Database Develop

[Q] Change CSC and official updates behavior

Hello,
I bought a Galaxy Note almost 2 months ago and I have a question about CSC.
The Note is KKA KK5 KK5 having XEF (France) CSC.
I tried to access *#272*IMEI# and I am able to change to whatever CSC I want (multi csc).
I know that if I change it, it will hard reset. My question is if updating then via OTA or Kies, the update service will understand I need first a Wipe Rom and then an incremental update (if any)?
Or I must flash it via Odin an official Rom to align CSC and PDA+PHONE?
Do that invalidates my guarantee?
Thanks in advance!

pantweb said:
Hello,
I bought a Galaxy Note almost 2 months ago and I have a question about CSC.
The Note is KKA KK5 KK5 having XEF (France) CSC.
I tried to access *#272*IMEI# and I am able to change to whatever CSC I want (multi csc).
I know that if I change it, it will hard reset. My question is if updating then via OTA or Kies, the update service will understand I need first a Wipe Rom and then an incremental update (if any)?
Or I must flash it via Odin an official Rom to align CSC and PDA+PHONE?
Do that invalidates my guarantee?
Thanks in advance!
Click to expand...
Click to collapse
Flashing stock Roms via Odin will not invalidate your warranty.
If you change your CSC you will be getting normal OTA/Kies updates for the country you set.

Huh. I did that on mine to see what mine is set to and I get an error that says "Connection problem or invalid MMI code"?
Sent from my GT-N7000 using xda premium

chasmodo said:
Flashing stock Roms via Odin will not invalidate your warranty.
If you change your CSC you will be getting normal OTA/Kies updates for the country you set.
Click to expand...
Click to collapse
Ok, but even if after factory reset I'll get a KKA/KK5/KK5 e.g. DBT or AUT...
It will understand to update to the first Wipe rom of DBT or AUT region?

PorscheGuy said:
Huh. I did that on mine to see what mine is set to and I get an error that says "Connection problem or invalid MMI code"?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Did you replace IMEI with your IMEI number?

pantweb said:
Did you replace IMEI with your IMEI number?
Click to expand...
Click to collapse
Hahahahaha, OMG am I an idiot!!! I'm new to the unlocked GSM phones (always been ripped off by VZW) and as I'm sure you've already figured out I typed the numbers on the dialer that spelled IMEI. Wow do I feel stupid right now...
Sent from my GT-N7000 using xda premium

Will I get google voice assisted navigation if i change my csc to a supported region?
Sent from my GT-N7000 using XDA App

PorscheGuy said:
Hahahahaha, OMG am I an idiot!!! I'm new to the unlocked GSM phones (always been ripped off by VZW) and as I'm sure you've already figured out I typed the numbers on the dialer that spelled IMEI. Wow do I feel stupid right now...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Don't worry... Typing IMEI was not such a wrong thing to do reading my message.

l0rd_almighty said:
Will I get google voice assisted navigation if i change my csc to a supported region?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
I think unless you do not change Geographic region should be ok I think...

changing CSC
but remember if u change the csc it should be equal to the rom u use, or u wont get the updates trough KIES.. if ur CSC dont match the installed ROM then KIES wont reqonise your phone and u wont be able to update via KIES

j_tag said:
but remember if u change the csc it should be equal to the rom u use, or u wont get the updates trough KIES.. if ur CSC dont match the installed ROM then KIES wont reqonise your phone and u wont be able to update via KIES
Click to expand...
Click to collapse
So you all confirm that changing CSC does not let the phone to automatically get updates for the associated country, but it is necessary to manually put a stock ROM via Odin matching one of the existing couples (Rom, CSC)?

pantweb said:
I think unless you do not change Geographic region should be ok I think...
Click to expand...
Click to collapse
My phone has the xtc csc with no voice assisted google maps navigation. Is it based on the CSC or where I'm physically located?

I am unsure. I know my unlocked came with a CSC code for the UK but Google Maps Navigation works there so I am not sure.
Honestly I would say you might be best just making a back up of your phone and trying it. If it does not work change your CSC back to what you have now that you know works.
I will go out on a limb and say that I have not read anything from anyone saying changing their CSC stopped any google services that operate in the country that they live in. This could be from picking up your IMEI number or the carrier (IE ATT will not be found in China).
Best of luck.

CSC + update problem
Ignore & delete this post please.
tkx

fone frozen on splash screen

hey im new to all this so unfortunatley i never backed up my fone nor did i make a note of the original firmware but i want to just revert my fone back to its original state i dont know what information you need so please just ask away an ill do my best to get the information for you thx in advance

krayze2012 said:
hey im new to all this so unfortunatley i never backed up my fone nor did i make a note of the original firmware but i want to just revert my fone back to its original state i dont know what information you need so please just ask away an ill do my best to get the information for you thx in advance
Click to expand...
Click to collapse
what did you do to get your phone in the state it is in now ?

krayze2012 said:
hey im new to all this so unfortunatley i never backed up my fone nor did i make a note of the original firmware but i want to just revert my fone back to its original state i dont know what information you need so please just ask away an ill do my best to get the information for you thx in advance
Click to expand...
Click to collapse
also i have put an uninstall file that i read up an apparently should remove what ever i have done but upon puttin my sd card in to the fone an pressing "install zip from sd card" i get "E:Can't Mount /Sdcard" plz plz plz help

@denny said:
what did you do to get your phone in the state it is in now ?
Click to expand...
Click to collapse
i used odin an literaly just installed the abiss kernal thingy all went through ok rebooted fone an stopped on flash screen i read that the first time ya do it that screen can take about 5-10 mins but 2 an half hours later an still same thing

from what i work out i think this is the file i need to install:
United Kingdom
Galaxy Note: GT-N7000ZBAXEU
Carphone Warehouse
Galaxy Note: GT-N7000ZBACPW
N7000XXKKA - CPW
PDA: N7000XXKKA
CSC: N7000CPWKK3
Phone: N7000XXKK5
Version: Android 2.3.6 Gingerbread
Date: November 2011
Stock ROM Download: GT-N7000_CPW_N7000XXKKA_N7000CPWKK3
is this right an if so could i just install this file with odin???

krayze2012 said:
from what i work out i think this is the file i need to install:
United Kingdom
Galaxy Note: GT-N7000ZBAXEU
Carphone Warehouse
Galaxy Note: GT-N7000ZBACPW
N7000XXKKA - CPW
PDA: N7000XXKKA
CSC: N7000CPWKK3
Phone: N7000XXKK5
Version: Android 2.3.6 Gingerbread
Date: November 2011
Stock ROM Download: GT-N7000_CPW_N7000XXKKA_N7000CPWKK3
is this right an if so could i just install this file with odin???
Click to expand...
Click to collapse
as long as you havent damaged your phone already..yes flash gb rom with odin (read instructions )and dont be going near pit...what firmware were you on before you flashed abyss
---------- Post added at 05:54 PM ---------- Previous post was at 05:52 PM ----------
dont be using any uninstall zips or wiping anything until we find out what has been going on with you

@denny said:
as long as you havent damaged your phone already..yes flash gb rom with odin (read instructions )and dont be going near pit...what firmware were you on before you flashed abyss
---------- Post added at 05:54 PM ---------- Previous post was at 05:52 PM ----------
dont be using any uninstall zips or wiping anything until we find out what has been going on with you
Click to expand...
Click to collapse
kool; i have got the fone on again but only problem i have now is its not accepting my simcard

typical scenario.. flash to latest LRK UK.. phone before had been unlock... now, it's locked back again to original carrier.

letters_to_cleo said:
typical scenario.. flash to latest LRK UK.. phone before had been unlock... now, it's locked back again to original carrier.
Click to expand...
Click to collapse
just tried all networks in fone an still no joy but i know the fone came with a 3 sim card an as far as i know the phone came already unlocked

krayze2012 said:
just tried all networks in fone an still no joy but i know the fone came with a 3 sim card an as far as i know the phone came already unlocked[/QUOTEsorry wrong info
https://play.google.com/store/apps/...sMSwxLDEsImNvbS5oZWxyb3ouZ2FsYXh5c3VubG9jayJd
to unlock
Click to expand...
Click to collapse

@denny said:
krayze2012 said:
just tried all networks in fone an still no joy but i know the fone came with a 3 sim card an as far as i know the phone came already unlocked[/QUOTEsorry wrong info
https://play.google.com/store/apps/...sMSwxLDEsImNvbS5oZWxyb3ouZ2FsYXh5c3VubG9jayJd
to unlock
Click to expand...
Click to collapse
the only thing i can see is is galaxy 3 unlock will that work with the note
also it says requires root witch is what caused all my problems in the first place
Click to expand...
Click to collapse

[Q] CSC Unknown

I installed a rooted rom on my s3 mini and all was good. I then installed a csc changer to check what my csc was, when I seen it was SEB I changed it to BTU because I am in the UK. But when the phone rebooted the csc was "unknown" and the csc changer was showing it blank. My problem now is that I have all my back ups on Kies which now will not see my phone. I have searched, found and tried many solutions to this all to no avail. I tried the original SEB unrooted rom, still csc unknown, I tried various rooted roms and none would let me change the csc no matter what app I used. Any help with this would be greatly appreciated.

magickdude said:
I installed a rooted rom on my s3 mini and all was good. I then installed a csc changer to check what my csc was, when I seen it was SEB I changed it to BTU because I am in the UK. But when the phone rebooted the csc was "unknown" and the csc changer was showing it blank. My problem now is that I have all my back ups on Kies which now will not see my phone. I have searched, found and tried many solutions to this all to no avail. I tried the original SEB unrooted rom, still csc unknown, I tried various rooted roms and none would let me change the csc no matter what app I used. Any help with this would be greatly appreciated.
Click to expand...
Click to collapse
try to reflash your ROM with odin as "CSC" not as "PDA" then it should show your right csc code again.

enox.co said:
try to reflash your ROM with odin as "CSC" not as "PDA" then it should show your right csc code again.
Click to expand...
Click to collapse
Wow, thank you so much for this. I have spent 3 days trying to sort this out. That is 2 questions asked today and 2 problems fixed, you guys on this site are amazing. Once again many thanks my friend!

enox.co said:
try to reflash your ROM with odin as "CSC" not as "PDA" then it should show your right csc code again.
Click to expand...
Click to collapse
i had same problem. how do u mean reflash? i will reflash my current firmware as CSC?
Sent from my GT-I8190 using xda app-developers app

magickdude said:
I installed a rooted rom on my s3 mini and all was good. I then installed a csc changer to check what my csc was, when I seen it was SEB I changed it to BTU because I am in the UK. But when the phone rebooted the csc was "unknown" and the csc changer was showing it blank. My problem now is that I have all my back ups on Kies which now will not see my phone. I have searched, found and tried many solutions to this all to no avail. I tried the original SEB unrooted rom, still csc unknown, I tried various rooted roms and none would let me change the csc no matter what app I used. Any help with this would be greatly appreciated.
Click to expand...
Click to collapse
I had this exact same problem when I flashed rooted XXAMA2. All i got was CSC:unknown. Couldn't change it with csc changer.
I had to go back to stock recovery and then flash firmware again with Odin, then I could set right CSC.

AW: [Q] CSC Unknown
dredremon said:
i had same problem. how do u mean reflash? i will reflash my current firmware as CSC?
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Yes....Just flash the Firmware with Odin as CSC again "not as PDA" ...
Sent from my GT-I8190 using xda premium

magickdude said:
I installed a rooted rom on my s3 mini and all was good. I then installed a csc changer to check what my csc was, when I seen it was SEB I changed it to BTU because I am in the UK. But when the phone rebooted the csc was "unknown" and the csc changer was showing it blank. My problem now is that I have all my back ups on Kies which now will not see my phone. I have searched, found and tried many solutions to this all to no avail. I tried the original SEB unrooted rom, still csc unknown, I tried various rooted roms and none would let me change the csc no matter what app I used. Any help with this would be greatly appreciated.
Click to expand...
Click to collapse
make sure you have the correct ROM. Is your device 8190 or 8190N or 8190L? also after flash of ROM and first boot do hard reset.
Sent from my GT-I8190N using xda premium

Have you tried SAMSUNG GALAXY S3 CSC SELECTOR on Play Store, just download/install/run and choose your code, then it works!

tys0n said:
I had this exact same problem when I flashed rooted XXAMA2. All i got was CSC:unknown. Couldn't change it with csc changer.
I had to go back to stock recovery and then flash firmware again with Odin, then I could set right CSC.
Click to expand...
Click to collapse
Thanks, this is helping.

Has anyone a link to stock recovery? I´m in a hurry, sorry mates... wanted to get my wife´s S§ mini back to working but nothing helped until now.. will give it a try with the stock recovery and reflashing a Sammy ROM. Sammy ROM´s not a problem, but where can I get that recovery only?!

kischde said:
Has anyone a link to stock recovery? I´m in a hurry, sorry mates... wanted to get my wife´s S§ mini back to working but nothing helped until now.. will give it a try with the stock recovery and reflashing a Sammy ROM. Sammy ROM´s not a problem, but where can I get that recovery only?!
Click to expand...
Click to collapse
Have a look at my signature if you havn't found it yet.:good:

tys0n said:
Have a look at my signature if you havn't found it yet.:good:
Click to expand...
Click to collapse
@tys0n
Thanks a LOT, mate!! That´s what I was looking for
Downloaded modem, stock recovery and TWRP now. Unfortunately I couldn´t get the modem back to be shown as it is (after a ROM update modem changed to XXXX ....... since then IMEI was working though, calls were working too but no mobile internet connection) but mobile internet seems to work again now, too... Very curious so far.
Restoring EFS didn´t work but maybe it will work now as CSC is changed back to DBT now or so.. Sometimes flashing Sammy ROMS as PHONE instead of PDA does work (read that in another thread in here).
Thanks again for your help and have a nice evening!
Cheers!

give me some intructions please , what i do exactly (same problem csc unknown ,no mobile data/internet..)

alexandru5796 said:
give me some intructions please , what i do exactly (same problem csc unknown ,no mobile data/internet..)
Click to expand...
Click to collapse
Well the problem is partly solved.. I flashed stock recovery, stock ROM and that modem you can find in tys0n´s signature. Mobile internet is working again but modem still shows XXXX - weird thing ^^
Give it a try in that way. As it seems this is a possibility to get your device working again.
I´ll continue trying and if I find a way to solve it finally I´ll let you know.

enox.co said:
try to reflash your ROM with odin as "CSC" not as "PDA" then it should show your right csc code again.
Click to expand...
Click to collapse
I try this method but csc still unknown. Is there another method?

CSC code uknown/KOR after flashing original ROM

Hello,
I had a Galaxy S3 Mini i8190N with Android 4.1.2 (AUT).
But this version haved some problems, and i've found Android 4.1.2 (DBT) from april 2013 and just flashed this ROM.
But now says SAMSUNG KIES i don't can't see you're firmware version and Samsung update can not accepted the rules for checking updates.
Now i see that my CSC code is (KOR/Uknown) and not DBT.
How can i set this good? My phone is 100% original, i only just flashed the version from DBT beacause my calling problems and saw that this one was newer!
My phone is not rooted.
Sorry for the bad english.
Greetz,
Marco
PS: The ROM is downloaded from SamMobile en just fashed with ODIN v3.04

hy, you can change csc code from your mobile:
*#272*imei#
then select csc corect

b0g said:
hy, you can change csc code from your mobile:
*#272*imei#
then select csc corect
Click to expand...
Click to collapse
Sorry, that don't work for the galaxy S3 mini. he find nothing.

marcodehaas1987 said:
Sorry, that don't work for the galaxy S3 mini. he find nothing.
Click to expand...
Click to collapse
Download csc celect, but it needs root and will also wipe everything as it need to do a factory reset.

hy,
please follow this steps:
1. flash original firmware for your phone i8190N (AUT), i this this is: http://hotfile.com/dl/186985702/d6a...T-I8190N-SWC-I8190NXXALL4-1355501275.zip.html
2. Do a factory reset
3. *#272*imei#, and modify csc to original (AUT or SWC)
4. the if you want to change firmware to DBT do again *#272*imei#, and modify csc to DBT;
if dont apear DBT please dont go to step 5, 6, because kies dont will sees the see firmware,
because dont have csc DBT and your CSC will go to default KOR
5. flash firmware DBT
6. Do a factory reset

tys0n said:
Download csc celect, but it needs root and will also wipe everything as it need to do a factory reset.
Click to expand...
Click to collapse
Thnx for the tip. i try firtst the post from b0g. If that don't work i go to look how to root my mobile phone for it.
b0g said:
hy,
please follow this steps:
1. flash original firmware for your phone i8190N (AUT), i this this is: ***
2. Do a factory reset
3. *#272*imei#, and modify csc to original (AUT or SWC)
4. the if you want to change firmware to DBT do again *#272*imei#, and modify csc to DBT;
if dont apear DBT please dont go to step 5, 6, because kies dont will sees the see firmware,
because dont have csc DBT and your CSC will go to default KOR
5. flash firmware DBT
6. Do a factory reset
Click to expand...
Click to collapse
Thnx, i'll download now AUT firmware.

b0g said:
hy,
please follow this steps:
1. flash original firmware for your phone i8190N (AUT), i this this is: [/url]
2. Do a factory reset
3. *#272*imei#, and modify csc to original (AUT or SWC)
4. the if you want to change firmware to DBT do again *#272*imei#, and modify csc to DBT;
if dont apear DBT please dont go to step 5, 6, because kies dont will sees the see firmware,
because dont have csc DBT and your CSC will go to default KOR
5. flash firmware DBT
6. Do a factory reset
Click to expand...
Click to collapse
when i'm using the code *#272*IMEI# he says "Connection problem or invalid MMI code"

tys0n said:
Download csc celect, but it needs root and will also wipe everything as it need to do a factory reset.
Click to expand...
Click to collapse
How can i simple root my mobile?

please check this link:
http://forum.xda-developers.com/showpost.php?p=41136148&postcount=3

E:signature vertification failed

i have download the Galaxy S3 Mini Rom Toolit, donate it en used it.
Now i've got the right CSC.

Can you give a more detailed description?
marcodehaas1987 said:
i have download the Galaxy S3 Mini Rom Toolit, donate it en used it.
Now i've got the right CSC.
Click to expand...
Click to collapse
Hi marcodehaas1987,
I have the same issue with fallback KOR CSC after firmware flashing via Odin.
Can you give a more detailed description of the steps you took to reset the CSC?
I appreciate your help.
Cheers,
tedstryker

tedstryker said:
Hi marcodehaas1987,
I have the same issue with fallback KOR CSC after firmware flashing via Odin.
Can you give a more detailed description of the steps you took to reset the CSC?
I appreciate your help.
Cheers,
tedstryker
Click to expand...
Click to collapse
I am busy now, but monday when i'm back home i'll wil tell you the steps.
I hope this not a problem?

marcodehaas1987 said:
I am busy now, but monday when i'm back home i'll wil tell you the steps.
I hope this not a problem?
Click to expand...
Click to collapse
That's just perfect, thanks for your help.

Samsung Note 9 will not update 8.1.0

Hi, don't know if anyone can help?
I live in the UK and have a Samsung Note 9 which came from the UAE. The phone will not update and is currently Android version 8.1.0 with security patch dated 01/11/18.
I have tried updating via Samsung Smart Switch.
I have cleared the cache, done a factory reset and checked if the phone is rooted, which it isn't.
I believe the only way to update the android version is to do it manually, can anyone help with this.
The phone is SM-N960F dual sim Serial Number RF8KC1DMFSR
Thanks

ILecky said:
Hi, don't know if anyone can help?
I live in the UK and have a Samsung Note 9 which came from the UAE. The phone will not update and is currently Android version 8.1.0 with security patch dated 01/11/18.
I have tried updating via Samsung Smart Switch.
I have cleared the cache, done a factory reset and checked if the phone is rooted, which it isn't.
I believe the only way to update the android version is to do it manually, can anyone help with this.
The phone is SM-N960F dual sim Serial Number RF8KC1DMFSR
Thanks
Click to expand...
Click to collapse
Dial *#1234# and send me screenshot
I'll give you firmware links for latest android 10 for your model
You can flash via odin tool from pc.

Just go to https://www.sammobile.com/firmwares/ and run a check for the OS for your device. Download it, connect your device to a computer and use Odin to install it onto your device.

ILecky said:
Hi, don't know if anyone can help?
I live in the UK and have a Samsung Note 9 which came from the UAE. The phone will not update and is currently Android version 8.1.0 with security patch dated 01/11/18.
I have tried updating via Samsung Smart Switch.
I have cleared the cache, done a factory reset and checked if the phone is rooted, which it isn't.
I believe the only way to update the android version is to do it manually, can anyone help with this.
The phone is SM-N960F dual sim Serial Number RF8KC1DMFSR
Thanks
Click to expand...
Click to collapse
any luck with your issue? if not send a screen shot of your software information... btw i have same N960F/DS which is from UAE and and i never had issues with updates in my country SL

Please find info as requested. Thanks
Trex888 said:
Dial *#1234# and send me screenshot
I'll give you firmware links for latest android 10 for your model
You can flash via odin tool from pc.
Click to expand...
Click to collapse
For some reason I couldn't paste a picture in the reply to you so I have typed the info. Hope this helps
AP:N960FXXS2ARK3
CP:N960FXXU2ARJ1
CSC:N960FOXM2ARK2
Model:SM-N960F/DS
Thanks

ILecky said:
For some reason I couldn't paste a picture in the reply to you so I have typed the info. Hope this helps
AP:N960FXXS2ARK3
CP:N960FXXU2ARJ1
CSC:N960FOXM2ARK2
Model:SM-N960F/DS
Thanks
Click to expand...
Click to collapse
Here is the firmware link for your model android 10 latest.
https://de1.androidfilehost.com/dl/...261759684/N960FXXS5DTB6_N960FOXM5DTB6_XSG.zip
First install Samsung USB mobile drivers on pc
Extract the firmware file
Warning
Before flashing must Backup all your data and must Do factory reset your device to remove all your accounts to avoid FRP lock.
Boot device into download mode
Use latest odin tool to flash
And do wipe data factory reset from stock recovery after flashing to get clean operating system.
Forst boot may take upto 10 minutes so be patient.
Please note
If you flash android 10 you won't be able to downgrade to oreo or pie again.
Good luck.

shouldnt use DTB6 firmware (March update) which was reported to cause some users' fail screens.
there was May update yesterday for N960F ver DTE2.
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/DBT/download/N960FXXS5DTE2/338040/

Link not working
Trex888 said:
Here is the firmware link for your model android 10 latest.
First install Samsung USB mobile drivers on pc
Extract the firmware file
Warning
Before flashing must Backup all your data and must Do factory reset your device to remove all your accounts to avoid FRP lock.
Boot device into download mode
Use latest odin tool to flash
And do wipe data factory reset from stock recovery after flashing to get clean operating system.
Forst boot may take upto 10 minutes so be patient.
Please note
If you flash android 10 you won't be able to downgrade to oreo or pie again.
Good luck.
Click to expand...
Click to collapse
Hi, thanks for the info however the link does not appear to work?

ILecky said:
Hi, thanks for the info however the link does not appear to work?
Click to expand...
Click to collapse
Better you download from sammobile website
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/DBT/download/N960FXXS5DTE2/338040/

Sorry for been a pain
Trex888 said:
Better you download from sammobile website
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/DBT/download/N960FXXS5DTE2/338040/
Click to expand...
Click to collapse
Just checking the file on the link is for Germany, is this correct as I live in the Uk and phone was from Dubai. Thought best to check before I download etc.
Thanks

ILecky said:
Just checking the file on the link is for Germany, is this correct as I live in the Uk and phone was from Dubai. Thought best to check before I download etc.
Thanks
Click to expand...
Click to collapse
As far as I understand, your phone has OXM which includes multi CSC, so it doesn't matter which firrmware you can download and flash.
If you have doubt, just install Samsung Phone Info from playstore. In CSC code tab, check what is its original csc.
Use samfirm or frija to download at very high speed.

ILecky said:
Just checking the file on the link is for Germany, is this correct as I live in the Uk and phone was from Dubai. Thought best to check before I download etc.
Thanks
Click to expand...
Click to collapse
This is multi csc firmware so don't worry it will detect your sim card and select csc/country code automatically where you live.

Thanks all working
Trex888 said:
This is multi csc firmware so don't worry it will detect your sim card and select csc/country code automatically where you live.
Click to expand...
Click to collapse
Thanks for your help. My phone is now running on Android 10, the only thing now to do is to setup all the apps etc (I used smartswitch prior to flashing).
Once again thanks for your help.

ILecky said:
Thanks for your help. My phone is now running on Android 10, the only thing now to do is to setup all the apps etc (I used smartswitch prior to flashing).
Once again thanks for your help.
Click to expand...
Click to collapse
Thanks to xda and android open source and Samsung for firmware.
We are always happy to help.