Related
I recently upgraded my Note to official ICS (OTA) and I'm not liking it AT ALL! Now I really want to get far away from this update as possible and I'd like to switch to a CM9 nightly Rom. I've that now that I have upgraded to the official ICS Rom, I run the risk of super bricking my device. So now I ask you to help me make sure the following is correct so that I may move on from this wretched update:
DO NOT perform wipes if you are on original Samsung ICS
DO NOT perform wipes if you are on a original Samsung kernel??
Flash back to original Gingerbread Rom using odin BEFORE flashing to CM9
Flash to different kernel??
I've flashed millions of Roms but this one is scary and I just want to make sure haven't missed anything... Have I?
Thanks for you help!!
John J
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Akiainavas said:
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Click to expand...
Click to collapse
Thanks a lot man!! This is pretty much what I thought but I wanted to make ABSOLUTE sure! Cheers!
John J
So is the super-brick BUG on the official ICS OTA?? OMG
And yeah go back to gingerbrear via odin, get root then flash any CM9 tru CWM no problems...
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
darkmuck said:
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
Click to expand...
Click to collapse
There is no need to unroot first. You can flash stock GB rom directly via Odin.
I've now flashed to GB but before I move on to a CM9 nightly, do you recommend I flash the CM9 kernel as well? Seems like it is not a prerequisite but I would like to make sure. Thanks.
John J
afaik, when flashing a CM9 Nightly, the eligible kernel is built in, so no need to flash anything but the ROM.
i'm on one of imilkas first CM9 port and it says [email protected] #1 under Kernel version in settings.
Yes. The correct kernel is included in the nightly.
Ok, I hate to be a noob, but I feel that I have to in this case.
I just got a new unlocked G-Note and it has has gingerbread. However I want to install ICS, Been trying to research through the threads myself, but its overwhelming for someone who hasn't been here to follow the threads from the beginning
I would appreciate some advice or steps to safely go from bone stock G-note to Official Samsung ICS
Current "About phone" Info:
Model number
GT-N7000
Android Version
2.3.6
Baseband Version
N7000XXLB2
Kernel Version
2.6.35.7-N7000XXLC1-CL-CL1003701
[email protected] #2
Build number
GINGERBREAD.XXLC1
PDA: N7000XXLC1
PHONE: N7000XXLB2
CSC: N7000OXXLB3
The guilds quickly get confusing, I have done a great deal of flashing device over the years, but have never been this lost.
Help/warnings are welcome
Hey man! Seems like you want to upgrade from GB to ICS on the Galaxy Note. GB is far more stable and bug free on the Galaxy Note. This is one device where upgrading to ICS is more of a downgrade. So to be honest i would recommend that you stay on GB until samsung get out a stable ICS ROM for the Note.
Firstly what i would recommend you to do is download chinfires app called Gotbrick.(Google it) Install the app on your Note on GB and see the verdict. The verdict will tell u if your Note has the eMMC brickbug. If the verdict tells "Danger" then upgrading to ICS is equal to suicide because all stock ICS kernels are known to have the eMMC_Erase functionality which will cause this bug to superbrick your phone.
However if you still want to take the rist then the steps to upgrade are: you can try the connecting your phone to your PC and run kies. It will automaticly check for updates and install them. Another method is using the phone itself. Goto Settings>About Phone>Software Update and check for updates. It should update to ICS automatically.
If none of the above work then use the ODIN method:
For the ODIN method the steps are:
1- Register and Download the Stock ICS for your region from here:http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
2-After download you should get a zip file. Unzip the content. You will get a .tar.md5 file.
3- Next get ODIN v1.83 (download it if u dont have it)
4- Make sure you have Samsung Drivers Installed on your PC and put your phone in download mode(Volume Down + Home + Power) and connect it to your PC using USB Cable
4- Then run ODIN as admin and then click the PDA button and choose the .md5 file you extracted. Make sure only Auto Reboot and F.Reset Time are checked in ODIN. Then click the start button and Let it flash the new Firmware.
After flash complete you should have Stock ICS 4.0.3 on your Note. What i would recommend is to flash a safe ICS kernel like Speedmod N7000 k3 on it to prevent it from getting bricked.
If this helped please click the Thanks button! Cheers!
Sorry to be a noob,
but i couldn't get a download link for the *chinfire's app Gotbrick* to check whether my SGN is not from *DANGER* to Stock ics update. =(
Looks like it's "Chainfire"
http://forum.xda-developers.com/showthread.php?t=1693704
OK, here's my experience with upgrading to ICS. I've had my note for about 2 months and have been following the forum trying to learn. It's very confusing to me and I was afraid to do anything so I did nothing. I live in Melbourne, FL and use Straight Talk. My note was purchased from Newegg and had a Brazil build number. Several days ago someone posted that Brazil was now on the "update to ICS" list, so I thought I'd check it out with kies. I use linux so I had to boot into my Windows 7 Ultimate OS(ugh). I opened kies and it said it could be updated to newer version, so I updated kies. Then I pluged in my note and low and behold it said update version available! I sweated a little and decided to go for it. It updated smooth as silk with no problems and now I have ICS! I have all the apps with all the data I had before update.
The new ICS is much quicker and smoother than GB, the difference is immediately noticable.
All the phone info changed to new numbers(android, baseband, kernel version and build number) and I didn't think to write it down so I can't post what it was. Anyway hope this info helps someone.
I agree that the update makes the UI quicker but however it makes the brick bug effective in the ICS kernel. With GB although the UI is slower, there is no risk of brick bug.
So its ur choice to choose between a relatively slower UI with no brick bug Or a faster UI but risking your phone. I recommend installing a custom GB rom which is stable and fast.
Sent from my GT-N7000 using xda premium
Hey, so I got really excited when ics came out and instanly went out to flash the repack (stupid, I know) and I checked and I do have the brickbug. So I know that I shouldn't flash using clockwork or do a factory reset and I wanna take your advice and flash a safe kernel like Abyss.
So I just wanna know if I should just flash it through clockwork and then I'll be ok right? My phone's performance and everything wouldn't be affected right? Also would prefer rather not downgrading to GB.
Thanks!
So yea, I do have the bug, but before I found out, I flashed ICS. Panic when I found out I could brick my phone, then flashed back
Question: Even though I have the bug, if I flash Stock Indian ICS, then Speedmod, will I be safe?
Daman1997 said:
Hey, so I got really excited when ics came out and instanly went out to flash the repack (stupid, I know) and I checked and I do have the brickbug. So I know that I shouldn't flash using clockwork or do a factory reset and I wanna take your advice and flash a safe kernel like Abyss.
So I just wanna know if I should just flash it through clockwork and then I'll be ok right? My phone's performance and everything wouldn't be affected right? Also would prefer rather not downgrading to GB.
Thanks!
Click to expand...
Click to collapse
Ok firstly i would like to say that if you do have the bug and are already on ICS then instead of downgrading to Gingerbread, try to flash a safe kernel. But stay away from Clockworkmod. Do not flash using CWM. Instead use ODIN to flash any kernel from the following:
Speedmod kernel
Franco Kernel
CM9 Knightlies
The best of these kernel is Speedmod kernel which has the best performance and best battery life. I have already made a tutorial on how to do this, just follow the steps on the tutorial found here: http://www.youtube.com/watch?v=o5K5Wm_201Y
---------- Post added at 11:36 AM ---------- Previous post was at 11:31 AM ----------
DJTJ said:
So yea, I do have the bug, but before I found out, I flashed ICS. Panic when I found out I could brick my phone, then flashed back
Question: Even though I have the bug, if I flash Stock Indian ICS, then Speedmod, will I be safe?
Click to expand...
Click to collapse
Before you flash anything tell me what are you running currently? are you running a stock ICS or a Custom ROM? If you are running stock ICS then you can easily flash Speedmod kernel with ODIN and you will be safe. You can see my tutorial here: http://www.youtube.com/watch?v=o5K5Wm_201Y
endingcolt007 said:
Ok firstly i would like to say that if you do have the bug and are already on ICS then instead of downgrading to Gingerbread, try to flash a safe kernel. But stay away from Clockworkmod. Do not flash using CWM. Instead use ODIN to flash any kernel from the following:
Speedmod kernel
Franco Kernel
CM9 Knightlies
The best of these kernel is Speedmod kernel which has the best performance and best battery life. I have already made a tutorial on how to do this, just follow the steps on the tutorial found here:
Click to expand...
Click to collapse
Ok, really appreciate the advice will try the speedmod kernel through ODIN, but I also have mobile ODIN installed, but I shouldn't use that then I assume. Thanks again!
Currently on a leaked LPY ICS and I have the dangerous kernel. I'm suffering from poor battery life at the moment.
What do you suggest I do? Should I go back to GB or give a new kernel a try?
If I flash a new kernel over LPY will it be safe to perform a factory reset?
Hello,
I've being reading a lot this forums and I really wish to Flash a custom Rom.
My steps so far:
I updated my Galaxy Note N7000 throught Odin to version 4.0.4.
Then I rooted the phone using CWM folling the instructions from dr.ketan.
Can I just simply flash a rom using CWM or should I downgrade the phone to GB? Do I have to flash a custom Kernel or no? BTW mine is stock.
I really wish to flash a rom but i dont want to brick my phone.
Sorry for my English, is not my main language.
Thanks
If you're familiar with using Odin and flashing ROMs like that, then I mostly recommend reverting to GB, getting root + CWM also according to dr. Ketan's guide. You'll find stock GB and how to root them in the Development Section Stickies
So far, the only 100% safe way to flash custom ROMs (ICS or others) through CWM is with a working Gingerbread CWM. Some would recommend flashing through Abyss Kernel, or flashing through mobile Odin.
Again, and this is coming from one of our top-notch devs... The only 100% safe way is to flash from a rooted GB.
Also, while we're on it, may I also recommend Cyanogen Mod 9 (you'll find it in the General section of the forum) and CM9 - based ROMs. They have a safe kernel, that means you can flash and full-wipe as much as you want from CM, without reverting back to GB. CM9 also gave me the best performance and battery consumption so far. Only disadvantage would be if you don't like the stock Android look and would rather have an S3 - feel or TouchWiz or whatever.
Also VERY IMPORTANT!!! DO NOT FULL-WIPE (Factory Reset) from your ICS!!! That's how phones get bricked, that's why you shouldn't flash from stock rooted ICS!
Best of luck and let me know if you need anything else!
Cheers and welcome to XDA
Helpful Links:
- Stock ROMs
- Rooting and CWM
- Cyanogen Mod 9 (If you decide to use it)
eug3n91 said:
If you're familiar with using Odin and flashing ROMs like that, then I mostly recommend reverting to GB, getting root + CWM also according to dr. Ketan's guide. You'll find stock GB and how to root them in the Development Section Stickies
So far, the only 100% safe way to flash custom ROMs (ICS or others) through CWM is with a working Gingerbread CWM. Some would recommend flashing through Abyss Kernel, or flashing through mobile Odin.
Again, and this is coming from one of our top-notch devs... The only 100% safe way is to flash from a rooted GB.
Also, while we're on it, may I also recommend Cyanogen Mod 9 (you'll find it in the General section of the forum) and CM9 - based ROMs. They have a safe kernel, that means you can flash and full-wipe as much as you want from CM, without reverting back to GB. CM9 also gave me the best performance and battery consumption so far. Only disadvantage would be if you don't like the stock Android look and would rather have an S3 - feel or TouchWiz or whatever.
Also VERY IMPORTANT!!! DO NOT FULL-WIPE (Factory Reset) from your ICS!!! That's how phones get bricked, that's why you shouldn't flash from stock rooted ICS!
Best of luck and let me know if you need anything else!
Cheers and welcome to XDA
Helpful Links:
- Stock ROMs
- Rooting and CWM
- Cyanogen Mod 9 (If you decide to use it)
Click to expand...
Click to collapse
^^ This
eug3n91 said:
If you're familiar with using Odin and flashing ROMs like that, then I mostly recommend reverting to GB, getting root + CWM also according to dr. Ketan's guide. You'll find stock GB and how to root them in the Development Section Stickies
So far, the only 100% safe way to flash custom ROMs (ICS or others) through CWM is with a working Gingerbread CWM. Some would recommend flashing through Abyss Kernel, or flashing through mobile Odin.
Again, and this is coming from one of our top-notch devs... The only 100% safe way is to flash from a rooted GB.
Also, while we're on it, may I also recommend Cyanogen Mod 9 (you'll find it in the General section of the forum) and CM9 - based ROMs. They have a safe kernel, that means you can flash and full-wipe as much as you want from CM, without reverting back to GB. CM9 also gave me the best performance and battery consumption so far. Only disadvantage would be if you don't like the stock Android look and would rather have an S3 - feel or TouchWiz or whatever.
Also VERY IMPORTANT!!! DO NOT FULL-WIPE (Factory Reset) from your ICS!!! That's how phones get bricked, that's why you shouldn't flash from stock rooted ICS!
Best of luck and let me know if you need anything else!
Cheers and welcome to XDA
Helpful Links:
- Stock ROMs
- Rooting and CWM
- Cyanogen Mod 9 (If you decide to use it)
Click to expand...
Click to collapse
i found this a very good summary and guide of all thats going on here. i too want to try all the custom roms,
suppose one has a certain ics TW rom installed but would like to change the kernel to a another one, then which is the right method please ?pc odin, mobile odin, or CMW that comes with that particular rom installed ?
rraaka said:
i found this a very good summary and guide of all thats going on here. i too want to try all the custom roms,
suppose one has a certain ics TW rom installed but would like to change the kernel to a another one, then which is the right method please ?pc odin, mobile odin, or CMW that comes with that particular rom installed ?
Click to expand...
Click to collapse
That mostly depends. Best way would be to either ask in the ROM's thread or in the kernel's thread. Some ROMs might recommend you flashed in the following sequence:
- Reboot into recovery
- Flash Abyss Kernel 4.2 Redpill (Original or custom logo, doesn't matter)
- IMPORTANT! Go to advanced => Reboot recovery
- Flash the kernel of your choice
- Reboot system
Others might recommend you flashed directly from the included CWM. Again, I'm not sure there's really a rule to this...
So far the only totally safe, non-headache kernel + ROM is Cyanogen and all Cyanogen-based, like Paranoid, Asylum and a few others. If you run those you can flash and full-wipe at will. With others, you should either ask or do a little thread-searching.
And also make sure that if you're running a TouchWiz ROM, flash a TouchWiz kernel. That's...really important, for obvious reasons and the type should be specified in the kernel's description or first post
Got a problem!!!
I flashed a Stock GB rom and the phone is giving me the next problem:
"Unfortunately, the process com.android.phone has stopped"
What should I do?????
darielsantana said:
I flashed a Stock GB rom and the phone is giving me the next problem:
"Unfortunately, the process com.android.phone has stopped"
What should I do?????
Click to expand...
Click to collapse
Just go into recovery and do a full-wipe. If the problem persists, try another ROM.
Full-wipe should do the trick, though.
eug3n91 said:
Just go into recovery and do a full-wipe. If the problem persists, try another ROM.
Full-wipe should do the trick, though.
Click to expand...
Click to collapse
I think i bricked my phone . I did the full-wipe and i cant get to recovery and when i try to flash a rom it stops at "FACTORYFS"
darielsantana said:
I think i bricked my phone . I did the full-wipe and i cant get to recovery and when i try to flash a rom it stops at "FACTORYFS"
Click to expand...
Click to collapse
I flash a Kernel and now can get to Recovery, what should i do?
darielsantana said:
I think i bricked my phone . I did the full-wipe and i cant get to recovery and when i try to flash a rom it stops at "FACTORYFS"
Click to expand...
Click to collapse
Uhm...I think you full - wiped from ICS... maybe accidentally flashed an ICS stock ROM instead of GB?
GB stock kernels don't do that...
First of all you should consider reading a few threads of people that have already been through this and gotten out ok.
Chances are you'll be able to flash a new ROM from there, but a little research is in order. I don't really know your exact situation (what ROM you have on and what kernel),and I haven't been in this pickle myself, so I may not be the best to advise you on this.
However, it is VERY unlikely that you're on GB... The emmc bug that you've described is typical for early ICS builds.
Hello dear XDA peeps
I need some help here or maybe I dont, thats why Im asking!
I rooted and followed all the guides a couple of months back, must be over half a year, and installed ICS Stunner 1.4.19. At that time that was simply the most interesting for my Note. These days when more stable ICS roms seem much more appealing. Altho Im thinking Im waiting for a stable working beta for JB
Since I havent done some ROM loving for quite a while Im quite confused where to begin, do I need to upgrade CWM Manager first? I have version 3.15. Or can I go straight on new ROMs? I spent some time reading about updating CWM today and it seems I have a really dangerous kernel version, 3.0.15-I9220ZLP5-CL295568 and if I understand the CWM Manager thread correctly thats part of the dangerous kernels. Which seems quite dangerous to update it since I cant find a safe version of CWM Manager to update to.
So the bottom question, do I need to update CWM Manager first to do anything safe or update the kernel first to perhaps an old safe rooted GB kernel? All the guides and stuff says the safest way is to first install an old safe GB kernel and then install a ICS or JB kernel (not at the moment tho) but is this the truth in my case?
Anyway, I really appreciate if you could give me some advice here
Thanx in advance
hobs0n said:
Hello dear XDA peeps
I need some help here or maybe I dont, thats why Im asking!
I rooted and followed all the guides a couple of months back, must be over half a year, and installed ICS Stunner 1.4.19. At that time that was simply the most interesting for my Note. These days when more stable ICS roms seem much more appealing. Altho Im thinking Im waiting for a stable working beta for JB
Since I havent done some ROM loving for quite a while Im quite confused where to begin, do I need to upgrade CWM Manager first? I have version 3.15. Or can I go straight on new ROMs? I spent some time reading about updating CWM today and it seems I have a really dangerous kernel version, 3.0.15-I9220ZLP5-CL295568 and if I understand the CWM Manager thread correctly thats part of the dangerous kernels. Which seems quite dangerous to update it since I cant find a safe version of CWM Manager to update to.
So the bottom question, do I need to update CWM Manager first to do anything safe or update the kernel first to perhaps an old safe rooted GB kernel? All the guides and stuff says the safest way is to first install an old safe GB kernel and then install a ICS or JB kernel (not at the moment tho) but is this the truth in my case?
Anyway, I really appreciate if you could give me some advice here
Thanx in advance
Click to expand...
Click to collapse
There is newer cf root that is 5.6. This is a safe rooted stock kernel by chainfire with CWM manager.
The devs suggest when installing TW ics custom rom it is recommended to install it while already in ics rom.
First install stock gingerbread rom, while in gingerbread rom do the wiping data,cache, and dalvik and then flash ics rom for clean installation. DO NOT WIPE IN STOCK ICS ROM, DANGEROUS. READ THE WARNING IN THE FORUM.
You can choose any tw custom rom you like.
If you want suggestion on what custom rom just ask i gave you one.
Ok, still not sure what do to first but it is safe to install a GB rom first? Updating CWM isn't that important? What I meant was that I still cant find a fitting version to install. Nearest version is: CF-Root-SGN_DD_ODD_LP8-v5.5-CWM5.zip but thats on the danger list so Im still confused about what version to download.. :/
Perhaps CF-Root-SGN_DD_ODD_LP8-v5.6-CWM5.zip is safe to install tho?
EDIT: I saw that I had cf-root version 5.2, it was CWM Manager that was version 3.15
EDIT: getting a new baseband comes with a rom, no need to install baseband seperatly? For example, getting Cassie's XtraLiteRom Version X LC1 295Mb is getting my baseband LC1 too?
hobs0n said:
Ok, still not sure what do to first but it is safe to install a GB rom first? Updating CWM isn't that important? What I meant was that I still cant find a fitting version to install. Nearest version is: CF-Root-SGN_DD_ODD_LP8-v5.5-CWM5.zip but thats on the danger list so Im still confused about what version to download.. :/
Perhaps CF-Root-SGN_DD_ODD_LP8-v5.6-CWM5.zip is safe to install tho?
EDIT: I saw that I had cf-root version 5.2, it was CWM Manager that was version 3.15
EDIT: getting a new baseband comes with a rom, no need to install baseband seperatly? For example, getting Cassie's XtraLiteRom Version X LC1 295Mb is getting my baseband LC1 too?
Click to expand...
Click to collapse
You can flash the cassies custom rom directly over the stunner rom if you want to, just be sure to use ABYSS KERNEL for wiping.
Base band also known as modem. There are many flashable modem to choose so no problem what modem you Want.
If you want to install cassies latest custom rom you will get also the latest CWM recovery and manager.
Uhm ok.. so much information Im confused as usual
I cant find exactly abyss kernel. Can it be this one? http://forum.xda-developers.com/showthread.php?t=1362424/
And can I flash all roms via CWM or do I have to use PC ODIN?
EDIT: found the abyss note kernel, really slow downloading tho.
jonpaslim said:
You can flash the cassies custom rom directly over the stunner rom if you want to, just be sure to use ABYSS KERNEL for wiping.
Base band also known as modem. There are many flashable modem to choose so no problem what modem you Want.
If you want to install cassies latest custom rom you will get also the latest CWM recovery and manager.
Click to expand...
Click to collapse
hobs0n said:
Uhm ok.. so much information Im confused as usual
I cant find exactly abyss kernel. Can it be this one? http://forum.xda-developers.com/showthread.php?t=1362424/
And can I flash all roms via CWM or do I have to use PC ODIN?
EDIT: found the abyss note kernel, really slow downloading tho.
Click to expand...
Click to collapse
Go to cassies thread there is ABYSS there to download and operating procedure on how to install safely.
maybe this will help?
hey,
watch the vids from Cursed4eva on youtube - this one in particular
he is very clear and shows you what to do.
Thanx peeps!! Now Im off to messing with Parandroid Thanx again!
Hello guys, im sure similar questions have been asked before but I realy want to be on the safe side with this so im asking here anyway.
Currently I have an unrooted n7000 running android 4.0.4 ICS. I am getting tired of samsungs touchwiz interface and I want the smoothness of jellybean, therefore I want to root my phone and flash a new ROM. I have found this rom which looks like it has some nice features. But the problem im having is that I have no experience with Rooting for the past 2 days I have looked around for info on how to root my phone. I know that I need to flash a "safe kernel" before flashing a new rom. However, I havn't found that much info on flashing a new kernel. What seems to be the most "advertised" method is philz kernel.
On the philz kernel thread I have found some instructions, however I don't know which download, if I have understood it correctly, I should download the version with the same letters as my kernel version. My current kernelversion is 3.0.15 - N7000XXLRI - CL811902 [email protected] #3 SMP PREEMT Wed Jul 11 20:04:41 kst 2012.
So I went looking for a XXLRI download and found some which had the XXLRI in them. The problem is that all of them are 2.7 or lower as well as a "Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:". This leads me to believe that I need to have 3.71 installed before applying this kernel. And from what I have read, I will need at least 3.99 to use CarbonRom. But the only other versions are <2.7. Have I missunderstood something or is there simply no version of PhilZ kernel for my phone.
If im not misstaken, after I have installed PhilZ kernel, I should be able to flash CarbonRom without problems. Is that true?
Also, just for saftey, I would like some form of backup of my current ROM, I know you are able to acieve that with CWM and my suspiccion is that PhilZ will be able to do that (based on my limited understanding of this, PhilZ contains a version of CWM). Also, im guessing that installing philz won't wipe the data on my phone.
I am greatefull for all your awnsers.
ICS.. most of the ics kernel will work with your rom.. use any kernel thats updated to 3.99 like XXLRT or DDLRB.. download the zip version and place it on ext SD card.. boot into recovery and choose apply update from external storage and flash the kernel.. you will be rooted with safe kernel and cwm.. now you can install the carbon rom .. follow full wipe procedure.
nokiamodeln91 said:
ICS.. most of the ics kernel will work with your rom.. use any kernel thats updated to 3.99 like XXLRT or DDLRB.. download the zip version and place it on ext SD card.. boot into recovery and choose apply update from external storage and flash the kernel.. you will be rooted with safe kernel and cwm.. now you can install the carbon rom .. follow full wipe procedure.
Click to expand...
Click to collapse
Thanks for the awnser, just one more question, do most roms past 3.99 work so I can use a later version, or should I just use 3.99 ones?
most of the Kernels updated over 3.99 are JB kernels so no.. install a ICS kernel
nokiamodeln91 said:
most of the Kernels updated over 3.99 are JB kernels so no.. install a ICS kernel
Click to expand...
Click to collapse
Ok, hopefully I got this now. In the list of the list beneath "Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:" I found this kernel "PhilZ-cwm6-XXLRW-SFR-v3.99" Judging from what I can tell, the download for the 3.99 kernels are just updates so I will need to download a version before it. So, I found this file: XXLRW-SFR
mediafire.com/file/sunp1b....71-signed.zip
mediafire.com/file/3gwdl8...R-3.71.tar.md5
It has the same XXLRW-SFR and im guessing it's the 3.71 file. Above it it says < Update to PhilZ Touch 3.39 based recovery>. Which im guessing is telling me that I should update this one to 3.99 with the previously mentioned file. have I finaly got this right?
you can even use the 3.71
Awesome, I have now installed the kernel successfully. Im currently backuping using the "Backup" feature in PhilZ.
I guess I should move on to the ROM now, Like I said, I want to install this. Will I be able to install it right now without doing anything else. (I have only installed PhilZ 3.71) Also, will I be able to use the backup I made to restore back to my original ROM in case I want to?
I hope you don't mind me asking this many questions. I just don't want to mess this upp.
Edit: I found this in the CarbonRom thread Only Philz kernel 3.99 supports rom installation or else you will get Status error.
I will just go ahead and install 3.99. But is there anything else I should know before I install the new ROM?
thats i think for JB kernels.. but you can always update. Yes you can restore the backup you made
Well, CarbonRom is a JB rom if im not completley misstaken. What would happen if I try to install the rom on a kernel that dosn't support it? For example installing it when I have philZ 3.99 and that dons't work? Will it just give an error?
That's does not matter as when you install the rom it will replace the kernel with the one it has. You can use any kernel to install but later you need to use a compatible kernel to run the rom.