Database Develop

ClockworkMod Recover on e3 recovery galaxy s

I have a 2.3.6 rom stock , on galaxsy s whit 3e recovery.
I cant install ClockworkMod .
any ideea ? or a recomended kernel whit cwm .
i only have odin cant do adb .. etc..
10x
or a 4.0 version of the andraoid whit odin instalation ....

Kernel
razvanmarius2k5 said:
I have a 2.3.6 rom stock , on galaxsy s whit 3e recovery.
I cant install ClockworkMod .
any ideea ? or a recomended kernel whit cwm .
i only have odin cant do adb .. etc..
10x
or a 4.0 version of the andraoid whit odin instalation ....
Click to expand...
Click to collapse
You would get the kernel here:
http://forum.xda-developers.com/showthread.php?t=788108
Gopala Subramanium
http://www.FixMyStuff.In
Facebook: http://www.facebook.com/gopala.subramanium | Twitter: @sgopala

Search cf root for your firmware, flash in Odin

gopalasubramanium said:
You would get the kernel here:
http://forum.xda-developers.com/showthread.php?t=788108
Gopala Subramanium
http://www.FixMyStuff.In
Facebook: http://www.facebook.com/gopala.subramanium | Twitter: @sgopala
Click to expand...
Click to collapse
10x worked great !!!!

Same Exact Problem
razvanmarius2k5 said:
10x worked great !!!!
Click to expand...
Click to collapse
Hi, I have the same phone and the same stock rom 2.3.6 and went to the page they gve you here... but which of that kernels should I use? there's a list of kernels and want to know which one worked for you... thanks

R4f said:
Hi, I have the same phone and the same stock rom 2.3.6 and went to the page they gve you here... but which of that kernels should I use? there's a list of kernels and want to know which one worked for you... thanks
Click to expand...
Click to collapse
give us ur build number, fone version, android version n any necessary info.
Sent from my GT-I9000 using xda app-developers app

Similar error.
I have the same problem. I tried to use a CF kernel, but the one for build "gingerbread.DDJVB" didn't work and I followed the steps in this thread "http://forum.xda-developers.com/showthread.php?t=1805526" (Second post.).
The flashing was successful and it installed CWM and superuser but whenever I boot into recovery, it ends up in android recovery 3e instead of CWM. I ultimately want to use the latest nightly rom for android 4.2.2. Is there a way for me to get into CWM? Or maybe get the rom without using CWM?

AlchemistK said:
I have the same problem. I tried to use a CF kernel, but the one for build "gingerbread.DDJVB" didn't work and I followed the steps in this thread "http://forum.xda-developers.com/showthread.php?t=1805526" (Second post.).
The flashing was successful and it installed CWM and superuser but whenever I boot into recovery, it ends up in android recovery 3e instead of CWM. I ultimately want to use the latest nightly rom for android 4.2.2. Is there a way for me to get into CWM? Or maybe get the rom without using CWM?
Click to expand...
Click to collapse
of course, see step 14 in da second post da word "rooted with original kernel"
why dont u flash jvu based?
read here for more detail
http://forum.xda-developers.com/showthread.php?t=2149455
n.....i juz wanna ask........if u wanted da cwm recovery for flashing n not stock rooted kernel, why do u proceed to step 14? u juz need to stop at step 8 n use semaphore kernel instead of flashing stock kernel back after step 8 on ur link...:what:
Sent from my GT-I9000 using xda app-developers app

[Q] How To for the Galaxy Note GT-N7000

Hello,
I am new to the XDAdevelopers forum and don't have much knowledge of rooting or installing customs roms to Android phones.
I currently own the Galaxy Note GT-N7000 and just looking around some videos I would love to have some customs rom installed on my phone, such as the new Jelly Bean roms that are out now.
I would love to know on how to root my Galaxy Note if there is a Noob Tutorial for rooting the galaxy note and maybe a Noob Tutorial on how to install Jelly Bean rom that is currently out (any suggestion on which rom would be great)
As I said I am a noob and don't have much knowledge on how to mod your android phones and any help would be greatly appreciated
FYI: Looked around the forums for the while, I couldn't find anything simple enough, I bet there is somewhere in the forum, not sure if I was looking correctly >.<

Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best

rajsekhar.300 said:
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
Click to expand...
Click to collapse
Thanks for replying do you have any links to the Kernals and JB roms ? and if there is any tutorial for them too
Thanks again for your time.

Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921

rajsekhar.300 said:
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
Click to expand...
Click to collapse
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT

Georific said:
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Click to expand...
Click to collapse
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.

jeetu1981 said:
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
Click to expand...
Click to collapse
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel

No.After you flash the kernel,you can install jb rom through cwm

Georific said:
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
Click to expand...
Click to collapse
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.

jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?

Georific said:
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Click to expand...
Click to collapse
As long as you are on any safe kernel you can flash any JB rom, no matter if you are on any TW ICS, GB or CM9/10 roms. I am on CM10 right now and flashed it directly on stock LRQ ICS with Speedmod kernel.

jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?

Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.

Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
You can find those additional files in the same link
Scroll down few posts and you can find it

jeetu1981 said:
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Click to expand...
Click to collapse
I got it to work for Odin I added the Kernal Hydra do I just press Flash Firmware ? Please REply ASAP

rajsekhar.300 said:
You can find those additional files in the same link
Scroll down few posts and you can find it
Click to expand...
Click to collapse
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?

Georific said:
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Click to expand...
Click to collapse
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all

bad or good...
jeetu1981 said:
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
Click to expand...
Click to collapse
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!

Georific said:
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Click to expand...
Click to collapse
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.

its works
jeetu1981 said:
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
Click to expand...
Click to collapse
The full wipe worked thanks so much man appreciate it for everything

4.1.2 ZSLM5 kernel and rooting

Can I root this version:
N7000ZSLM5_N7000OZSLM5_TGY
With superSU-busybox-installer?
And after that I can use to access CWM features Philz-cwm?
If rooted, will I be able to flash hydracore?

provettirodolfo said:
Can I root this version:
N7000ZSLM5_N7000OZSLM5_TGY
With superSU-busybox-installer?
And after that I can use to access CWM features Philz-cwm?
If rooted, will I be able to flash hydracore?
Click to expand...
Click to collapse
You just need to download PhilZ ZSLM5 kernel, reboot into stock recovery, flash kernel, then restart device. And thats it, you are safe and rooted all in one. (follow instructions in OP of Philz thread, everything is explained)
After that, dont flash any kernel please, you will have problems, Hydracore is ICS kernel, and it will not work properly on your ZSLM5 rom.
For now, the best one is PhilZ kernel

You can directly root with Philz LM5 kernel.. just flash it using stock recovery and you will get root and CWM.. no you cannot use hydracore on JB TW rom

Can you provide links to this kernel?
Sent from my GT-N7000 using xda app-developers app

Yeah
http://lmgtfy.com/?q=Philz+kernel+galaxy+note

hello everyone,
I installed N7000XXLSZ for Germany whit Odin, can I use the same kernel+cwm+root from philz for XSLM5 or do I have to wait for the specific?
Thanks in advance

goroth89 said:
hello everyone,
I installed N7000XXLSZ for Germany whit Odin, can I use the same kernel+cwm+root from philz for XSLM5 or do I have to wait for the specific?
Thanks in advance
Click to expand...
Click to collapse
+1

till now all all JB kernels worked for all JB except (LS2 and Ls7).. so you could try one.. if any issues, you could install the rom.

for lonessm
nokiamodeln91 said:
till now all all JB kernels worked for all JB except (LS2 and Ls7).. so you could try one.. if any issues, you could install the rom.
Click to expand...
Click to collapse
Thanks, I'm going to try and let you know
edit: It works

goroth89 said:
Thanks, I'm going to try and let you know
edit: It works
Click to expand...
Click to collapse
can you link to the exact speedmod kernel that you used
would like to get it a try

No SpeedMod.. Philz Kernel LM5
---------- Post added at 06:59 PM ---------- Previous post was at 06:57 PM ----------
goroth89 said:
edit: It works
Click to expand...
Click to collapse
Yes there are roms already with LM5 kernel included

ilegales said:
can you link to the exact speedmod kernel that you used
would like to get it a try
Click to expand...
Click to collapse
from philz thread I used ww*.mediafire.com/file/ad7fze2wx7m4wi0/PhilZ-cwm6-ZSLM5-OZS-4.35-signed.zip
flashed from stock recovery.

[Resolved] Stock 4.1.2 Root & ROM

Hi
Just got my N7000 back from service; With just about all the hardware except the screen were replaced, it also returned running the stock ROM (Android 4.1.2, kernel version 3.0.31-1103517, build JZ054K.N7000XXLT5). While the stock Jelly Bean is miles ahead of both the original Gingerbread ROM and the stock ICS ROM, I'd rather root and go back to the CyanogenMod nightlies...
Thing is, between all the "Super Brick" and "eMMC" bugs - I'm a bit scared and terribly confused with witch technique I should use to root and ROM my phone. It sure would be nice if someone could point me to a tried and tested method (preferably a step by step guide) to root and ROM my N7000XXLT5...

Root using Philz kernel. Then you can flash the rom of you choice. For instructions, head over to his thread in the original android development section.
Sent from my GT-I9500 using xda premium

Thanks nokiamodeln91!
I assume you're referring to [PhilZ-cwm6][n7000]. I've looked at this earlier. I've settled on and are comfortable flashing it using the stock recovery method, and the step by step guide (in post #3 of the PhilZ-cwm6 thread) should make this manageable enough...
The problem however is that I'm unsure as to which package/version to download. I've looked at the "What kernel to choose section" in post #2 of the PhilZ-cwm6 thread, but from that information I cannot figure out which kernel matches/is suitable for my device...
As I said, I'm terribly confused by all this...

You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium

nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Click to expand...
Click to collapse
Thanks again! I've downloaded "PhilZ-cwm6-XXLT5-OXX-5.03.0-signed.zip" and are ready to root/rom my phone!
I guess it freaks me out not knowing/understanding everything. Especially about something as fundamental as the bootloader/OS of my phone. It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it. Also kind of freaks me out that I'm not supposed to use the latest version of a piece of software....
Though, I've had it with the stock rom again and are ready to take my chances! So again; Thank you!

@nokiamodeln91; Just wanted to say thank you!
Rooting with "Philz kernel" is quite possibly the easiest root I've performed. Once I were sure which version/variant to download is nothing to worry about.
So now I'm back to being a happy N7000 user running CyanogenMOD! Only difference being that I'm back to nightlies...
Again; Thanks!

vidvandre said:
It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it.
Click to expand...
Click to collapse
Those are world regions and release dates

Same problem
nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace

Razgrizzz said:
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace
Click to expand...
Click to collapse
Try to XXLTA version.

Found The XXLT9
nokiamodeln91 said:
Try to XXLTA version.
Click to expand...
Click to collapse
In the mean time I managed to find the XXLT9 but when I tried to install it it s giving me a Signature Verification Failed error. Any ideas?

Use XXLTA

User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Ok Thanks will try that tonight
Thanks a lot for your help guys

User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Hi guys I finaly had some time to try the XXLTA but stil giving me a Signature Verification Failed error!
I downloaded the xxla from here: d-h.st/users/philz_touch/?fld_id=25295#files
and do you know somthing about these files?
goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/
Thanks in advance

Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.

nokiamodeln91 said:
Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.
Click to expand...
Click to collapse
Thank you all Guys it worked

How to install Recovery (CWM / TWRP) ??

Doesn't find any source.
Thanks

williamlaw said:
Doesn't find any source.
Thanks
Click to expand...
Click to collapse
JB or GB? This is temporary CWM for JB http://forum.xda-developers.com/showthread.php?t=1987313. If you want permanent CWM,you must flash CoCore kernel.

phyowaiummg said:
JB or GB? This is temporary CWM for JB http://forum.xda-developers.com/showthread.php?t=1987313. If you want permanent CWM,you must flash CoCore kernel.
Click to expand...
Click to collapse
CWM / TWRP will be flashed after flashed CoCo Kernel ??

'Cocore' ..and YES!

williamlaw said:
CWM / TWRP will be flashed after flashed CoCo Kernel ??
Click to expand...
Click to collapse
Yes,CoCore kernel has built in CWM or TWRP. Only for JB.
Sent from my GT-I9070 using xda premium

phyowaiummg said:
Yes,CoCore kernel has built in CWM or TWRP. Only for JB.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Thanks man !

Is CoCore kernel compatible with Android v4.3? I'm on v4.1.2 & planning to upgrade to Android v4.3, but need to find ways to do a Nandroid & be able to run recovery if the upgrade fail or causes a lot of FCs. TQ.

xbean said:
Is CoCore kernel compatible with Android v4.3? I'm on v4.1.2 & planning to upgrade to Android v4.3, but need to find ways to do a Nandroid & be able to run recovery if the upgrade fail or causes a lot of FCs. TQ.
Click to expand...
Click to collapse
We have CM 10.2 based ROMs with that version of Android. And those ROMs has its own kernel that has features of CoCore and ofcourse CWM recovery (except OMNI ROM that has TWRP). And those ROMs you can install without CWM/TWRP, you will have it after installation.
And if you want to go back from CM10.2+ ROM you need to flash stock or to repartition /preload partition - http://forum.xda-developers.com/showthread.php?t=2612540

Unable to Install Permanent CWM or TWRP on Galaxy S Advance I9070
Hello All.. M new on xda.. I m using Galaxy S Advance (DDULP8) I9070 Rooted..I want to update my mobile to 4.4.2 from 4.1.2. I tried hard to install permanent CWM / TWRP on my galaxy s advance. But unable to install :crying:. So provide me the easy way to install CWM / TWRP on my mobile.
I only can install Temporary CWM. Plz tell me that can i update my Galaxy S advance (ddulp8) to CM 11 thru Temporay CWM..Or plz provide me Step by step easy method to install permanent CWM / TWRP...Thnx in Advance

sandeep0229 said:
Hello All.. M new on xda.. I m using Galaxy S Advance (DDULP8) I9070 Rooted..I want to update my mobile to 4.4.2 from 4.1.2. I tried hard to install permanent CWM / TWRP on my galaxy s advance. But unable to install :crying:. So provide me the easy way to install CWM / TWRP on my mobile.
I only can install Temporary CWM. Plz tell me that can i update my Galaxy S advance (ddulp8) to CM 11 thru Temporay CWM..Or plz provide me Step by step easy method to install permanent CWM / TWRP...Thnx in Advance
Click to expand...
Click to collapse
Flash cocore kernel using frapeti's tool. And you get a permanent recovery. Then flash cm 11 and gapps for 4.4.2

method
szzlgupta said:
Flash cocore kernel using frapeti's tool. And you get a permanent recovery. Then flash cm 11 and gapps for 4.4.2
Click to expand...
Click to collapse
Plz provide the link also..m really thanksfull to you..

sandeep0229 said:
Plz provide the link also..m really thanksfull to you..
Click to expand...
Click to collapse
Universal kernel flash tool
[Kernel][Feb 16] CoCore-E 9.0
CM11 ROM from Team Canjica - WIP
GApps for CM11/KK

link
szzlgupta said:
Flash cocore kernel using frapeti's tool. And you get a permanent recovery. Then flash cm 11 and gapps for 4.4.2
Click to expand...
Click to collapse
Dear Sir,
Plz provide me the link of cocore kernel for rooted galaxy s advance 4.1.2 (ddulp8). Thnx in advance

sandeep0229 said:
Dear Sir,
Plz provide me the link of cocore kernel for rooted galaxy s advance 4.1.2 (ddulp8). Thnx in advance
Click to expand...
Click to collapse
I've just put the necessary links in the post above. Have you read it?

which one
R_a_z_v_a_n said:
Universal kernel flash tool
[Kernel][Feb 16] CoCore-E 9.0
CM11 ROM from Team Canjica - WIP
GApps for CM11/KK
Click to expand...
Click to collapse
Sir, I had open your link, but there are 3 type of version of cocore.
(CoCore-E-9.0-CWM.zip - [Click for QR Code] (8.57 MB, 593 views)
File Type: zip CoCore-E-9.0-CWM-Touch.zip - [Click for QR Code] (8.70 MB, 302 views)
File Type: zip CoCore-E-9.0-TWRP.zip - [Click for QR Code] (9.96 MB, 346 views)
which 1 i can download

sandeep0229 said:
Sir, I had open your link, but there are 3 type of version of cocore.
(CoCore-E-9.0-CWM.zip - [Click for QR Code] (8.57 MB, 593 views)
File Type: zip CoCore-E-9.0-CWM-Touch.zip - [Click for QR Code] (8.70 MB, 302 views)
File Type: zip CoCore-E-9.0-TWRP.zip - [Click for QR Code] (9.96 MB, 346 views)
which 1 i can download
Click to expand...
Click to collapse
You can download any. First is the normal cwm. Second is the cwm with touch and the third one is twrp recovery.

Bestest Custom Rom For Galaxy S Advance
szzlgupta said:
You can download any. First is the normal cwm. Second is the cwm with touch and the third one is twrp recovery.
Click to expand...
Click to collapse
@ szzlgupta & ALL :- Really Thnx 2 all of uh.. I successfully installed CWM & CM 11 on my Galaxy S Advance
Now 1 question more..Plz tell me which one is bestest rom for Galaxy S Advance m using CM11 (Maclaw) Version. Plz provide me step & Link of the bestest custom rom..Tnx in advance

sandeep0229 said:
@ szzlgupta & ALL :- Really Thnx 2 all of uh.. I successfully installed CWM & CM 11 on my Galaxy S Advance
Now 1 question more..Plz tell me which one is bestest rom for Galaxy S Advance m using CM11 (Maclaw) Version. Plz provide me step & Link of the bestest custom rom..Tnx in advance
Click to expand...
Click to collapse
Forum rules do not allow threads about best ROMs.
If you are happy with CM11, good. If not try the other ROMs and find out which is the best for you.

CM11 Hangs
rog_star said:
Forum rules do not allow threads about best ROMs.
If you are happy with CM11, good. If not try the other ROMs and find out which is the best for you.
Click to expand...
Click to collapse
Recently i had installed CM11 custom rom on my Galaxy S Advance. After installing my mobile hangs some time. Some time Gallery, youtube, music player works very slow. Now i want to revert back to stock firmware. Plz guide me how to restore my device to stock firmware. I have Last Stock firmware CWM Backup which i backup before updating to CM11 & Stock firmware zip file every thing. plz advice me which method is the best for revert back to stock firmware. Thnx in Advance

sandeep0229 said:
Recently i had installed CM11 custom rom on my Galaxy S Advance. After installing my mobile hangs some time. Some time Gallery, youtube, music player works very slow. Now i want to revert back to stock firmware. Plz guide me how to restore my device to stock firmware. I have Last Stock firmware CWM Backup which i backup before updating to CM11 & Stock firmware zip file every thing. plz advice me which method is the best for revert back to stock firmware. Thnx in Advance
Click to expand...
Click to collapse
Just flash Stock Rom with Odin. And then restore your Backup.