Database Develop

Help!!! Tilt wont power on

My Tilt began having issues just the other day. The screen would periodically fade out and go white. I would soft reset and the screen would remain white. I was able to get into bootloader. Now i get no display and a green light on the ear piece is all i have.
Anyone have any clue if it's possible to fix this. I just got the phone on Friday and did Hard Spl by Sunday i was experiencing issues.
Any help or ideas would be great.

have you tried pulling the battery out for 10 minutes and letting the phone totally discharge?

i am trying that right now

still the same response. the device will not boot up

my first kaiser was dmaaged by myself. at night i wanted to reset the device. but the hole ist not like the hermes left of the usb jack its right of it so i didnt saw and didnt felt it and pushed my stick into the usb jack. at the hermes the usb jack was a board but in the kaiser the connectors are metal sticks with plasics around.
after pushin the stick into the jack the connectors were pushed down. at the next day the device had low battery cause the power adapter couldnt load the battery...

i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??

can't you just return it?

k_otix99 said:
i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??
Click to expand...
Click to collapse
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine

austinsnyc said:
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine
Click to expand...
Click to collapse
i cant tell if the device will go into bootloader. it will not light up totally black screen. I flashed the ATT rom you posted before it totally died hoping that it would reset the issue if it was software based. it didnt fix the issue though.
jallenclark said:
can't you just return it?
Click to expand...
Click to collapse
I plan on it but i hoped to be able to fix the issue myself. I have been able to fix my hermes in the past with the help of the XDA community.

Bricked HD2 Help......

No Boot loader
Not charging
No lights
Nothing by pressing vol down and power buttons
Nothing by pressing both vol buttons and reset button
Turned off for hours without battery and pressed power button for long time to drain the battery and turned back on.
Nothing works any more ideas.
But when I connect it to my laptop it does make a notification sound that a new device is connected and is called the qualcomm cdma technologies msm.
If I have bricked it and no solutions and I have warranty should I call HTC or my insurance company?

See..
http://forum.xda-developers.com/showthread.php?p=7444943#post7444943

OK,try this! Remove the Battery-Cover. Look at the Space between the Battery and the Phones Frame on the lower side,on the right of our SIMcard. If you can see two small Pins,remove the battery, and reinsert it carefuly,so that the two Pins are touching the contacts on the Battery...

what happened?
flashing fail? any details please.
DN41

When experiencing any kind of problems its always usefull to post what you was doing before the problem occured. With no other information, there is no way to do any kind of propper trouble shooting.
Its like droping your car at a garage, say it has problems and walk away. Was it that you ran out of gas, did you battery failed or the engine, is it only a lightbulb that doesnt work. A car mechanic wont be able to help you with the car problem cuz he dont know what kind of problem you were experiencing
Try to recharge your phone by default loader (not by pc-USB) for a few hours and try to boot again. Or try entering boot loader while pressing volume down and power on after a few hours of loading.

I agree.
The issue has been posted like a telegram being sent to a grandchild for her nanny's funeral...!!
No one will probe you for your issues. You need to provide as many details as to how you r***ed your HD2..!!

Hi
i have pretty much the same problem. I got this phone on ebay because someone tried to put another rom on it and failed due to an power failure (thunderstorm).
When i connect the phone to the computer via USB, it recognizes a Qualcomm CDMA MSM Driver but cannot install it.
About the phone:
No lights, no bootloader, nothing. It becomes warm while charging so i assume the hardware is not faulty. I guess the bootloader is broken.
Do you have any idea how to save this phone?

i had once a similar issue...
i flashed and failed (not really, cause it works again )..
everything was the same only that i could get access to bootloader (and so my leo booted up).
but when it was powered off and i connected it to my pc, it also recognized a qualcomm device...
badly, that doesnt help you...
i have no plan how to get this work again...if the phone doesnt turn on...
maybe its time for a prayer.
DN41

I just found this thread, and hoping someone has come up with an answer, though I havn't actually searched the threads yet as i just got the phone today, cause someone bricked it trying to unlock it (I assume because his only clue was I might need to flash a different rom). But its the same symptoms, no lights, dosn't show charging, attempts to install a qualcomm CDMA MSM driver when connected to windows pc.
Is there a solution?
Thank you in advance for your replys.

DemonLoader said:
I just found this thread, and hoping someone has come up with an answer, though I havn't actually searched the threads yet as i just got the phone today, cause someone bricked it trying to unlock it (I assume because his only clue was I might need to flash a different rom). But its the same symptoms, no lights, dosn't show charging, attempts to install a qualcomm CDMA MSM driver when connected to windows pc.
Is there a solution?
Thank you in advance for your replys.
Click to expand...
Click to collapse
Nope. You're screwed.

[Q] G5 Nexus one clone

I have a G5 Nexus one clone with Dual sim, 1Ghz CPU,Windows mobile 6.5, GPS, 480*800 resolution 512Mb RAM & 512MB ROM.
I had edited the registry using Tweaks registry tricks for Windows Mobille & when it restarted it starts up with a screen that says 'SMART' and then goes to a black screen forever. When i try to hard reset using nexus one procedure, it comes to a screen with a green arrow pointing to the back of the same phone in the image on screen & at the bottom you have 'Downloading...' The phone does not respond after this, it just restarts after a while & ends up on a black screen as i mentioned above as if it were booting.
I need help with restoring the phone as quickly as possible with lesser effort or some technique to get back working and if possible with some new benefits. I'm sure im asking for too much but most importantly, i just want to get the phone working normally.
This phone says 'Made in Taiwan' at the back under battery, although i dont beleive it & i purchased it on ebay
I will be deighted and greatfull if anyone can help. If you need any other info, please let me know

g5 nexus 1 dual sim does not boot after startup logo "smart"
same problem here too. Is there any solution for this? Please help. I install sk tools . After that this problem started.

KKrraajjaa said:
same problem here too. Is there any solution for this? Please help. I install sk tools . After that this problem started.
Click to expand...
Click to collapse
Having the same problem. Need firmware. who has?

[Q] Please help me

ok call me a noob call me anything but please do help me out.. Was running ICS XXLPY on my samsung Note N7000 ofcourse with problems such as frequent restarts, over heating and etc etc.. Till i found http://forum.xda-developers.com/showthread.php?t=1354888 (no i do not blame the author or the developer of the thread/process.. but only myself) namely method to remove the yellow traingle with the 'jig' .. And that is the part i missed completly.. put into download mode and did the complete the process (atleast i thought i had completed) with pc odin. Till i read the 7th line to connect the jig.. and thats where i just did not have do not have.. anyways i removed the battery waited a few seconds and tried restrting .. but got a black screen and could only hear the sound ofcouse touch was responsive as well but black screen.. Took out the battery again and tried to put into whatever mode it would go while toggling/playing with the volume up/down power and menu buttons 3-4 times but nothing.. It still does get on though with a black screen.. can accept calls talk.. but all on a black screen.. touch is responsive .. my bluetooth headset is.. but the screen is black.. Any help shall be much appreciated

Were you able to find a solution to this problem?
I am asking because even i have the irritating yellow triangle, but i know that the method to remove it is risky so i am not doing it as of now. So i am curious if you were able to manage to salvage your phone?
Thanks

For the record, you can use TriangleAway by Chainfire to remove the yellow triangle. I mean, make sure you're kernel/rom support it, but if it is stock ones than it should. I'm not sure about the new CM9/CM10 ones.

First of all, let me ask you a question, do you really have a usb jig?
If you don't have one, then why did you gone to that route of that link (how to remove yellow triangle.. with a JIG) if you don't have one in the first place? kinda stupid following that link when you don't' even have a usb jig at all.
Also, why on earth would you resolve your frequent restarts and heating problems by that link? (How to remove yellow triangle thru a USB JIG)? how does that really resolve your issue? I'm quite amazed your phone still has things working (BT , touch is responsive you say?), MAN, you totally GOOF UP! Your solution is entirely NOT the answer to your initial issues and you made it more aggravating to the fact that you followed a wrong solution!.
That's not even the answer to your problem!! Geez! Dumb as it can be but surely you need to search first the right solution to your problem before you apply one right?
My advice to you is, buy a USB JIG... try to see if you can bootup your screen using it. And by the way.. POST Your questions first before you do something okay??? ask first then do it.. not the other way around!!
tsk!

rhl.thakur said:
Were you able to find a solution to this problem?
I am asking because even i have the irritating yellow triangle, but i know that the method to remove it is risky so i am not doing it as of now. So i am curious if you were able to manage to salvage your phone?
Thanks
Click to expand...
Click to collapse
u just need to use the triangle away by chain fire. I have tried it and it worked..
Sent from my GT-N7000 using xda premium

[Q] touchscreen not working.

hi all,just got a gt s6500 for my son. Replaced the LCD screen which was broken,replaced the touch screen as well,put the phone back together,phone boots up normally ,but nothing happens when you touch the screen. No response from it at all. i am now out of ideas how to get the phone to work. Anyone with any idea how to get it up and running again . Any help would be gratefully received. Thanks for your time.

Maybe u need other drivers for the new touch screen, but i dont know how u can install drivers at android?

crazy trucker said:
hi all,just got a gt s6500 for my son. Replaced the LCD screen which was broken,replaced the touch screen as well,put the phone back together,phone boots up normally ,but nothing happens when you touch the screen. No response from it at all. i am now out of ideas how to get the phone to work. Anyone with any idea how to get it up and running again . Any help would be gratefully received. Thanks for your time.
Click to expand...
Click to collapse
There is a new thread in the general section on how to fix your phone touchscreen which should work for you .
Here is the link - http://forum.xda-developers.com/showthread.php?t=1505412
Hope it works :fingers-crossed:
Press thanks if i helped you.

crazy trucker said:
hi all,just got a gt s6500 for my son. Replaced the LCD screen which was broken,replaced the touch screen as well,put the phone back together,phone boots up normally ,but nothing happens when you touch the screen. No response from it at all. i am now out of ideas how to get the phone to work. Anyone with any idea how to get it up and running again . Any help would be gratefully received. Thanks for your time.
Click to expand...
Click to collapse
I'd recommend to check if the touchscreen you replaced with, is a faulty one or not.
Or maybe the reason would be about the connections. Just open the phone and reconnect the pins and try again. If still doesn't work, try my first point.