Database Develop

Flashing RUU after S-OFF

Hi everyone,
Got my 3 branded HTC One S-Offed today, with the aim of getting the stock cid HTC__001 ROM on there so I can get OTA update ON TIME (Yup, Three still haven't released the 1.29 update)
So my CID's been changed to HTC__001 and flashed the RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe RUU
All went smooth and all the bloatware disappeared, however my software version is still showing as 1.28.771.6 which is the Three ROM software version, which is why i'm guessing it's still not shoiwng any OTA updates available?
Tried flashing again with SuperCID instead and when flashing this tume the RUU utility showed my phone's software version as 1.28.401 like it should have been, however flashed again and same thing, software version still showing up 1.28.771.6!
Feel as though i'm missing something stupid if anyone can help please!

You have to change more than your cid in bootloader it appears twice if not 3 times go read supercid thread in development section
Sent from my HTC One using XDA Premium HD app

ac3kill said:
You have to change more than your cid in bootloader it appears twice if not 3 times go read supercid thread in development section
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Aah thanks mate, i'll have a look

ac3kill said:
You have to change more than your cid in bootloader it appears twice if not 3 times go read supercid thread in development section
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Checked it out, my HTC One is showing HTC__001 as CID with the getprop "ro.cid" command also without having to do anything, so in all three places my CID is correct, am I missing something else?

Sorted this by the way, extracted the rom.zip from the RUU and flashed manually through fastboot, now working!

jinx27 said:
Sorted this by the way, extracted the rom.zip from the RUU and flashed manually through fastboot, now working!
Click to expand...
Click to collapse
that will install the rom, but doesnt flash the firmware.

c5satellite2 said:
that will install the rom, but doesnt flash the firmware.
Click to expand...
Click to collapse
The radio seems to be the right version now as well? I think I may just run the RUU exe over this again to make sure

This is exactly what i want to do. I have a HTC One from from 3 and want to debrand and go to a stock rom. Have you recieved an OTA update since you have done this? Or are you still on 1.28.401.7 that you flashed?

cptblackgb said:
This is exactly what i want to do. I have a HTC One from from 3 and want to debrand and go to a stock rom. Have you recieved an OTA update since you have done this? Or are you still on 1.28.401.7 that you flashed?
Click to expand...
Click to collapse
+1
Sent from my HTC One using XDA Premium HD app

ac3kill said:
+1
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Finally managed to get it working after a bit of messing around, OTA came straight through! Installed fine as well. It's taken a day but I've got there, an OTA update at last lol. Let me know if you need any help

I'm locked, s-off, after check with command getprop. My cid 11111111.. if I flash RUU.. my recovery will lost?
Sent from my HTC One using Tapatalk 2

iamaniff said:
I'm locked, s-off, after check with command getprop. My cid 11111111.. if I flash RUU.. my recovery will lost?
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Yeah, the RUU set's everything back to stock, including recovery

You do NOT need to change all Cid locations for RUU and OTA's. Just the Fastboot one is sufficient. I just tested RUU and OTA and it works fine. You can RUU without even re locking the bootloader with supercid, but to install an OTA you will have to relock bootloader and change cid from 11111111 to whatever carrier you are trying to OTA. I personally have an ATT CWS__001, changed CID to 11111111 with fastboot oem writecid 11111111. (get prop cid is still CWS__001) Ran older Dev edition ruu, installed fine without locking or changing cid. Booted and system Downloaded OTA, of course wouldnt install due to improper system files. Fastboot oem lock and fastboot oem write cid BS_US001 was all i needed to successfully install the OTA. NO HEX EDIT needed.

I see you are on 3, is that in the UK? ... I'm curious that's all as mine is a sim free one and I wondered, when it comes to the 4.2.2 update, will a sim free user get the update at a different time to someone who has a carrier branded phone? I'm on Tesco and just wondered if I'll get the update when they decide to send it to my phone, or will it work differently seeing as I bought the phone sim free?

AllAboutTheCore said:
I see you are on 3, is that in the UK? ... I'm curious that's all as mine is a sim free one and I wondered, when it comes to the 4.2.2 update, will a sim free user get the update at a different time to someone who has a carrier branded phone? I'm on Tesco and just wondered if I'll get the update when they decide to send it to my phone, or will it work differently seeing as I bought the phone sim free?
Click to expand...
Click to collapse
Yup in the UK, I had a Three branded phone, which officially never even received the 1.29 OTA. If you've got a SIM free phone then it doesn't matter what network your on, you'll get the update same time as the other SIM free phones, it's just branded phones that get updates at different time

jinx27 said:
Yup in the UK, I had a Three branded phone, which officially never even received the 1.29 OTA. If you've got a SIM free phone then it doesn't matter what network your on, you'll get the update same time as the other SIM free phones, it's just branded phones that get updates at different time
Click to expand...
Click to collapse
Ah sound, operators are a ***** lol, glad I opted for sim free, especially as my contract costs me £7.50 a month and the same one, with a contract phone, cost me £25.

c5satellite2 said:
that will install the rom, but doesnt flash the firmware.
Click to expand...
Click to collapse
Yes it does as the ROM.zip in the RUU is the complete file - radio, ROM, fw, the lot
Sent from my Nexus 4 using xda premium

Can you please give a few more details about how you installed ROM.zip through fastboot? I have followed all the steps. S-OFFed, HTC__001 cid but when I install the RUU my version number refuses to change.

mortakos said:
Can you please give a few more details about how you installed ROM.zip through fastboot? I have followed all the steps. S-OFFed, HTC__001 cid but when I install the RUU my version number refuses to change.
Click to expand...
Click to collapse
I'm in the exact same situation but managed to dig a bit more and bumped into this http://www.youtube.com/watch?v=BWqUlTSvr8U
---------- Post added at 09:12 PM ---------- Previous post was at 09:07 PM ----------
I'm also guessing that i need to relock my bootloader to flash this ?

I started with the 3 Branded uk phone. I had an unlocked bootloader and TWRP recovery on it as i was going to go for a custom rom to fix my Bluetooth issues.
But after seeing the original post and realizing s-off was now available this is what i did.
With Bootloader unlocked and recovery still there i S-Off'd the phone and then set my CID to HTC__001
Then i downloaded RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
I ran this as the .exe i downloaded no extracting or anything it was untouched. It installed fine and i double checked the version on the phone once booted and they all matched.
While i was checking version numbers the update for 1.29.401.12 popped up so i installed that straight away.
Bootloader is still unlocked and i am just waiting for the 4.2.2 update now.

Help, Back to stock for repair, cracking me up aarghhhhhh

Hi guys i knew the ins and out of my galaxy S3, but need help with my htc one
I know this is a big ask but having a real bad time trying to get this sorted, but need to get back to stock for new digitizer replacement.
i am running ARHD 11 with unlocked bootloader S-off, latest firmware. and twrp on my UK HTC_001
Is there a full guide to get me back to stock, as i have trawled through the forum and have about 10 tabs with various information but its getting to confusing as to what to do first with out bricking my phone.
i tried to do my stock nandroid backup first but that gave me no touchscreen function, not sure if that's because i have updated to the latest firmware, so had to flash ARHD back to get touchscreen function agian.
i then relocked the bootloader and that wiped my phone so had no system to boot into just cwm recovery. Tried to sideload rom but that didn't work adb error closed.
then i fastboot flash twrp, and then usb otg flashed arhd 11 from usb stick, working agian.
this is doing my head in, been at this for 3 days and getting nowhere
in what order do i go about this to get to full stock without bricking
need to be S-on
locked bootloader
revone locked not relocked
stock uk HTC_001 unbranded rom
unroot.
Big thanks in advance guys if you can help.

You should be able to install a 401 RUU and then
./revone -l
fastboot oem writesecureflag 3

thanks benpope, need a bit more of a guide dude,
not sure what RUU i need, my phone is uk unbranded htc_001
do i fastboot the RUU rom?
revone-l , is to turn relocked to locked i guess
thanks
Sent from my iPad using Tapatalk HD

I would gain S-off and unlock bootloader again then flash this RUU in fastboot
http://bugsylawson.com/files/file/1...13323127-1031113105-release-310878-signedexe/
RUU (ROM Update Utility)
Connect your device to the PC
Open/run the RUU and follow on screen instructions.
Set up your phone once it reboots then check for software update and you should get the 1.29.401.12 update.
When you have installed the update you can use revone to set S-on and lock your bootloader.
./revone -l
fastboot oem writesecureflag 3
This is what I did and it worked for me.

jake460 said:
Hi guys i knew the ins and out of my galaxy S3, but need help with my htc one
I know this is a big ask but having a real bad time trying to get this sorted, but need to get back to stock for new digitizer replacement.
i am running ARHD 11 with unlocked bootloader S-off, latest firmware. and twrp on my UK HTC_001
Is there a full guide to get me back to stock, as i have trawled through the forum and have about 10 tabs with various information but its getting to confusing as to what to do first with out bricking my phone.
i tried to do my stock nandroid backup first but that gave me no touchscreen function, not sure if that's because i have updated to the latest firmware, so had to flash ARHD back to get touchscreen function agian.
i then relocked the bootloader and that wiped my phone so had no system to boot into just cwm recovery. Tried to sideload rom but that didn't work adb error closed.
then i fastboot flash twrp, and then usb otg flashed arhd 11 from usb stick, working agian.
this is doing my head in, been at this for 3 days and getting nowhere
anks in advance guys if you can help.
Click to expand...
Click to collapse
If i were you i would write superCID from here http://forum.xda-developers.com/showthread.php?t=2317536. leave S-Off as it is and only lock the bootloader and then just flash the latest WWE RUU and you`re done. Unless you have a problem with your phone and need to turn it in for repair.

Cheers guys will give it a go in the morning, on nightshift at the mo
Sent from my HTC One using xda app-developers app

Getting stuck at RUU error 170 usb cable connection, must be a driver error.
Sent from my HTC One using xda app-developers app

Adb updated, htc drivers, HTC sync, pdanet installed but still getting RUU ERROR 170 usb cable not connected when trying to run Ruu Rom. Adb devices dosent see my device, it did 2 days ago.
No driver installs when I plug phone into pc in bootloader mode, pdanet used to pop up too, but dosent any more, reinstalled them all but still the same, even used cccleaner to fix registries.
Any advice on this one thanks.
Sent from my HTC One using xda app-developers app

jake460 said:
Adb updated, htc drivers, HTC sync, pdanet installed but still getting RUU ERROR 170 usb cable not connected when trying to run Ruu Rom. Adb devices dosent see my device, it did 2 days ago.
No driver installs when I plug phone into pc in bootloader mode, pdanet used to pop up too, but dosent any more, reinstalled them all but still the same, even used cccleaner to fix registries.
Any advice on this one thanks.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I have a zip you can flash which will fully hard brick your phone with no chance of HTC recovery if you need it, will probably result in a new phone and not just a new touchscreen.

MacHackz said:
I have a zip you can flash which will fully hard brick your phone with no chance of HTC recovery if you need it, will probably result in a new phone and not just a new touchscreen.
Click to expand...
Click to collapse
PM sent
Sent from my HTC One using xda app-developers app

Please send me that zip...I need to return my phone to htc
Sent from my HTC One using xda app-developers app

need latest WWE RUU exe, is it 1.29
anyone have a link, done search, but not sure which is latest.
cant run 1.28 RUU as gives me bootloader error which i think is due to upgrading to custom firmware.
thanks.

jake460 said:
need latest WWE RUU exe, is it 1.29
anyone have a link, done search, but not sure which is latest.
cant run 1.28 RUU as gives me bootloader error which i think is due to upgrading to custom firmware.
thanks.
Click to expand...
Click to collapse
If you have S-off you will not get the bootloader error.

Was s-off but trying to get to stock, long story but updated firmware few weeks back, now locked bootloader to do Ruu but some how got s-off and can't get s-on due to updated firmware or need updated revone
Sent from my HTC One using xda app-developers app

So is there a RUU WWE htc_001 1.29 that has the latest firmware that matches the custom firmware i updated to from mike86 firmware page.
Thanks
Sent from my HTC One using xda app-developers app

MacHackz said:
I have a zip you can flash which will fully hard brick your phone with no chance of HTC recovery if you need it, will probably result in a new phone and not just a new touchscreen.
Click to expand...
Click to collapse
Man, that's dark.
Is this confirmed? Has anybody flashed this, then sent their phone for warranty repair?
My phone, as far as I could tell was hard bricked (AOSP), but HTC was able to pull up my bootloader to tell me they were gonna need $200 to replace my main board.

It has been confirmed as it was initially flashed accidentally by someone. However, I won't be sharing the link as I feel it isn't morally right to do it

[Q] 4.2.2 Update error, help please

I got OTA 4.2.2 on my ONE, which i bought used, was Relocked & Tempered. But now after Revone, I made it S-ON. During the flashing of OTA, the phone restarts itself once, and second time when the OTA is being flashed, it stops midway with a RED exclamation mark.
I am not getting what could be the problem here
Any suggestions....I did not flash any recovery or anything...

I recommend you to root the phone and update the firmware manually and apply a custom rom... Or make sure to follow the exact steps to go back to stock.
I'm pretty sure there are some missing files hence the update doesn't find the right checksum to proceed with the update.

Have you relocked the bootloader? Worth giving that a try if not
Sent from my HTC One using xda premium

OTAs will usually fail if any system files are missing. If your phone was debloated at any point, even if it's s-on and relocked, that could be enough to stop the OTA from installing.
To flash an OTA, you typically have to be completely stock.

What do you suggest i should do... Right now doing revone method... I am S-on and bootloader is locked...... I want the official OTA... Amy kind suggestions plz
Sent from my HTC One using xda premium

mathrania said:
What do you suggest i should do... Right now doing revone method... I am S-on and bootloader is locked...... I want the official OTA... Amy kind suggestions plz
Click to expand...
Click to collapse
revone will not take you back to stock. You have to run a RUU for your carrier, or flash a fully stock rom if no RUU is available. For the latter, you need to be unlocked, but you can then relock and should be able to apply the OTA.
Edit: sorry, for the latter, you also have to flash the stock recovery in fastboot. You can find that in the firmware threads, though you'll need to pull recovery.img file out of the zip file.

Can some one help me find the correct RUU for me... I have posted the screen shot...
Sent from my HTC One using xda premium

mathrania said:
Can some one help me find the correct RUU for me... I have posted the screen shot...
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
There's no RUU for your version.
The 1.28.401.7 is for the HTC One UL variant (or was it the U variant?). Anyway the 1.28.401.7 will have a different MID to yours so you can't use that RUU unless you change your MID.
EDIT:
I found the 1.29.401.16.zip from here http://forum.xda-developers.com/showpost.php?p=43316694&postcount=1157 and use this guide here http://forum.xda-developers.com/showpost.php?p=40734501&postcount=1 to flash it so you should be back to stock.

Rex2369 said:
There's no RUU for your version.
The 1.28.401.7 is for the HTC One UL variant (or was it the U variant?). Anyway the 1.28.401.7 will have a different MID to yours so you can't use that RUU unless you change your MID.
EDIT:
I found the 1.29.401.16.zip from here http://forum.xda-developers.com/showpost.php?p=43316694&postcount=1157 and use this guide here http://forum.xda-developers.com/showpost.php?p=40734501&postcount=1 to flash it so you should be back to stock.
Click to expand...
Click to collapse
I wilk download and try it tomorrow morning..... Thanks for the link...
Sent from my HTC One using xda premium

mathrania said:
I wilk download and try it tomorrow morning..... Thanks for the link...
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Do you have TWRP or CWM recovery installed?
If yes that is the problem. To update you need to be on stock recovery.

x017in said:
Do you have TWRP or CWM recovery installed?
If yes that is the problem. To update you need to be on stock recovery.
Click to expand...
Click to collapse
It is a stock recovery what i have..... Because once i entered recovery via bootloader, it showed some stock recovery animations... Phone rebooted, and all was back to factory reset......
Sent from my HTC One using xda premium

Need stock recovery.img

Hello everyone I have a Canadian version Bell HTC one. Now I need stock recovery.img to flash is back to completely stock. Anyone have it or point me where to get this. Currently my htc one is rooted and s_on with twrp recovery.
Sent from my HTC One using xda app-developers app

Which is your version main?
Use the command:
Code:
fastboot getvar version-main
and post here the code.

search for guru reset htc one at google download your version. it has aroma installer and then you can choose what to do. you can make it stock without loosing system configuration apps etc.

vincedoggy said:
Hello everyone I have a Canadian version Bell HTC one. Now I need stock recovery.img to flash is back to completely stock. Anyone have it or point me where to get this. Currently my htc one is rooted and s_on with twrp recovery.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
We need to know your CID And firmware numbers, then we can help you out a bit more

Need ruu help

Help XDA world I am currently running a stock ROM rooted with locked boot loader and s-on, I want to go back to stock running a ruu but the main sites are not working like htc1guru etc,
Also I'm just a bit worried about which one I need my phone is unlocked to any network my hboot is 1.57.000
radio is 4T.29.3218.08
Emmc2048
I'm in the UK, would I need a Europe ruu? Thanks
Sent from my HTC One using XDA Free mobile app

ykdr-scott said:
Help XDA world I am currently running a stock ROM rooted with locked boot loader and s-on, I want to go back to stock running a ruu but the main sites are not working like htc1guru etc,
Also I'm just a bit worried about which one I need my phone is unlocked to any network my hboot is 1.57.000
radio is 4T.29.3218.08
Emmc2048
I'm in the UK, would I need a Europe ruu? Thanks
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
The RUU should match your MID and CID. As your s-on it must also be the same version as your current Version main or it must be an update.
Look here http://androidruu.com/?developer=M7
Post the output of
Code:
fastboot getvar all
Please remove imei and serial no. before posting.
I think you'll be lucky to find one to use wit s-on and hboot 1.57.

HTC1guru working now

Fixed thanks
Sent from my HTC One using XDA Free mobile app