How can I fix this problem?i turned my phone off then later when i turned it on,it's stuck on a bootloop.
I flashed back to stock then went to recovery mode,when i tried to install zip from sdcard
it showed this error:
"E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:Can't mount /mnt/sdcard "
Can I still Fix this?
Jorjiii said:
How can I fix this problem?i turned my phone off then later when i turned it on,it's stuck on a bootloop.
I flashed back to stock then went to recovery mode,when i tried to install zip from sdcard
it showed this error:
"E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:Can't mount /mnt/sdcard "
Can I still Fix this?
Click to expand...
Click to collapse
Do you have a External SD in? If so, remove it and try again. It seems like your external has either gone bad or your internal is dead.
Can always try to reflash stock KK4.
Fixed the problem, you're right about internal storage being dead, now I can only boot it with my 4gb sdcard haha.
But thanks =))
Related
I installed CWR on my nook 1.1 and i booted into it, did a backup to my sd card, and now it wont let me reboot...can anyone help?
There may be a way to fix this, but I tried for hours and scoured the forum but didn't find a way to get out of the loop. I had to go back to Stock BN. That fixed it. Then I rerooted.
Yea I actually ended up doing the same thing... we can close this thread, thanks
There is about 10 threads in the general forum to resolve this. Just FYI. The fix is to use Monster CWR bootable SD card to flash CW-removal.zip and remove CWR off the internal memory. Stick to using the bootable CWR instead.
Sent from my Nexus S using XDA App
Yep, try here:
http://forum.xda-developers.com/showthread.php?t=922870
Wish I'd seen this the other day. . . .
Or, before removing CWR, try this adb command from CWR:
mount /dev/block/mmcblk0p2 /rom
echo 0 > /rom/devconf/BootCnt
Then reboot..
Ignore any error from mount command, this is just in case rom isn't mounted..
Sent from my HTC Desire using XDA App
Problems with my clockwork mod.
I was wondering if you could help me out.
I tried to install clockwork mod 3.0.0.5 in froyo and what's happening now is everytime I try to reboot into clockwork recovery it gets stuck.
it's no longer showing the green recovery but the orange one. However it freezes right there, the up and down options dont work. The only way to get it running is by taking the battery out and then turn it back on.
The error message that shows right below the orange clockwork mod says:
E:failed to open /conf/recovery.fstb (No such file or directory)
E:unknown volume for path /cache/recovery/command
E:Cant mount /cache/recovery/command
E:unknown volume for path cache/recovery/log
E:cant mount cache/recovery/log
E:cant open cache/recovery/log
E:unknown colume ofr path /cache/recovery/last_log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
E:unknown volume for path /cache/recovery/command
What can I do?
Today my phone randomly rebooted when idle and didn't get past the talon loading screen when running Dlev 4.2 rom. it was working fine for 1.5 weeks or so on that rom and had made no changes other than activating voodoo lagfix yesterday. No matter what I did (Factory reset, clear cache...etc) it still wouldn't get past the talon loading screen so I reinstalled Dlev 4.2. Same problem, won't get past the kernel loading screen. So I flashed stock JL1 (rogers) with odin and my phone booted, but then had tonnes of fc's and eventually just reboot into 3e recovery and had a bunch of red errors (can't mount a bunch of stuff). It gave me the option to format sd card, so I chose that but it told me sd card was not found. I then thought to 1 click JF6, but after the at&t screen the phone just goes to black screen with lights on. I can get into 2e recovery mode still but no download mode with key combo's. I believe the sd card needs to be reformatted. I have a jig coming someday soon, ordered it 2 weeks ago, but I was wondering if there is anything I can try till it arrives to revive my phone. I tried adb commands from recovery but it doesn't detect my phone. My computer says installing drivers (CDC Abstract control Model (ACM)) but nevers finishes installing them. Thanks for you help.
I was able to get into download mode by typing adb reboot download when phone was booting. I flashed one of the speedmod kernels I had on my computer and I can boot into CWM Recovery now. I formatted sdcard and reflashed JL1 but still no boot. What else can I try???
Edit: I think my internal memory is damaged or something. When I boot into 3E recovery I get the following errors.
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(I/O error)
E:copy_dbdata_media:Can't mount SDCARD:
Your storage not prepared yet, please use UI menu for format and reboot action.
E:copy_dbdata_media: format SDCARD:
Formatting SDCARD:...
E:Can't mount /dev/block/mmcblk0p1
(I/O error)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
Edit 2:
I have been doing research and have found out that I need to fix my partitions at /dev/block/mmcblk0p1. I pushed parted to my phone and used adb shell to run it following directions of a website, but when I try to make a new filesystem by typing parted /dev/block/mmcblk0p1 mlfs ext2 I get an error Error: /dev/block/mmcblk0p1: unrecognized disk lable. I don't know linux at all. Can anyone help please.
Hi everybody
I was on the newest DarkyRom version on my SGS GT-I9000.
But last week I got the SGSII. So i wanted to flash the SGS back to stock to sell it.
A tutorial told me to flash JPU first and then update later to newer versions.
I did this and the phone was back to the original firmware (everything worked fine).
But when I tried to boot it this morning it got stuck in a bootloop.
So I tried to flash JPU again. But this didn't help.
I got error messages on first startup like:
Code:
update media. please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage is not prepared yet. please use UI menu for format and reboot actions.
copy default media content failed
Since then I have tried to flash many other firmwares. Stuff between 2.1 and 2.3.6.
But nothing helped. The same error on first startup after flash and then bootloop.
Someone told me to flash CWM via ODIN an see if the SDCard was mounted.
Turned out it's not. When I try mounting the SDCard in the CWM recovery mode I get the following:
Code:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(I/O error)
Error mounting SDCARD:!
Is there any way to get the phone back to life or is the internal SD card just broken and do I have to send the phone in?
Greets
no one got an idea?
I guess not... :S
I have the exact same problem. But I didn't even tinker with my phone. I started crashing daily and now it doesn't even boot anymore.
Hi all,
I just bought a Milestone, after reading this thread
http://forum.xda-developers.com/showthread.php?t=932196&page=13
I managed to run bootloader and install the UK vulnerable recovery as linked above (2.2). But the step after that: flash update.zip, I cannot apply it, the errors keep pumping out:
"E: Can't mount /dev/block/mmcblk0p1 (No such file or directory)
E: Can't mount SDCARD:update.zip
Installation aborted"
And the sdcard works randomly, most of the time android cannot recognize it, sometimes I just leave the phone blacked out for 1 minute and sdcard appears again T_T
Please help me out T_T, thank you
Bump !
replace the card
I replaced it with 2 other cards but apply update.zip still not working, errors changed to:
"E: Can't mount /dev/block/mmcblk0p1 (Invalid argument)
I've seen something fairly similar before. Make sure you try different brand cards if at all possible, and it wouldn't hurt to format them on a regular computer as well. I'll see if I can't dig up an article on the formatting type that was generally considered best for our phones....
i thought it would be an easy fix just re flash VZW stock firmare...wrong didnt work still has boot loop.
when i go into manula mode i get these error mesages
E: failed to mount /cache (no such file or directory)
E: cant mount /cache/recovery/command
#manual mode#
E: cant mount
E: cant open
E: copy kernel file cant open...blah blah blah
it either says failed or cant
it will not let me apply from sd card if i try to wipe data/factory reset it says complete and then cant and failed...
idk... i have been reading the internet for days looking for a fix. there has to be one out here besides paying manufacturer to fix it.
PLEASE HELP...
HELP!!! Samsung GT 7 vzw3g stuck in boot loop with error in manual mode
tinkerbell91179 said:
i thought it would be an easy fix just re flash VZW stock firmare...wrong didnt work still has boot loop.
when i go into manula mode i get these error mesages
E: failed to mount /cache (no such file or directory)
E: cant mount /cache/recovery/command
#manual mode#
E: cant mount
E: cant open
E: copy kernel file cant open...blah blah blah
it either says failed or cant
it will not let me apply from sd card if i try to wipe data/factory reset it says complete and then cant and failed...
idk... i have been reading the internet for days looking for a fix. there has to be one out here besides paying manufacturer to fix it.
PLEASE HELP...[/
WARNING.........DO NANDROID BACKUP IS VERY VERY IMPORTANT....
im pretty sure u not backup ur rom....if u done it just acess RECOVERy and restore...u will get exactly same setting before ur update that...
FORMAT / SYSTEM....in recovery option have u done this before install??
What did u do....in flashing stock fm
What tool you use to flash the stock firmware??
Click to expand...
Click to collapse