Hello,
I have been trying to flash a kernel that has htclogo2menu and no matter what kernel I flash or what rom I try I always get a black screen after flashing the kernel and end up just having to re install the rom and staying with the Kernel that came with whatever rom I am using, I have tried about 4 different roms all with the same result, any ideas? I am using twrp if that should matter
Related
I'm pretty new to this still.so sorry if this is posted somewhere else.but I have a question about flashing a different kernal on the miui Tom.do I use CWM3?or can I use the recovery from ROM Manager?cuz I tried flashing the platypus kernel using CWM recovery from ROM manager when I was using miui on my last phone.but it never worked.it always got stuck on the Samsung screen after the att screen turned off. Was I doin it wrong?can someone tell me the steps to flash a different kernel on miui please? I just wanna make sure I did it right. Thank you
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
U should root ur device...flash clockwork mod and then flash rom
Sent from my GT-S5570 using xda premium
How do you think I flashed the rom in the first place?
Device rooted, latest version of CWM.
innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
hi
use SUTL and flash stock rom then get the CWM and install the CM7 via CWM it should work
this CM7 is on .35 based kernel and utterchaos kernel is .32 , that is creating the problem .....
So, if you want to try this rom, first install TJ's RC3 rom than install this rom .....
if u dontt want to try this now (as u have bricked ur phone once ) ....
just install stock GB rom via SUT ....
innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
dude since edowar's latest cm7 is Based on a new kernel 2.6.35.7, u have to flash stock sharp rom through SUT. then use tj's cwm recovery for latest kernal and flash cm7 27-3-2012
else you can flash UPDATE ROM 31-12 directly it is also good rom
So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?
innocuous76 said:
So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?
Click to expand...
Click to collapse
No u cant. But if you're from stock GB you could flash older CM7 based on the. 32 kernel instead
Sent from my CSL-MI410 using XDA
Hi, i'm running Teamhacksungs build 17, and just tried upgrading to new Semaphore 1.2 (regular and s version).
Started by running kernel cleaner script from CWM.
First tried the regular version, and phone would not boot anymore past the Semaphore kernel splash screen.
Then i tried the s version (aka. bigmem configuration), and after succesful flash trough cwm and boot, now my phone freezes at kernel splash screen. To make matters worst, CWM through three button combo is not working anymore!
Bootloader still works, so i was wondering, is it possible to flash new ics kernel with CWM through odin? I really dont want to re-stock my phone with GB and then start the whole ics upgrade process all over again, specially cos my backups are not fresh . (I know, stupid me).
Any help would be great!!
I think you can flash mid night kernel using odin.
Sent from my GT-I9000 using Tapatalk 2
Try another rom
This rom cleanAOKP 1.0.2 have already update to semaphore 1.2
http://forum.xda-developers.com/showthread.php?t=1552124
Hello XDA
Again I need your help!
My Note is bricked (I think), because it always stuck @DATA.IMG or @DATAFS. So I found the way with the patched pit file. Whatever I'm able to flash ROM's with patched PIT and ODIN.
So I flashed a 3-part GB with custom PIT -> Worked
Than I flashed 1-part ICS without custom PIT -> Works (I did many reboots until "Install Applications" went away)
CF-Root + CWM for that ROM (LQ3) -> Works
But then when I try to flash a Custom ROM (I'd like to have Rocket ROM) with AbyssKernel (Which I flashed in CWM) the ROM flashes, everything OK. But when I try to boot, sometimes it's stuck @N7000 Logo or it boots and stucks @SAMSUNG Logo or sometimes the ROM even loads but hangs everytime or reboots all the time (Totaly unusable). But all that only with CUSTOM ROM.
Why I'm able to use the stock ROM's but the CUSTOM ROM's (Like Rocket ROM) aren't usable? Any help? :/
Thanks in advance!
Any suggestions? :/ Thanks!
If stock roms work then custom roms should also work. Still the procedures to install custom rom may differ from one rom to another. And sometime a certain rom may not work for you. Should try one or few more other customs and it should work.
cheers,
Hii check your internal storage if it is around 8 gb, as you said you bricked then flashed with patched pit, then you wont be able to flash big custom roms, try for small custom roms or rather Asylum or PA rom or if you want TW roms look for rom which is under 400 MB.
from abyss kernel, do data/cache/dalvik wipe and reinstall your custom rom again.
Sent from my GT-P1010 using XDA
Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.
get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work
Iconia500 said:
Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.
Click to expand...
Click to collapse
When u flash kerenel u have to reboot into recovery so that flashing could take effect.
PhilZ JB kernel's are safe to wipe and philZ kernel's are best for TW based ROM's.
So if u running CM10,CM10.1,AOSP,AOKP,PA ROM's u shuold look for Hydra,Franco,etc..
And make sure that u reboot into recovery when u flash kerenel...
nokiamodeln91 said:
get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work
Click to expand...
Click to collapse
Hi thanks for the reply, I managed to flash the kernel with mobile odin, but I'm still unable to flash in cwm.
Are you able to format system with other kernel?
nokiamodeln91 said:
Are you able to format system with other kernel?
Click to expand...
Click to collapse
Yes and I always do before flashing a rom.
Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz
nokiamodeln91 said:
Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz
Click to expand...
Click to collapse
Thanks for your help anyway, at least I'm on the latest philz kernel now.