Since two days ago, I've been unable to enable NFC in CM. When I click the box to enable it, it grays out for a few minutes before finally disabling itself again. Has anyone else had this problem, and what would be a good way of figuring out what the problem is?
Sent from my One using Tapatalk 4 Beta
aznxk3vi17 said:
Since two days ago, I've been unable to enable NFC in CM. When I click the box to enable it, it grays out for a few minutes before finally disabling itself again. Has anyone else had this problem, and what would be a good way of figuring out what the problem is?
Sent from my One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Dealing with the same issue here. Feels like it tries to load but then unchecks itself. Tried to install the modded NFC.apk but it didn't change anything. I think the binaries need to be updated but I don't know how to compile a flashable zip to do that
Is there any reason you guys are running CM 10.1? And not CM 11 or at least CM 10.2?
Don't think it's cm specific. Currently on 4.4 android HD, was previously on 4.3 and NFC was not turning on on either
Same here!
Same issue here. First I was on CM 10.2, this was the first time I seen the issue. Now I am on CM 11 and the issue is still there. Already formatted System, Dalvik, Cache and Data. Anybody got an idea how to fix it? I need NFC :/
Related
I recently installed CM9 .06 on my touch pad and it was working great for a few hours. Then i restarted the device and now the wifi wont come back up and it keeps rebooting all the time. Has anyone else see this issue ?
This should be in Q&A, but yes I have, I switched to the Nightlies and haven't had it happen since.
Sent from my HP TouchPad on CM9 using Tapatalk
Thanks I will look over again the Q&A and try to download the nightlys also.
Though has anyone seen an issue with the email app ? After the app configures it just keeps saying "waiting for sync". I havent seen anyone else say anything about this
Sounds like it's either a problem with your configuration or your gapps package. Either try a new one or check your info.
Also, I highly suggest trying the nightly builds. The latest one is excellent- touchscreen is fixed, wifi strength is better, better speed, and more features. And the reboot fix is applied.
chitownevo said:
Thanks I will look over again the Q&A and try to download the nightlys also.
Though has anyone seen an issue with the email app ? After the app configures it just keeps saying "waiting for sync". I havent seen anyone else say anything about this
Click to expand...
Click to collapse
After flashing the gapps you need to flash the fix file as well. Just be sure to wipe cache and dalvik before flashing. Also, this does not belong in this section.
I saw there are a few different verisions of GApps. Is there one that i should be using ?
chitownevo said:
I saw there are a few different verisions of GApps. Is there one that i should be using ?
Click to expand...
Click to collapse
The latest one, v11.
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
set your brightness to 20% and always turn-off wifi when its not in use ....its works for me....played my tab for 30 minutes and my tablet consumed only 15% of the battery
SORRY FOR MY BAD ENGLISH
*i also turn off mobile data......when i dont need to use the internet....
frrambo said:
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
Click to expand...
Click to collapse
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
Thanks, I'll give it a shot.
imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
I always get encryption failed when installing alroger builds - I guess you are not running CDMA (p1c) ?
If you are using a p1c then you are lucky to have alroger working.
cdesai builds work great on p1c but usb tether doesn't seem to work on any CM10.x build yet which is annoying
Re: CyanogenMod 10.1 Experimental Builds
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Sent from my SCH-I800 using Tapatalk 2
frrambo said:
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Click to expand...
Click to collapse
Yeah alroger's newest builds are broken on p1c but if you go back to his first p1c release it actually works okay http://goo.gl/QBsmn
Actually I came back to the tab tonight and it was constantly rebooting in a loop so I may go back to cdesai too.
The one I am really waiting for is AOKP 4.2.2 for p1c, apparently his build machine is broken but hopefully he will post it soon.
But I cannot do usb tether or otg in any 4.1.x or 4.2.x build yet which is frustrating.
CM9.1 is very stable but missing all the 10.1 niceties.
You should put "p1c cmda" in the thread title here so we can have a 10.1 "club" for p1c folks.
I am running alrogers latest builds without any problem on my p1. Fast reliable and without any problems
I noticed fewer problems of unattended sleep or reboot after I flushed Dalvik and partition caches.
But the device still drains battery faster than the lastest CM10 nightlies (screenshots included) did, mostly because of the radio (30% - veille GSM) and while inactive (21% - tablette inactive).
Do you experience the same? Do you know where it could come from? (since I'm not able to post to dev section yet, too).
Re: CyanogenMod 10.1 Experimental Builds
If you have unknown baseband also, then the cause has been widely known. Broken modem.
Download JPZ modem zip from the development forum, unzip it and paste modem.bin to /radio to replace the one there.
Sent from my GT-I9300 using xda app-developers app
alroger's newest build from 20130328 now has working usb tether and works on my cdma (p1c)
but it's missing an adb toggle, cannot find it for the life of me
aha! found it - in CM10 you have to go to settings -> about tabet -> build number -> tap 7 times (to enable dev mode)
So several days after reflashing cdesai's experimental build I'm happy to report only one SoD compared to one or two previously.
With a bootlooping recovery, I used Heimdall to re-stock (mostly, I used a CWM kernal). I then reflashed with the same proceedure as before, wiping cache/dalvic, flashed gapps and I'm good to go.
Aside from the USB tether and BT issues (maybe someday...), my only problem now is that the screen orientation is sometimes unresponsive. Even the battery life is good, better than I had on CM 9.
I've not had any radio problems, at least none that Better Battery Stats could show me. The modem is the likely culprit.
Good suggestion on the title change p1c needs more love! :highfive:
Of course now with _ck_'s news that alroger has USB tether working, I'm tempted to try it again. Just can't leave well enough alone.
Just came back to my tablet to wake it up and the screen shows "encryption unsuccessful" wtf
Maybe alrodger build is not quite ready.
Spent an hour getting everything right again but not messing around this time, did both Titanium backup and clockwork backup.
Hello everyone. I am wondering if anyone in the cm nightly build that I an using is experiencing nfc issues. I am not able to turn it on. Now I have deleted cache in the recovery, and downgraded the cm build, but I have not fixed the problem. Now my question is : did anybody else have this problem? And what should I do to fix it?
Thank you so much for your help. If you have any questions, do not hesitate to ask .
Savvas9988 said:
Hello everyone. I am wondering if anyone in the cm nightly build that I an using is experiencing nfc issues. I am not able to turn it on. Now I have deleted cache in the recovery, and downgraded the cm build, but I have not fixed the problem. Now my question is : did anybody else have this problem? And what should I do to fix it?
Thank you so much for your help. If you have any questions, do not hesitate to ask .
Click to expand...
Click to collapse
Are you sure it worked before on CM cause when I was on CM NFC did not work? But that was a long time ago so who knows lol
Use cm file manager and remove /system/vendor/firmware/libpn544_fw.so then reboot and it will work.
Sent from my HTC One using Tapatalk 4 Beta
KAsp3rd said:
Use cm file manager and remove /system/vendor/firmware/libpn544_fw.so then reboot and it will work.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thank you so much! It worked .
So I've been on CM12 for a few weeks then one day the data disappeared. I can't get it to work and I've read this is a known issue and there is a fix. Anyone know how to do this?
jprovan1 said:
So I've been on CM12 for a few weeks then one day the data disappeared. I can't get it to work and I've read this is a known issue and there is a fix. Anyone know how to do this?
Click to expand...
Click to collapse
Which CM12 ROM are you currently at?
jprovan1 said:
So I've been on CM12 for a few weeks then one day the data disappeared. I can't get it to work and I've read this is a known issue and there is a fix. Anyone know how to do this?
Click to expand...
Click to collapse
Flash back to stock, get lte, flash latest cm build. The commit causing the issue has been reverted.
Sent from my Nexus 6 using XDA Free mobile app
Damon13 said:
Which CM12 ROM are you currently at?
Click to expand...
Click to collapse
I have done this still not working. Last cm build I tried was 3/6 I believe. Currently on stock ROM now.
Check your APNs.... select the .fast one, and make sure both APN protocols say ipv4.
Sent from my Nexus 6
No options to change APN
Anybody else experiencing issues with the CM nightlies for Shamu and reconnecting to VZW after updates/reboots?
For the past few weeks now I have to reboot multiple times to get cell connectivity back. Sometimes going on and off of airplane mode a few times will fix it also. Once connected it will stay pinned up until the next reboot. I used to have a tasker scheduled reboot early every morning, but I can't do that now because I've missed some pretty important calls.
Thoughts?
Also, which logs can I look at (And where are they).
I'm on Verizon as well and I have had the EXACT same problem. It occurs on pretty much every CM based ROM I've used. However, I recently started running Dirty Unicorns, and for some reason it doesn't happen hardly at all (if ever) with that ROM. I am wondering if there is a fix that the DU devs have implemented that CM and other CM based ROM devs haven't as of yet.
Sent from my Nexus 6 using Tapatalk
Othoric said:
I'm on Verizon as well and I have had the EXACT same problem. It occurs on pretty much every CM based ROM I've used. However, I recently started running Dirty Unicorns, and for some reason it doesn't happen hardly at all (if ever) with that ROM. I am wondering if there is a fix that the DU devs have implemented that CM and other CM based ROM devs haven't as of yet.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Does DU have the "close all" apps button after touching the square? That feature is huge for me!
Yes it has the clear all recents button. It also has a ton of other features as well.
Sent from my Nexus 6 using Tapatalk
Downloading....
Wipe and Flash in TWRP work well?
illushinz said:
Wipe and Flash in TWRP work well?
Click to expand...
Click to collapse
Yes. I usually go to advanced wipe and wipe everything BUT Internal Storage. Sometimes just doing a factory reset in TWRP works just as well, but I like to make sure everything is completely fresh when I do a clean flash.
Sent from my Nexus 6 using Tapatalk
Ok, WOW.
Thanks a ton for the info, DU is faaaaaaaast!