Hi,
Have a XDA O2i and I have a motorola blue tooth handsfree.
I have been using these together fine for a while now. I have also purchased Voice Command. So my mobile speaks the number calling and my calendar reminders etc via the phones speaker and never through the bluetooth which I would dearly love. Then all of the sudden the other day Voice Command started working through the bluetooth headset and I was getting the calls announced on my bluetooth and it was fantastic. Then I tried to use the XDA and the thing was locked and I needed to reset it. Once it had been reset, it went back to announcing stuff via the phones speaker. Now I know it can be done, I want to know if there is a backdoor hack that can make this permanent and keep the XDA working at the same time. Anyone here know of this.
On a further note, I think it would be even better if you could use the bluetooth to make calls through the voice command software rather than having to use the actuall phone which sort of defeats the who functionality.
Anyway any help would be great.
andrewau
My headset (a Jabra) has 2 connection settings with the XDA2i.
In standby mode you get a headphones symbol on the PDA display
In active mode the headphones have lines coming out of them
To switch between the two modes on the Jabra you tap the call button on the headset.
I don't know if this will work, but give it a try.
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
I use Voice Command, that allows voice dialling through my Jawbone Headset.
fmohiy said:
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MSVC does by replacing the the dll with it's own.
My rom also does by replacing dll from HD.
Me too, I use MS Voice Command with SonyEricsson HBH sets and all work by pressing the button on headset which brings up the mic from voice command to command-the-phone
fmohiy said:
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MS Voice Command 1.6 here. It works about 75% of the time. Sometimes it doesn't work. No idea why.
Of course, I also have no idea why the Bluetooth disconnects randomly, for no apparent reason.
The same Parrot CK3100 works 100% of the time with a Nokia E71-2, and it works 100% of the time with an old Motorola Q9h.
No idea what the freak is wrong w/the Xperia.
Both the Voice Command issue (25% failure) and the Bluetooth disconnection happens with both the X1a and the X1i that I just sold.
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
michaelthemage said:
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
Click to expand...
Click to collapse
I'm on the UK R2A that was dated 20 Feb 2009. Bluetooth is still buggy.
There still seems to be some occasion that the phone goes into some kind of standby mode that causes Bluetooth not to be instantly available, and no doubt this affects the performance of Voice Command.
But, having said that: There are still times that you know the phone's not in standby, and Bluetooth + Voice Command is still buggy. Sometimes the phone responds with the Xperia speaker, and sometimes the phone responds w/the car speakers, and there doesn't seem to be any rhyme or reason to it.
fmohiy said:
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
Click to expand...
Click to collapse
I did not have to do anything special to get it to work the way that I wanted, except to assign the right silver button to Voice Command.
Can anyone tell how to make voice command or voice2go work with bluetooth headset?
Can you use all the available commands of MSVC?
Hi all, I have also installed the MSVC on my Xperia and the voice dial feature works fine, but I have tried to use other voice commands (just say "help" for a list of available commands) like "What time is it?" and it doesn't work.
Has anyone else tried it?
Update: I figured it out: you have to enable the "Status" option in MSVC settings!
MS VC R3AA013 & Jawbone Prime
Hi All
Had MSVC 1.6 on my x1 (R2a), all working fine, just been given a Jawbone Prime (thought result), BT linked up no worries. Tried to use MSVC over BT & not a thing. Can make a call manually n Jawbone picks it up, can use VC on my phone n Jawbone will pick it up, but picking up my phone with a BT sort of defeats the object of the exercise. Have looked all over XDA, and get a mixed impression, does a BT headset work with an X1 & MSVC?
Tried a couple of registry tweaks & nothin & I've now updated to R3 to see if that makes a difference but no joy.
Have I missed something here? Or am I just special?
I missed something!
I was using the wrong button, gotta use the assassin button & not the talk button. D'oh.
Having same issue as original post. WM6.5 w/ voice command loaded. Can't get bluetooth headset to initate voice command prompt. I have had to attach it to one of the buttons on the phone - but not ideal b/c of the incoming handsfree laws here.
Any suggestions?
Ok so I'm having a similar problem here. I have the X1a with WM 6.1 and MS Voice command 1.6 and my bluetooth is a Nokia BH-212. My blue tooth has a volume rocker and one master button for all functions. My issue is that yes I can answer with my bluetooth by pressing once, I can hang up the same way. If I press twice quickly it redials the last number. However when I hold the function button for the right amount of time (you get a long tone) it is supposed to activate the voice command prompt but instead i simply get the dialer on my screen. No prompt, nothing.
I have looked into the phone as much as I can to try and find something with no luck. I am a newbie so please be gentle. I just want that feature to work and my phone will do almost everything I want it to. Thanks all
I searched and found only old information from last year on this...
Does anyone have bluetooth headset-initiated voice command dialing working with their Captivates?
If so, please tell me exactly how you are accomplishing this -- what bluetooth headset, what ROM, what apps, your procedure for initiating a call from your bluetooth headset.
I'm not interested in any procedure that involves looking at or even touching the phone itself. I need a solution that will let me place a call to the contact of my choice solely from my bluetooth headset -- just push the button on the headset, tell it who to call and reliably make the call to the contact and phone type (mobile, home, etc.) that I tell it.
I am currently using the new Andromeda ROM but would be very interested in hearing what new ROMs do this well.
Thanks!
I am running Paragon ROM and I am able to make calls through my car stereo via Bluetooth voice dialing. Leave the phone in my pocket, hold a button down on my stereo until the voice asks for a command, I then say "Call Contact". If they have more than one number it asks if I want to call them at home work or mobile. I say "Mobile". The voice then repeats "Call Contact mobile"
I am running Paragon RC5.1, but Bluetooth voice dialing has worked for me since I first flashed with RC3.
Hi, is it possible to make a voice call with the jb rom 4.1.2?
I've tried a lot of software but i'm not able to recall a program by pressing the headset (Bluetooth) button.
When i'm pressing it nothing is happening
thanks
ekosbravo said:
Hi, is it possible to make a voice call with the jb rom 4.1.2?
I've tried a lot of software but i'm not able to recall a program by pressing the headset (Bluetooth) button.
When i'm pressing it nothing is happening
thanks
Click to expand...
Click to collapse
Hi, anyone has this problem?
I need to use the phone by a bluetooh headset to make a call.
Is it a way to make a voice call pressing the Bluetooth button to start a program as cyberon voice commander?
thank you
The same for me
ekosbravo said:
Hi, anyone has this problem?
I need to use the phone by a bluetooh headset to make a call.
Is it a way to make a voice call pressing the Bluetooth button to start a program as cyberon voice commander?
thank you
Click to expand...
Click to collapse
Hi ekosbravo: I have the same problem. I have an HBF-320 bluetooth handsfree from LG and the button doesn't Works from making a call. Only works for answer a call or, with a long press, for redialing the last number called. The same handsfree device Works fine with Motorola RAZR pone. With the Motorola, one touch to the button launches Google Now or Motorola's voice command. This function doesn't Works with my LG...
Same Problem
Hi!
I have the same problem! I have a BT headset that I had been using with my Motorola Pro with Android 2.3.6 and now I cannot launch any voice command app with it in my LG Optimus 4x with JB.
Did anybody solved this?
Thanks!
I have the Sony Ericsson MW600 bluetooth headset and it does flawlessly what you require. Therefore there is nothing wrong with the phones or the ROMs..
Hello, I am unable to make calls with my LG L90 D410 over Bluetooth. When I press the button which is supposed to bring voice dial (I am using Cyberon Voice Commander), nothing happens (tried Supertooth Buddy, Supertooth Crystal and Supertooth HD - none of them worked).
Is there any way, how to make the calls? With my previous phone (Samsung Galaxy S Duos) it was OK.
The only way I found was to remap the re-dial function with Smart Bluetooth Headset, but it does not work quite as needed.
Would changing the Stock ROM to for example Cyanogen help with this matter?
Any help would be really appreciated, I really need to be able to do in-car calling.
Thank you very much in advance.
Can you please help, anyone? I really need the function of voice dialing over BT as I am disabled and use both hands for driving.
Solution
Hi, for someone who would tackle similar problem in the future, I solved the problem by getting different handsfree (bought Parrot Minikit Neo 2 HD) and it works!