Database Develop

[B]HELP!! stuck on the color screen![/B]

im stuck on the red green blue and white screen on my tmobile mda and it wont do nothing else after i turn it off and on..anyone can help me with that?

damdismoo said:
im stuck on the red green blue and white screen on my tmobile mda and it wont do nothing else after i turn it off and on..anyone can help me with that?
Click to expand...
Click to collapse
You can try a hard reset, holding in the com manager and voice recorder buttons and hit the reset. (Read the WIKI).
You will lose your data and settings, but you may recover the phone.
You could also help by telling us how you got into that state.

read this thread G3.2 http://forum.xda-developers.com/showthread.php?t=298613

Please don't post the same question in 2 different threads. Use the search button, read the stickies, this is one of the most common questions here at xda...do some research, you'll learn so much about your device, it will be worth it.

Mine is also stuck, and I created a new thread about it. I have tried different recovery theories with no luck though.
http://forum.xda-developers.com/showthread.php?t=340965 is the post. When searching I only found 1 thread appropriate, however I think I was searching only the WM6 thread, and that was my problem. I even originally created the thread in the WM6 category.
Jason

Help! My HTC Diamond was dead !!!

My HTC Diamond was dead today!!!
It was working properly this morning but just stop working after that.
It can't turn on at all, can't charge ( as i can't see the light was flashing when it was charging), i bought a new battery but that's doesn't help.
does anyone know how to fix it?
many thanks.

can anyone help?

Hi,if you phone can't turn on at all,you may try to make a Factory Reset

juyon said:
Hi,if you phone can't turn on at all,you may try to make a Factory Reset
Click to expand...
Click to collapse
Did it, but nothing happened at all!

good
take him to hell
buy another one
good luck man

disassemble and check every connector is the only solution in this situation

not enough information..

search google
How to restore "Dead" Genie-Universal after OS UPDATE with Remote-Tools

coldxtr said:
search google
How to restore "Dead" Genie-Universal after OS UPDATE with Remote-Tools
Click to expand...
Click to collapse
that seems for different phone?

Did you fix it yet? If not, download the service manual and disassemble it, check everything, reassemble...see if it helps.

very sad about this dead unit.

[Q] Please help me

ok call me a noob call me anything but please do help me out.. Was running ICS XXLPY on my samsung Note N7000 ofcourse with problems such as frequent restarts, over heating and etc etc.. Till i found http://forum.xda-developers.com/showthread.php?t=1354888 (no i do not blame the author or the developer of the thread/process.. but only myself) namely method to remove the yellow traingle with the 'jig' .. And that is the part i missed completly.. put into download mode and did the complete the process (atleast i thought i had completed) with pc odin. Till i read the 7th line to connect the jig.. and thats where i just did not have do not have.. anyways i removed the battery waited a few seconds and tried restrting .. but got a black screen and could only hear the sound ofcouse touch was responsive as well but black screen.. Took out the battery again and tried to put into whatever mode it would go while toggling/playing with the volume up/down power and menu buttons 3-4 times but nothing.. It still does get on though with a black screen.. can accept calls talk.. but all on a black screen.. touch is responsive .. my bluetooth headset is.. but the screen is black.. Any help shall be much appreciated

Were you able to find a solution to this problem?
I am asking because even i have the irritating yellow triangle, but i know that the method to remove it is risky so i am not doing it as of now. So i am curious if you were able to manage to salvage your phone?
Thanks

For the record, you can use TriangleAway by Chainfire to remove the yellow triangle. I mean, make sure you're kernel/rom support it, but if it is stock ones than it should. I'm not sure about the new CM9/CM10 ones.

First of all, let me ask you a question, do you really have a usb jig?
If you don't have one, then why did you gone to that route of that link (how to remove yellow triangle.. with a JIG) if you don't have one in the first place? kinda stupid following that link when you don't' even have a usb jig at all.
Also, why on earth would you resolve your frequent restarts and heating problems by that link? (How to remove yellow triangle thru a USB JIG)? how does that really resolve your issue? I'm quite amazed your phone still has things working (BT , touch is responsive you say?), MAN, you totally GOOF UP! Your solution is entirely NOT the answer to your initial issues and you made it more aggravating to the fact that you followed a wrong solution!.
That's not even the answer to your problem!! Geez! Dumb as it can be but surely you need to search first the right solution to your problem before you apply one right?
My advice to you is, buy a USB JIG... try to see if you can bootup your screen using it. And by the way.. POST Your questions first before you do something okay??? ask first then do it.. not the other way around!!
tsk!

rhl.thakur said:
Were you able to find a solution to this problem?
I am asking because even i have the irritating yellow triangle, but i know that the method to remove it is risky so i am not doing it as of now. So i am curious if you were able to manage to salvage your phone?
Thanks
Click to expand...
Click to collapse
u just need to use the triangle away by chain fire. I have tried it and it worked..
Sent from my GT-N7000 using xda premium

[Q] BRIQQ'd Black Screen

Can anyone help unbrick this?
http://forum.xda-developers.com/showpost.php?p=58182876&postcount=2056
Black screen, (comes on but screen black) loops in black screen, no Boot to Recovery, No fastboot etc.... I've searched through the threads, it's called a "qualcom 9006" error. Windows sees it as a "qhsusb_bulk"
Dont see how I could hurt it any worse using Tung Lee tool (I'd ask him to fix it but don't have access to PP)
Anyone fixed one of these? Please?
Thanks in Advance
VW

Now it wont charge...
virginwidow said:
Anyone fixed one of these? Please?
Thanks in Advance
VW
Click to expand...
Click to collapse
So now it seems to have lost charge. Or WONT charge.
Phone is out of warrantee... Neither computer or phone now recognizes if I plug in USB.
There should be some way to "reset" something within it, I know the battery "isn't removable" but I've seen some tutorials in here for _inside_ resets.... Not sure which is the right one. Somebody could link me please?
THANKS
VW:crying:

How to write an interopp unlocked app or replace some services?

Hey All,
So I followed the exelent guides around to fully interop unlock my 830. I got the idea to try and make a replacement shutdown experience (when you hold the powerbutton and the shade slides down). I'm ok if someone else can hop on it, but was wondering how does one get started figuring out what components to overwrite and how to find them and test them.
If this is discussed in a FAQ I missed, I apologize and will take directions there.
Appreciate any info!