[Q] cant connect phone to smartflash, what to do? - LG Optimus 2x

I'm trying to install a new baseband and have folllowed the guide from the all in one tool: http://forum.xda-developers.com/showthread.php?t=2020737
My problem is that when i take out my battery and connect the phone with vol - pressed down nothing happens I have installed the drivers and all that. I did this half a year a go and it worked fine but now i doesnt.. Im on CM10.1 - tonyp - T-Build 03, new bootloader with kowalski kernel exp123.
Does anyone know what to do?
thank you.

I think you should press both volume up and volume down at the same time..
Sent from my LG-P990 using xda app-developers app

filarod said:
I think you should press both volume up and volume down at the same time..
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Sorry you think wrong. For smart flash only press volume down bottom while connecting via USB.
Try another USB port, or try on old bl

Related

Software upgrade mode

Here in XDA, some people telling to access software upgrade .. press volume + button and plug in USB cable
But some people telling press volume + button and plug in USB cable (after removing battery)
which is correct to follow to avoid phone brick problems ?
Any XDA Senior member Reply is appreciated.
honey12345 said:
Here in XDA, some people telling to access software upgrade .. press volume + button and plug in USB cable
But some people telling press volume + button and plug in USB cable (after removing battery)
which is correct to follow to avoid phone brick problems ?
Click to expand...
Click to collapse
Hold the volume+ button and plug in that should allow you to enter s/w upgrade mode.
Sent from my LG Optimus Black using xda premium
With or without battery?
Sent from my LG-P970 using xda premium
Many people recommended to remove battery, SD card and Sim card before entering s/w mode
It works without removing any of them .. simply hold volum and insert cable. Cheers
Sent from my LG-P970 using xda app-developers app
without battery but insert sim and microsd
For me it works without remiving anything =)
Sent from my LG-P970 using xda premium
mehdi-ob said:
without battery but insert sim and microsd
Click to expand...
Click to collapse
Is the software upgrade mode same as Download or Emergency mode ?
engrusaf said:
Is the software upgrade mode same as Download or Emergency mode ?
Click to expand...
Click to collapse
Yep
Sent from my LG-P970 using Tapatalk 4 Beta

[Q] sound bar is comming automatically

I have brought this phone 4days before ...and flashed with xxlpy ...but facing a problem. ..my phone's sound bar (the iconcome if we press volume onor off key) is comming automatically. ..how to stop it..plx help
dipanjannet said:
I have brought this phone 4days before ...and flashed with xxlpy ...but facing a problem. ..my phone's sound bar (the iconcome if we press volume onor off key) is comming automatically. ..how to stop it..plx help
Click to expand...
Click to collapse
Do a factory reset if u haven't yet.
Our phone have really weird problems...
Sent from my GT-I9070
frzek said:
Do a factory reset if u haven't yet.
Our phone have really weird problems...
Sent from my GT-I9070
Click to expand...
Click to collapse
cn you tell me how to do factory reset. ..plz tell me the complete procedure. ..
dipanjannet said:
cn you tell me how to do factory reset. ..plz tell me the complete procedure. ..
Click to expand...
Click to collapse
Switch off your phone, boot into recovery mode by pressing Vol up+home+power button together.
Once you are in recovery mode, navigate via vol up/down keys to the option factory reset.select by using power button.
That should solve your problem..
Sent from my GT-I9070 using xda app-developers app
rushilkr said:
Switch off your phone, boot into recovery mode by pressing Vol up+home+power button together.
Once you are in recovery mode, navigate via vol up/down keys to the option factory reset.select by using power button.
That should solve your problem..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
do same...bt till da same problem....
Try flashing a more stable version of jellybean like xxlq4(works like a charm for me..consider going for this version) or xxlqb..these have minimal bugs, so that might help..remember to do a factory reset after flashing..
Sent from my GT-I9070 using xda app-developers app
which one is more stable.?...is my problem can harm my device. ?....
I think lq4..works like a charm for me..give it a try..it wont harm your device..
Sent from my GT-I9070 using xda app-developers app

XPERIA Z red led blinking

hi all,
i have an xperia z c6603 lcoked,
i successfuly installed cwm on it, after that i tried to install a custon rom on it,
i enter recovery, wipped data/cache and installed from zip the zip
it wrote installed successfuly, without poping up the aroma installer (maybe this is my first problem, maybe i broked the stock rom )
but now when i'm trying to turn on / enter recovery nothing happend, only a blinking red led even when i puted it on charge
how can i fix this problem
Hold volume up + power for 10 seconds, then release them. Now, hold volume up and plug it into a PC via USB. You could probably use Flashtool now to flash a FTF file of your region. That should fix it.
thanks for your answer,
i have the blue led but usb not detected as debugging mod, will this work ?
should i worry about the led blinking ? i was on flashing roms on my old S3 , sony is more complicated ...
thanks dude
Zorua said:
Hold volume up + power for 10 seconds, then release them. Now, hold volume up and plug it into a PC via USB. You could probably use Flashtool now to flash a FTF file of your region. That should fix it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
i still have the missing driver s1boot i installed the flashboot drivers pack , but still missing.
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
zirconias said:
i still have the missing driver s1boot i installed the flashboot drivers pack , but still missing.
Click to expand...
Click to collapse
Download sony update service it has the drivers needed.
Sent from my C6603 using xda premium
Zorua said:
Hold volume up + power for 10 seconds, then release them. Now, hold volume up and plug it into a PC via USB. You could probably use Flashtool now to flash a FTF file of your region. That should fix it.
Click to expand...
Click to collapse
Thank you very much "Zorua", after trying to flash a Rom, I stayed stocked with the red led, without being abble to boot or access CWR, and you suggestions worked!
Cheers from Portugal!

xperia z dead after update 4.2.2

hy today i update my xperia z to 4.2.2 version and after update it start succesfully i used it 4 hours after update
then i power off it and try to power on but it is not responding
my battery is 80% at that time
i try every method volume up + power button
volume down + power button
both volume keys + power button
i try to flash ftf through flash tool but it does not start flashing and hang on these words reading device information
after some time it say flashing abort
i also try SEUS, after select xperia z in seus it say press volume down and connect usb i did it but nothing happened
i lived in Lahore Pakistan and here no sony service station so i cant brieng it to sony officials
my bootloader is locked
what can i do now
zohaib0001 said:
hy today i update my xperia z to 4.2.2 version and after update it start succesfully i used it 4 hours after update
then i power off it and try to power on but it is not responding
my battery is 80% at that time
i try every method volume up + power button
volume down + power button
both volume keys + power button
i try to flash ftf through flash tool but it does not start flashing and hang on these words reading device information
after some time it say flashing abort
i also try SEUS, after select xperia z in seus it say press volume down and connect usb i did it but nothing happened
i lived in Lahore Pakistan and here no sony service station so i cant brieng it to sony officials
what can i do now
Click to expand...
Click to collapse
Hold down both volume buttons and the power button for 20 seconds, then it should boot!
try recharging the battery as it might be a wrong battery reading the 80%
Hold down both volume buttons and the power button for 20 seconds, then it should boot!
Click to expand...
Click to collapse
do it but nothing happened
try recharging the battery as it might be a wrong battery reading the 80%
Click to expand...
Click to collapse
after connecting the charger nothing happened
zohaib0001 said:
do it but nothing happened
after connecting the charger nothing happened
Click to expand...
Click to collapse
LED ?!
detecting USB on PC ?!
detecting on PC companion ?!
tell more about situation of ur phone
:good:
x102x96x said:
LED ?!
detecting USB on PC ?!
detecting on PC companion ?!
tell more about situation of ur phone
:good:
Click to expand...
Click to collapse
no LED notification light signal
when i plug a usb cable in xperia z with laptop a connection tone comes from my laptop speaker seems that system connected it but after that nothing happened
PC companion detected but it did not connected it , it says turn on your phone for connection. it happened when i try to repair it
zohaib0001 said:
no LED notification light signal
when i plug a usb cable in xperia z with laptop a connection tone comes from my laptop speaker seems that system connected it but after that nothing happened
PC companion detected but it did not connected it , it says turn on your phone for connection. it happened when i try to repair it
Click to expand...
Click to collapse
fortunately it seems to be Soft-Bricked
did u use Emma Flash tool to detect phone and flash stock rom and kernel !?
And make sure thr s no problem in power button
maybe thr s problem with power.
:good:
x102x96x said:
fortunately it seems to be Soft-Bricked
did u use Emma Flash tool to detect phone and flash stock rom and kernel !?
And make sure thr s no problem in power button
maybe thr s problem with power.
:good:
Click to expand...
Click to collapse
downloading Emma right now, i will report soon
Hi Zohaib,
nice to see you here. Hope you will come up with some good roms.
good luck with your bricked device
Did you play with TA partition?
Did you unlocked the bootloader?
Ps:emma is only for unlocked bootloader so it wont work in locked bootloader.
Sent from my C6603 using xda premium
If bootloader is unlocked it should be easy to fix, if it's locked it also should be able to be fixed if it's a soft brick is it locked or unlocked?
Sent from my C6603 using xda app-developers app
krabappel2548 said:
If bootloader is unlocked it should be easy to fix, if it's locked it also should be able to be fixed if it's a soft brick is it locked or unlocked?
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
my bootloader is locked
last night i take a TA backup only , i did not restore it or did not do anything else
i just take back up only with v9.3 backup tool
Please help me i cant see my xperia z like this ...........
Might be a bad eMMC chip, similar to the Galaxy S3 i9300 SDS (Sudden Death Syndrome):
http://www.androidpolice.com/2013/0...ets-dying-randomly-sony-says-fix-is-incoming/
http://forum.xda-developers.com/showthread.php?p=38772194
Someone said pressing Volume Up + Power turned it on.
Search for thr thread..''disaster recovery''.. I cnnt findbit...something like this happened but the fastboot was working!..you can try that too!
Best of luck!
Sent from my C6603 using xda premium
did you try holding for 10 seconds?
1. Power button
2. Power button + volume up
Sent from my Nexus 4 using xda app-developers app
reiko09 said:
did you try holding for 10 seconds?
1. Power button
2. Power button + volume up
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
yes i hold it even 20 second , then more then 20 second nothing happened
Search for thr thread..''disaster recovery''.. I cnnt findbit...something like this happened but the fastboot was working!..you can try that too!
Best of luck!
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
it is not working
i have the exact same problem with you. locked bootloader as well
i updated to 4.2.2 with wipe everything.
Backed up TA partition using tool v9.3
after that the device does not wake up after a reboot.
no amount of power+vol up/down can boot the phone.
flashing via flashtool is also not successful.
what can we do now? other then sending it in...
xenocide976 said:
i have the exact same problem with you. locked bootloader as well
i updated to 4.2.2 with wipe everything.
Backed up TA partition using tool v9.3
after that the device does not wake up after a reboot.
no amount of power+vol up/down can boot the phone.
flashing via flashtool is also not successful.
what can we do now? other then sending it in...
Click to expand...
Click to collapse
Also no fastboot?
Sent from my C6603 using xda app-developers app
krabappel2548 said:
Also no fastboot?
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
yes fast boot also dont work
as i said before in pakistan there is no sony official service center today i bring my xperia z to local software flasher market and they failed to flash software in it
you developers are only my hope now please do some thing
I don't know if this method will work for you or not.. My XZ went dead the same way but I left it to charge for hours. Later it started.
Sent from my MT11i

[sos] xperia z not booting

Hey guys! My Z has been awesome these past few months and w the recent 4.2.2 update, its been PERFECT. I finally rooted it last week and installed CWM for locked BLs. However I haven't been able to boot to recovery so I downloaded an app called Quick Boot (Reboot ). The thing is, when I selected "boot to recovery", my screen went black and now I can't start my phone!
The LED also does not light when plugged in, and I've tried every possible button combination with no results.
Please help! Thanks!
Try holding power and volume up. You should feel a vibration and the phone should restart.
Sent from my C6603 using Tapatalk 2
kingvortex said:
Try holding power and volume up. You should feel a vibration and the phone should restart.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
Hey I tried that, and also all three buttons and power + volume down, but none of them gave any response whatsoever. :crying:
You could try flashing a stock rom with no wipe with flashtool.
http://forum.xda-developers.com/showthread.php?t=2240614
Just grab one of the generic 423 ftf available in the general section. Make sure you follow part 6 of the tutorial regarding keeping your data.
Sent from my C6603 using Tapatalk 2
kingvortex said:
You could try flashing a stock rom with no wipe with flashtool.
http://forum.xda-developers.com/showthread.php?t=2240614
Just grab one of the generic 423 ftf available in the general section. Make sure you follow part 6 of the tutorial regarding keeping your data.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
Yea..the problem is, I can't even get my phone to boot in to any mode, or get detected on my PC! Is it possible this app bricked my phone? . All the reviews said that I works
jwveggie said:
Yea..the problem is, I can't even get my phone to boot in to any mode, or get detected on my PC! Is it possible this app bricked my phone? . All the reviews said that I works
Click to expand...
Click to collapse
Your phone doesn't need to be booted to use flashtool. Just give it a try. If it doesn't work, you could try doing a repair with SUS - http://www.sonymobile.com/in/tools/update-service/
As for that app, I doubt it has bricked your phone. Any app that has a 'reboot to recovery' option will not work on our device as we do not have a recovery partition. There is a fix for this in the original development section that allows 'reboot to recovery' to function properly.
Sent from my C6603 using Tapatalk 2
kingvortex said:
Your phone doesn't need to be booted to use flashtool. Just give it a try. If it doesn't work, you could try doing a repair with SUS -
As for that app, I doubt it has bricked your phone. Any app that has a 'reboot to recovery' option will not work on our device as we do not have a recovery partition. There is a fix for this in the original development section that allows 'reboot to recovery' to function properly.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
I didn't know that! Tried both. Flashtool doesnt detect my device...neither does SUS
This is very strange. When you held power and volume up, how long did you wait? You have to hold them for around 15 seconds IIRC.
Sent from my C6603 using Tapatalk 2
kingvortex said:
This is very strange. When you held power and volume up, how long did you wait? You have to hold them for around 15 seconds IIRC.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
It sure is... I held it for as long as I could! Same for the other combinations.
I'm out of ideas then. Sorry.
Sent from my C6603 using Tapatalk 2
kingvortex said:
I'm out of ideas then. Sorry.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the attempt though! Hopefully someone else knows what to do :fingers-crossed:
jwveggie said:
Hey guys! My Z has been awesome these past few months and w the recent 4.2.2 update, its been PERFECT. I finally rooted it last week and installed CWM for locked BLs. However I haven't been able to boot to recovery so I downloaded an app called Quick Boot (Reboot ). The thing is, when I selected "boot to recovery", my screen went black and now I can't start my phone!
The LED also does not light when plugged in, and I've tried every possible button combination with no results.
Please help! Thanks!
Click to expand...
Click to collapse
Try download ftf relevant with your device 6602/6603.
http://forum.xda-developers.com/showthread.php?p=42917602
use flashtool(new version) choose that ftf. plug your device and hold vol down.
Hope can solve that.
Sent from my C6602 using xda premium
YudiA1 said:
Try download ftf relevant with your device 6602/6603.
http://forum.xda-developers.com/showthread.php?p=42917602
use flashtool(new version) choose that ftf. plug your device and hold vol down.
Hope can solve that.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
I already suggested that in post #4.
The OP says flashtool does not detect their phone.
Sent from my C6603 using Tapatalk 2
Im sorry not read that. coz i ever got like that, and use that way and solved.
Sent from my C6602 using xda premium
What the hell, I'll try help. If you're in windows 8 you need to install the fastboot drivers booting without driver signing, what os are you on? if you need more help reply or check my profile for my skype user.
Try to push pwr + vol down to enter into flasboot.
You should also try pwr + vol up until the phone vibrates 3 times. That's a hard reboot.
Lemagex said:
What the hell, I'll try help. If you're in windows 8 you need to install the fastboot drivers booting without driver signing, what os are you on? if you need more help reply or check my profile for my skype user.
Click to expand...
Click to collapse
Yup I've done that, but my phone isn't able to enter fastboot mode (Volume down + USB) for both Flashtool and SUS.
YudiA1 said:
Try download ftf relevant with your device 6602/6603.
http://forum.xda-developers.com/showthread.php?p=42917602
use flashtool(new version) choose that ftf. plug your device and hold vol down.
Hope can solve that.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Tried that! Didn't detect
jwveggie said:
Yup I've done that, but my phone isn't able to enter fastboot mode (Volume down + USB) for both Flashtool and SUS.
Tried that! Didn't detect
Click to expand...
Click to collapse
fastboot is vol up + usb while device powered off. FLASH mode is vol down. What exactly do you get from the device? Any feedback at all? Backlight? Vibration?
Gosh. This 5 minute rule...
pch.radu said:
Try to push pwr + vol down to enter into flasboot.
You should also try pwr + vol up until the phone vibrates 3 times. That's a hard reboot.
Click to expand...
Click to collapse
Lemagex said:
fastboot is vol up + usb while device powered off. FLASH mode is vol down. What exactly do you get from the device? Any feedback at all? Backlight? Vibration?
Click to expand...
Click to collapse
Oops. Well anyway, all of these button combinations haven't worked. No vibration/LED blink whatsoever no matter how long they're held.
jwveggie said:
Gosh. This 5 minute rule...
Oops. Well anyway, all of these button combinations haven't worked. No vibration/LED blink whatsoever no matter how long they're held.
Click to expand...
Click to collapse
I'd hook it up to the charger for about 20 mins then, and THEN Retry.

Categories

Resources