Database Develop

[Q] Help plz , No reception after flashing [ROM][4.0.4][AOSP][IMM76D] ICS333 RC1.1

Well i just flashed [ROM][4.0.4][AOSP][IMM76D] ICS333 RC1.1 minutes ago , everything seems to work fine but i get no reception and when i try to search for mobiles networks it gives me an error " an error occurred while searching for networks " something like that
before i flashed i had Stock GB 2.3.6 Value Pack Rooted
Plz help me

zizou_1991 said:
Well i just flashed [ROM][4.0.4][AOSP][IMM76D] ICS333 RC1.1 minutes ago , everything seems to work fine but i get no reception and when i try to search for mobiles networks it gives me an error " an error occurred while searching for networks " something like that
before i flashed i had Stock GB 2.3.6 Value Pack Rooted
Plz help me
Click to expand...
Click to collapse
Go to Silkys thread and get cm9 modem
http://forum.xda-developers.com/showthread.php?p=15446012
[CM7/MIUI] Modems
Sent from my GT-I9000 using xda premium

Well i'm from Algeria and i'm using the rom now , i can't seem to find the right Modem for my phone , can u plz show me which one to use ?
And also , there was another problem , when the phone is left without being touched and goes to standby mod it freezes then reboots !

Did you try reinstalling the ROM?
It could be the modem like Slaphead said.
Also could be that your IMEI number got scrambled. I know some ICS roms had problems with this. Try the search function there are bound to be some threads about this!
Good luck!

Try to reboot and see if it solves the prob.it usually does.
Or shut the phone off and pull battery for a 30 sec and boot up

Rebooted and took the battery off and did every thing i know to fix it but nothing seems to work, though i didn't flash an ICS Modem .. i just flashed the rom and Gaps as said in the tutorial. i also backed-up my /efs folder.
Note : After Going back to Stock GB 2.3.6 Value Pack the signal is back full and everything works well..

have you tried reverting back to the firmware you were using earlier?

emclondon said:
have you tried reverting back to the firmware you were using earlier?
Click to expand...
Click to collapse
Note : After Going back to Stock GB 2.3.6 Value Pack the signal is back full and everything works well..
Click to expand...
Click to collapse

No Sim Detected LG Optimus 2x :(

Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.

I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app

asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?

cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app

You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.

Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.

Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!

Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app

IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.

I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.

Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!

[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.

please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou

interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.

hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .

INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!

Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.

Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet

Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.

Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.

singal probleme help me please

Hi to all,
I have a i9070 market it properly and then I was not a sign of bars instead of network I'm not sure where the problem
my imei is correct and the base band also please help me

nagui said:
Hi to all,
I have a i9070 market it properly and then I was not a sign of bars instead of network I'm not sure where the problem
my imei is correct and the base band also please help me
Click to expand...
Click to collapse
When this happend? What was you doing in that time? You updated from GB to JB? Do FACTORY RESET.
Послато са GT-I9070 користећи Тапаток 2

I am currently on 4.1.2 JB and I was in version 2.3.6 I did the donwgarde but its always gives nothing I banned the logo in place of the network
I do not understand or can come of this.

shut_down said:
When this happend? What was you doing in that time? You updated from GB to JB? Do FACTORY RESET.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
I am currently on 4.1.2 JB and I was in version 2.3.6 I did the donwgarde but its always gives nothing I banned the logo in place of the network
I do not understand or can come of this.

nagui said:
I am currently on 4.1.2 JB and I was in version 2.3.6 I did the donwgarde but its always gives nothing I banned the logo in place of the network
I do not understand or can come of this.
Click to expand...
Click to collapse
Do factory reset from recovery. Lot of people had that problem, and it solved.
Послато са GT-I9070 користећи Тапаток 2

shut_down said:
Do factory reset from recovery. Lot of people had that problem, and it solved.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
the factory reset from recovery does not help me I met him several times and I always have this logo prohibited.
there are no solution for its?

nagui said:
the factory reset from recovery does not help me I met him several times and I always have this logo prohibited.
there are no solution for its?
Click to expand...
Click to collapse
Lets clear. You had 2.3.6, than you instaled 4.1.2? And problem was there from the begining of use 4.1.2 or you had signal on 4.1.2 and it suddanly dissapear?
Try to reflash firmware, but do not use the one you have - download it again. Do factory reset, clear cache and see if it solves. If not maybe that is some hardware problem.

shut_down said:
Lets clear. You had 2.3.6, than you instaled 4.1.2? And problem was there from the begining of use 4.1.2 or you had signal on 4.1.2 and it suddanly dissapear?
Try to reflash firmware, but do not use the one you have - download it again. Do factory reset, clear cache and see if it solves. If not maybe that is some hardware problem.
Click to expand...
Click to collapse
here is the problem appeared with version 2.3.6 it was normal then one day I find this logo banned therefore I flash with version 4.2.1 and nothing changed.
I did re-flash with a different orginal version 2.3.6 that I installed before and see what it gives as you told me.
Otherwise just a question when I am version 2.3.6 or 4.2.1 when I plug the usb cable it makes me MTP connection or MTU esque top is this normal?

nagui said:
here is the problem appeared with version 2.3.6 it was normal then one day I find this logo banned therefore I flash with version 4.2.1 and nothing changed.
I did re-flash with a different orginal version 2.3.6 that I installed before and see what it gives as you told me.
Otherwise just a question when I am version 2.3.6 or 4.2.1 when I plug the usb cable it makes me MTP connection or MTU esque top is this normal?
Click to expand...
Click to collapse
That is normal, on JB you can choose between connections.
Is your phone locked to network provider? That you can only use its sim cards?

shut_down said:
That is normal, on JB you can choose between connections.
Is your phone locked to network provider? That you can only use its sim cards?
Click to expand...
Click to collapse
No, the phone is unlocked
when I do * # 7465625 # everything is off
otherwise you can given me a clean Orginal Version 2.3.6 no change I downolad and I test

I find this link http://forum.xda-developers.com/showthread.php?t=2195673
Downgrade to the JB 4.1.2 to 2.3.6 GB
I'll do it and I will tell you if there are new
thank you for your help my friend

nagui said:
I find this link http://forum.xda-developers.com/showthread.php?t=2195673
Downgrade to the JB 4.1.2 to 2.3.6 GB
I'll do it and I will tell you if there are new
thank you for your help my friend
Click to expand...
Click to collapse
Do you have I9070 or I9070P? DO NOT USE NON P FIRMWARE ON P AND P ON NON P. It will brick your phone.

shut_down said:
Do you have I9070 or I9070P? DO NOT USE NON P FIRMWARE ON P AND P ON NON P. It will brick your phone.
Click to expand...
Click to collapse
i have i9070 i use fimware for i9070 not for i9070P

nagui said:
here is the problem appeared with version 2.3.6 it was normal then one day I find this logo banned therefore I flash with version 4.2.1 and nothing changed.
I did re-flash with a different orginal version 2.3.6 that I installed before and see what it gives as you told me.
Otherwise just a question when I am version 2.3.6 or 4.2.1 when I plug the usb cable it makes me MTP connection or MTU esque top is this normal?
Click to expand...
Click to collapse
So you are from 2.3.6 then you flashed 4.1.2 then you just flashed 2.3.6 back? You should follow the downgrade steps, you can't just flash it like you flash 4.1.2.
Correct me if I'm wrong or misunderstand anything.
Sent from my GT-I9070 using xda app-developers app

arffrhn said:
So you are from 2.3.6 then you flashed 4.1.2 then you just flashed 2.3.6 back? You should follow the downgrade steps, you can't just flash it like you flash 4.1.2.
Correct me if I'm wrong or misunderstand anything.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I was a version 2.3.6 and I had this problem not a logo instead of the network, I flashed 4.2.1 with its given the same problem there.
otherwise I'll ressayé to the downgarde and see her give anything because I did the downgard and be given nothing when I put the version 2.3.6 I did with odin 1.85 or 3.07 instead of

nagui said:
I was a version 2.3.6 and I had this problem not a logo instead of the network, I flashed 4.2.1 with its given the same problem there.
otherwise I'll ressayé to the downgarde and see her give anything because I did the downgard and be given nothing when I put the version 2.3.6 I did with odin 1.85 or 3.07 instead of
Click to expand...
Click to collapse
Try with other SIM card. Maybe it is problem with it.

shut_down said:
Try with other SIM card. Maybe it is problem with it.
Click to expand...
Click to collapse
Hello, here I made donwgarde 4.2.1 to 2.3.6 and I change sim card and I still have the same problem not the logo in place of network does not change
I understand what to do and what needs to change something in the phone?

nagui said:
Hello, here I made donwgarde 4.2.1 to 2.3.6 and I change sim card and I still have the same problem not the logo in place of network does not change
I understand what to do and what needs to change something in the phone?
Click to expand...
Click to collapse
Did you try another sim card, maybe yours is defected.

shut_down said:
Did you try another sim card, maybe yours is defected.
Click to expand...
Click to collapse
mine it works on another phone without a problem and I put another sim card still the same problem with the logo of a prohibited place the network
there are something has changed on the mother board or something like it

nagui said:
mine it works on another phone without a problem and I put another sim card still the same problem with the logo of a prohibited place the network
there are something has changed on the mother board or something like it
Click to expand...
Click to collapse
I do not know. Now you are unrooted? Check download mode if you have binary counter increased, if not then ok. And if you have warranty go to service center.

[Q] SIM Card not recognized

Galaxy S advance.
Rooted a while ago. Android 4.1.2
Baseband I9070XXLQ4
Today phone says 'no SIM'. I can't call, I can't be called. Only emergency calls.
SIM card works with other phones.
So it's software or hardware.
Help.

hardware.. seems like u got ur baseband.. so modem still working fine..
edit: if it happen after you root try flashing stock rom or kernel..

flash stock via Odin!
Sent from my GT-P1000 using Tapatalk 4

pawelarc said:
flash stock via Odin!
Sent from my GT-P1000 using Tapatalk 4
Click to expand...
Click to collapse
All the times I had this problem I've flashed stock ROM with Odin and I can confirm that it works. Seems that sometimes is a problem of SecPhone.apk

Thanks guys, but can you point in the right direction (with flashing the stock ROM)? Like, where do I find it and stuff...
(I don't know how I managed to root my phone without breaking it in the first place xD)

vici30 said:
Thanks guys, but can you point in the right direction (with flashing the stock ROM)? Like, where do I find it and stuff...
(I don't know how I managed to root my phone without breaking it in the first place xD)
Click to expand...
Click to collapse
I've writed how to reflash stock firmware in this thread, you can follow up to the sixth step, and if you are interested also to root and CoCore kernel go up to tenth step (after this reboot device)
EDIT: You don't need "Re-Partition" option in Odin

No SIM card (but network OK 4 bars)
Hi,
I have a 9070P (NFC) simlocked to Orange France.
I've got the very same "no SIM card" issue after upgrading to JB via Odin (3.07) (tar downloaded from samfirmware).
Network is OK (4 bars), but "no SIM card". The SIM works fine in any other phone I have tested + inserting a SIM from a different operator does not trigger the "enter unlock code" popup at startup.
My IMEI is OK and has always been (*#06#).
Note : from the many posts I've read, it is *not* stored in /efs on this phone but could be stored in CSPSA partition.
Note : I've always flashed the *right* firmwares for I9070P (not I9070).
What I have tried so far :
* restock to GB with this tutorial : http://forum.xda-developers.com/showthread.php?t=2247604
--> No SIM card
* then flashed Orange's stock firmware with Odin from samfirmware
--> No SIM card
* played a bit lot with "secret code" *#197328640# menus. It happened once that I recovered the SIM card + data connexion then it failed again after next boot. So I'm pretty sure the pb *is* software.
It's a pitty I have backed up my "efs", and "CSPSA" partitions (http://forum.xda-developers.com/showthread.php?t=2145464) after the pb occured...
I have rooted the phone, dumped and tried to analyse modem/RIL logs, but did not manage to spot the pb...
I'm used to linux, flashing and so on but not that much of Android intricaces, so if anybody is willing to help me finding the solution I'd pay him/her a bear (or two)
Questions : does anybody know how to check CSPSA partitions ? It's content might have been damaged during flashes. As I have repartitioned when downgrading, partition size should be OK, but as I have read somewhere in xda that that partition content might not be replaced when flashing a tar.md5 that contain a cspsa image (which is the case in the ROM flashed to downgrade) because it contains the IMEI encrypted.
-> is there a way to mount and explore it or to extract the content of a cspsa image from a ROM (I've tried to mount it as ext4: failure)?
Thanks in advance !

What version of Jelly Bean you have flashed the first time?

Hi!
It was this one : Germany (T-Mobile) I9070PXXLPJ grabbed from Samfirmare (I doubled checked it was the one for the "P" version)
Any known pb with those JB upgrades?

flentus said:
Hi!
It was this one : Germany (T-Mobile) I9070PXXLPJ grabbed from Samfirmare (I doubled checked it was the one for the "P" version)
Any known pb with those JB upgrades?
Click to expand...
Click to collapse
I don't know if this version has the simlock, maybe your phone doesn't recognize sim card because you have updated with Odin from a simlocked GB to a non-simlocked JB or with simlock from another carrier

Hm, did you try to do factory reset? People had problems with signal if they do not do it after GB>JB.
Sent from my GT-I9070 using Tapatalk

Tesla-MADAL93 said:
I don't know if this version has the simlock, maybe your phone doesn't recognize sim card because you have updated with Odin from a simlocked GB to a non-simlocked JB or with simlock from another carrier
Click to expand...
Click to collapse
I restocked to original ROM : still no Sim card + if the pb was simlock, it would ask for unlock code whereas it just say "no SIM card".
---------- Post added at 10:10 AM ---------- Previous post was at 09:57 AM ----------
shut_down said:
Hm, did you try to do factory reset? People had problems with signal if they do not do it after GB>JB.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yes, I did factory resets, cache wipes, dalvik cache erasure multiple times (like 20) : no dice.
Does anybody know how to activate and analyse modem and RIL logs (and manage debug level) ? I think it would help find the root cause faster than "trial and error" + decrease the risk of bricking.

flentus said:
I restocked to original ROM : still no Sim card + if the pb was simlock, it would ask for unlock code whereas it just say "no SIM card".
Click to expand...
Click to collapse
Right, as you said maybe the problem is really the CSPSA because simlock infos are stored in this partition, seems that there is no way to unpack or to see the files contained in it, if you try to reflash Jelly Bean using repartition?

Tesla-MADAL93 said:
Right, as you said maybe the problem is really the CSPSA because simlock infos are stored in this partition, seems that there is no way to unpack or to see the files contained in it, if you try to reflash Jelly Bean using repartition?
Click to expand...
Click to collapse
- Reflash Jelly Bean with repartion : already done without success + JB ROMs (I've seen until now) do not contain CSPSA partition.
But my problem is not SIM lock, it's "no SIM" at all, as I already said, if it was a Sim lock issue, I would have the "insert unlock code" dialog at logon.
- For reference : I've found the sources for CSPSA Android manager and desktop tools at : download.meego.com/live/home:/imppa/Trunk/src/[/url] (it's from the Meego project)
I think it would enable to read/write from/to CSPSA partition properly (not peeking/poking blindly).
- For now, I'm trying to analyse "adb logcat -b radio", but lots off errors seem to but "normal", I can hardly identify which ones are relevant.
Anybody reading radio logcat fluently ?

Guys, could any of you backup the 3 following partitions of their I9070P and post them somewhere to me so that I can try to restore them on my device to see if it sorts out my problems ?
The full tuto is here : http://forum.xda-developers.com/show....php?t=2145464
Thanks in advance !

Bump !
Nobody willing to help me ?
Tried installing CM10.1: still "no SIM"

search xda to find help contain tee folder
i forget links source
but u can after root
copy orginal tee folder from ,, lib ,, system , tee
i use zsmg2 work and copy tee folder and flash another rom then copy tee and replace them fine my simcard work

zakaria9 said:
search xda to find help contain tee folder
i forget links source
but u can after root
copy orginal tee folder from ,, lib ,, system , tee
i use zsmg2 work and copy tee folder and flash another rom then copy tee and replace them fine my simcard work
Click to expand...
Click to collapse
Hi Zakaria !
thanks for your answer.
This solution works if you have flashed a "I9070" ROM on a "I9070P". But I never did that, I have always flashed "P" ROMs.
I have checked the MD5sum of the files in my "tee" folder, they are (as expected) the same as the ones into the .zip you are recommending me (I've checked the rights too : everything is OK).
Given what I see in the radio logs (logcat -b radio), the problem appears to be under the RIL layer: modem seems OK but it replies that the SIM is "absent" when queried. It could be a hardware problem to, but as it worked well before, I don't think so.
I would really like to overwrite my CSPSA, modemFS and EFS partitions from a working I9070P to see if it would solve the pb (I've made backups of mine in the current "non working" state).
I'm just expecting someone to dump and send them to me...
Have a nice day.

flentus said:
Hi Zakaria !
thanks for your answer.
This solution works if you have flashed a "I9070" ROM on a "I9070P". But I never did that, I have always flashed "P" ROMs.
I have checked the MD5sum of the files in my "tee" folder, they are (as expected) the same as the ones into the .zip you are recommending me (I've checked the rights too : everything is OK).
Given what I see in the radio logs (logcat -b radio), the problem appears to be under the RIL layer: modem seems OK but it replies that the SIM is "absent" when queried. It could be a hardware problem to, but as it worked well before, I don't think so.
I would really like to overwrite my CSPSA, modemFS and EFS partitions from a working I9070P to see if it would solve the pb (I've made backups of mine in the current "non working" state).
I'm just expecting someone to dump and send them to me...
Have a nice day.
Click to expand...
Click to collapse
We do not have much P ROMs, maybe just one. What P ROM you flashed?

shut_down said:
We do not have much P ROMs, maybe just one. What P ROM you flashed?
Click to expand...
Click to collapse
I've always flashed stock ROMs from SamMobile. There are dozens of them.
As explained in a my first post in this thread, I have tried to upgrade to JB (German (T-Mobile) I9070PXXLPJ) : this is when appeared the "no SIM" problem.
Then I went back to GB (tutorial posted in xda ref. given in my 1st post) and then applied stock ROM from my Carrier: stil no SIM. (SIM card is OK in any other phone, and tried at least 3 other SIM cards from my carrier, -my phone is still SIM locked to it: no SIM).
Even if I use a SIM card from another carrier, I don't get the "Enter unlock code" popup.
If I remove any of those SIM while phone is on, I don't get the "SIM removed: reboot" popup.
I have even flashed the latest nightly CM10.1 for the I9070P.
I can past radio logcats if anybody want to have a look at it...
Flentus

[Q] NO REGISTERING ON THE NETWORK NO SERVICE Galaxy s3 mini I8190n

Hello everyone. I bought a samsung galaxy s3 mini version nfc i8190n when lam bought the phone had a problem with GSM and HSDPA network. Do not want to register with any sim card network in any network. The phone has IMEI and modem good. When searching network manually, your phone finds them when I select a network does not register on the network. The phone came with android 4.1.2 baseband version i8190NXXALL6 Number
i8190NXXALL6 CSC: KOR. Before I get to work I saved the foders "efs" and "modemfs". For five days I struggle with it and we did and at the moment I'm stuck and ask for help.
Here are the steps that I did:
1. I changed csc from "kor" in "btu"
2. I rewrote the software with odin. Same i8190NXXALL6 Stock firmware samsung.
3. I installed CWM Recovery and I Flash all versions of this model,modem.
4. I installed custom ROMs, I returned to stock ROMs
5. I installed the stock recovery with odin and he appeared in DOWNLOAD MODE "custom binary download"=yes 2 times;"System Status"=custom;"current binary"=custom. I used the TriangleAWay and I brought "custom binary download=No. I8190NXXALL6 I reinstalled the stock rom via odin with repartition then full erease on the phone Cahe,Data,etc.and returned to" Custom Binay "= No Current Binay = Official Samsung, System status = Officia.Updates software and firmware from samsung works after many writings kind CWM unofficial ROMs, etc.
6. After each writing ROMs I rooted the phone and replaced the file "modemfs" nv.dat file. I downloaded from the XDA forum several files of other users Nv.dat i8190N this model, we have replaced each other and nothing.
7. I deleted all files in EFS folder and modemfs after deletion had baseband XXXXX. IMEI number has remained untouched.
8. I wrote modem manually via CWM recovery and nothing same problem.
I did have searched all the forum and other forums, I searched on google and do not know what to do. My phone is now rooted in the stock rom, stock kernel, stock recovery. These are details which are:
DEVICE INFORMATION FOR Samsung Galaxy S3 Mini
----------------------------------------------
Device Product Model: GT-I8190N
Firmware Build : 4.1.2
Firmware Build ID : JZO54K
Firmware Build PDA : I8190NXXAMJ2
Firmware Region Code: BTU
---------------------------------------------------
Waiting any kind of suggestion and let's solve this problem there are many people who have the same problem ......

You need this modem files
You need a file named NV.DAT, it's missing from your /modemfs/PERM/PROT
from: http://forum.xda-developers.com/showpost.php?p=42562414&postcount=19

pandu007 said:
You need a file named NV.DAT, it's missing from your /modemfs/PERM/PROT
from: http://forum.xda-developers.com/showpost.php?p=42562414&postcount=19
Click to expand...
Click to collapse
I replace before this file and nothing the same problem. Thanks for reply.

joker79 said:
Hello everyone. I bought a samsung galaxy s3 mini version nfc i8190n when lam bought the phone had a problem with GSM and HSDPA network. Do not want to register with any sim card network in any network. The phone has IMEI and modem good. When searching network manually, your phone finds them when I select a network does not register on the network. The phone came with android 4.1.2 baseband version i8190NXXALL6 Number
i8190NXXALL6 CSC: KOR. Before I get to work I saved the foders "efs" and "modemfs". For five days I struggle with it and we did and at the moment I'm stuck and ask for help.
Here are the steps that I did:
1. I changed csc from "kor" in "btu"
2. I rewrote the software with odin. Same i8190NXXALL6 Stock firmware samsung.
3. I installed CWM Recovery and I Fla**** all versions of this model modem.
4. I installed custom ROMs, I returned to stock ROMs
5. I installed the stock recovery with odin and he appeared in DOWNLOAD MODE "custom binary download"=yes 2 times;"System Status"=custom;"current binary"=custom. I used the TriangleAWay and I brought "custom binary download=No. I8190NXXALL6 I reinstalled the stock rom via odin with repartition then full erease on the phone Cahe,Data,etc.and returned to" Custom Binay "= No Current Binay = Official Samsung, System status = Officia.Updates software and firmware from samsung works after many writings kind CWM unofficial ROMs, etc.
6. After each writing ROMs I rooted the phone and replaced the file "modemfs" nv.dat file. I downloaded from the XDA forum several files of other users Nv.dat i8190N this model, we have replaced each other and nothing.
7. I deleted all files in EFS folder and modemfs after deletion had baseband XXXXX. IMEI number has remained untouched.
8. I wrote modem manually via CWM recovery and nothing same problem.
I did have searched all the forum and other forums, I searched on google and do not know what to do. My phone is now rooted in the stock rom, stock kernel, stock recovery. These are details which are:
DEVICE INFORMATION FOR Samsung Galaxy S3 Mini
----------------------------------------------
Device Product Model: GT-I8190N
Firmware Build : 4.1.2
Firmware Build ID : JZO54K
Firmware Build PDA : I8190NXXAMJ2
Firmware Region Code: BTU
---------------------------------------------------
Waiting any kind of suggestion and let's solve this problem there are many people who have the same problem ......
Click to expand...
Click to collapse
Er ask an samsung center bout it?

AssToast said:
Er ask an samsung center bout it?
Click to expand...
Click to collapse
No. The phone is fuul working, except no register in network, with out registering on the network i can`t do make calls receive calls sms e.t.c

joker79 said:
No. The phone is fuul working, except no register in network, with out registering on the network i can`t do make calls receive calls sms e.t.c
Click to expand...
Click to collapse
Yes i know but why would you purposely modify the modems and other stuffs, you should have brought it to your network provider service center or samsung and ask them about it, it could just be an SIM card problem

thanks for reply
AssToast said:
Yes i know but why would you purposely modify the modems and other stuffs, you should have brought it to your network provider service center or samsung and ask them about it, it could just be an SIM card problem
Click to expand...
Click to collapse
No. Is not sim problem issues becouse i test with a nother sim card`s of diferent carriers. Wen i put a nother sim card in apn setings are the setings for the carrier sim wat ai put,wen i cheange the sim with a nother carrier in the apn setings are the setings of the carrier sim card wat i m put. So for exemple i have 3 sim card`s of diferent carriers and all the sim`s card have pin security cod and the phone ask me for pin, after insert the pin code with all sim card`s don`t register on the netowork but the apn setings of the carrier automatic are there on the setings,so the phone see the sim card for all carriers, in setings wen a search manualy for the netorks the phone see the netowork wen i select the netowork manualy not register on the network,if i select automatic sey "registering on netowrk" but is not becouse if i want to call i can`t "not registering on network" sorry for my english ((

Try NV rebuild
joker79 said:
I replace before this file and nothing the same problem. Thanks for reply.
Click to expand...
Click to collapse
ok.. sorry about that. Find 'NV Rebuild' option from *#197328640# Service Mode and try rebuild it..

pandu007 said:
ok.. sorry about that. Find 'NV Rebuild' option from *#197328640# Service Mode and try rebuild it..
Click to expand...
Click to collapse
I do and this thing and nothing in service mode i rebuild the "NV" on *#0011# service mode info i have: gsm idle,hsdpa idle, service: limited. Here is the problem way the service is not aviable?

reflash efs
joker79 said:
I do and this thing and nothing in service mode i rebuild the "NV" on *#0011# service mode info i have: gsm idle,hsdpa idle, service: limited. Here is the problem way the service is not aviable?
Click to expand...
Click to collapse
hmm.. as the last solution - search "gsmhosting efs backup request" on google ( ai not able to paste external links here). You will find the backup efs folder from a working sgs3 mini i8190 phone. Flash it to your phone (first keep a backup of yopur own efs before doing this ... just in case)
all the best !

pandu007 said:
hmm.. as the last solution - search "gsmhosting efs backup request" on google ( ai not able to paste external links here). You will find the backup efs folder from a working sgs3 mini i8190 phone. Flash it to your phone (first keep a backup of yopur own efs before doing this ... just in case)
all the best !
Click to expand...
Click to collapse
I find but i need z3x box and i dont have thanks for the sugestion. I thing must be and another way.

joker79 said:
I find but i need z3x box and i dont have thanks for the sugestion. I thing must be and another way.
Click to expand...
Click to collapse
Were you able to resolve the problem? Please post solution for benefit of others.
:good:

I don`t have one
pandu007 said:
Were you able to resolve the problem? Please post solution for benefit of others.
:good:
Click to expand...
Click to collapse
My phone is bricked at this moment. Partition on the phone are mess up. One guy from the Mobile Phones Center brick the phone and my phone is in this stage righ now :http://forum.xda-developers.com/showthread.php?t=2657862 . Wen i have news and solution i post heare. Good day All.

I got the same problem with my phone, it just stopped registering on networks, tried any sim that was available in my country and nothing worked! If you find any solution please update!

Any updates???
Searched and searched... Had a good rooted stock rom, then tried something new a few days ago. I seem to have messed up the modem/bandband. Some issues as the original post. Re-flashed different roms, stock, rooted, unrooted, custom. Tried various different baseband updates. Everything works except being unable to register to the network. IMEI has not changed or been overwritten.
Any help would be gladly accepted.
i8190n

I have the exact same problem. I'm on Orange (EE). Yesterday morning my phone was registered on the network fine, I was in a poor signal area but still on 3G. Then I roamed across the south west of Britain and noticed my phone has no signal. It just wont register on any network, even EE. If I select automatic, it says it registers but it gets no signal and when I try to make a call. It says not registered on network!
The phone is totally stock. My sim works in another phone. I've done a factory reset but the problem still exists.
Was thinking about flashing the ROM but if others have been there too with no fix then I won't waste my time. I keep thinking EE have pushed something to my phone to block access as I'm out of contract by three months and they want me to upgrade!!