Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
I use Voice Command, that allows voice dialling through my Jawbone Headset.
fmohiy said:
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MSVC does by replacing the the dll with it's own.
My rom also does by replacing dll from HD.
Me too, I use MS Voice Command with SonyEricsson HBH sets and all work by pressing the button on headset which brings up the mic from voice command to command-the-phone
fmohiy said:
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MS Voice Command 1.6 here. It works about 75% of the time. Sometimes it doesn't work. No idea why.
Of course, I also have no idea why the Bluetooth disconnects randomly, for no apparent reason.
The same Parrot CK3100 works 100% of the time with a Nokia E71-2, and it works 100% of the time with an old Motorola Q9h.
No idea what the freak is wrong w/the Xperia.
Both the Voice Command issue (25% failure) and the Bluetooth disconnection happens with both the X1a and the X1i that I just sold.
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
michaelthemage said:
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
Click to expand...
Click to collapse
I'm on the UK R2A that was dated 20 Feb 2009. Bluetooth is still buggy.
There still seems to be some occasion that the phone goes into some kind of standby mode that causes Bluetooth not to be instantly available, and no doubt this affects the performance of Voice Command.
But, having said that: There are still times that you know the phone's not in standby, and Bluetooth + Voice Command is still buggy. Sometimes the phone responds with the Xperia speaker, and sometimes the phone responds w/the car speakers, and there doesn't seem to be any rhyme or reason to it.
fmohiy said:
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
Click to expand...
Click to collapse
I did not have to do anything special to get it to work the way that I wanted, except to assign the right silver button to Voice Command.
Can anyone tell how to make voice command or voice2go work with bluetooth headset?
Can you use all the available commands of MSVC?
Hi all, I have also installed the MSVC on my Xperia and the voice dial feature works fine, but I have tried to use other voice commands (just say "help" for a list of available commands) like "What time is it?" and it doesn't work.
Has anyone else tried it?
Update: I figured it out: you have to enable the "Status" option in MSVC settings!
MS VC R3AA013 & Jawbone Prime
Hi All
Had MSVC 1.6 on my x1 (R2a), all working fine, just been given a Jawbone Prime (thought result), BT linked up no worries. Tried to use MSVC over BT & not a thing. Can make a call manually n Jawbone picks it up, can use VC on my phone n Jawbone will pick it up, but picking up my phone with a BT sort of defeats the object of the exercise. Have looked all over XDA, and get a mixed impression, does a BT headset work with an X1 & MSVC?
Tried a couple of registry tweaks & nothin & I've now updated to R3 to see if that makes a difference but no joy.
Have I missed something here? Or am I just special?
I missed something!
I was using the wrong button, gotta use the assassin button & not the talk button. D'oh.
Having same issue as original post. WM6.5 w/ voice command loaded. Can't get bluetooth headset to initate voice command prompt. I have had to attach it to one of the buttons on the phone - but not ideal b/c of the incoming handsfree laws here.
Any suggestions?
Ok so I'm having a similar problem here. I have the X1a with WM 6.1 and MS Voice command 1.6 and my bluetooth is a Nokia BH-212. My blue tooth has a volume rocker and one master button for all functions. My issue is that yes I can answer with my bluetooth by pressing once, I can hang up the same way. If I press twice quickly it redials the last number. However when I hold the function button for the right amount of time (you get a long tone) it is supposed to activate the voice command prompt but instead i simply get the dialer on my screen. No prompt, nothing.
I have looked into the phone as much as I can to try and find something with no luck. I am a newbie so please be gentle. I just want that feature to work and my phone will do almost everything I want it to. Thanks all
THis is my first post and I'm very careful not to make any mistake.
I have HTC kaiser. I use bluetooth headset. I teach classes and during my class I have the phone on vibrate. I keep the blutooth headset in my pocket and every now and then the button on the headset will be pressed and even though the phone is locked by S2U2 by pressing the button (call button) on the bluetooth headset it will activate the voice command and will dial some number.
It is annying and embarssing when somebody tells me you dialed and I could hear your lecture.
Is there any way (tweak) to disable the voice command for bluetooth. I use voice command but most of the time I will activate it throuh my phone not through bluetooth.
If anybody has a solution to this please help to resolve the issue.
Thanks
Moved as not ROM Development.
Thanks for moving to the right section.
Can any body help on resolving the issue?
Thanks
Hey I've just got a new pair of sony bluetooth headphones for my phone which I'm loving and they're working great.
They have a button on them that when I press it brings up some king of bluetooth voice dialing thing.
I'm wondering if there is a way I can change that to default to google voice search so i can use it for all sorts of commands rather than just voice dialling. Anybody know if its possible?
Hi, after the jb upgrade the button of the Bluetooth headset does not work anymore.
i've tried to install cyberon voice commander without any result.
When i'm pressing it, not in call, nothing is happening.
any idea?
Nobody has the same problem? :crying:
Hi, nobody can try for me, please?
Same Problem
HI! I have the same problem. I've been using my bluetooth headset with a Motorola Pro with Android 2.3.6 without any issue.
Now, the same headset with my Optimus 4x with JB it doesn't launch none voice commands app. Neither Google voice search or Vlingo or any other.
Could anybody solve this?
Thanks!
Hello, I am unable to make calls with my LG L90 D410 over Bluetooth. When I press the button which is supposed to bring voice dial (I am using Cyberon Voice Commander), nothing happens (tried Supertooth Buddy, Supertooth Crystal and Supertooth HD - none of them worked).
Is there any way, how to make the calls? With my previous phone (Samsung Galaxy S Duos) it was OK.
The only way I found was to remap the re-dial function with Smart Bluetooth Headset, but it does not work quite as needed.
Would changing the Stock ROM to for example Cyanogen help with this matter?
Any help would be really appreciated, I really need to be able to do in-car calling.
Thank you very much in advance.
Can you please help, anyone? I really need the function of voice dialing over BT as I am disabled and use both hands for driving.
Solution
Hi, for someone who would tackle similar problem in the future, I solved the problem by getting different handsfree (bought Parrot Minikit Neo 2 HD) and it works!