Database Develop

AT&T Tilt broken screen

My sister's boyfriend gave me his Tilt because he bought a Blackberry. Long story, he broke the first Tilt, they replaced it for him and he broke it again and he was told it would cost $500 to repair... so he bought the new phone and gave me the Tilt for free. So here's the deal: it will charge and turn on.. but only stays on for a few seconds. The LCD is cracked... pretty obvious. However, I was wondering if there was another problem since the phone won't stay on or if it's typical for it to turn off with just a broken screen. This is basically the sequence of events:
Hit the power button, a green LED on the left of the ear piece lights up and the phone vibrates for a second.
The screen then lights up but doesn't display anything obviously... other then the black liquid and white back lighting.
The screen stays on for about 15 seconds, shuts off, the keyboard lights up for a VERY quick second and then that's it... nothing else.
I'm wondering if I should try and find a replacement screen or if there is something else wrong with it. I saw the screen on phoneystore.com a while back but the site has said it's down for maintenance every other time I checked.
Other Info - I took the back cover off and above and slightly to the right of the camera is a black dot that says "VOID".
Any help is appreciated.
Thanks.

Normally you only get the vibrate if you are turning on from the completely off position.
From the completely off position you have to long press the on/off button - is this what you are doing?
In any case, it's difficult to tell if there are any other problems. You could try tracking down on this site, one of thoses applications that lets you see / control the device from your PC.
That $500 figure is I assume for someone to do the repair for you, 'osc the screen would not cost anything like that.
Mike

Also that "void" dot you see I think is just over a screw and if you go inside your tilt you'd have to poke through that and it would void your warranty. So thats not because the screen is broken.

well, i don't have to hold it long before the green LED comes on and the phone vibrates... then the screen shuts off and i have to turn it back on again. it doesn't seem like it's staying on.
the $500 was from AT&T to have them fix it... so yes.
and thanks for the reply on the "VOID" - i thought it maybe had something to do with water damage or the cracked screen.

Have you tried turning it on with the wall charger plugged in? I thought I had seen my sons just shut down like that when his battery was pretty much dead and I was trying to turn it on.

Well, i was bored waiting for work this morning so i decided to put the SIM from my phone into the Tilt... I turned it on with my SIM in and it stayed on for longer... then I heard a little tick and kind of "whooosh" sound which I'm assuming is the start-up sound. Then nothing for a few seconds... then there is this "kerplunk" noise.. then the amber LED on the left of the ear piece starts flashing and then the phone starts vibrating and making a high pitch ring... the vibrating seems to be in a patter. Then I hear what sounds like it may be a shutdown noise and the phone is off again. However, the back light on the screen remained on the entire time. It might that with the SIM in it works, but the battery is dead so it turns right off? I have the wall charger here somewhere so I will have to try that after work. I will let you know the results.

most likely the sounds that your hearing are just an alarm clock going off. my guess is that the screen is the only thing that is really damaged. you can look online at ebay and get replacement screens with the tools necessary to replace the screen for under 100 bucks. i think that would be a good deal for you... keep us updated on the status

if possible if you are going to replace the screen from ebay you should take piectures. it would make a very nice guide for the noobs

yeah... i will definitely take pictures when i do it. i hope it's just the screen. i don't know why it won't stay on tho... i'm still trying to find the charger for it. i don't remember where i put it. i will keep you posted tho.

You can charge it with any USB mini type B lead plugged into a PC. You probably have one somewhere for a camera or other phone.
Don't be fooled by the shape of the socket on the bottom of the phone, it still fits.

mikechannon - do you know the name of any of these apps? i'm not able to find anything..
good news tho.. the phone now stays on and i am able to receive phone calls. i found a screen w/ tools for $70 shipped on e-bay. i want to try what you mentioned mike, hook it up to the pc. i just want to make sure everything seems okay before i buy a screen.

try my mobiler

okay... so i put the new LCD in and it works.. to an extent. it displays the at&t splash screen, then the 3G animation, then gets to the windows mobile 6.0 splash screen and it hangs there for a few seconds then shuts off. i thought maybe it needed a new battery because it wouldn't stay on before so i ran to the store and got one and it's charging now. i'm going to wait a few hours and try again...
when i try and turn the phone on when it's plugged into the charger it seems to hang on the at&t screen... this doesn't seem normal.
also, when it's not plugged in and goes through the screens, on the at&T screen it looks like it's showing RGB values or something in red text in the bottom right corner of the screen. is this normal?

Sorry, did not see your 3/22/08 post.
The RGD values in RED are normal (info about radio version etc) if you are starting from the off position or have just done a soft reset.
I'm not sure why it is hanging at the point it does. I am assuming you have done a hard reset? (you may have said - but I have not read back all the posts)
Mike

nope... no hard reset.
when i turn it on while it's plugged in the amber LED on the ear piece goes out for a minute, the AT&T screen comes up then a few seconds later the amber LED comes back on and it just stays there.
i was able to get it to get past the windows mobile 6.0 splash screen but it says 6 new notifications/alarms, then starts buzzing and ringing and turns off. one time it said battery was critically low or something. i want to assume that it is charging because the amber LED comes on.. but who knows. i would hate to have to give up at this point.

jbradt said:
nope... no hard reset.
when i turn it on while it's plugged in the amber LED on the ear piece goes out for a minute, the AT&T screen comes up then a few seconds later the amber LED comes back on and it just stays there.
i was able to get it to get past the windows mobile 6.0 splash screen but it says 6 new notifications/alarms, then starts buzzing and ringing and turns off. one time it said battery was critically low or something. i want to assume that it is charging because the amber LED comes on.. but who knows. i would hate to have to give up at this point.
Click to expand...
Click to collapse
Actually that all sounds pretty normal. Yes expect to get a whole bunch of notifications that have accumulated and never been cancelled. When they come up try to cancel them quickly - just choose dismiss. Don't be surprised if there are so many that it crashes the device and you have to re-start possibly several times until eventually you get past all those notifications!! This also happens when you restore a backup - I have seen my device go absolutely bananas with many many notifications and a crash is not unexpected.
If the battery is not charged give it a good hour of charging before trying again. One thing that puzzles me is that if you have the amber light that shows charging (good) then why does it give you a message saying battery low?? Normally you will never get that notification whilst on charge.
Mike

mike,
thanks for the replies. i was able to dismiss a few of them earlier and then the battery message came up and the phone turned off. it wasn't plugged in at the time. however, i left for the day and left it plugged in for probably 7 hours or more...turned completely off...and i came home and it got past the windows splash screen again and then said the main battery was critically low and turned off. can't get it to stay on now. i'm lost...
it seems like my only other option is to try a new charger.. but if the LED comes on it would seem as though it is working. i checked all of the contacts where the battery goes and like i said earlier, i bought a new battery this morning. i really don't want to take it apart again. while it was apart i did my best to clean the any dust or other build-up. i guess i could try and charge it on the computer.

my phone does the same thing I accidently dunked about an inch of it the top of the phone into a cup, thought it was ok after i let it dry off and it would boot up but I still can't get the phone to really charge, the orange light will go on but the battery never charges and I used to get the red critical battery warning. Ive tried a bunch of different chargers but still nothing just gets to the second splash screen in duttys rom and turns off now. Hopefully you can get your up though, just wish i could get 30 minutes of battery to get it back to stock rom and everything so i could send it back as the bottom never got wet and the water check under the battery is still white.

Mmmm. Well sounds like there is a hardware charging problem. Pity you don't have one of those chargers where you can dock a spare battery to charge it up. It would be a hassle though if that's the only way to charge the battery. There are ways to charge the battery by wiring the battery directly to a set of AA batteries or a charger, but that would not solve the problem in the long run.
There are companies that will replace the USB connection on the M/board but that would be to assume that is where the fault is - and I'm not convinced it is. The fact that the orange charge LED comes on suggests the USB connection may be ok and that it may be the battery connection block that has a broken connection. This is not easy to repair if at all. I have seen one reported case where that block with the gold connectors had broken connections and a repair company could not resolder all the connections.
One thing to try regarding the battery connector block. With the luck of the Gods it might just be that one or more pins is not making a good batter contact. Try cleaning the pins and battery contacts. (A bit of a forlorn hope though)
Mike

well, good news!
i left it plugged into the computer all night and turned it on this morning and it went through all of the alarms... i dismissed them all. it then stayed on!!! so i went to the system settings and looked at the battery life and it said it was at 100%. perhaps it was the charger... which would be odd. now when it's plugged into the PC the amber LED comes on for a second then switches to green. i'm going to try and use it for the day and make sure i can turn it on and off without any problems. the AT&T store is closed here today so i'll have to get a charger one day during the week. i will post back at the end of the day.

Reboots after I remove the batter

What the heck is going on?
I'm pretty sure this has nothing to do with the ROM, because it did this with the factory ROM, Manila 2d and now WM6.5.
I turned the phone off, unplugged it, removed the battery. I put the battery back in, replace the cover and press the power button. Nothing happens. I plug the phone back in to the wall charger and put power, it turns on....for about 3 seconds then reboots and it would seem that it will do this for as long as I let it go. If I unplug the phone while this is going on, it will die.
The last time this happened, it took it about a day and a half to sort itself out. It almost seems like its a battery issue.
Any thoughts or ideas?

UPDATE!
I took the sim card out of the phone for a few seconds and the phone seems to be working now.... But its been up and running for about 20 minute now with no sings of acting up.

zz_3.14_zz said:
UPDATE!
I took the sim card out of the phone for a few seconds and the phone seems to be working now.... But its been up and running for about 20 minute now with no sings of acting up.
Click to expand...
Click to collapse
mine started doing that today. went to use the camera and it reset then when it came back on it said battery was drained(this happened around 1pm and i always get a full day out of battery) and reset. have it on a charge right now but will not turn on. took out battery and put it back in with no luck. i will try to fully charge battery and take out sim. if all else fails i will try to hard reset. thanks

kaiser won't turn on
LuXx said:
mine started doing that today. went to use the camera and it reset then when it came back on it said battery was drained(this happened around 1pm and i always get a full day out of battery) and reset. have it on a charge right now but will not turn on. took out battery and put it back in with no luck. i will try to fully charge battery and take out sim. if all else fails i will try to hard reset. thanks
Click to expand...
Click to collapse
tried to charge the pda all night the light stayed orange and never turned green indicating full charge. tried hard reset and when it goes in to prepare rom it shuts off like dead battery. when i plug in the pda to charge battery and then turn on the phone it freezes on splash screen. if i turn on phone then plug in to charge it acts like i havn't pluged in charger. is it the pda or battery?

I am not 100% sure on this, but to me it sounds like the battery.. and that is a MUICH cheaper option to test out... unfortunatly you ahveto wait for shippng typicalyl unless you have a friend who has the same phone.. I got 2 backups and a stand alone charger now... The other option could be your USB port... I have not heard this specific problem with them.... but I am a PC tech and have seen very simmilar problems with laptops... Usually the first think to for is the power port... Just like out phone, if the device is not on a flat surface and such when it is plugging it, it tweaks the port and it eventualyl breaks... on laptops it is not uncommon that when plugged in, the LEF wil light up saying it is getting power to charge, but it enver charges the battery, and even sometimes can;t power up the full system.. .It sort of sounds like this is what you phone is doing as well.. .If that is the problem the stand alone charger would work (my son broke off his usb all together and now syncs via bluetooth and jsut changes batteries.. he has 3 himself as well) If you search online, you can usualyl find a kti with a battery or 2 and a charger/dockign station for under $20US total. Good luck!
LuXx said:
tried to charge the pda all night the light stayed orange and never turned green indicating full charge. tried hard reset and when it goes in to prepare rom it shuts off like dead battery. when i plug in the pda to charge battery and then turn on the phone it freezes on splash screen. if i turn on phone then plug in to charge it acts like i havn't pluged in charger. is it the pda or battery?
Click to expand...
Click to collapse

Teej53214 said:
I am not 100% sure on this, but to me it sounds like the battery.. and that is a MUICH cheaper option to test out... unfortunatly you ahveto wait for shippng typicalyl unless you have a friend who has the same phone.. I got 2 backups and a stand alone charger now... The other option could be your USB port... I have not heard this specific problem with them.... but I am a PC tech and have seen very simmilar problems with laptops... Usually the first think to for is the power port... Just like out phone, if the device is not on a flat surface and such when it is plugging it, it tweaks the port and it eventualyl breaks... on laptops it is not uncommon that when plugged in, the LEF wil light up saying it is getting power to charge, but it enver charges the battery, and even sometimes can;t power up the full system.. .It sort of sounds like this is what you phone is doing as well.. .If that is the problem the stand alone charger would work (my son broke off his usb all together and now syncs via bluetooth and jsut changes batteries.. he has 3 himself as well) If you search online, you can usualyl find a kti with a battery or 2 and a charger/dockign station for under $20US total. Good luck!
Click to expand...
Click to collapse
Thank you for your reply! I have just ordered a new battery and will post my findings when it comes. Thanks again.

oh no
LuXx said:
Thank you for your reply! I have just ordered a new battery and will post my findings when it comes. Thanks again.
Click to expand...
Click to collapse
no luck with the new battery. still doing the same thing. please someone help me! Thanks

LuXx said:
no luck with the new battery. still doing the same thing. please someone help me! Thanks
Click to expand...
Click to collapse
tried bootloader and installed official att rom and never shut off. when it was finished with install same issues appeared. help

For anyone facing this issue I would not recommend wasting money on a new battery as this issue has been around with few users since the Kaiser "Tilt" first came out and I've never seen ANY reports that a new battery fixes this. People have bought new batteries, fully charged their battery from a docking station, tried their friends fully charged battery all with the same result. I had this power down issue a Looong time ago my first week in with the Kaiser and managed a fix and am using the same battery now. Although it seems the battery is not being fully charged it's important to leave it charging until you'd assume it's fully charged and get into bootloader mode and flash an official htc Tytn 2 rom. It should flash completely, and the fact that it does not die immediately as on normal boot indicates it is not the battery but the rom. It did take me the whole afternoon of Flashing, recharging and repeating before it finally kicked in. Also, from reading older posts, it seems most if not all users like myself fixed this by flashing the older official htc wm 6.0; worth a shot at least.

kaalgoosy said:
Also, from reading older posts, it seems most if not all users like myself fixed this by flashing the older official htc wm 6.0; worth a shot at least.
Click to expand...
Click to collapse
Yup, that is what I had to today (I hard reset, actually), with barely enough battery life to do this.
Then the bloody unit came up and was charging - amazing, really!
(Was using the official HTC 6.1 upgraded WindowsMobile OS)

here is my 2 cents....
I owned five Tilts, replaced four of them with warranty issues ... so i have faced this dilemma on at least two of them.
First see if the USB tongue is loose. To do this try to gently tap it with the stylus. If the tongue inside the USB port is loose then you will be facing rebooting and other issues and troubles in the future. The USB tongue gets used and jerked every time you connect your device to your PC or wired headset. If you are still under warranty and the USB connector tongue is loose I recommend returning the phone ( if you still can) and getting a replacement. There is no easy fix for a loose USB connection tongue as i have taken one apart and it is very difficult to repair or replace and very easy to mess it up further.
So, my advice to all Kaiser owners... be careful when plugging and unplugging your phones through the USB. Do it gently as the connectors are very fragile.
For those that have the above issues, I recommend using a separate battery charger tray, avoid plugging the USB as much as you can, and if you must, then administer extra care. The rebooting will stop if you plug the USB cable to the device and move it up and down a hair then holding steady. And most likely you will not get a full charge or even a partial charge. The biggest culprit to this problem is car chargers, and second, is inserting the stylus by mistake (when it is dark and hard to see) in the USB port instead of the Reset hole by accident.

[Q] Galaxy Note gone crazy!

I started having a big issue with my Galaxy Note recently. The problem is that randomly it would think that it's charging, or connected in car dock mode, or connected to a PC, so the screed would light up with the sound of being connected, respective menu popping up, media scanning running and all the crap. Once, it even entered the Safe Mode - a "safe mode" writing appeared in the bottom left corner, and it would stay in all the applications and screens. The phone is quite new, one week only, and first three days it was fine. The MicroUSB jack is undamaged and clean. Now I have troubles charging and connecting the phone to PC - I succeed in doing so only from 6-7th attempt.
No idea whether it is a software or hardware issue, because in download mode it connects to Odin seamlessly, and after connecting it to Odin and rebooting it, for an hour it stays calm and connects and charges properly.
The issue is very annoying and drains battery really fast. Any ideas, gentlemen, what this could be? Or should I take it to the service centre?

Are you using a stock rom? if not you may want to try a full stock unrooted rom and see if the issues continue. If they do then take it back as it shouldn't be doing anything like that.
Did it get any water damage by any chance as electrical devices tend to get possessed when a little water gets in there somehow.

Thanks for the quick answer, martcerv.
I am using the stock KKA rom. I used to have J4, then I flasher Rocket V6 rom, issues started, I flashed to the stock one, issues didn't disappear. And no, no water, no drops, and as I said, it connects nicely to Odin and does connect and charge properly for an hour after that.

I had a very similar problem with my Note. It was like it was possessed by car mode.
My solution was to take out the battery for a few hours. I had tried everything and that seemed to correct the issues.
So maybe take out the battery and leave the phone with the back off in a dry place for a few hours or overnight.

Hm.. Will try that

Didn't help, I just don't know what could be the reason... Now, when I connect it to the PC in debugging mode, it mounts the card and USB storage by itself. And then disconnects. Connects again... Seems that the damn thing got possessed. Will take it to the service centre.

I am having the same problem. There seems to be an issue with the USB port.

Exactly the same problem just started happening today, car mode, clock and weird USB stuff seem to be the main symptoms. Running stock ROM, not rooted, if it doesn't sort itself out by tomorrow will be getting in touch with seller for a replacement.

i have the same problem and it seems like the usb port issue. I will try to send in my note for repair and see if they will fix it. If they refuse, then i will wait for the usb port to be available on the net so I can buy it and install it myself. Its a small independent board with a flexible ribbon cable. can be changed in 10 minutes

John Charles said:
Exactly the same problem just started happening today, car mode, clock and weird USB stuff seem to be the main symptoms. Running stock ROM, not rooted, if it doesn't sort itself out by tomorrow will be getting in touch with seller for a replacement.
Click to expand...
Click to collapse
Okay so tried sticking the usb end in a bowl of dried rice overnight and it seems to have done the trick so I'm guessing some moisture got in the usb somehow, but really can't think how. Delicate little flowers these notes aren't they

Note slipped out of my pocket and fell in a snowy/slushy parking lot after a big snowfall. For a few days after that it would randomly go into charging mode.
Perhaps the USB ports are prone to malfunctioning and the drop in the snow aggravated the existing problem.
Happening less and less though. Hope it isn't permanently damaged.

Same issue on my new galaxy note
After three days, my note has started to do the same.
It suddenly starts to charge with no wire connected, or activates deactivates the car dock mode by itself.
It can work fine for a couple of hours but then becomes crazy with no reason. I'm almost sure that any water has touched the phone.
After entering "crazy mode", even when it has get calm again the phone doesn't recognize the charger wire. Only taking out the battery lets the phone become "normal".
I'm almost sure is a hardware problem.
To be continued ...

I have the same problem as well after playing in the snow but I fixed mine...
First thing I did was lightly blow-dry the USB side of my note on high-heat for about 5 minutes. I didn't blow-dry the battery or battery area of the phone but that doesn't sound like a bad idea either.
The next thing I did might only serve temporarily as the device needs to dry more: go to settings/applications/development and make sure debugging mode is checked. If its already checked, uncheck it and wait a sec... then check it back on.
I've not seen the thing act up since so I'm crossing my fingers for me and the rest of you. Good luck
P.S. Worse comes to worse, you could always get a new USB port off of EBAY and install it yourself which is what I'll do if I see the charger symbol act up again :-|

Fixed !
I fixed my phone too !!!.
Initially I did the same blow the usb side hopping to put out any particule that could be inside the usb hole.
Whit this the phone started to work normally, but one day later it became grazy again, but then I realized that it was only after using one usb charger that I have at the office.
If I don't use that charger the phone works fine !.
Four days working properly !.

I was on KL7 when my phone started going crazy around the third or fourth day. And the phone wouldn't charge when the power was still on, whether it's connected to the pc or wall charger. Cleaned the port and cable ends with rubbing alcohol and that seemed to solve the issue. Wiped cache partition and dalvik cache a few times too. Oh, and I got so spooked I changed back to my previous stock rom. LOL.
Hope this info will help your phones.

poor USB
Well I have had this problem for 1 month now.What finally fixed it was to clean the USB port with brush and nail varnish remover.Some people use a tooth brush take out battery dip brush in nail varnish remover and clean port and leave to dry for at least 20 minutes.I used a brush from electric razor give out a good clean and not to gentle either needs a good clean to remove oxidization.

jazz452 said:
Well I have had this problem for 1 month now.What finally fixed it was to clean the USB port with brush and nail varnish remover.Some people use a tooth brush take out battery dip brush in nail varnish remover and clean port and leave to dry for at least 20 minutes.I used a brush from electric razor give out a good clean and not to gentle either needs a good clean to remove oxidization.
Click to expand...
Click to collapse
I'm not a freak but nail varnish and electric razor
Come on

it seems like a common problem as many people are beginning to have this usb port problem after a couple of month (or less) use of the note. Cleaning the usb port will solve the problem temporarily but the real solution would be to change the usb port circuit board from the inside of the phone. The usb port circuit is not available on ebay yet but some chinese supplier is selling it out of china.

Man, this is a scary post...

ericshmerick said:
Man, this is a scary post...
Click to expand...
Click to collapse
Yea just reading it is giving me the chills

[Q] Hardbricked handset whilst charging overnight

I've recently been experiencing some charging issues with the handset taking forever to charge, the latest charge was taking well over 15 minutes increase 1%. I tried various chargers, including a brand new original one (the one in the box).
Well, last night I put the phone on charge with the handset turned off around 2am, woke up around midday today and the handset was showing the green LED, so it was almost, or fully, charged. Went downstairs to have a cup of coffee and came back ten minutes later to find the LED off. Tried turning the phone on and nothing happened. Tried the reset combination and the red button under the SIM flap, nothing, tried connecting to SEUS, nothing. Tried connecting to Flashtool, nothing. I left the phone on charge for another hour and tried the same things again, nothing.
No lights, no vibrations, no screen activity. The phone isn't even getting warm like it normally does on charge (confirmed that with another charger)
My girlfriend said that whilst I was downstairs she did take it off charge and put it back on charge straight away when it wouldn't wake up BUT she wasn't sure if she put the charger back on the right way (the magnetic one) however the pins don't actually touch if the plug is the wrong way round as the pin towards the bottom of the phone is offset slightly so I don't believe it has shorted.
So great, my almost new Z1 is now a paperweight. Sony won't touch the handset as the back glass has a small crack in so they just spout off about water damage. The phone has never been near water, let alone in it.
C6903 on 757 firmware, bootloader relocked and non rooted. No nasty apps installed and basically running stock,
Anyone have any ideas? I'm resurrecting my old BB for the time being.

I bet its been shorted
Leave it on mains charger for 24 hours

gregbradley said:
I bet its been shorted
Leave it on mains charger for 24 hours
Click to expand...
Click to collapse
That's what I'm thinking. The design of the dosk pins should prevent that, but apparently it doesn't!

As probably there is stripes to check if water was inside I will exclude that. Also the magnetic connector have his way to plug so is close to impossible to revert it, hardly if you try maybe it will, but I did many time and nothing happened. At last I think you girlfriend mess up with you phone and now she now don't remember because she knows you will be furious...LOL...
BTW, I will press Sony to take look at it. They don't have to replace the cracked glass, they have to check where is the problem.

eclyptos said:
As probably there is stripes to check if water was inside I will exclude that. Also the magnetic connector have his way to plug so is close to impossible to revert it, hardly if you try maybe it will, but I did many time and nothing happened. At last I think you girlfriend mess up with you phone and now she now don't remember because she knows you will be furious...LOL...
BTW, I will press Sony to take look at it. They don't have to replace the cracked glass, they have to check where is the problem.
Click to expand...
Click to collapse
As you say, none of the water indicators (if I'm actually looking in the right place) are a different colour to normal. The dock pin is offset to one side slightly, it can be seen if you look closely so you are right, it really shouldn't have damaged the handset.
She isn't even sure if she did plug it back in! She was half asleep so I don't know lol
Sony will be getting some nasty words in a letter if they fail to do anything. I don't care about the glass, it doesn't bother me, as long as the phone works,

top part of phone get hot after screen replacement

Hello
My screen cracked so I ordered a new on ebay. However after I have put the phone back in its shell the top part gets pretty hot. I opened it and started it without the aluminum shell to test and there were no heat? Anyone know what it might be?
Thanks In advance!

That isn't likely to be the screen. My phone gets warm too. About 4 days ago out of nowhere I noticed the upper part of the screen feeling warm, it turns out my phone had stopped sleeping properly and Google services had resumed chomping on my battery when the screen was off.

Tho when i don't keep it in the aluminium case it's not warm at all, turned on and I have logged on my simcard/wifi. I have left it on outside of the case for 1 hour and it don't get warm at all. However in the case it gets super hot as soon as it boots and then after 15-25m it turns off probably because it's too hot

Happened the same last night with me.
Put a download and slept, and in the morning it was all drained of battery and it showed that it shut down after minutes after I slept with 90%battery.
It was weird. Had to keep pressing power button for 40 sec approx for the phone to turn on.
It's working fine now though

did anyone of you even read my post? I said after a screenreplacement. It didn't just happened randomly. however i fixed it. I removed the camera and the earspeaker and reinstalled them used some alcohol on the contact points on the case and the earspeaker and it seemed to fix it if anyone has this problem later down the road

Hi jullleee, I have the same problem as u after I replaced the screen. The phone getting too hot on the top (one plus 3). On charge it becomes more hot and faster on very high temperature than without charging. Also the battery dont charge . Why did u reconnect the ear speaker and the camera ? Thank you in advance

DestinyisGone said:
Hi jullleee, I have the same problem as u after I replaced the screen. The phone getting too hot on the top (one plus 3). On charge it becomes more hot and faster on very high temperature than without charging. Also the battery dont charge . Why did u reconnect the ear speaker and the camera ? Thank you in advance
Click to expand...
Click to collapse
For anyone coming across this thread I just had the same problem when replacing my Oneplus 3 screen. It seemed to work, and I plugged it in, but it said "battery too low charge for a while", then I got the 0% and seemed to charge and then restart, and then be back at 0% and be stuck in this boot / charging loop. My battery had died hard when my screen died so I thought maybe it just needed to charge for a while, but the top half of the phone got very hot.
So I took it apart again and it turns out the issue for me was with the top ribbon cables that cross the battery. Where they connect to the main board was very tight and it was difficult to get both of them in place properly. Usually they kind of overlapped and one stuck up slightly. It was fixing their placement before bolting down their cover that fixed this issue for me.
Edit: Never mind. Still searching for my issue. Taking the back case off will let it work normally but whenever i snap it on it goes back into this charging loop, I still suspect it's an issue with these two cables and the case is putting pressure in the wrong spot or something but I'm not really sure yet.

I had the same problem, the issue was the fact that i plugged the ribbon cable the other way around.