Related
Hi im new to 2x recently switched from hd2 i would like to ask if its possible to overclock gpu in tegra 2.. thank you
Sent from my LG-P990 using xda premium
xtrustkillx said:
Hi im new to 2x recently switched from hd2 i would like to ask if its possible to overclock gpu in tegra 2.. thank you
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I'm guessing no since tegra drivers are close-sourced. But I could be wrong.
The GPU is indeed Overclock able, and the epeen version of vorkKernel for CyanogenMod Overclocks the GPU a little
Thank you.. do you know how much? btw brothers in arms 2 is lagging like hell..
Sent from my LG-P990 using xda premium
xtrustkillx said:
Thank you.. do you know how much? btw brothers in arms 2 is lagging like hell..
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
The GPU is overclocked from 355Mhz to 366Mhz, on the EPEEN version of vorkKernel. But remember only to flash it if you're running CyanogenMod
Wiki says original is 300mhz for 2x or am i missing something? Btw strange thing ive noticed when running multitouch benchmark try to add more than two fingers and whatch fps drops from 120 fps to 60.. is that normal or there is touch bug like there was in optimus p500.
Sent from my LG-P990 using xda premium
xtrustkillx said:
Wiki says original is 300mhz for 2x or am i missing something? Btw strange thing ive noticed when running multitouch benchmark try to add more than two fingers and whatch fps drops from 120 fps to 60.. is that normal or there is touch bug like there was in optimus p500.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
300Mhz might be the default. In that case we have some OC on the default one too.
Lag might occur on touch depending on ROM and stuff. One some devices a lot of log spam happens, and this slows down the device considerably
Ok thank you, same drops on cm7 fresh install as on fresh stock v10b its like 10 fps for each finger..
Sent from my Optimus 2X using xda premium
kiljacken said:
The GPU is indeed Overclock able, and the epeen version of vorkKernel for CyanogenMod Overclocks the GPU a little
Click to expand...
Click to collapse
i need some help to overclock
n now running miui , expected its kernal to support overclock but still setcpu shows only 1ghz max
darkmystel said:
i need some help to overclock
n now running miui , expected its kernal to support overclock but still setcpu shows only 1ghz max
Click to expand...
Click to collapse
It's kernel doesn't support OC, you should flash an alternative kernel like swiftkernel, see thread in dev section.
And you're off topic, his thread if about gpu overclock, not CPU.
Striatum_bdr said:
It's kernel doesn't support OC, you should flash an alternative kernel like swiftkernel, see thread in dev section.
And you're off topic, his thread if about gpu overclock, not CPU.
Click to expand...
Click to collapse
oopsy sorry
so whats the difference :O
the tegra also can be overclocked??
i'm new here n new to flashing
darkmystel said:
oopsy sorry
so whats the difference :O
the tegra also can be overclocked??
i'm new here n new to flashing
Click to expand...
Click to collapse
GPU is the graphics chip.
CPU is the chip used for everything else.
Overclocking the CPU will see performance gains in nearly every field, and the Tegra 2 can be overclocked from 1GHZ to 1.55GHZ or so.
Mungulz said:
GPU is the graphics chip.
CPU is the chip used for everything else.
Overclocking the CPU will see performance gains in nearly every field, and the Tegra 2 can be overclocked from 1GHZ to 1.55GHZ or so.
Click to expand...
Click to collapse
oh thanks , but what is it that we usually overclock??
is it the cpu or the gpu??
seen o2x with 1.5ghz
so is it the cpu that is oc or the gpu??
darkmystel said:
oh thanks , but what is it that we usually overclock??
is it the cpu or the gpu??
seen o2x with 1.5ghz
so is it the cpu that is oc or the gpu??
Click to expand...
Click to collapse
just a quick through :
cpu can be overclocked(controlled by pimp my cpu/setcpu)
gpu based on source code can be overclocked too, but i can't find any voltage control that control gpu clock. so, overclock gpu is really minimal, from usual 335mhz to 366mhz. in benchmark, you won't see any noticeable score. so, i don't know if the gpu overclocking working fine or not, 30mhz increase seems not helping...
cheers...
Is there any way to reach 400mhz?
Sent from my Optimus 2X using xda premium
Yes it comes.. but based on my testing,it will cause black screen of death after screen turn off for several minutes. Normal clock or a little increase doesn't make those problem.
Sent from my Optimus 2X using XDA App
Try to set cpu min to 800mhz.
Sent from my Optimus 2X using xda premium
Why can't we have a frequency of 1ghz on our mini i'd like someone should developer a kernel which can make our phone more powerfull. Some sugestions and what do you think about it?
Do You Want To Burn Your Device ??!!!
Our Processor Cannot Handle This Frequency !!!!!!
razor2911 said:
Why can't we have a frequency of 1ghz on our mini i'd like someone should developer a kernel which can make our phone more powerfull. Some sugestions and what do you think about it?
Click to expand...
Click to collapse
you are crazy 1ghz in galaxy mini??? the factory frequency is 600mhz how i can put 1ghz , the galaxy ace does'nt support it.
Creed made 1ghz kernel for fit. In testing atm
Sent from my GT-S5670 using Tapatalk
djozaa said:
Creed made 1ghz kernel for fit. In testing atm
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Forgive 1ghz for mini. Old mini
Inviato dal mio LG-P690 usando Tapatalk
razor2911 said:
Why can't we have a frequency of 1ghz on our mini i'd like someone should developer a kernel which can make our phone more powerfull. Some sugestions and what do you think about it?
Click to expand...
Click to collapse
Buy a better phone buddy
Inviato dal mio LG-P690 usando Tapatalk
overclock to 1000MHz will burn your house
buzz173 said:
overclock to 1000MHz will burn your house
Click to expand...
Click to collapse
haha nice one buzz!.. @razor2911 why would you want a frequency that cannot be handled by the hardware? 806 - 864 Mhz is not even stable to all.. buy a better phone..
I don't think overclock our device would burn it. correct me if I'm wrong.
if the cpu can't handle the speed, then it'll just reboot, won't it?
we already have 864 MHz overclock kernel. You should try it first (or you had try it?).
lonestrider said:
I don't think overclock our device would burn it. correct me if I'm wrong.
if the cpu can't handle the speed, then it'll just reboot, won't it?
we already have 864 MHz overclock kernel. You should try it first (or you had try it?).
Click to expand...
Click to collapse
The resistors will char out lol!! Happened to my friend's fit ... Really high OC!!
Sent from my GT-S5570 using xda premium
Evil_Genius2496 said:
The resistors will char out lol!! Happened to my friend's fit ... Really high OC!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
is it exploded?? lol!!
it's amazing.
you should record it.
hahahahaha..troll of the year..go buy galaxy s..1ghz stock..ROTFLOL!!!
don't wanna burn my phone buddyes i'm just asking because this phone galaxy 3 can be overclocked to 1000mhz and over and the processor has a freq of 667mhz
Max of arm6l+vfp are 1100mhz,
safe or disrange are 25 to 40%
so 600mhz are safe side.
787mhz are safe ranges.
910mhz are Turbo feature triggered on.
note: not all galaxy mini had that Turbo feature.
pocible if devloping one auther i explain creat a virtual cpu like virtual RAM it's pocible but result of this i don't know
Clic THANK's if you LIKE this thread
gabrielking9 said:
you are crazy 1ghz in galaxy mini??? the factory frequency is 600mhz how i can put 1ghz , the galaxy ace does'nt support it.
Click to expand...
Click to collapse
galaxy sl supports overclock up to 1.8ghz, then i think that galaxy mini supports oc up to 1.0ghz
sorry for my bad english
Lol, if you really need powerful processor, you should have bought better phone ;p im happy with oc to 710mhz (stable, quick enough, and safe to use)
Lol whhy spend more money if cheap phone can be fast as much.
Sent from my GT-S5670 using Tapatalk
What ??!!?!?!
1GHz??
800 MHz = unstable system
1 GHz = hmmmmm. Fire???
Its kernel 1GHz for GMini and CM 7.1
My fit is stable at 864 aaaaand want moreeee
Sent from my GT-S5670 using Tapatalk
Screenies of some good benchmarks? Please post you ROM and kernel too please
Sent from my Nexus 7 using xda app-developers app
Here's my Quadrant result.
CM 10.1 | Motley Kernel | CPU set @ 1.6 GHz | Total Points: 4619
Bl4ckX said:
Here's my Quadrant result.
CM 10.1 | Motley Kernel | CPU set @ 1.6 GHz | Total Points: 4619
Click to expand...
Click to collapse
Hmm, that's weird. I have a higher benchmark score than you, yet my cpu is just 1.3ghz. It only comes to show benchmark scores are quite useless when it comes to performance testing. I'm on stock rom btw.
Leonhan said:
Hmm, that's weird. I have a higher benchmark score than you, yet my cpu is just 1.3ghz. It only comes to show benchmark scores are quite useless when it comes to performance testing. I'm on stock rom btw.
Click to expand...
Click to collapse
Same here, 1.3ghz here, ROM stock and Franco i got 5070 points
Enviado do meu Nexus 7
I had my governor on conservative and my min at 100mhz and my max at 700 MHz and I got 4700. I use Franco kernel
Sent from my Nexus 7 using xda app-developers app
im on stock 4.2.1 rooted.
used nexus tool kit to temp boot into TWRP only to flash motley A33 kernel.
left all settings alone.
adjusted CPU speed from 1500 to 1700 and left everything else alone.
with my daily use i can get about 2 days of battery power mainly streaming netflix at night for about 3 hours for super natural.
this bench mark is fairly consistent at 1700, if i drop to 1500 CPU then the score drops back to around 5500.
nextelbuddy said:
im on stock 4.2.1 rooted.
used nexus tool kit to temp boot into TWRP only to flash motley A33 kernel.
left all settings alone.
adjusted CPU speed from 1500 to 1700 and left everything else alone.
with my daily use i can get about 2 days of battery power mainly streaming netflix at night for about 3 hours for super natural.
this bench mark is fairly consistent at 1700, if i drop to 1500 CPU then the score drops back to around 5500.
Click to expand...
Click to collapse
Do you use your tablet for anything else besides movie streaming? Cause two days of battery life sounds amazing. I'm on stock unrooted and I'm getting only about 1 day.
Sent from my Full Android on PrimoC using xda premium
Yes, its on my desk all day at work and i periodically check PULSE, CURRENTS and FLIPBOARD through out the day.
nextelbuddy said:
im on stock 4.2.1 rooted.
used nexus tool kit to temp boot into TWRP only to flash motley A33 kernel.
left all settings alone.
adjusted CPU speed from 1500 to 1700 and left everything else alone.
with my daily use i can get about 2 days of battery power mainly streaming netflix at night for about 3 hours for super natural.
this bench mark is fairly consistent at 1700, if i drop to 1500 CPU then the score drops back to around 5500.
Click to expand...
Click to collapse
Wow that's pretty good
Sent from my Nexus 7 using xda app-developers app
AW: High benchmarks
I just flashed the Trinity kernel and this time i scored about 5500 points. But for some reason im only getting 230 points 2D score.
Sent from my Nexus 7 using xda app-developers app
served24 said:
Do you use your tablet for anything else besides movie streaming? Cause two days of battery life sounds amazing. I'm on stock unrooted and I'm getting only about 1 day.
Sent from my Full Android on PrimoC using xda premium
Click to expand...
Click to collapse
You serious?
I get 3 and 1/2 days with my Nexus?
About 8 hours screen on time (Used for browsing, playing games and download etc)
The Nexus battery is the best I've ever had on a smart device.
Try:
Paranoid Android
Faux Kernel
Tis a winner !
Bl4ckX said:
I just flashed the Trinity kernel and this time i scored about 5500 points. But for some reason im only getting 230 points 2D score.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Try this
Configuration, Developer Section, Tick 'force gpu renderer'
Enviado do meu Nexus 7
Jaydizzle414 said:
Screenies of some good benchmarks? Please post you ROM and kernel too please
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
stock, rooted, motley kernel OC'd to 1.6 ghz. interactive | deadline.
AW: High benchmarks
eric-filth said:
Try this
Configuration, Developer Section, Tick 'force gpu renderer'
Enviado do meu Nexus 7
Click to expand...
Click to collapse
Thanks this fixed it. I scored over a thousand points in 2D and got an overall score of 6400.
Sent from my Nexus 7 using xda app-developers app
5925 score
Clocked on 1500
3.0.10-faux123-grouper
Omega Kernel on dirtyAOKP
1600 and 486-526gpu, can't remember exactly
Sent from my Nexus 7 using Tapatalk HD
dems86 said:
Omega Kernel on dirtyAOKP
1600 and 486-526gpu, can't remember exactly
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
This benchmark is too sux, gpu doesn't matter.
Anyway, good results.
Enviado do meu Nexus 7
One of the guys using Prime ROM scored this running 1.7ghz/484
Sent from my Nexus 7 using xda app-developers app
Hello!
Since there are some kernels that support GPU overclocking:
1. What GPU clock do you use?
2. Is your GPU undervolted?
3. Do you see any performance boost with overclock? (eg. benchmark or gaming)
4. Is your battery life the same as before? (or better/worse)
Another thing, does anyone know if you overclock our Nexus 7 GPU - does it stay there or it has no effect?
Have fun!
My example:
1. I OCed my GPU to 520mhz
2. mV values at 520mhz is 1175
3. My benchmarks are the same - I think I can see some performance improvement while gaming (might be placebo)
4. Can't really tell
i overclocked my gpu to 500mhz
with an undervolt of -50mv
You should also list what kernel you are using
Sent from my Nexus 7 using xda app-developers app
Running M-kernel a40 with GPU at 500 no under volt, I see slight improvement in graphics benchmarks but you won't get much because of the RAM bottleneck. My battery is only worse if I do a lot of gaming
Sent from my Incredible 2 using xda app-developers app
Triscuit said:
Running M-kernel a40 with GPU at 500 no under volt, I see slight improvement in graphics benchmarks but you won't get much because of the RAM bottleneck. My battery is only worse if I do a lot of gaming
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Don't use 500. Use 446, 484, 520, 600, 666, or 700. Complicated reason but trust me.
Sent from my Galaxy Nexus using Tapatalk 2
Metallice said:
Don't use 500. Use 446, 484, 520, 600, 666, or 700. Complicated reason but trust me.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ha thank you sir, I almost forgot about the "proper" values. I know the basics of why it needs to be those values
Sent from my Nexus 7 using xda app-developers app
600mhz, 1300mv, testing and searching for the lowes and more stable voltage for this frecuency.
Oh, and Metallice, why we need to use 600, 666. 700 or the other values? And, how much voltage the cpu and gpu on this device can handle?
Edit: 520 mhz using faux kernel ultimate, I don't know the voltage on his kernel.
Hi guys,i am using iodak kernel v05.I am looking at GPU frequency at the moment.GPU frequency is 200 Mhz.How can i improve this clock?
QuadBro said:
Hi guys,i am using iodak kernel v05.I am looking at GPU frequency at the moment.GPU frequency is 200 Mhz.How can i improve this clock?
Click to expand...
Click to collapse
Use tegra overclock or tricksterMOD
You can install it from Google play
Sent from my LG-P880 using Tapatalk 4 Beta
corrby said:
Use tegra overclock or tricksterMOD
You can install it from Google play
Sent from my LG-P880 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thanks for your reply
QuadBro said:
Hi guys,i am using iodak kernel v05.I am looking at GPU frequency at the moment.GPU frequency is 200 Mhz.How can i improve this clock?
Click to expand...
Click to collapse
It is not 200 it goes from 200 to 520, but you can OC it to 600 or even change all clocks. Look at kernel topic to find out how. Tegra overclock just sets all clocks to max freq (416 on stock and 520 on mine kernel).
Sent from my LG-P880 using xda app-developers app
iodak said:
It is not 200 it goes from 200 to 520, but you can OC it to 600 or even change all clocks. Look at kernel topic to find out how. Tegra overclock just sets all clocks to max freq (416 on stock and 520 on mine kernel).
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Hmm.In your kernel clock sets automaticly.Thats right ?