Greetings from Colombia. The post I translated with Google translator because not speak English. Hope is not a big problem and I hope I helped. Thanks again.
My problem is this. I have an Xperia X8 (E15i - 11w13) and a few days ago I returned my Xperia X8 to PC COMPANION Stock (Stock Firmware and Kernel) Then using the ROM: rDroid (The best ROM for me)
With my phone in stock. Decides to Flashing ...
+ Then I ROOT my phone with flashtool. All good up there.
+ I decided to install the xRecovery as always and installed (Copying 3 files to System / Bin with RootExplorer)
Restart .. And no, it did not work.
- Investigate and maybe he problem was the permissions. I repeated the process, modify permissions ... And no, it did not work
- Maybe it was the Busybox?. I repeated the process after installing Busybox from the Android Market ... And nothing
- So I thought ... and it decided to install the xRecovery Flashtool, I did and .. It worked!
Already with the xRecovery working and the new ROM on SD Card, decided Flashing.
+ Realize what Wipes and install the ROM ... There all good
+But when the cell lit New ROM test, shoot me Restarts every 10min, with a message in the notification bar that says: "It is safe to remove the SD"
+Or failed the internet or in the Market / Play Store (would not let me download any APP)
+Or And there did not return to take the ROM .. It was stuck on the logo of SONY
+Or And Not even let me enter the xRecovery
Then I play do ... TOTAL STOCK Back to PC Companion.
I returned to Perform ROOT process, Xrecovery (with Flashtool) ... All to Flash the ROM withthe rDroid Cel (The one I was using before the problem and it works excellent)
But what ... Again the same problem. The constant pulling reboot message "Safe to remove the SD"
So when I went back to try to get the xRecovery .. He returned and stayed stuck in the Logo of SE.
And I got to re-do?... Make PC STOCK TOTAL COMPANION :crying:
¡HELP ME!
hi. i understand that you don't speak english, and thanks for the effort in using translate, but i'm afraid i'm not sure i understand. are you experiencing a soft brick now? or is the sdcard error the issue?
if you have a soft brick (stuck in sony logo), try using seus instead of pcc if pcc doesn't work.
if you're experiencing the sdcard issue, backup your sdcard and reformat it. also, install cwm instead of xrecovery as some roms apparently do not support xrecov (i have not experienced it though).
also, are you on stock kernel? i'm not familiar with the rom you're using. or is your bootloader unlocked and you have a custom kernel? and what is the new rom you're trying to use?
Just because i don't doesn't mean i can't.
Just helping
if u want to fix the booloop (stuck at sony logo)
just flash the original firmware by flash tool
download here
and if u want to install custom rom
- Flash the kernel
- Full Wipe (dalvik cache and batery stats)
- Factory Reset
- Install ROM
cascabel said:
hi. i understand that you don't speak english, and thanks for the effort in using translate, but i'm afraid i'm not sure i understand. are you experiencing a soft brick now? or is the sdcard error the issue?
if you have a soft brick (stuck in sony logo), try using seus instead of pcc if pcc doesn't work.
if you're experiencing the sdcard issue, backup your sdcard and reformat it. also, install cwm instead of xrecovery as some roms apparently do not support xrecov (i have not experienced it though).
also, are you on stock kernel? i'm not familiar with the rom you're using. or is your bootloader unlocked and you have a custom kernel? and what is the new rom you're trying to use?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Hello. Thanks for answering Cascabel.
But I had no brick problem, or soft or hard.
The phone works normally with the Stock ROM, but with a Custom ROM works but has problems (the same problem throughout the ROM I try)
Buy a New SD card (8GB Kingston) to see if the problem was on the sd card. And it still has the same problem with the new card
DanielCuellarP said:
Hello. Thanks for answering Cascabel.
But I had no brick problem, or soft or hard.
The phone works normally with the Stock ROM, but with a Custom ROM works but has problems (the same problem throughout the ROM I try)
Buy a New SD card (8GB Kingston) to see if the problem was on the sd card. And it still has the same problem with the new card
Click to expand...
Click to collapse
Are you getting that problem on stock rom (2.1) ?
WrongType said:
Are you getting that problem on stock rom (2.1) ?
Click to expand...
Click to collapse
No. With STOCK ROM works perfectly, without any fail.
DanielCuellarP said:
No. With STOCK ROM works perfectly, without any fail.
Click to expand...
Click to collapse
what ROM did you use? "Safe to remove SD" was a known bug in early days of Froyo/GB.
-HuntDX- said:
what ROM did you use? "Safe to remove SD" was a known bug in early days of Froyo/GB.
Click to expand...
Click to collapse
Good news, for now...
Thanks for your answers. Yesterday test a ROM (Xperia SOUL Engine Generation4) And so far not filed failures..
The problem of "Safe to remove SD" I had in GB (ROM android 2.3.5)
+I have to test what the Xrecovery. See if I work or if I presented another problem (When using xRecovery, pressing the back key and the phone would not start and it stuck in the logo of Sony Ericsson)
DanielCuellarP said:
Good news, for now...
Thanks for your answers. Yesterday test a ROM (Xperia SOUL Engine Generation4) And so far not filed failures..
The problem of "Safe to remove SD" I had in GB (ROM android 2.3.5)
+I have to test what the Xrecovery. See if I work or if I presented another problem (When using xRecovery, pressing the back key and the phone would not start and it stuck in the logo of Sony Ericsson)
Click to expand...
Click to collapse
You don't test or mess xrecovery if you are in custom rom. You'll soft brick even you can boot up to xrecovery and xrec uses amend scripting so CWM in custom rom is the best. Xrec uses busybox and all custom rom can't update busybox.
Sent from my GT-S5360 using Tapatalk 2
Just use CWM
Sent from my E15i using xda app-developers app
Related
Hye all!
Sorry for NOOB question,
btw i facing a problem while flashing a new rom which is cause my x8 brick
inb4 i already make a backup and store my original rom
during flashing a new rom,im using xrec and install through update.zip
and after complete its show install kernel (which is i never done before)
im a bit confused
after that i try to full wipe and when i try to reboot but its failed.
since i look my x8 seems to be lag for quite long,
i removed the battery and then when i start it again se logo appear.
and stuck there (even i couldn't enter xrec again )
do help me guysssssssssss
21th century apes said:
Hye all!
Sorry for NOOB question,
btw i facing a problem while flashing a new rom which is cause my x8 brick
inb4 i already make a backup and store my original rom
during flashing a new rom,im using xrec and install through update.zip
and after complete its show install kernel (which is i never done before)
im a bit confused
after that i try to full wipe and when i try to reboot but its failed.
since i look my x8 seems to be lag for quite long,
i removed the battery and then when i start it again se logo appear.
and stuck there (even i couldn't enter xrec again )
do help me guysssssssssss
Click to expand...
Click to collapse
wat rom u installed?
neways use this http://forum.xda-developers.com/showthread.php?t=1011071
It seems the best choice is using pc companion for x8 to restore the eclair (for beginner).
Or using flashtool if u know how to use it.
Sent from my Android using Tapatalk
21th century apes said:
Hye all!
Sorry for NOOB question,
btw i facing a problem while flashing a new rom which is cause my x8 brick
inb4 i already make a backup and store my original rom
during flashing a new rom,im using xrec and install through update.zip
and after complete its show install kernel (which is i never done before)
im a bit confused
after that i try to full wipe and when i try to reboot but its failed.
since i look my x8 seems to be lag for quite long,
i removed the battery and then when i start it again se logo appear.
and stuck there (even i couldn't enter xrec again )
do help me guysssssssssss
Click to expand...
Click to collapse
MiniCm7 by nobodyatall? To install this ROMs you need to install the aNa Kernel first! To install this Kernel, you need to unlock the bootloader first! Read the instructions carefully next time!
Flash back to stock ROMs either using flashtool or PCC!
@21st century Apes............Mee tooo went through exactly the same problem...
but i manage to bring back my x8 to normal...using flashtool...
u can give it a try it will 100% work
All the Best
hi all i just got back my w8 and i rooted it and xrecovery it using flashtool ...i tried to flash gingercruzt 8.4 but it says
E/cant open /sdcard/GC84.zip (bad) aborted
any help?
q:what version of ur xrecovery?
q:had u try flashing the other rom?
i think u need to root ur phone using superoneclick tool..
tohno said:
hi all i just got back my w8 and i rooted it and xrecovery it using flashtool ...i tried to flash gingercruzt 8.4 but it says
E/cant open /sdcard/GC84.zip (bad) aborted
any help?
Click to expand...
Click to collapse
The error message and related problem is written right there in front of your nose:
The ZIP file on your SD card does not seem to be ok. Bad download or corrupted while copying onto the SD.
EDIT: If you want to make sure that a large file got copied correctly to the SD (assuming the file you downloaded is ok):
1. Get HashTool
2. Start HashTool, make sure at least "MD5" is checked and drop the ZIP onto the program window.
3. Save the MD5 hash as a .txt file
4. Mount the phone in USB storage mode
5. Copy the ZIP
6. Drop the ZIP you copied onto the SD onto Hashtool and make sure the MD5 matches.
If the MD5 does not match, then the file on the SD is damaged. Turn off the phone, take out the SD and put it into a card reader. Delete the ZIP, copy anew, recheck the MD5. If it's ok now give it a try ... and research a possible problem with the Android drivers on your computer later on.
If it should turn out that the file is also damaged on your computer ... either the download broke (pay close attention to make sure the file came in completely) or you have a funny problem with your hard drive or file system integrity.
belacker said:
q:what version of ur xrecovery?
Click to expand...
Click to collapse
Flashtool installs the one-and-only correct 0.1 xRecovery version for the X8/W8.
belacker said:
i think u need to root ur phone using superoneclick tool..
Click to expand...
Click to collapse
You know, that statement is plain bulls***. Flashtool uses the very same rooting methods as SuperOneClick.
k done...i used a format tool to format my sd card...but now my ginger xperia keeps on RESTARTING!!
tohno said:
k done...i used a format tool to format my sd card...but now my ginger xperia keeps on RESTARTING!!
Click to expand...
Click to collapse
TRy another rom and see what is gonna be
tohno said:
k done...i used a format tool to format my sd card...but now my ginger xperia keeps on RESTARTING!!
Click to expand...
Click to collapse
Correct - try another ROM or re-flash GingerXperia.
See the edit in my post above about how to make sure that the ZIP got copied correctly.
B.Jay said:
Correct - try another ROM or re-flash GingerXperia.
See the edit in my post above about how to make sure that the ZIP got copied correctly.
Click to expand...
Click to collapse
Well it might not be zip ...it maybe just some error through installation...
dsaklein said:
Well it might not be zip ...it maybe just some error through installation...
Click to expand...
Click to collapse
It's tohno we're talking about - better take every possible problem into conclusion
*pats tohno on the shoulder*
B.Jay said:
It's tohno we're talking about - better take every possible problem into conclusion
*pats tohno on the shoulder*
Click to expand...
Click to collapse
Well, we will see....since he started two threads with almost the same problem...
dsaklein said:
Well, we will see....since he started two threads with almost the same problem...
Click to expand...
Click to collapse
Then you know what I meant
[/facebook-ish chat mode]
ARRRGG!! my phone still restarts every now and then even with GDX ...i think this has to do with something with usb storage ...HOLY CRAP I AM A FREAKING MAGNET FOR PROBLEMS!! repaired twice and 1st day of having my phone back i got a ton of problems...SHIII
tohno said:
ARRRGG!! my phone still restarts every now and then even with GDX ...i think this has to do with something with usb storage ...HOLY CRAP I AM A FREAKING MAGNET FOR PROBLEMS!! repaired twice and 1st day of having my phone back i got a ton of problems...SHIII
Click to expand...
Click to collapse
Repair it using PCC and start all over again, but this time use super1click for rooting your phone and x8toolbox for install CWM and xRecovery
Or try to pull out battery for couple minutes and see if problem still persist, than start your phone without sdcard inside, maybe you sdcard causing it
so far ok ...but it restarted bout 10 mins ago...i scare it happen again..i really hope not, the last time i serviced my phone is caused the sd card problem
I'm going slightly mad....
I've tried all possibilities, but with no use.
Everything went bad, when i unlocked bootloader, and (tried) flashed nAa kernel to use new rom's for my X8. SEMC unlocked bootloader, rooted phone, everything went fine, but... First my phone was stuck on nAa kernel screen after flashing (it said succesfully) nAa kernel and latest cm rom based on nAa kernel. Since than, i tried 10 different nAa based rom's, flashed alfs kernel succesfully and alfs based rom's, stock kernel and stock rom, and than old rom's which worked flawlessly (on stock kernel), relocked bootloader, booted without sd card, everything. But only combo which works is flashed stock kernel and stock rom 2.1.1. Why? What has been gone wrong that now even old rom's based on stock kernel aren't working? Problem with every rom and kernel combo now is that after s.e. (or if i use custom kernel - their logo), goes custom rom logo and than mobile reboots itself and goes all over again - s.e. logo, custom rom logo, and reboot. Left mobile for hours - same thing. Only when i install stock kernel and stock rom (together in one .ftf file), everything works fine. Now phone is with relocked bootloader, rooted, and on stock rom, with everything working correct. But wont let me flash any custom rom, and i don't wanna use phone like this, because nothing is like i'm used to be (i used mostly gingerdx or gingerxperia rom's).
Please help!!
I flashed the latest official firmware...
Than after all my attempts i can't install any ROM, except official 2.1.
Please, write me instructions how to install CM7 - i need help...
I have rooted 2.1 with xRecovery - what's next?
Go to xrecrovery choose instal custom zip from sd card hoose zip from sd card find your mini cm 7 install rom and factory reset/full wipe.
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Bolussimo said:
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Click to expand...
Click to collapse
Also, some ROM required CWM instead of Xrecovery, so read carefully before attempting anything.
Hmmmm
I unlocked bootloader long time ago(10WW48 on the sticker).
to przemek4113: Just installing from xrecovery gives me a unbooting phone.
I tried Froyo, but it doesn't boot too.
Then i'm flashing(Xrecovery doesn't give me a booting phone even if i recover all system) official 2.1.
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
May be try Previous versions of GingerDX?
Really, i tried about seven customs...
P.S. I'm installing xrecovery ROM's from Xrecovery and CWM ROM's from CWM...
BEaStia said:
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
Click to expand...
Click to collapse
Mind to elaborate where you read that "latest versions need new kernels"?
GingerDX runs on STOCK KERNEL, LinuxDX as well as Alfs. I fail to find the part in doixanh's post where it says something about forcing a certain kernel to be used.
Make sure you have an older x8 than 11w29, its under the battery. When the number is 11w29 or newer, you'll not get CM. Unlock your bootloader.
Download and flash FXP kernel. Install official CM with the kernel built-in CWM. I recommend to flash nAa kernel after install the CM, it's much better.
Sent from my E15i using xda premium
If you want CM7 you should go to this thread...http://forum.xda-developers.com/showthread.php?t=1362585
That's my fault - i was speaking about another ROM. Not GingerDX - but it doesn't boot too.
I followed advise about miniCM7.
Flashed kernel ->then wiped all(i disliked the message about ext4 - there's no this partition - probably that's the problem???) ->installed ROM. Nothing.
"nAa kernel" logo appears and then it reboots.
UPD:
I've installed GingerXperia(v19) via CWM.
Then -
I've flashed all kernel,fota and smth else(not all files from 2.1.1).
Then it booted...strange)
But i'll try to work with other kernels...
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
sreeramllb said:
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
Click to expand...
Click to collapse
Probably:
1)make a backup of all data
2)flash stock kernel
2.5)wipe
3)install custom
3.5)wipe
4)recover data
?
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
sreeramllb said:
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
Click to expand...
Click to collapse
Flash Tool - I've seen links on it thousand times on 4pda.ru, but not here - i suppose it to be in the branch about X10.
http://www.mediafire.com/?z7fmpiragbbdxdu - here is flasher.
http://depositfiles.com/files/c2gllgt6t - or here, with official firmware
It would be great if somebody could provide the step by step procedure of flashing my w8 to get past the se logo....
1)Download all archives above
2)Run flasher
3)Press "Flash" and choose necessary firmware
4)follow advices of software
5)reboot -> You have official 2.1
then
1)check your bootloader(http://4pda.ru/forum/dl/post/1227710/S1tool.7z) with this tool
2)unlock it if it is able for you
3)take root(superoneclick with debugging)
4)make xrecovery
5)install any xrecovery zip
or
alt 5)make CWM
alt 6)install any CWM zip
or
install kernel
then install zip
Firstly try it from xrecovery. If you have some problems - write PM to me)
I have done it and successfully flashed as per flashtool...but now even i cant boot stuck at "sony ericsson" now the animated logo works and reboots automatically...pls help
Have you done "user-wipe" in Flash Tool???
Here is from friendly branchcontains a collection of GingerDX 013-022 and some other goodies in the "Sony Ericsson" folder - i.e. Basebands, PCC, SEUS, Flashtool)
http://www.mediafire.com/?eca0sualnao4c4c
Thanks to B.Jay
Atlast with full user data wipe in flash tool I recoverd my phone...THANKS A LOT!!!
Again rooted,Xrecovery and installed GX V24b-I would like to know how to enable multi touch in it please?
How to make xperia x8 able multi touch.
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
chehady said:
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
Click to expand...
Click to collapse
Ok here is a nice way how to enable it hope it helps you
http://forum.xda-developers.com/showthread.php?t=1135965
Sent from my E15i using XDA App
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
which ROm are you trying to install? Please provide more info on your problem, so we could help you better
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
There are some problem that causes custom rom cannot boot. I will state the problem but, you gonna go search it for yourself.
1.Busybox not correctly installed
2.Root incorrectly
3.Baseband incompatible
4.Rom need custom kernel to work (Extra care.)
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
Also THE MAIN ONE make sure usb debugging is enabled
I do that all the time when i trying..
I do this for some times..5 or 6..whit different rooms. all the time stucks at sony logo and i can't enter in xRec or CWM..i restore it whit seus
przemek4113 said:
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
Click to expand...
Click to collapse
I do that all the time when i trying..
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I do that..for 5 or 6 times..it fails!
tujamo1 said:
I do that..for 5 or 6 times..it fails!
Click to expand...
Click to collapse
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
A little stupid hint...
Are you sure you are stuck at se logo? I mean, have you wait enough? Sometimes it gets up to 5 min to start and especially first time...
Sent from my E15i using xda premium
I think I understand you problem here
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
so as mine can any one know how to upgrade 11W42
it is probably the fact you need custom kernel. But before trying to unlock bootloader, turn phone off,, take back cover and battery off and check your phones date ie
10w56 or 11w34 etc
Sent from my X8 using XDA App
sambavadekar said:
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Click to expand...
Click to collapse
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
CKKnot said:
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
Click to expand...
Click to collapse
Thant's man. It work!
wilbso said:
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I'm do this all the time when i flash a new rom. But a had make my phone work. Thanks anyway!
samu1player said:
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
Click to expand...
Click to collapse
My baseband ends with .......15
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
in CWM wipe cache and dalvk cache
if phone doesnt boot flash v29 back and create backup
than flash 31b,wipe data/cache and advance restore data from backup created earlier...wipe cache again
good luck
and post questions in Q/A section
fotak-x said:
in CWM wipe cache and dalvk cache
Click to expand...
Click to collapse
Unfortunately I'm stuck at the Sony Ericsson screen and can't get to CWM...
Thanks though.
(Can a moderator move this to the right forum if this is the wrong one?)
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
"sony ericsson" logo on boot...thats stock kernel
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
pgd80 said:
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Titan9119 said:
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think I did (as part of the v029 install (or maybe it was the v030 install - I can't even remember which one of those I was on)), but I can't say for sure. I definitely didn't when I tried to update to v031b. I just ran the .zip and when I got the confirmation of success I rebooted. Haven't got passed the Sony Ericsson logo since.
CnC-ROCK said:
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Click to expand...
Click to collapse
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
pgd80 said:
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
Click to expand...
Click to collapse
you have unlocked bootloader? if so then flash custom kernel and it will boot fine.
you can use adb to backup your apps or flash back the previous version and backup them.
you might have downloaded the rom that was not for stock kernel.
your phone is soft bricked, can be repaired using sony pc companion.
Look for a thread to repair a soft bricked phone.
its so easy..
i am stuck for 2 day. i do for many way for disolve my problem. stuck in logo sony, because i wipe, and i dont install new/custom kernel.
i want install jelly bean
many flash i tried cannot fix this problem
for last step, i download latest "pc companion"
and i follow step by step.
fail and try. error and try.
failed connect and i try..
(i forget my capacity baterries is low)
and bla bla bla....... pc companion can fix this problem
with factory kernel
and factory os: "ENCLAIR" KKKKKKKK
ending of stories ... i install again with rom ginger
i hope can solve your problem
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
x8bricked said:
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
Click to expand...
Click to collapse
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
sent using internet explorer, hope it reaches on time :fingers-crossed:
my phone is only nt getting detected in sony pc companion
x8bricked said:
my phone is only nt getting detected in sony pc companion
Click to expand...
Click to collapse
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Gogeta said:
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
flash tool is aborting with error msg
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
Gogeta said:
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
i tried it bt still my device is nt properly installed plz help
Click to expand...
Click to collapse