root ICS?
Click to expand...
Click to collapse
I followed rootgalaxynote's guide for ICS
http () ://rootgalaxynote. () com/galaxy-note-root/how-to-root-ics-on-galaxy-note-gt-n7000-no-computer-required/
(Sorry I cant post links as I am a new user, so remove the brackets)
Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)
dr.ketan said:
Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)
Click to expand...
Click to collapse
Yes, I was in DDLR9
Also, I can't even get into download mode now, it says "Low battery! cant download!".
And it is plugged in to the computer for almost two hours now
switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery
dr.ketan said:
switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery
Click to expand...
Click to collapse
Currently its not going into download mode, willl try to get a charged battery and post the results as soon as I can. Thanks in advance.
Also, I get this
'charging_q1.jpg' draw failed
message.
No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium
dr.ketan said:
No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2
howard bamber said:
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
+1. DR. K, you are always there helping when some one in lost. I remember you said that you no longer own a G.NOTE, but instead a G.NOTE2, but you are so willing to help those whoever facing problem. You are a SAINT. big applause. thank you so much
Sent from my GT-N7000 using Tapatalk 2
I succesfully flashed PhilZ and then tried to flash the stock ICS ROM but it failed.
The Odin message box showed the following:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> zImage
<ID:0/013> NAND Write Start!!
<ID:0/013> modem.bin
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
May be remove the battery for a few seconds, reinsert and go download mode again and fladh
nokiamodeln91 said:
May be remove the battery for a few seconds, reinsert and go download mode again and fladh
Click to expand...
Click to collapse
Tried, no result, still says low battery cant download :/
I think I should go to the service center then.
either charge the battery on a diff note or try a full charged battery
Samsung service centre had to replace my motherboard. Now it's alright.
Hello All
I have a GT 7000 with stock 4.1.2 on it and it is only rooted.
It told me it had downloaded firmware update which i pressed install ( not knowing I shouldn't have because of my note being rooted) , and in doing so it is now just showing the little android dude with the blue thing in his tummy going round
Pressing volume up, home, power button won't do anything.
I can only get it into odin mode ( volume down, home, power button )
I am a complete noob and not sure what to do to get my note to work.
A friend said I need to flash a new rom via odin and I cant find a clear guide on how to do that.
For I can't afford to brick my note.
Please help
Kindest regards
pipsqueak 22 ooox
You have to have the samsung drivers installed for odin to work.
To get a stock rom google for sammobile. There are all official formwares (You will have to register).
After that extract that file, run odin and select the pda file (extracted md5 file).
Flash it. After reboot go to stock cwm and wipe data.
You should be fixed now.
Sent from note, a phone like never before
Odin is the way to go and the only way. Use this link http://forum.xda-developers.com/showthread.php?t=1901191 it will show how to flash Philz kernel on your phone and then you will have cwm. After that you will have to get a cwm flashable Rom out of the android dev section and put on your sd card, usb mass storage my work in philz kernel if so just put Rom on card and flash through cwm. Then phone will work or find a guide on pc Odin for flashing stock n7000 roms they are out there
Sent from my GT-N7000 using XDA Premium 4 mobile app
This just happened to me!!
Thanks jakuburban for your advice.
Though i didn't need to "After reboot go to stock cwm and wipe data." or maybe i do.
I just let it finish booting etc and everything was working fine,everything intact and okey dokey.
Can anyone say why this happened and what to do about updates in the future please?
Thanks again guys.:laugh:
Yeah, you sometimes don't need to wipe data. I told You to do this to be 100% sure it will work.
For the future, You can't use official update if You have root (normally it should give You information that You can't update the os because "Your device has been modified"), as You don't have original cwm and it won't boot into cwm to update Your os.
Sent from note, a phone like never before
Okey dokey.
Thanks again for the info.
Still having Trouble
Hi Guys,
Thanks heaps for your advice
I did what you said jakuburban but odin would get through seemmed like it was almost there then hung/froze
this is what was in the Odin txt box
"
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5120XXCMI1_N5120VNZCMH5_N5120XXCMG7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection.."
and just hung/froze at that point well over an hour.
and unpluged it - can still only get into odin mode
Not sure what to do?
Is this where I have to flash a hole new Rom?
Im not sure how to do this as I was looking at putting cyanogenMod rom on but I was reading some where not all rom's come in .tar forms
and I downloaded the latest stable rom from cyanogenMod but it is a . zip
so im not sure what to do there?
Thanks heaps
pipsqueak 22
Hanging at that place means there is some problem with the connection between note and pc. Make sure you have all the drivers installed and use original USB cable and main USB ports.
zip file roms need to be installed using clockwork mod recovery.
nokiamodeln91 said:
Hanging at that place means there is some problem with the connection between note and pc. Make sure you have all the drivers installed and use original USB cable and main USB ports.
zip file roms need to be installed using clockwork mod recovery.
Click to expand...
Click to collapse
yes I Used the origianl USB cable and have the latest Usb driver
turned off my firewall and antivirus softwared ( on work desktop)
then tryed on my laptop using kies USB driver - still no luck
ooo
Pipsqueak22 i've PM'd ya.
Yes you WILL be flashing a new ROM in Odin.
Make sure it's the right ROM you need.:good:
Raggerty64 said:
Pipsqueak22 i've PM'd ya.
Yes you WILL be flashing a new ROM in Odin.
Make sure it's the right ROM you need.:good:
Click to expand...
Click to collapse
Thanks ooo
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
andrew59it said:
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
Click to expand...
Click to collapse
so, what is your question actually??
Mate, I think the question is simple.
From what I understand in your comment, it seems you tried to install the Stock Rom 4.1.2 Italy, when you were the 4.0.4 / 4.0.3 Stock Rom Italy. On installation through ODIN pc you had a problem where it remains in the Samsung logo, will not let you enter the Recovery mode, only the Download mode. Is that so?
I should arrived that case do not leave any triangle would remove the battery, and after 10-15 seconds reintroduce it, and just then press buttons to enter the Recovery mode. If it fails, repeat the removal of the battery, but now when placed connect the DC charger to the phone I tried to turn normally to 20-25 seconds (just outside and away the logo of battery charging), and try to turn it on Recovery mode again, but we will keep down so long that should disappear all as to turn it off, and you press the keys for the Recovery mode, this time releasing anything else lighting appear on the screen, just a moment before letters GT-N7000, now if it really is accessible Recovery should apparate.
If you enter Recovery Mode Stock Samsung, you will have look out if a line appears below indicating the application, or wondering whether to apply the new CSC, we accept without thinking, since it must reaffirm the phone to initiate a Stock Rom.
Now if I come to this moment really was not accessible Recovery mode should get a screenshot of ODIN pc which finishes entering files to mobile, if it were really a fault, and do not leave do the installation, if you checked any box incorrectly, of which are not activated.
Other options include USB cable failure, USB port, lack of USB debugging enabled before starting the installation, do not put at least 10 minutes in the backlight time (this can try to fix running a finger across the screen every 23 seconds if it was 30 seconds off), but that the capture can determine ourselves if the error is only for ODN pc, which can be a failed in the installation and have not really finished the installation, in this case it would be almost insurance problem USB cable used, and in extremis or USB port.
fusionero said:
Mate, I think the question is simple.
From what I understand in your comment, it seems you tried to install the Stock Rom 4.1.2 Italy, when you were the 4.0.4 / 4.0.3 Stock Rom Italy. On installation through ODIN pc you had a problem where it remains in the Samsung logo, will not let you enter the Recovery mode, only the Download mode. Is that so?
I should arrived that case do not leave any triangle would remove the battery, and after 10-15 seconds reintroduce it, and just then press buttons to enter the Recovery mode. If it fails, repeat the removal of the battery, but now when placed connect the DC charger to the phone I tried to turn normally to 20-25 seconds (just outside and away the logo of battery charging), and try to turn it on Recovery mode again, but we will keep down so long that should disappear all as to turn it off, and you press the keys for the Recovery mode, this time releasing anything else lighting appear on the screen, just a moment before letters GT-N7000, now if it really is accessible Recovery should apparate.
If you enter Recovery Mode Stock Samsung, you will have look out if a line appears below indicating the application, or wondering whether to apply the new CSC, we accept without thinking, since it must reaffirm the phone to initiate a Stock Rom.
Now if I come to this moment really was not accessible Recovery mode should get a screenshot of ODIN pc which finishes entering files to mobile, if it were really a fault, and do not leave do the installation, if you checked any box incorrectly, of which are not activated.
Other options include USB cable failure, USB port, lack of USB debugging enabled before starting the installation, do not put at least 10 minutes in the backlight time (this can try to fix running a finger across the screen every 23 seconds if it was 30 seconds off), but that the capture can determine ourselves if the error is only for ODN pc, which can be a failed in the installation and have not really finished the installation, in this case it would be almost insurance problem USB cable used, and in extremis or USB port.
Click to expand...
Click to collapse
Thanks to reply.....
I was not really clear probably.
I tried to install 4.1.2 over 4.0.4 dedicate rom (3 H3G italian operator)
Odin always failed hanging or giving some fault
So I installed the ICS kernel (or rom) everything was fine. So I suppose the cable is ok , odin is ok etc....
But from the moment I downloaded the ICS, at reboot the phone hang on samsung logo with yellow triangle. ANd if I try to switch off the phone it restart and hang on logo.
Download mode is still working but recovery mode not.....
I'm looking for some kernel, rom, cwm to download, to recover the phone.....
The best thing to do is reinstall the ROM 4.1.2 (the 4.0.x are more dangerous if we wipes, JellyBean when they are not), but check that no error appears, if it appears only after installing the Rom rather fails during it, you can download the kernel Philz for you version, right now if you tell me the link to SamMobile I can tell you what, so you can tell which is correct, although it is not hard to tell if you look at the post of Philz above kernel with all links to them. After installation and download the kernel, you turn the phone into Recovery mode, you select mount usb (I think it came out well, but stresses) and connect your phone to your pc, you can pass the kernel to the internal SD and another copy to the SD external (remember to leave both copies at the root of both SD's). You MUST complete the transfer and disassemble with the option displayed on screen, and disconnect the USB cable. You continue by going to install zip, and should be able to select the Kenel Philz to install, after installing (if you get an error: Status 7 quiet, it was not the correct version of the kernel, and not actually installed), you will have to restart the mobile again, but when you start on with the letters GT-N7000, you will have to restart it by pressing Vol + - Power - Home, all at once, and keep it until the letters again, and keep it until it goes - restart, then you press the 3 keys, and when the letters appear, you must drop the 3 keys, and should you appear the menu Recovery kernel Phliz, there as you will see below something that says CSC implemented or instead ask if you want to apply, accept if you ask, and you should be able to restart the phone and wait about 5 minutes maximum to emit sound and vibration as it is booting at all, and then you should be able to start getting bills from Samsung and Google.
Thank fusionero
the problem is I'm not able to install the 4.1.2 , odin hang or fail
The ROM version I need is
sammobile.com/firmwares/download/22314/N7000XXLT9_N7000ITVLT3_ITV
So I think nex step is to install kernel Philz but I don't know which version I need. On the phone was installed 4.0.4 build IMM76D.XXLRL
CIAO
You must enter this http://www.sammobile.com/firmwares/download/22314/N7000XXLT9_N7000ITVLT3_ITV.zip/ address, and you must connect to you account to download that version you mention, I just check and this downloading smoothly on my pc . The problem is that it would open without ending .zip or you caught hours of server failure, just that i found this morning when downloading another who asked me.
As to what you mention about the version you have installed, as you are looking at the correct thread ( http://forum.xda-developers.com/showthread.php?t=1901191 ), the kernel you need for what you indicate ( 4.0.4 build IMM76D.XXLRL CIAO ) is this:
Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:
http://www.mediafire.com/?3ale6m9q6b6a3
Updated kernels list:
PhilZ-cwm6-BULR1-SWC-v3.99
PhilZ-cwm6-DDLR6-ODD-v3.99
PhilZ-cwm6-DDLR9-INU-v3.99
PhilZ-cwm6-DDLRB-ODD-v3.99
PhilZ-cwm6-DXLP9-OLB-v3.99
PhilZ-cwm6-DXLR2-OLB-v3.99
PhilZ-cwm6-DXLR5-OLB-v3.99
PhilZ-cwm6-JPLPD-OJP-v3.99
PhilZ-cwm6-JPLR8-OJP-v3.99
PhilZ-cwm6-UBLPC-UUB-v3.99
PhilZ-cwm6-UBLR3-PSN-v3.99
PhilZ-cwm6-UBLR5-TCE-v3.99
PhilZ-cwm6-XXLPY-XEN-v3.99
PhilZ-cwm6-XXLQ3-OXX-v3.99
PhilZ-cwm6-XXLRG-DBT-v3.99
PhilZ-cwm6-XXLRI-AUT-v3.99
PhilZ-cwm6-XXLRK-XEU-v3.99
PhilZ-cwm6-XXLRL-HUI-v3.99 - Is this your kernel
PhilZ-cwm6-XXLRQ-DBT-v3.99
PhilZ-cwm6-XXLRT-DBT-v3.99
PhilZ-cwm6-XXLRU-VDI-v3.99
PhilZ-cwm6-XXLRW-SFR-v3.99
PhilZ-cwm6-ZSLPF-OZS-v3.99
PhilZ-cwm6-ZSLPM-OZS-v3.99
PhilZ-cwm6-ZSLPN-OZS-v3.99
Click to expand...
Click to collapse
andrew59it said:
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
Click to expand...
Click to collapse
Your phone is not booting since you flashed an ICS kernel over a JellyBean ROM
Android ICS version : 4.0.4
Android JB version : 4.1.2
so I hope you understand the difference.
You are lucky you didn't brick your device or have you already
But since you are able to go in download mode I think its not bricked yet.
It was probably a bad download which failed the installation so download ROM again and this time verify that your download is not corrupt by running it via md5 if provided.
also please provide the link of the ROM thread that you are trying to install so that I can understand better
and if you are not looking to flash a custom ROM or rooting your device in order to do so then in that case the steps are pretty straight forward
download Stock ROM
extract ROM
open Odin
select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC
put phone in download mode and connect
the bar should turn yellow once connected.
once connected click on flash
bar should turn green if successful
REVENGE SOLVES EVERYTHING
tysonraylee said:
Your phone is not booting since you flashed an ICS kernel over a JellyBean ROM
Android ICS version : 4.0.4
Android JB version : 4.1.2
so I hope you understand the difference.
You are lucky you didn't brick your device or have you already
But since you are able to go in download mode I think its not bricked yet.
It was probably a bad download which failed the installation so download ROM again and this time verify that your download is not corrupt by running it via md5 if provided.
also please provide the link of the ROM thread that you are trying to install so that I can understand better
and if you are not looking to flash a custom ROM or rooting your device in order to do so then in that case the steps are pretty straight forward
download Stock ROM
extract ROM
open Odin
select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC
put phone in download mode and connect
the bar should turn yellow once connected.
once connected click on flash
bar should turn green if successful
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Thanks everyone....
I think you hit the problem..... but my original ROM version was 4.0.4 .... (H3G)
Anyway probably something went wrong.... I don't need a custom ROM or to root the device.
I need to install N7000XXLT9_N7000ITVLT3_ITV if possible but the flash doesn't start via ODIN
May you explain step by step what have I to do? I really appreciate....
What do you mean "select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC" ?
md5 is not a single file? I read something about more files to place in odin.....
@ fusionero: I already downloaded the files.... also PHILZ XXLRL but the device doesn't start anyway.....
andrew59it said:
Thanks everyone....
I think you hit the problem..... but my original ROM version was 4.0.4 .... (H3G)
Anyway probably something went wrong.... I don't need a custom ROM or to root the device.
I need to install N7000XXLT9_N7000ITVLT3_ITV if possible but the flash doesn't start via ODIN
May you explain step by step what have I to do? I really appreciate....
What do you mean "select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC" ?
md5 is not a single file? I read something about more files to place in odin.....
@ fusionero: I already downloaded the files.... also PHILZ XXLRL but the device doesn't start anyway.....
Click to expand...
Click to collapse
Did you download the XXLT9 ROM?? or the ROM that you want to flash ??
if so then it should be a zip file, if you extract that zip file you should have 3 files in it (sometimes only PDA file is present and the other two i.e Modem and CSC are not present, dont worry the PDA file alone is enough)
Open Odin, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7000XXDLJ5_N7000ODDDLI7_INU.tar.md5 Select the one that looks similar to the ROM you downloaded)
and if there are CSC and Modem files then select them by clicking Phone and CSC in Odin accordingly. It will be mentioned in the file name if its a Modem or CSC file
if MODEM_XXXX.tar.md5 then select that file by clicking the PHONE in Odin and if XXXX_CSC_XX.tar.md5 then select it by clicking CSC in Odin
remember that you lose all your data
Then just click flash and it should flash
md5 is a single file and is used to check the integrity of the file you downloaded. Its just used to make sure that the file you downloaded doesnt have any errors or is corrupt. you use the .md5 file and compare it with the md5 of the ROM.zip If it matches then its not corrupted or is a bad download. (.tar.md5 and .md5 are different files as in .tar.md5 is a firmware file and .md5 is a hash file used for integrity check)
Just right-click the rar/zip file and select properties and select the "file hashes" tab and if you downloaded a .md5 open that file by clicking "compare file" in the same tab
.md5 is always provided along with file you downloaded and its size is always in kbs , if its not provided then you cant do the hash check
If you dont have "file hashes" tab after right-clicking and selecting properties of the rar/zip file then you should download and install HashTab to get that option
follow this video for a better understanding https://www.youtube.com/watch?v=Ulz-1UYzHBA
the process is same but you should use your ROM files i.e Italian N7000 files to flash your phone and yes Odin version doesnt matter, you can use any version
Hello
I downloaded N7000XXLT9_N7000ITVLT3_ITV.ZIP
Extracted the file into a folder and had N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 (there is also SS_DL.dll)
Tried to flash the md5 file with odin (V.1.85) , but odin returns a fail.....
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
andrew59it said:
Hello
I downloaded N7000XXLT9_N7000ITVLT3_ITV.ZIP
Extracted the file into a folder and had N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 (there is also SS_DL.dll)
Tried to flash the md5 file with odin (V.1.85) , but odin returns a fail.....
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
did you follow the video??
did you select N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 by clicking PDA??
REVENGE SOLVES EVERYTHING
Yes of course.....
andrew59it said:
Yes of course.....
Click to expand...
Click to collapse
still odin fails?? even after following the video??
are you using the original cable to flash ??
try plugging the cable into a different usb port and flash
Yes it fails
I will try with another cable and port. But if I flash Philz rom it works.....
andrew59it said:
Yes it fails
I will try with another cable and port. But if I flash Philz rom it works.....
Click to expand...
Click to collapse
after trying that try the solution from this post http://forum.xda-developers.com/showthread.php?p=41844601#post41844601
and also try and follow the thread as people have posted different solutions regarding your problem
Also this would be the extent of help i can provide
if that doesnt work i dont know what will
So please forgive me for not being able to help any further :angel:
maybe you should use odin3 v3.04 or v3.09.
usually i use odin3 v1.8X for multiple file roms but in your case, you have only One-file rom.
---------- Post added at 01:12 PM ---------- Previous post was at 01:09 PM ----------
besides, extract all the files in odin archive and place them in one folder dont just start the odin .exe file directly from the archive.
Hello changed the cable the port and ODIN (ver 3.04)
The same problem..... look at the picture attached....
I'm loosing hope.....:crying:
Thanks to all....
solved the problem!!! WOW! :good::victory:
The solution was to change pc, I went on my girlfriend laptop and everything went smooth as silk.....
Thank you all to supporting me !!
andrew59it said:
Thanks to all....
solved the problem!!! WOW! :good::victory:
The solution was to change pc, I went on my girlfriend laptop and everything went smooth as silk.....
Thank you all to supporting me !!
Click to expand...
Click to collapse
congrats
REVENGE SOLVES EVERYTHING