Database Develop

[Q] charging problem

Hi all...need some help here..when i connect original charger to my phone,it say charging but the battery percentage still same and sometime drop while charging.i left my phone around 2 hour but nothing change. I already cleaning microusb port..disassemble my phone to check the connector..but everything fine..already change rom...full wipe...but still same..need u guys to help me.thanks

i faced the same problem ...replace your usb port ...i got one for 10$ ...in ebay

Dheemanth10 said:
i faced the same problem ...replace your usb port ...i got one for 10$ ...in ebay
Click to expand...
Click to collapse
Thanks....is it possible if battery problem...? Because im using same battery for 1 1/2 years...

ayieo7 said:
Thanks....is it possible if battery problem...? Because im using same battery for 1 1/2 years...
Click to expand...
Click to collapse
Check on about phone/status if it says charging via usb, your usb port is damage and needs to be change, I have one and that was the problem with it
Sent from my unbranded Razr HD =)

christian5916 said:
Check on about phone/status if it says charging via usb, your usb port is damage and needs to be change, I have one and that was the problem with it
Sent from my unbranded Razr HD =)
Click to expand...
Click to collapse
yess..it says charging via usb...sometimes via AC..but even it says via AC, the battery percentage still same/drop.

ayieo7 said:
yess..it says charging via usb...sometimes via AC..but even it says via AC, the battery percentage still same/drop.
Click to expand...
Click to collapse
Yep it must be the usb, sometime I had a message that said my phone was using more power than what the charger provided and that I needed to turn off the phone or stop the running applications.........and wasn't using it at all lol
I went and get one from eBay in less than $7
Sent from my unbranded Razr HD =)

Could that be possible??= =consume power even though its connected to the charger....
Sent from my HTC Incredible S using xda premium

sacralize said:
Could that be possible??= =consume power even though its connected to the charger....
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
Well I'm not sure with the Inc S, but I had a Galaxy S that when it was at 100% it would stop charging even with the charger plug in, Samsung said it's a feature to protect the device...........go figure LOL
Sent from my unbranded Razr HD =)

thanks for you advice guys..really appreciate that..

if its not connecting to usb also then its defiantly usb port prob ...i dont think its battery's fault ..

thanks guys...my IncS is back...manage to replace the port myself...you guys save my money alot coz before this i think to buy a new battery...big thanks again for all your advice...

Slow Charge In Notification Center

Hi, I recently bought the htc one international version.
I installed android revolution hd ROM and the elemantalx kernel.
While charging, I am having a notification stuck in status bar "Slow charging, to charge faster, use the original charge"
How can I resolve this issue ?
Thanks

try to use another charger and see if it disappears. maybe you need a new one. if it's not related to the charger, try to flash another rom and see if it's still there. don't know what else you could do..

Karim Kahale said:
Hi, I recently bought the htc one international version.
I installed android revolution hd ROM and the elemantalx kernel.
While charging, I am having a notification stuck in status bar "Slow charging, to charge faster, use the original charge"
How can I resolve this issue ?
Thanks
Click to expand...
Click to collapse
You're hooked up to a weak charger. You get that message when the phone can't draw all the current it needs.

I received the same message as the OP as i use my notebook to charge my One though i have only see it once.
John.

I'm having what sounds like the same problem. Plugging in the charger gives me a pop-up message, and then there's a permanent message in the notification area. Does anyone know exactly what is causing this? The charger I'm using is supposed to be able to deliver 2A: if the problem is that actually it can't even deliver 1A then I need to get it replaced; if it's the phone being stupid then it would be helpful to know why it's doing it.

iElvis said:
You're hooked up to a weak charger. You get that message when the phone can't draw all the current it needs.
Click to expand...
Click to collapse
Are you sure about that, or just guessing?

Shasarak said:
I'm having what sounds like the same problem. Plugging in the charger gives me a pop-up message, and then there's a permanent message in the notification area. Does anyone know exactly what is causing this? The charger I'm using is supposed to be able to deliver 2A: if the problem is that actually it can't even deliver 1A then I need to get it replaced; if it's the phone being stupid then it would be helpful to know why it's doing it.
Click to expand...
Click to collapse
i would stick to a 1A charger. it even says to on the back of the phone. you could cause extra loads on the charging units

IINexusII said:
i would stick to a 1A charger. it even says to on the back of the phone. you could cause extra loads on the charging units
Click to expand...
Click to collapse
Surely any modern smartphone limits the current that it draws to what it can use?
But actually I wasn't proposing to use it to charge my phone regularly, anyway, I just hooked it up as a test. What I actually want it for is charging an external battery which is capable of drawing a full 2A from a mains charger. If the reason I'm getting the message is because the charger can't deliver even 1A, then I need to know that!
It would also be handy to know what the cause is if I ever do buy an extra charger for the phone... so I can avoid running into the same problem then.

I like my gadgets, i have ordered one of these usb adapters, it show`s the amount of power your phone/device is pulling from the usb port/adapter it has 5 bars showing up to 5 watts or 1000ma.
They are $19 each + $5 for international posting.
http://www.kickstarter.com/projects/david-toledo/the-practical-meter-know-your-power
John.

HTC assumes the thing on the end of a USB cable can deliver 0.5A unless the data pins are shorted, then it assumes 1A.
I.e., if a charging device doesn't connect the data pins, the phone will only draw up to 0.5A.

I bought another usb adapter, that has the pins shorted inside, you just plug it into your usb adapter and then plug your normal usb cable into it, so you get maximum charge rate from any usb port.
http://www.mytrendyphone.co.uk/shop/samsung-p1000-galaxy-63928p.html
John.
BenPope said:
HTC assumes the thing on the end of a USB cable can deliver 0.5A unless the data pins are shorted, then it assumes 1A.
I.e., if a charging device doesn't connect the data pins, the phone will only draw up to 0.5A.
Click to expand...
Click to collapse

Tinderbox (UK) said:
I bought another usb adapter, that has the pins shorted inside, you just plug it into your usb adapter and then plug your normal usb cable into it, so you get maximum charge rate from any usb port.
http://www.mytrendyphone.co.uk/shop/samsung-p1000-galaxy-63928p.html
Click to expand...
Click to collapse
Is that a full-size USB connector, or micro-USB? Can't really see from the picture.

It`s full size, no other adapter needed.
John.
Shasarak said:
Is that a full-size USB connector, or micro-USB? Can't really see from the picture.
Click to expand...
Click to collapse

Tinderbox (UK) said:
It`s full size, no other adapter needed.
Click to expand...
Click to collapse
That won't help me with my present situation, as the charger has a hardwired micro-USB plug and nothing else.
Interesting for other situations, though.
If there were something similar that was micro-USB to micro-USB that might work.

Are you on 4.2.2? The problem has been solved with htc turning on qualcomm quick charge.
Sent from my HTC One using Tapatalk 2

prinzhernan said:
Are you on 4.2.2?
Click to expand...
Click to collapse
Yes.
prinzhernan said:
The problem has been solved with htc turning on qualcomm quick charge.
Click to expand...
Click to collapse
What problem, exactly?

prinzhernan said:
Are you on 4.2.2? The problem has been solved with htc turning on qualcomm quick charge.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Can you explain little further please?
Thanks in advance

It`s a pity you cannot enable/disable the qualcomm quick charge as i prefer a slow charge as fast charging produces more heat and is bad for the battery life as fitting a new battery is an return to htc job, I have heard it`s about a 1/3 faster?.
John.

Yeah it's much faster now after the 4.2.2 update. And also, before the update my phone used to charge in usb mode in both my apple chargers and my extra battery packs. Now, it charges on ac mode, thankfully. This leads me to believe that qualcomm quick charge is turned on because in their website one of the features of this is power source detection (it knows whether it's a usb source or ac).
Sent from my HTC One using Tapatalk 2

Shasarak said:
Are you sure about that, or just guessing?
Click to expand...
Click to collapse
It's per a support statement from HTC that I found the first time I got that warning:
http://forum.xda-developers.com/showpost.php?p=38754739&postcount=8
Apparently it's trying to activate quick charging, and if it can't, you get that notification.
Tinderbox (UK) said:
It`s a pity you cannot enable/disable the qualcomm quick charge as i prefer a slow charge as fast charging produces more heat and is bad for the battery life as fitting a new battery is an return to htc job, I have heard it`s about a 1/3 faster?.
Click to expand...
Click to collapse
"Fast charging" is simply charging at the AC rate via USB. It's no different than having it plugged into the wall.

Charging Problem

Guys, having a problem with the battery port ( I think)
As soon as i plug the wall charger in to the port the phone shows that it is charging but it actually doesn't charge. This happens only with the wall charger.
Tried Reflashing ROM and everything software related.
On Sweetrom v10.5 with Philz.
It works fine via USB charging ( From Computer).
I changed my charger too but same problem happens.
It started when i plugged the phone to a charger of Xolo Q1000 (3rd Party) and that too in a Made In China Extension Board. :/

Hi there
Its a problem with the charger not the USB cable.
Sent from my GT-I9300 using xda premium

_PR3DATOR_ said:
Hi there
Its a problem with the charger not the USB cable.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But i tried with the other charger too of my sisters Note. ;/
Didnt worked.

LeviathanAP said:
But i tried with the other charger too of my sisters Note. ;/
Didnt worked.
Click to expand...
Click to collapse
You might have a bad USB port on your phone,
If you do then this goes to show don't use 3rd party chargers and extensions, you could have shorted it out.
Best thing to do I would think is to try and get a replacement charging module.

twisted64d said:
You might have a bad USB port on your phone,
If you do then this goes to show don't use 3rd party chargers and extensions, you could have shorted it out.
Best thing to do I would think is to try and get a replacement charging module.
Click to expand...
Click to collapse
Is that possible?
:/
I mean could have probably shorted out the port?
If it is shorted then how does it charge with the USB?
:/
And btw I can use the Phone as a media or storage device too and can acess all files and everything.

LeviathanAP said:
Is that possible?
:/
I mean could have probably shorted out the port?
If it is shorted then how does it charge with the USB?
:/
And btw I can use the Phone as a media or storage device too and can acess all files and everything.
Click to expand...
Click to collapse
Have you tried flashing any other ROMs to make sure it's not a bug?
Some roms can be pretty weird with a few bugs but I'd say it's worth a shot.

twisted64d said:
Have you tried flashing any other ROMs to make sure it's not a bug?
Some roms can be pretty weird with a few bugs but I'd say it's worth a shot.
Click to expand...
Click to collapse
Yes, I tried Superbean ROM XXLT6.
which was working great earlier.
but the problem still persists.
:/
I am gonna visit Samsung Care Centre tomorrow as i dont know anything about DIY stuff.

if other usb cable also same , then it must be usb port that damaged.

Help!!!!!! My note n7000 is writting battery Disconnected!!!!!

pls i recently shipped dis phone down to my side but after using it for few weeks it started writting battery disconnected

Somebody should help me
i urgently need a solution to my note n7000 saying battery disconnected whenever I plug in my charger.

ladokuntunji said:
i urgently need a solution to my note n7000 saying battery disconnected whenever I plug in my charger.
Click to expand...
Click to collapse
Try cleaning the USB port

XxPixX said:
Try cleaning the USB port
Click to expand...
Click to collapse
have done that but stil gives the same error

ladokuntunji said:
have done that but stil gives the same error
Click to expand...
Click to collapse
Try a new charger.

ladokuntunji said:
pls i recently shipped dis phone down to my side but after using it for few weeks it started writting battery disconnected
Click to expand...
Click to collapse
may be your battery is damage.

pods71 said:
may be your battery is damage.
Click to expand...
Click to collapse
pls i change the battery and still having the same problem..
someone should help me on this matter...
the phone has been a paper bag since den

Nobody here can help you, get it to a repair shop and the guys there will know what to do. It's a hardware issue apparently, and a Samsung service center should be able to fix it.
Sent from my GT-N7000 using xda app-developers app

ladokuntunji said:
pls i recently shipped dis phone down to my side but after using it for few weeks it started writting battery disconnected
Click to expand...
Click to collapse
Are you root and have you got a custom recovery installed?
If you are you might want to drain your battery, then charge it fully; to remove your battery stats (in CWM). That might help.
If its just your charger not charging your phone, that might indicate that youre charger isnt working, have you got another usb cable? try charging it while its connected to the pc to make sure the AC adapter itsself isnt broken.
Cheers.

Charging issues with Cyanogen 10.1.3

Hi there, im posting this thread because i had/im having issues while charging through wall plug my Galaxy S. It says its charging but it wont charge really as the percentage will never go up. If I charge the cell through usb from computer things go fine and it charges normally.
I've purchased a brand new charger to see if the old one was the guilty for that issue but the brand new is not working either.
Any of the battery supplies doesn't work either so i figured out that the issue came from software so I upgraded my Cyanogen to the most recent stable version and well, at the first charge through the wall plug was fine but after that isnt working again.
So I'm asking you guys if there's a solution for my issue, i'm really desperated with this problem. I can't travell if my cell doesnt charge through wall plugs.
Thank you.

Hi,
i`ve posted your thread in the development thread of CM 10.1.3 ...maybe more people have a idea what it could be !
http://forum.xda-developers.com/showthread.php?p=46909936#post46909936
malka11 said:
Hi there, im posting this thread because i had/im having issues while charging through wall plug my Galaxy S. It says its charging but it wont charge really as the percentage will never go up. If I charge the cell through usb from computer things go fine and it charges normally.
I've purchased a brand new charger to see if the old one was the guilty for that issue but the brand new is not working either.
Any of the battery supplies doesn't work either so i figured out that the issue came from software so I upgraded my Cyanogen to the most recent stable version and well, at the first charge through the wall plug was fine but after that isnt working again.
So I'm asking you guys if there's a solution for my issue, i'm really desperated with this problem. I can't travell if my cell doesnt charge through wall plugs.
Thank you.
Click to expand...
Click to collapse

malka11 said:
So I'm asking you guys if there's a solution for my issue, .
Click to expand...
Click to collapse
first check USB slot for misaligned pins, looseness and dirt. Follow this guide
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
first check USB slot for misaligned pins, looseness and dirt. Follow this guide
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
I've checked it and its not a hardware issue. This issue started to happen when i installed a stable version of Cyanogen and data connection through USB works fine when im transfering movies and pics through the usb connection. Problem is while charging with every wall charger i have for Galaxy.

Maybe make a backup of your device...with CWM-Recovery and t est with another ROM or newer ROM, like CM 10.2 ...only as a test
malka11 said:
I've checked it and its not a hardware issue. This issue started to happen when i installed a stable version of Cyanogen and data connection through USB works fine when im transfering movies and pics through the usb connection. Problem is while charging with every wall charger i have for Galaxy.
Click to expand...
Click to collapse

freakymod2120 said:
Maybe make a backup of your device...with CWM-Recovery and t est with another ROM or newer ROM, like CM 10.2 ...only as a test
Click to expand...
Click to collapse
I had the same issues witg 10.2 thats why I upgraded to 10.3 but with the same result

but your charger is okay???
Which steps did you before flashing cm 10.2???
malka11 said:
I had the same issues witg 10.2 thats why I upgraded to 10.3 but with the same result
Click to expand...
Click to collapse

freakymod2120 said:
but your charger is okay???
Which steps did you before flashing cm 10.2???
Click to expand...
Click to collapse
I bought recently a samsung charger recently.
Before having 10.2 i was with experimental versions of Cyanogen but mobile didnt work properly so i did full wipe of data/cache/dalvik and installed the custom firmware (Gingerbread) and then i upgraded it to Cyanogen doing the right steps as detailed in this forum.

It is really strange, that it worked over usb ,but not with a wall plugged-in charger ...
But i don`t think that it is a software-problem ...
Do you have any news actually?
malka11 said:
I bought recently a samsung charger recently.
Before having 10.2 i was with experimental versions of Cyanogen but mobile didnt work properly so i did full wipe of data/cache/dalvik and installed the custom firmware (Gingerbread) and then i upgraded it to Cyanogen doing the right steps as detailed in this forum.
Click to expand...
Click to collapse

freakymod2120 said:
It is really strange, that it worked over usb ,but not with a wall plugged-in charger ...
But i don`t think that it is a software-problem ...
Do you have any news actually?
Click to expand...
Click to collapse
Ive the same issue im on 10.1.3 RC2, but it was fine for a good while and only in the last week this had occurred.

malka11 said:
Hi there, im posting this thread because i had/im having issues while charging through wall plug my Galaxy S. It says its charging but it wont charge really as the percentage will never go up. If I charge the cell through usb from computer things go fine and it charges normally.
I've purchased a brand new charger to see if the old one was the guilty for that issue but the brand new is not working either.
Any of the battery supplies doesn't work either so i figured out that the issue came from software so I upgraded my Cyanogen to the most recent stable version and well, at the first charge through the wall plug was fine but after that isnt working again.
So I'm asking you guys if there's a solution for my issue, i'm really desperated with this problem. I can't travell if my cell doesnt charge through wall plugs.
Thank you.
Click to expand...
Click to collapse
It may be problem with current output of charger. Check whether your charger is giving 700mA (0.7A) output.
Find the output marked on the sticker (or on body) on the charger whether it is written 700mA or less.
If it is 700mA, then output is equivalent to the original charger. If it is 550mA, then it's just OK. And if it is less than 550mA, it is of no use for Galaxy S.

Rohitdahiya said:
It may be problem with current output of charger. Check whether your charger is giving 700mA (0.7A) output.
Find the output marked on the sticker (or on body) on the charger whether it is written 700mA or less.
If it is 700mA, then output is equivalent to the original charger. If it is 550mA, then it's just OK. And if it is less than 550mA, it is of no use for Galaxy S.
Click to expand...
Click to collapse
Hi, I've just checked the charger outputs and they are between that range. One is 0.7A and the other one is 550mA. Thing is that with the 550mA one it only charges when i plug the connector to the phone in the same particular position, if not it's not charging. The 0.7A one is not charging at all but is the one which charged the phone without problem some days ago.
I'm ordering an additional one to confirm my suspects, ill keep u noticed, thanks for all the help!

malka11 said:
Hi, I've just checked the charger outputs and they are between that range. One is 0.7A and the other one is 550mA. Thing is that with the 550mA one it only charges when i plug the connector to the phone in the same particular position, if not it's not charging. The 0.7A one is not charging at all but is the one which charged the phone without problem some days ago.
I'm ordering an additional one to confirm my suspects, ill keep u noticed, thanks for all the help!
Click to expand...
Click to collapse
Instead of buying the new charger, You may buy the charging pin as shown in the pic given in the link. It will cost you just around 2% of the cost of the original charger.
www.telecomb2b.com/uploadedimages/3023Connector-pin.jpg
Separate both the parts (mobile end) on the charging pin and also on the old charger. Now exchange the end parts of both (charger and charging pin)
and enjoy refreshed charger
* instead is writing thanks, press the thanks button as it matters a lot to me (only if you feel I helped you )

Hmhh it is really strange...hope with new charger or pin it works ...:good:
malka11 said:
Hi, I've just checked the charger outputs and they are between that range. One is 0.7A and the other one is 550mA. Thing is that with the 550mA one it only charges when i plug the connector to the phone in the same particular position, if not it's not charging. The 0.7A one is not charging at all but is the one which charged the phone without problem some days ago.
I'm ordering an additional one to confirm my suspects, ill keep u noticed, thanks for all the help!
Click to expand...
Click to collapse

freakymod2120 said:
Hmhh it is really strange...hope with new charger or pin it works ...:good:
Click to expand...
Click to collapse
it worked! I've tested it few days and its working perfectly
Dunno whats wrong with the new one i purchased before this one, but its not working at all.
Before asking to close this topic i'd like to know which are the pros and cons of the fast charge mode i have in mackay kernel, thx!

Hey great, nice to hear :good: thanks for the news...
fast charge menas that the highest power of your charger or over usb will be activated for charging your battery faster...i had this option with semaphore, too, but i never used it ...
malka11 said:
it worked! I've tested it few days and its working perfectly
Dunno whats wrong with the new one i purchased before this one, but its not working at all.
Before asking to close this topic i'd like to know which are the pros and cons of the fast charge mode i have in mackay kernel, thx!
Click to expand...
Click to collapse

freakymod2120 said:
Hey great, nice to hear :good: thanks for the news...
fast charge menas that the highest power of your charger or over usb will be activated for charging your battery faster...i had this option with semaphore, too, but i never used it ...
Click to expand...
Click to collapse
malka11 said:
it worked! I've tested it few days and its working perfectly
Dunno whats wrong with the new one i purchased before this one, but its not working at all.
Before asking to close this topic i'd like to know which are the pros and cons of the fast charge mode i have in mackay kernel, thx!
Click to expand...
Click to collapse
Fast charge mode has nothing to do with Ac charging. When connected to USB, our phone allow limited power to go for charging. (As you can see, it takes around 6 hours to charge via USB.)
This mode removes this limit and speed up charging.
Sent from my GT-I9000 using XDA Premium 4 mobile app

Ah okay i don`t that this function is only user when charging via USB, but good to know ...thanks for the info ...:good:
Rohitdahiya said:
Fast charge mode has nothing to do with Ac charging. When connected to USB, our phone allow limited power to go for charging. (As you can see, it takes around 6 hours to charge via USB.)
This mode removes this limit and speed up charging.
Sent from my GT-I9000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse