For those who travels outside the country.
I upgraded to 4.2.2 on my phone. Now I'm deploying in Afghanistan, bought a Roshan SIM card from a local shop for $2. I couldn't get the phone to connect to mobile network, or internet and couldn't access APN mode from the settings. I've tried to upgrade different ROMs 4.2.2 with same issue.
Resolve:
Phone must be rooted
- open and edit file /system/build.prop
- look for these lines:
- telephony.rilV7NeedCDMALTEPhone ...... set = false, or disable the line with #
- gsm.current.phone-type ...... set 0=none, 1=gsm, or disable the line with #
- reboot the phone.
Addition note:
To edit APN setting file manually; /system/etc/apns-conf.xml
thanks a lot for that, i just use xt925's roms and it work, but this will give me the opportunity to try all roms , thanks again.
saranay said:
Phone must be rooted
- open and edit file /system/build.prop
- look for a line: telephony.rilV7NeedCDMALTEPhone
- set = false, or delete the line
- reboot the phone.
Click to expand...
Click to collapse
I did this and nothing changed in the Mobile Network Settings. I've only tried this in the CM10 Nightly 4.2.2 by Skrilax.
What else is necessary to achieve an APN Settings section in 4.2.2? THANKS
KeepingItCuttingEdge said:
I did this and nothing changed in the Mobile Network Settings. I've only tried this in the CM10 Nightly 4.2.2 by Skrilax.
What else is necessary to achieve an APN Settings section in 4.2.2? THANKS
Click to expand...
Click to collapse
on xenon hd rom, you will find the access points in settings, if you dont want try xenon, then download APN backup application from play store, most of them will open the APN settings for you
KeepingItCuttingEdge said:
I did this and nothing changed in the Mobile Network Settings. I've only tried this in the CM10 Nightly 4.2.2 by Skrilax.
What else is necessary to achieve an APN Settings section in 4.2.2? THANKS
Click to expand...
Click to collapse
Can you open APN setting on Mobile Network Setting?
Also you edit APN setting manually /system/etc/apns-conf.xml
unsuccessfully
saranay said:
For those who travels outside the country.
I upgraded to 4.2.2 on my phone. Now I'm deploying in Afghanistan, bought a Roshan SIM card from a local shop for $2. I couldn't get the phone to connect to mobile network, or internet and couldn't access APN mode from the settings. I've tried to upgrade different ROMs 4.2.2 with same issue.
Resolve:
Phone must be rooted
- open and edit file /system/build.prop
- look for these lines:
- telephony.rilV7NeedCDMALTEPhone ...... set = false, or disable the line with #
- gsm.current.phone-type ...... set 0=none, 1=gsm, or disable the line with #
- reboot the phone.
Addition note:
To edit APN setting file manually; /system/etc/apns-conf.xml
Click to expand...
Click to collapse
I tried to perform the procedure on my razr hd xt925, because my 4g is not working, and after making changes the cell did not. Did anyone have a build.prop Brazil retail that I can simply copy and paste in my razr?
Related
i apologise for being a noob, i am from india and i recently purchased a droid 3, when i unlocked my droid 3 i was able to make calls and send text messages with all the GSM sims but none had data available in them, after some research i got to know that xt862 rom doesn't provide gsm data support internationally and i will have to install a Chinese xt882 rom for it to work. well at the start i didn't any idea of whatsoever ROM or root or safestarp ment but after a lot of research and reading i was able to root and safestrap my phone but when i tried installing xt882 rom using safestrap it came with an error. can any one please help me with this as i would really love to use my phone daily. i don't want it to end up as expensive music player
shantan said:
i apologise for being a noob, i am from india and i recently purchased a droid 3, when i unlocked my droid 3 i was able to make calls and send text messages with all the GSM sims but none had data available in them, after some research i got to know that xt862 rom doesn't provide gsm data support internationally and i will have to install a Chinese xt882 rom for it to work. well at the start i didn't any idea of whatsoever ROM or root or safestarp ment but after a lot of research and reading i was able to root and safestrap my phone but when i tried installing xt882 rom using safestrap it came with an error. can any one please help me with this as i would really love to use my phone daily. i don't want it to end up as expensive music player
Click to expand...
Click to collapse
You have to get the correct APN (Access Point Name) for your provider to make data/MMS to work, you should not require the XT883 firmware. Just try google with your SIM provider followed by APN settings.. such as "Orange UK APN Settings" or check their website, or give them a call for the correct APN settings. Some SIMs have the APNs locked into the SIM, some of them do not include APNs (You might check a phone from the SIM provider for the APN).
When you find the correct settings, go to Settings > Wireless & Network settings > Mobile Networks > Access Point Names
Create a new APN and enter the info you found. Also check Battery & Data Manager > Data delivery to ensure data is enabled.
Skreelink said:
You have to get the correct APN (Access Point Name) for your provider to make data/MMS to work, you should not require the XT883 firmware. Just try google with your SIM provider followed by APN settings.. such as "Orange UK APN Settings" or check their website, or give them a call for the correct APN settings. Some SIMs have the APNs locked into the SIM, some of them do not include APNs (You might check a phone from the SIM provider for the APN).
When you find the correct settings, go to Settings > Wireless & Network settings > Mobile Networks > Access Point Names
Create a new APN and enter the info you found. Also check Battery & Data Manager > Data delivery to ensure data is enabled.
Click to expand...
Click to collapse
i got the access point name from my provider but when i go in to Settings > Wireless & Network settings > Mobile Networks > Access Point Names the APN screen shows up blank with no functions to create or edit APN
shantan said:
i got the access point name from my provider but when i go in to Settings > Wireless & Network settings > Mobile Networks > Access Point Names the APN screen shows up blank with no functions to create or edit APN
Click to expand...
Click to collapse
Tap the menu softkey at the APN screen and tap add APN.
Skreelink said:
Tap the menu softkey at the APN screen and tap add APN.
Click to expand...
Click to collapse
cheers for the help, one last favour as i am new to ROMs can you suggest a good and easy ROM that i can put in to an sd card and install it with safestrap without any hassle
shantan said:
cheers for the help, one last favour as i am new to ROMs can you suggest a good and easy ROM that i can put in to an sd card and install it with safestrap without any hassle
Click to expand...
Click to collapse
I personally use MavRom (Maverick Rom) version 4.0, as version 4.5 has a battery drain issue with the overclock script. It's based on 906 with modifications and tweaks.
Skreelink said:
I personally use MavRom (Maverick Rom) version 4.0, as version 4.5 has a battery drain issue with the overclock script. It's based on 906 with modifications and tweaks.
Click to expand...
Click to collapse
so i was going through this thread http://forum.xda-developers.com/showthread.php?t=1406812 for flashing xt883 radio on my phone as the reception is very bad i had a few doubts
1) do you connect your phone to the pc while doing this
2) do you download root explorer on your phone from the app store and are there any free ones
3) and how do you go about doing this ( Use root explorer to push the build.prop into the system folder )
i am very sorry for being such a noob, its my first android phone
shantan said:
so i was going through this thread http://forum.xda-developers.com/showthread.php?t=1406812 for flashing xt883 radio on my phone as the reception is very bad i had a few doubts
1) do you connect your phone to the pc while doing this
2) do you download root explorer on your phone from the app store and are there any free ones
3) and how do you go about doing this ( Use root explorer to push the build.prop into the system folder )
i am very sorry for being such a noob, its my first android phone
Click to expand...
Click to collapse
On Stock and Blur based roms, there's a little line in the build.prop that Verizon snuck in.. that makes any GSM network appear to have bad reception (only 1~2 bars) but if you check under status, the reception is actually good. You can fix that by editing this line in build.prop;
ro.mot.phonemode.vzwglobalphone=1
Change the 1 to 0 and save, then reboot, this should fix the 'reception issue'
A free root browser would be JRummy's Root browser lite, or ES File Explorer (you can enable root browsing in settings).
Build.prop is in /system
IF YOU INSIST ON FLASHING XT883 (Only required for using AT&T/T-Mobile/Other USA GSM networks)
Open a root browser; copy the build.prop you have to the SDCard or somewhere safe. Copy the build.prop (after you edit the line I mentioned before on the PC, you can use notepad). After you put it in /system MAKE SURE YOU FIX THE PERMISSIONS. Most root browsers just long-press build.prop, then tap permissions (ES is Properties > permissions) Check only Read (on all three, user, other, etc) and Write on Owner ONLY.
Then use the fastboot instructions to flash the XT883 radio. THIS WILL BREAK VERIZON CDMA.
Hello I have a Atrix HD, unlocked phone and the problem is everytime i try to turn on the wireless hotspot there comes a message that I have to register at ATT first and then I can activate it. Please help.
Hussain
hussain.mesiya said:
Hello I have a Atrix HD, unlocked phone and the problem is everytime i try to turn on the wireless hotspot there comes a message that I have to register at ATT first and then I can activate it. Please help.
Hussain
Click to expand...
Click to collapse
What operating system are youmusing? have you rooted your phone?
marcelarr said:
What operating system are youmusing? have you rooted your phone?
Click to expand...
Click to collapse
Actually I dont know if my phone is rooted or not. can you guide me a little as to how to find that out. all i know is when the guy i bought the from was waiting for a some code to come in and unlock it. it shows all the ATT&T stuff etc. Also now today I cannot find skype on my phone after i did a factory reset....
hussain.mesiya said:
Actually I dont know if my phone is rooted or not. can you guide me a little as to how to find that out. all i know is when the guy i bought the from was waiting for a some code to come in and unlock it. it shows all the ATT&T stuff etc. Also now today I cannot find skype on my phone after i did a factory reset....
Click to expand...
Click to collapse
1)go to the file /data/data/com.motorola.android.providers.settings/databases/settings.db
Open it on any database editor(for example - X-plore), then go on the section settings and look for the "entitlement_check" field and change its value to 0 or default.
2)Some says also you have set your access point(apn), change apn type to - default,tether
I did it, and I can connect to my hotspot but there aren't any internet.
I had the same symptom, connect to hotspot but no internet access until I did this:
http://forum.xda-developers.com/showthread.php?p=34145203#post34145203
Full instruction:
How to revive Hotspot
Install the sqlite and go to Settings Storage -> settings.db -> settings
Change the field
a) entitlement_check -> 0
b) dun_apn_changeable -> 1
In the setting of apn, type apn -> default,dun,supl
Enjoy
My Cellphone model is MB886 and it is runnin android 4.1.1. I am unable to find the settings storage using the SQlite. Any ideas why ?
My problem I will again regurgigate is that whenever I turn on mobile hotspot it says you have to first make an account on ATT&T, same is the case with all other tethring.
Hussain
activecs said:
Full instruction:
How to revive Hotspot
Install the sqlite and go to Settings Storage -> settings.db -> settings
Change the field
a) entitlement_check -> 0
b) dun_apn_changeable -> 1
In the setting of apn, type apn -> default,dun,supl
Enjoy
Click to expand...
Click to collapse
Look for setting storage
Com.motorola.android.providers.setting
In sqlite or use root explore and go to /data/data/com.motorola.android.providers.setting/databases
Sent from my MB886 using xda premium
Hello to everybody. I'm italian and I have a problem with my XT890 stock (booloader locked, android 4.1.2, system version 91.2.26001.XT890.Retail.en.EU) and sim card by italian operator Noverca. Noverca is a Full Mobile Virtual Network Operator, MMC 222 MNC 07, working in roaming with TIM (222-01).
When I enter my sim Noverca, on phone: menu> Setup> Other> Mobile Networks> Access Point Names> APN cannot find any access point. If I try to create one ... > New APN> Edit access point> (insert the parameters provided by my operator)> ... > Save, the new APN created by me is not saved and the list of APN available is always empty. Similarly if I receive a message from my operator self-configuring and save these settings, I see a pop-up that the configuration was successful but when I go to see the list of APN find it empty again.
I tried to configure it with the data on and off, data roaming , but always no results. The problem also doesn't occur with sim of other carriers.
The sim card is new and works fine on my other Android phones (RAZR XT910, Galaxy i5800), making right APNs.
In system/etc/ apns-conf.xml file there is written the configuration for my carrier but it's wrong (there is written MMC 222 MNC 01)!
I contacted Motorola XT890 but the answer is that it was not released in Italy and may have compatibility issues. (But in Germany, France and UK has been released and the gsm/wcdma networks are the same as in Italy!)
Thank you for helping.
Same happens to me. Try reseting apn to default and edit the config that should appear.
duck from space said:
Same happens to me. Try reseting apn to default and edit the config that should appear.
Click to expand...
Click to collapse
Thanks but in my case doesn't work. Also at the reboot there isn't any apn saved.
I solved this problem unlocking the bootloader and making Root.
After I went to system/etc and renamed apns-conf.xml in apn-conf.bak (only to have a backup, i could delete the file and it was the same).
Then I went to menu> Setup> Other> Mobile Networks> Access Point Names and resetted APN to default.
Now I can write my carrier's APNs and they are saved without disappearing.
after installing Slim Bean 4.2.2 can't connect to data network packet anyone can help me?
it's was working good on GB 2.3.4 and 2.3.6 b4 installing CM9 then Slim Bean 4.2.2
do you have correct APN settings? Open Settings > More... > Mobile Networks > Access Point Names and check to see if you have correct settings.
EDIT: maybe you need to flash Baseband for your region.
pryerlee said:
do you have correct APN settings? Open Settings > More... > Mobile Networks > Access Point Names and check to see if you have correct settings.
EDIT: maybe you need to flash Baseband for your region.
Click to expand...
Click to collapse
APNs settings is empty and when i press + on the right top screen i found :-
Name : not set / APN: not set and the same for Proxy,Port,Username,password,server,MMSC,MMS proxyand MMS port.
MCC:602 , MNC:03
Authentication Type: not set
APN type : not set
APN protcol: IPV4
ok so you need to manually type in the correct APN settings for your network then save them.
EDIT: do a Google search for your networks APN settings
just i need lag fix work good on this rom and i wanna to know the stock Kernel is good or there is a better Kernel i can use
anyone there to answer me?
1. For those wondering why this is posted in the T-Mobile section: MetroPCS is owned by T-Mobile and as you will see through this post is very influential in it working.
2. If you got it working some other way, more power to you. please do not confuse people (because lets face it alot of people looking at this havent been on here very long or just stumbled onto the thread) by posting your "fix"
THIS IS FOR HTC ONE M9 users who have taken their devices to MetroPCS. If you are not on MetroPCS then do not try this in any way because it will not work for you. If you are on metropcs and have a T-Mobile firmware installed then try changing the apn settings from step 6-12. This will also fix people having problems turning the wifi calling switch on
YOU MUST BE ON THE MARSHMALLOW T-MOBILE FIRMWARE (3.39.531.7) FOR THIS TO WORK, MEANING MAKE SURE YOU ARE RUNNING A MARSHMALLOW ROM (NOT AOSP ROMS). THE ROM CAN BE BASED ON 3.35 for its base, this is not to be worried about. Also make sure the rom cook has T-Mobile support (i.e. ViperOne 4.3.0 etc) THESE INSTRUCTIONS INCLUDE FLASHING TO THE 3.39.531.7 FIRMWARE. MAKE SURE YOU FOLLOW THE INSTRUCTIONS IN THIS POST AND ANY POSTS THIS ONE LINKS TO.
How to get wifi calling & sms over wifi working on MetroPCS on the m9
FIRST AND FOREMOST STEP IS TO MAKE A COMPLETE BACKUP OF YOUR DEVICE IN RECOVERY IN CASE THINGS DO NOT GO AS INTENDED!
1. Make sure you have registered an account on http://www.metropcs.com/account.html
2. Download the myMetro app from the play store here: https://play.google.com/store/apps/details?id=com.nuance.nmc.sihome.metropcs&hl=en & download sqlite editor attached to this post and install it.
3. open the app and it should recognize you automatically, on the left upper corner of the app click the 3 lines to bring out the side menu. Click on E911 Address and follow the instructions.
4. Once you submit this information you will receive a text message saying you have filled out the e911 info for wifi calling.
5. Goto this post and follow the instructions for downloading and flashing the 3.39.531.7 firmware: http://forum.xda-developers.com/one-m9/development/3-39-531-7-nowipe-noredtext-twrp-3-0-0-1-t3326861
6. Once your phone reboots go into airplane mode. open the sqlite editor app on your phone.
7. click the files tab. then navigate to /data/data/com.android.providers.telephony/databases/
8. click on telephony.db then carriers_cache. click on the 3 dots in the upper right corner and select delete all
9. click the back button and select carriers.
click the first line, then the little pencil and change the following exactly:
Code:
Name: MetroPCS
Numeric: 310260
mcc: 310
mnc: 260
apn: fast.metropcs.com
mmsc: http://mms.msg.eng.t-mobile.com/mms/wapenc
type: default,supl,mms,hipri,dun
protocol: IPV6
roaming_protocol: IP
state: MAKE SURE THIS FEILD IS BLANK IF IT SAYS READONLY REMOVE READONLY
10. click save
11. Take yourself out of airplane mode and goto your apn settings and make sure that the apn selected is the one that says MetroPCS with the apn set as fast.t-mobile.com
12. Go enable wifi calling via the switch in call settings. Make sure you are connected to a wifi network, then once you are sure it is working, go ahead and turn airplane mode back on, then activate ONLY WIFI. Let it connect. (For a few seconds you MAY see an invalid sim error, ignore it it will go away once the connection is made. and try making a call and sending a sms. SMS may only work with the stock app while in airplane mode. im not sure if that has changed. Anyway hope this helps. Enjoy.
Must be in airplane mode to edit the databases?
No you don't HAVE to be but if you aren't then carriers cache can repopulate while you are editing
Sent from my HTC One M9 using XDA Labs
I get no databases in telephony/databases, it's empty. Well I'm not trying to go metro but just be able to edit telephony.db. Not sure if it's one of those steps that allows one to be able to see the databases.
Sent from my HTC One M9 using Tapatalk
Make sure you are at /data/data/com.android.providers.telephony/databases/
aestivalisakito said:
Make sure you are at /data/data/com.android.providers.telephony/databases/
Click to expand...
Click to collapse
Yeah I am, you just can't see them in the latest T-Mobile marshmallow update.
HTC One M9
Can't see them in the latest tmo mm update? That is absolutely not correct. Is your system mounted read only by chance? If it is mount it read write then see if you can find it in sqlite editor
aestivalisakito said:
Can't see them in the latest tmo mm update? That is absolutely not correct. Is your system mounted read only by chance? If it is mount it read write then see if you can find it in sqlite editor
Click to expand...
Click to collapse
Well how will I do that? Within the App it self? I know I'm able to edit system on ES File Explorer but that app gives you the option to make system read/write. Now I'm able to see the db files in ES but not SQ.
HTC One M9