Hi,
I'm looking for galaxy tab stock ROM from Rogers (UXJJ6) please
I want to try to revert to original FW because my tab is stuck at samsung galaxy screen for more than 2 weeks now. All the ROMs i flashed have failed ( for example ROTO JMI, JME or jmk,jj4, jk5 etc) Odin or Heimdall say "pass" but the tab always reboots to the samsung logo and stays there.
Thanks in advance for any help you could provide
Sent from my GT-I9000 using XDA App
Search its in the forum i posted it.
Sent from my GT-P1000
crisvillani said:
Search its in the forum i posted it.
Sent from my GT-P1000
Click to expand...
Click to collapse
Hi Crisvillani,
2 weeks ago I tried the Rogers FW that you posted on march 12. I flashed with heimdall all what was inside by putting each file in their correspondant box. The status bar goes 100% but the tab doesn't reboot.
There is a Pit file that i was not able to use because the box is always greyed out and when I check the repartition, the start button becomes greyed out too.
I was wondering if the ROM is complete or should I flash specific files in some specific order.
Please advice as my tab is still stuck at samsung logo screen.
Thanks in advance
Hey i'm not exactly sure what you have to flash but before you got stuck in a bootloop what firmware were you one and were you converted to ext4?
If so try repartitioning with the .pit file in the folder , then with heimendal flash the factoryfs.rfs and cache.rfs and dont wrry about the rest.
Im pretty sure that should work!
Dude this is the development forum not general discussion or questions forum. This sections is for posting of dev projects, tutorials or reference only.
Use the search function to find what you are looking for.
Crisvillani,
Thanks for the hint. I'll try that out again and see if it works.
TheATHEiST,
Sorry for posting in the wrong section of the forum. I guess I was so desesperate I didn't pay attention.
A+
Sent from my GT-I9000 using XDA App
tupo05 said:
Hi,
I'm looking for galaxy tab stock ROM from Rogers (UXJJ6) please
I want to try to revert to original FW because my tab is stuck at samsung galaxy screen for more than 2 weeks now. All the ROMs i flashed have failed ( for example ROTO JMI, JME or jmk,jj4, jk5 etc) Odin or Heimdall say "pass" but the tab always reboots to the samsung logo and stays there.
Thanks in advance for any help you could provide
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
My guess would be that the ROM you were most recently using has converted your partitions from RFS to another format. Stock ROMs will not work with these other formats.
As such you need to repartition your device. At the moment the start button is greyed out when you select repartition because you have not provided all the necessary files. Once you've put a file in every slot (except recovery) then you will be able to flash. If you're unsure and want to put a file in recovery just select the same file you chose as the kernel/zImage.
Hi
I have a non branded GT-P1000 Tab. Trying to follow instructions at http://www.androidauthority.com/galaxy-tab-gt-p1000-android-4-0-4-ics-aokp-rom-97483/ to install AKOP.40 ROM
Need Clockworkmod installed.
Installed Rom Manager then attempted to install Clockworkmod - It asks me to choose my phone type. Closest options are: Galaxy Tab - ATT, Samsung Galaxy Tab - T-Mobile, Samsung galaxy tab - VZW.
What do I install, or is there another version of Clockworkmod for non Branded TAB somewhere?
Thanks ColinK
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi
Thanks for your prompt reply. The instructions for flashing overcome seems to have multiple steps and "IF's", with multiple opportunities to go wrong.
The android authority guide seems straightforward, and I have gone through some of it - except the guide makes no mention of how to get CWM.
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
If not, were exactly does the install part start and do I also have to install Odin?
Sorry for so many questions / uncertainty.
ColinK
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
colink said:
Hi
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
ColinK
Click to expand...
Click to collapse
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar filehttp://forum.xda-developers.com/editpost.php?do=editpost&p=29235809
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Actually you can flash a CWM.zip update without installing a kernel after you root your device.
But again, installing kernel with CWM included just like Priyana said would be a lot easier and simpler.
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Hi ColinK,
Unfortunately there is no straight way to install AOKP.
I am afraid you have to follow the guide to the letter, sort of.
This is why.
Some froyo from for our tab has locked bootloader.
So if you are on froyo there is a small chance you had a locked one.
You need to root your tab then run an app to check and to patch.
(I forgot by now whether you need root to check... to patch definitely yes)
Now, that is why Overcome guide said if froyo you need to root.
It is not strickly necessary.
Now, let's assume you don't have locked bootloader.
You only need to use Odin and flash GB stock safe v5 (which is actually Gingerbread Samsung version JQ1 Italian rom)
So, you need Odin.
Unpack the gb stock safe and you find Odin and USB driver.
Install USB driver first, then plug in your tab and your PC will detect the new device.
Unplug your device.
Install Odin.
Launch Odin, put your device to download mode and plug your device in to PC.
I am not a big user of Odin. I use heimdall in Linux which is simple and just work, so my memory is sketchy.
Odin will detect your device. There will be messages on screen.
Line up the files according to the guide and flash.
If no error your tab rebooted and you have GB ROM.
that of course isn't the end because you need cwm.
So continue with the guide.
It asks you to use Odin to flash overcome kernel tar.
Do it and you will end up having cwm recovery.
That is the end of guide.
You don't need to flash overcome rom.
Just follow my other thread reply to get AOKP.
Sent from my GT-P1000 using xda app-developers app
Addition info: The easiest way to check if you are rooted or not:
Download and install 'root check' or 'got root?' from google play store.
If the rooting failed, you can try the doomslords rooting script. It was my favorite root script up to GB2.3.3
Once you succesfully rooted, continue download the bootloader patch for froyo.
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
priyana said:
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
Click to expand...
Click to collapse
I can feel you. I can't even 100% remember if gb-stock-safe is pre-rooted or overvcome kernel gives root access for it.
colink said:
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Click to expand...
Click to collapse
Well Colink, I must say.....priyana's guides are one of the best ones for installing roms ...it's just perfect...I flashed my tab with aokp without even getting a single error....read the overcome guide perfectly ...I know it's a bit confusing but read it ten times and u will be just fine
Sent from my GT-P1000 using xda app-developers app
Overcome links are all down.
Overcome links are all down. Any alternatives? (Rooted gt-p1000 2.3.3 Gingerbread DXJPI
Come on,
a little search in overcome thread and should spot it.
Here is the spoiler
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
I too am trying to get the Tab up to ICS via the overcome procedure, links are down on overcome and not all the links on the tabfirmware are working, specifically the Overcome_Kernel_v4.0.0.zip doesn't work, with a nice <This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.> message.
There's also the link to the full overcome site as a screen capture or something in this post http://forum.xda-developers.com/showthread.php?p=20974872, but it's now giving a 404, so my confidence level for doing this is now low ;-(
Any help appreciated. pls, pls, pretty pls.
Don't want a bricked Tab would make me sad
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
I recommend first upgrading to 2.3.3, then flashing chainfire's modded cwm via odin:
http://www.4shared.com/zip/vsN8JA6x/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
and then flashing overcome via cwm:
http://www.ravishare.com/1fragzl971e6/Overcome_7_Series_v4.1.0_NoWipe.zip.html
then you can flash any aokp or cyanogenmod mtd build.
Upgraded to ICS and thanks
Ok so thanks to all who helped out with links to roms and guides.
I now have a lovely Galaxy Tab with ICS from AOKP.
And for anyone who would like to try but hasn't yet it really is surprisingly easy, just take your time and make sure to do it right, you won't regret the upgrade to ICS
I stood on the shoulders of giants to do this :good:.
So you use the method I posted or what Gogol posted?
Sent from my GT-P1000 using xda app-developers app
ha ha
guyz i need help in installing cwm in my rooted galaxy tab p1000 running 2.2 froyo
is there a way that i could root galaxy tab gt-p1000 using only adb, i need the files , like SU,the unlock procedure of the bootloader, recovery for GTAB , and instructions if there is any.. thank you and good day XDA! i cant use superone click my pc identifies it as a malicious file...
Disable the antivirus then.
Anyway, follow my signature for overcome method.
Sent from my GT-P1000 using xda app-developers app
Yes, you can. Google for the such files, or flash overcome kernel as priyana has mentioned. You can also root it by flashing cf root files via Odin. You will find it in a pos by me named stock to ics
gogol1996 said:
Yes, you can. Google for the such files, or flash overcome kernel as priyana has mentioned. You can also root it by flashing cf root files via Odin. You will find it in a pos by me named stock to ics
Click to expand...
Click to collapse
hi problem solved thanks guys .. now my GTab p1000 is rooted ... i didnt used superoneclick, i used odin instead... byt the way ive been reading though some of the roms, whats with this overcome procedure on rooting different with other kinds of rooting? does that mean i cant use other roms specifically the ones that need this overcome method?...
Mario Christian Oquias said:
hi problem solved thanks guys .. now my GTab p1000 is rooted ... i didnt used superoneclick, i used odin instead... byt the way ive been reading though some of the roms, whats with this overcome procedure on rooting different with other kinds of rooting? does that mean i cant use other roms specifically the ones that need this overcome method?...
Click to expand...
Click to collapse
No difference. Just kernel (the brain of your device) will be different
SOLVED
gogol1996 said:
No difference. Just kernel (the brain of your device) will be different
Click to expand...
Click to collapse
aaahhh... i see , thank you for the informations... next thing to do now is choosing the best rom with the best optimization and smoothest and most complete one...maybe ill just make a new thread... this one is closed ! PROBLEM SOLVED!
Hi guys,
Sorry if this has already been solved, I've been reading and attempting fixes for a day now with no success.
My i9000 is on froyo. I am running Ubuntu 12.10 so obviously my options to use odin are limited.
My goal is to root it and upgrade to Jelly Bean.
After much reading (not enough?) I decided to give heimdall a shot using this TUT
and info gathered from here amongst other places.
I managed to finally get my device to show in Heimdall. I then flashed it. I think using files found in either of those places.
Now I have a semi-bricked Galaxy S which I can get it into Download mode.
This morning I grabbed my GF's Windows Netbook and installed Kies and Odin hoping to follow a more orthodox route to getting this phone to a functional state.
Kies hangs at connecting. Odin recognized the phone though it FAILED anytime I tried flashing it with stock firmware.
I can provide error messages if you need them.
At present I must restore firmware back to stock -> then root stock firmware -> then upgrade to Jelly Bean is that correct?
If it is can anyone point me in the right direction to restoring the stock firmware?
The best thing for you to do would be to search this forum for the update and root tutorial for the 2.3.6 value pack then flash 4.2.2 there should be tutorials for heimdal and Odin
Edit: here's the tutorial I used
http://forum.xda-developers.com/showthread.php?t=1809098
Sent from my GT-I9000 using xda premium
kevtrysmoddin said:
The best thing for you to do would be to search this forum for the update and root tutorial for the 2.3.6 value pack then flash 4.2.2 there should be tutorials for heimdal and Odin
Edit: here's the tutorial I used
http://forum.xda-developers.com/showthread.php?t=1809098
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
you are a legend, thank you!
I accidently updated an unrooted Samsung stock ROM that shipped with the phone with cyanogen_mod
_7_tass in my attempt to root my Samsung Galaxy mini s5570 using update.zip method.
I had intended to used the "update.zip" method to root the device. But the ROM MOD instead, sadly had also been "update.zip".There was a mix up of the two files.Theres unfortunately no Clockworkmod Recovery installed. (I was quite aware of this possibility if things were to go wrong.).
My Device runs on Froyo and now is in a bootloop.
I just only want to find out if there is the slimest chance of having my device back in shape again.
Thanks a bunch in advance !
I will be happy to hear theres some hope.
huffy808 said:
I accidently updated an unrooted Samsung stock ROM that shipped with the phone with cyanogen_mod
_7_tass in my attempt to root my Samsung Galaxy mini s5570 using update.zip method.
I had intended to used the "update.zip" method to root the device. But the ROM MOD instead, sadly had also been "update.zip".There was a mix up of the two files. Theres unfortunately no Clockworkmod Recovery installed. (I was quite aware of this possibility if things were to go wrong.).
My Device runs on Froyo and now is in a bootloop.
I just only want to find out if there is the slimest chance of having my device back in shape again.
Thanks a bunch in advance !
I will be happy to hear theres some hope.
Click to expand...
Click to collapse
You must reinstall again stock rom (programs needed: Odin,tass.ops and drivers for galaxy mini s5570). On xda you'll find step by step reverting back to stock rom your galaxy mini. Btw read carefully every step to understand those things and after you can practice. Check general section for Odin and installing stock rom.
Press thanks if helped you
am downloading .. s5570 galaxy mini firmware--- is that the same thing as stock ROM?
kyooby said:
You must reinstall again stock rom (programs needed: Odin,tass.ops and drivers for galaxy mini s5570). On xda you'll find step by step reverting back to stock rom your galaxy mini. Btw read carefully every step to understand those things and after you can practice. Check general section for Odin and installing stock rom.
Press thanks if helped you
Click to expand...
Click to collapse
After a whole day of no-work and goofing around the web yesterday i figured out somthing similar but just wasnt sure ...felt i needed to search some more. then your quote dropped in my inbox. Its made a lot of my confusion clear. I have tass, odin and ops. all the programs need already. At first i could access the stock rovery mode, but using odin again to try and get Clockworkmod made matters worse. I have with a bootloop and no where close to the recover mod any more just downloading mode. So I've kept reading and reading on to find out something useful. I guess that may be the sure way getting stock rom installed back.
Now i am just downloading .. s5570 galaxy mini firmware--- is that the same thing as stock ROM?
That's it man...Official firmware is called the stock rom...
Sent from my GT-S5570 using XDA Free mobile app
Im curious how did it go
Sent from my SM-N9005 using XDA Free mobile app