i flashed ny phone with cm10.1 and gapps with all the wipes needed in here:
http://forum.xda-developers.com/showthread.php?t=2225347
and now my phone is stuck on boot-loop for more than 20 minuts what can i do??
please....
Hi idan
put out your battery and then go into recovery again, wipe everything and reflash it.
haendler said:
Hi idan
put out your battery and then go into recovery again, wipe everything and reflash it.
Click to expand...
Click to collapse
thanks man, it works! but with cm10.1 the phone does not recognise the internal SDcard (in recovery it does)' is there a way to fix that to?
What hboot are you using?
haendler said:
What hboot are you using?
Click to expand...
Click to collapse
1.25 and i can't update to 1.28 any way
Thats not good there is no support for hboot 1.25 and that maybe causes your SD card Problem
Try updating hboot thats going to fix your Problem i think
Sent from my Sensation XL using xda app-developers app
haendler said:
Thats not good there is no support for hboot 1.25 and that maybe causes your SD card Problem
Try updating hboot thats going to fix your Problem i think
Sent from my Sensation XL using xda app-developers app
Click to expand...
Click to collapse
thats what i'm saying, i can't update my hboot, i tried all the posible ways and it stays on 1.25
Try this
Download ESfile Explorer from Play Store and go to settings and then root settings and give it root privileges. Once thats done go to root of phone and go to /system/etc and find a file called vold.fstab and open it with a text editor and find this line
dev_mount sdcard /mnt/sdcard 34 /devices/platform/msm_sdcc.2/mmc_host
now for 1.25 hboot you will need to change where it says 34 to 33
Click to expand...
Click to collapse
Hopefully it helps you, but this is no permanent solution
i recommend you to update hboot
Thats strange why update hboot is not working for you
haendler said:
try this
hopefully it helps you, but this is no permanent solution
i recommend you to update hboot
thats strange why update hboot is not working for you
Click to expand...
Click to collapse
it already says 33
Mhh than i don't know sorry. Here is the Guide for SD-Card-Fix
http://forum.xda-developers.com/showthread.php?t=1863222
Maybe one of the two other way helps you
haendler said:
Mhh than i don't know sorry. Here is the Guide for SD-Card-Fix
http://forum.xda-developers.com/showthread.php?t=1863222
Maybe one of the two other way helps you
Click to expand...
Click to collapse
the problem in the phone is that when the phone is in the rom, i can't use the internal sd card, but on recovery i can see the files on the card
do you think this can help?
http://forum.xda-developers.com/showthread.php?t=1977267
idan_abargel said:
the problem in the phone is that when the phone is in the rom, i can't use the internal sd card, but on recovery i can see the files on the card
do you think this can help?
http://forum.xda-developers.com/showthread.php?t=1977267
Click to expand...
Click to collapse
Use fix Jelley bean.
idan_abargel said:
the problem in the phone is that when the phone is in the rom, i can't use the internal sd card, but on recovery i can see the files on the card
do you think this can help?
http://forum.xda-developers.com/showthread.php?t=1977267
Click to expand...
Click to collapse
update hboot....
chithienvu said:
Use fix Jelley bean.
Click to expand...
Click to collapse
ok
chithienvu said:
Use fix Jelley bean.
Click to expand...
Click to collapse
yes!! it works man ! you are the best
ok man:laugh:
Related
Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Sent from my ADR6300 using Tapatalk
To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.
bradatz said:
Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Click to expand...
Click to collapse
The file download for the radio is in the Unrevoked forever thread.
Sent from my rooted IncrediblÄ™
tats_06 said:
To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.
Click to expand...
Click to collapse
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?
zeke1988 said:
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?
Click to expand...
Click to collapse
It already saves it as PB31IMG.zip....so just move it to root and go on with process.
That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk
bradatz said:
That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
He said the thread, not the wiki.
I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?
Sac's Droid said:
I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?
Click to expand...
Click to collapse
Make sure the sdcard is formatted as fat32 and that the zip name is exactly "PB32IMG.zip", exact casing and make sure also that its not .zip.zip
OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.
Sac's Droid said:
OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.
Click to expand...
Click to collapse
Anytime. (10 characters blah)
Hold the optical pad and the power button...not the vol down key and give it a shot
Radio update isn't working for me. Saved PB31IMG.zip to the root of my FAT32formatted SD card, rebooted, it found the PB31IMG.zip file, went though the loading process, got the point where it said "checking" and then went back to the menu without loading the update. I've downloaded the radio update twice with the same results. I currently have the 2.05.00.06.11 radio but have not yet installed s -off. Do I need to do that first?
Any other suggestions?
EDIT: Nevermind, I installed the unrevoked forever s -off patch and the radio update seems to be installing now.
EDIT 2: Radio update updates kernal to .32 correct?
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
Very bad idea...you may end up with a brick using a ROM from a different phone.
Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
NO
this is not a good idea, junior
jdkoreclipse said:
Is that a definate? I know about bricks annd stuff but in curious.
Ps im not noob
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
how bout the f-in hardware drivers? would that work....
like a napalm full of facepalm
Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.
Milton1964 said:
Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.
Click to expand...
Click to collapse
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)
obededom said:
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)
Click to expand...
Click to collapse
What just happened to Shadowmite's Unrevoked Forever post in Development. It disappeared?
hi guys i have doubt in flashing a radio
Y i should use the adb commands to push the file, ??
I can use the sd card method of PG32IMG.zip and install na??
Will i end in bricking my phone ?
Im flashing the new radio 20.2811.30.085AU_3805.09.03.27_M for my Nik_IncredibleS_TriNiTy_SensationXL V 2.0
Im weak at adb commands.. though i figured it somehow but got
C:\Users\Sumo the Rider>adb push C:\android-sdk-windows\platform-tools\PG32IMG.z
ip I:\
failed to copy 'C:\android-sdk-windows\platform-tools\PG32IMG.zip' to 'I:\': Rea
d-only file system
I do need a detailed procedure of flashing the radio
Thanks in advance
There's threads all over the forum about this, u just have to hit the search button, but for me the easyest way was too boot into bootloader, NOT recovery, and it will instantly recognise the zip folder. Make sure u havnt got any other folders with the same name in your ad card, that u have a decent amont of battery and that u don't remove the battery when flashing as this will brick ur phone! Follow that and ur good to go
Sent from my HTC Incredible S using XDA App
Can i straightly copy the PG32IMG.zip file to the sd card and flash through bootloader?
Is it safe?
santhoshpirate said:
Can i straightly copy the PG32IMG.zip file to the sd card and flash through bootloader?
Is it safe?
Click to expand...
Click to collapse
when you will copy the zip file to the root of your card and boot into the bootloader it will just ask you to update (yes/no) select yes...wait for the completion and when you are done ...restart!
ajeya said:
when you will copy the zip file to the root of your card and boot into the bootloader it will just ask you to update (yes/no) select yes...wait for the completion and when you are done ...restart!
Click to expand...
Click to collapse
Is that all ? No need adb commands and all to move the file and check md5 sum ah???
Thanks for replying..
Sent from my HTC Incredible S using xda premium
santhoshpirate said:
Is that all ? No need adb commands and all to move the file and check md5 sum ah???
Thanks for replying..
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
yes but check the md5 sum of the radio obviously(for safety). and there is a button for thanks
ajeya said:
yes but check the md5 sum of the radio obviously(for safety). and there is a button for thanks
Click to expand...
Click to collapse
Other than root... do I need to do radio S-off?
Sorry noob here
I don't think there actually is anything such as radio S-OFF. Check out
scoobysnacks replies in this thread, should give you all the info you need
http://forum.xda-developers.com/showthread.php?t=1308254
Shinobee said:
Other than root... do I need to do radio S-off?
Sorry noob here
Click to expand...
Click to collapse
there is no such thing as a radio s-off. you just need a normal s-off ...
then
copy the PG32IMG.zip file in your sd card's root.
power off your phone. (turn off fastboot from settings>power)
wait about 30 secs. turn on your phone using power+vol down.
you will see a message in your bootloader asking to update (yes/no)
select yes. then wait. after a while it will say to reboot.
restart ...delete the PG32IMG.zip file from your sd card. njoy.
thanks to all !! I upgraded my radio now!! Will my message delay reception issue be fixed by upgrading the radio?
santhoshpirate said:
thanks to all !! I upgraded my radio now!! Will my message delay reception issue be fixed by upgrading the radio?
Click to expand...
Click to collapse
You should test it and let us know,mine solved by that
Sent from my HTC Incredible S using Tapatalk
well what i had experienced is that changing the radio solved 90% of my sms delay problems. but when i tried cm7 ...it was close to perfection. (dont know why)
now its ok!! nearly 85% of my msg delay reception solved! Luckily i got fixed the signal problem also! its 100% fine
hi all after fix premission in the rom,my phone storage is not working good and i change over and over the rom and wipe and... but the problem is not fixed the storage is good working in the recovery.
please help me
thanks
Which ROM you are in?
Also did you do wipe data cache and dalvik?
dark_7qe said:
hi all after fix premission in the rom,my phone storage is not working good and i change over and over the rom and wipe and... but the problem is not fixed the storage is good working in the recovery.
please help me
thanks
Click to expand...
Click to collapse
omfg. read my signature.
bondarun said:
Which ROM you are in?
Also did you do wipe data cache and dalvik?
Click to expand...
Click to collapse
i have bindroid and xl 3.6 1.5we and xl3.6 1.6
stona175 said:
omfg. read my signature.
Click to expand...
Click to collapse
which part i study???
my phone is s-off and i update the radio
oooooooooops
thanks my friend i install stock ruu and my problem fixed
i instal stock ruu every think ok but when i install custom rom (bindroid,xl,...)
the storage capacity............ help me
any body at home??????????
it your vold.fstab. change the value. 34 for old hboot(1.25) and 33 for new hboot(1.28)
nashshafrulrezza said:
it your vold.fstab. change the value. 34 for old hboot(1.25) and 33 for new hboot(1.28)
Click to expand...
Click to collapse
what is the value?????????????????????????????????
my hboot is 1.28
it should be fine if new hboot. may i know, which rom ROM you have flash and exist the problem? is it an old ROM?
nashshafrulrezza said:
it should be fine if new hboot. may i know, which rom ROM you have flash and exist the problem? is it an old ROM?
Click to expand...
Click to collapse
I dont have old rom.my roms is new but i have 2 rom :
1.stock ruu
2.custom
i have problem with custom roms and i change my custom rom (bindroid and xl)
but my problem not fixed.
i mean you are using old base custom rom.
here, use one of this. Should be fine.
http://forum.xda-developers.com/showthread.php?t=1649402
http://forum.xda-developers.com/showthread.php?t=1528889
nashshafrulrezza said:
i mean you are using old base custom rom.
here, use one of this. Should be fine.
http://forum.xda-developers.com/showthread.php?t=1649402
http://forum.xda-developers.com/showthread.php?t=1528889
Click to expand...
Click to collapse
I using the latest version of this rom
http://forum.xda-developers.com/showthread.php?t=1649402
this rom working good when i using fix premission this problem arose.
I am confident the problem is not the rom
i say this when i using wipe dalvik cache i see error report
(e:unknown volume for path [/sd-ext])
and then i press yes to finish and recovery report to finish dalvik cache
dark_7qe said:
I using the latest version of this rom
http://forum.xda-developers.com/showthread.php?t=1649402
this rom working good when i using fix premission this problem arose.
I am confident the problem is not the rom
i say this when i using wipe dalvik cache i see error report
(e:unknown volume for path [/sd-ext])
and then i press yes to finish and recovery report to finish dalvik cache
Click to expand...
Click to collapse
yeah, that is the command that you would always see when wipe dalvik cache. It is nothing. Dont worry about it.
nashshafrulrezza said:
yeah, that is the command that you would always see when wipe dalvik cache. It is nothing. Dont worry about it.
Click to expand...
Click to collapse
ok.but what do i with my problem??????
Same thing happened to me and I found a solution which was posted on another thread in the Development section (forgot which one, sorry).
Basically, flash this AFTER flashing your new rom and your sd card mount should be working fine again. Hope it helps
nipsadinio said:
Same thing happened to me and I found a solution which was posted on another thread in the Development section (forgot which one, sorry).
Basically, flash this AFTER flashing your new rom and your sd card mount should be working fine again. Hope it helps
Click to expand...
Click to collapse
thanks a milion my friend it fixed my phone
zupp guys, so i was out skating yesterday and my phone fell out of my pocket and when i was going to use the camera today i just get the cant connect to camera error! please help a brother out here atleast how i can get my warranty back to fix it? im unlocked with htcdev and still s-on Thanks:fingers-crossed:
alex11x said:
zupp guys, so i was out skating yesterday and my phone fell out of my pocket and when i was going to use the camera today i just get the cant connect to camera error! please help a brother out here atleast how i can get my warranty back to fix it? im unlocked with htcdev and still s-on Thanks:fingers-crossed:
Click to expand...
Click to collapse
run the downgrade script and flash the ruu from this page: http://forum.xda-developers.com/showthread.php?t=1705913
it will downgade your hboot and put gingerbread back on. then you can ota to the newest update and sent it back for warranty.
all you need to do is follow section 1 from that guide. dont do the s off bit ;p
make sure your running a custom rooted rom like cm7 or icecold sandwich and usb debugging is enabled.
naathaanb96 said:
run the downgrade script and flash the ruu from this page: http://forum.xda-developers.com/showthread.php?t=1705913
it will downgade your hboot and put gingerbread back on. then you can ota to the newest update and sent it back for warranty.
all you need to do is follow section 1 from that guide. dont do the s off bit ;p
make sure your running a custom rooted rom like cm7 or icecold sandwich and usb debugging is enabled.
Click to expand...
Click to collapse
Thanks bro, im not there yet but that part about goldcard? do i whant to create one?
alex11x said:
Thanks bro, im not there yet but that part about goldcard? do i whant to create one?
Click to expand...
Click to collapse
shouldnt have to because your already s on. wouldn't hurt but. i answered yes during mine just make sure you back up the sd card because gold card will wipe it
naathaanb96 said:
shouldnt have to because your already s on. wouldn't hurt but. i answered yes during mine just make sure you back up the sd card because gold card will wipe it
Click to expand...
Click to collapse
so should i remove the sd card before doing this?
alex11x said:
so should i remove the sd card before doing this?
Click to expand...
Click to collapse
you need sd card for gold card. just make a new folder on your computer.copy sd contents to that. wipe it. then make gold card
Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
mohitgalaxy3 said:
Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
Click to expand...
Click to collapse
Have not had that issue
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
I have flashed CM7 lastest nightly and I didn't boot it up and at the same time I have flashed the gbgapps zip as well.
Can that be a problem or not ??
Figured it out my self, flashing the google app without booting cause the boot loop.
Thread closed
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
mohitgalaxy3 said:
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
Click to expand...
Click to collapse
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Nonverbose said:
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Click to expand...
Click to collapse
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
mohitgalaxy3 said:
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
Click to expand...
Click to collapse
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Nonverbose said:
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Click to expand...
Click to collapse
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
mohitgalaxy3 said:
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
Click to expand...
Click to collapse
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Nonverbose said:
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Click to expand...
Click to collapse
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
mohitgalaxy3 said:
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
Click to expand...
Click to collapse
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Nonverbose said:
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Click to expand...
Click to collapse
really for just wifi, I have to do that much???
mohitgalaxy3 said:
really for just wifi, I have to do that much???
Click to expand...
Click to collapse
2 things? No you don't have to do it, and as I don't have the issue I cant even say that it will work. There's always other options...