Database Develop

[Q] Arco's Recovery

Hello. I recently installed Arco's recovery and ICS (cm9), but now I have to install a Gingerbread - based rom. Is Arco's recovery compatible with non - ics roms or do I have to flash the old cwm again?
Thanks.

xMirmo said:
Hello. I recently installed Arco's recovery and ICS (cm9), but now I have to install a Gingerbread - based rom. Is Arco's recovery compatible with non - ics roms or do I have to flash the old cwm again?
Thanks.
Click to expand...
Click to collapse
Hello I am using Arco too~~may I ask u that how to install the recovery and ICS?
I rooted Arco already, should I try to unlock the BL and then install an ICS ROM for LT18?
really dun know what to do....
thanks very much~~~

Can you still go to recovery? If you can reflash CM9 to get CWM back. If you don't flash a new kernel with odin

Well... if you install a new ROM your recovery gets lost so you'll have to flash it again anyway.

CWM 6
I've built a new recovery. Could someone test it? Here is the link: https://docs.google.com/file/d/0BwlE_OdJFnPgLUdUcG55R0dUMGs/edit#
You can flash it using broodplank's Quick Flasher or with dd command. Flash it at your own risk.

Devil Kernel Jelly bean

hey guys..i want to flash the new gnexus jelly bean port v6.1 and i don't know how to install the devil kernel...after i install the rom i need to reboot my phone and then full wipe and install the kernel?

You install them with CWM Recovery, I don't know if a wipe is needed but you can make one just to be safe.

rAuL7sMok3 said:
hey guys..i want to flash the new gnexus jelly bean port v6.1 and i don't know how to install the devil kernel...after i install the rom i need to reboot my phone and then full wipe and install the kernel?
Click to expand...
Click to collapse
Hey
its not necessary to make a wipe while flashing the kernel(ONLY THE KENEL)
its flashed after the installation of the rom is complete..

Devil Kernel will automatically wipe cache and Dalvik. Just throw the Zip onto your internet SD and flash from CWM. That's all.

Help. I done exactly as you guys said (i'm using cm10 btw), and the boot screen now shows CM9 boot animation instead of cm10, is this normal? Also it is laggy (meaning it starts and stops). Normal??

Need double confimation before flashing

Hi,
Currently I am still on GB CheckROM v5 with franco kernel 6.Never flashed any ICS ROMs before.Now I would like to finally upgrade
So before flashing ICS ROM,i would like to double comfirm the steps which i have read
1.)Boot into recovery and install GB abyss kernel 4.2
2.)Reboot recovery to abyss kernel(Can i restart phone?)
3.)Wipe data / cache / dalvik
4.)Flash ICS ROM
5.)Reboot phone
Side Qn,I have GB apps that is not updated to ICS compatibility, if i try to restore them,will it cause conflict?
Thanks!

If you're on a rooted GB, you don't need the Abyss step.
Also, when you move to ICS, using NoteCore, SpeedMod, any CM9/10 kernel are 100% safe to flash from.
ROM recommendations, CleaNote, KingDroid 7.1 and Asylum 20 (CM9-based) are my favorite.

Have a look to 'ROM Switching' on my signature.

Hi dr.ketan
I have read yr ROM switching guide.Great guide btw
I would like to clarify that the steps are for stock ICS ROMs?
cause I would like to flash from checkrom GB straight to criskelo's ICS V11.2(Post #2 says flash abyss then to criskelo ROM).I do not have to flash stock ICS ROM first correct?
Thanks!

JxXxn said:
Hi,
Currently I am still on GB CheckROM v5 with franco kernel 6.Never flashed any ICS ROMs before.Now I would like to finally upgrade
So before flashing ICS ROM,i would like to double comfirm the steps which i have read
1.)Boot into recovery and install GB abyss kernel 4.2
2.)Reboot recovery to abyss kernel(Can i restart phone?)
3.)Wipe data / cache / dalvik
4.)Flash ICS ROM
5.)Reboot phone
Side Qn,I have GB apps that is not updated to ICS compatibility, if i try to restore them,will it cause conflict?
Thanks!
Click to expand...
Click to collapse
Thats tutorial is right..
Just flashing the rom from franco kernel..
But if u're not sure with franvo kernel n want follow all the tutorial u can do it..
2.reboot recovery to abyss kernel thats mean had u flash abyss kernel u must reboot recovery..
U can do normally reboot but u will get stuck..
Don't be afraid,u can use home + volume up +power button...
Sent from my GT-N7000 using Tapatalk 2

Can't flash from philz recovery

Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.

get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work

Iconia500 said:
Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.
Click to expand...
Click to collapse
When u flash kerenel u have to reboot into recovery so that flashing could take effect.
PhilZ JB kernel's are safe to wipe and philZ kernel's are best for TW based ROM's.
So if u running CM10,CM10.1,AOSP,AOKP,PA ROM's u shuold look for Hydra,Franco,etc..
And make sure that u reboot into recovery when u flash kerenel...

nokiamodeln91 said:
get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work
Click to expand...
Click to collapse
Hi thanks for the reply, I managed to flash the kernel with mobile odin, but I'm still unable to flash in cwm.

Are you able to format system with other kernel?

nokiamodeln91 said:
Are you able to format system with other kernel?
Click to expand...
Click to collapse
Yes and I always do before flashing a rom.

Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz

nokiamodeln91 said:
Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz
Click to expand...
Click to collapse
Thanks for your help anyway, at least I'm on the latest philz kernel now.

[Q] Rom problem

Hi all i have a problem with install rom.
I have a upgraded kernel thunder zap reloaded 3.5. Try to install rom Supressed Rom v 3.0. When i install the rom my phone stuck. I try to install any rom like Supressed Jelly Bean or OmegaRom X. All installation is stuck. Now my phone is frozzen no rom. Only CWM is work. Any idea how to start the phone.
Sry for my english.

saphiel said:
Hi all i have a problem with install rom.
I have a upgraded kernel thunder zap reloaded 3.5. Try to install rom Supressed Rom v 3.0. When i install the rom my phone stuck. I try to install any rom like Supressed Jelly Bean or OmegaRom X. All installation is stuck. Now my phone is frozzen no rom. Only CWM is work. Any idea how to start the phone.
Sry for my english.
Click to expand...
Click to collapse
I think you are trying to install GB roms... Supressed Rom 3.0 is for GB Look for roms with (JB) in front only. You may have to reflash with odin your JB rom if this is the case.

bobfrantic said:
I think you are trying to install GB roms... Supressed Rom 3.0 is for GB Look for roms with (JB) in front only. You may have to reflash with odin your JB rom if this is the case.
Click to expand...
Click to collapse
Yes you have right. Only reflash on odin is work. THX :victory:

saphiel said:
Yes you have right. Only reflash on odin is work. THX :victory:
Click to expand...
Click to collapse
you are welcome, go ahead and click the thanks button(s) lol

i have the same problem supressed rom based on JB ... then i reinstall JB via odin then try again to install chucky-bean master rom and again it's stuck on logo samsung galaxy s GT-I9070 no boot animation working nothing ... only recovery mod i tested that with thunderzap 3.5 kernel ...

Brocky2011 said:
i have the same problem supressed rom based on JB ... then i reinstall JB via odin then try again to install chucky-bean master rom and again it's stuck on logo samsung galaxy s GT-I9070 no boot animation working nothing ... only recovery mod i tested that with thunderzap 3.5 kernel ...
Click to expand...
Click to collapse
Wipe cache, dalvik cache and do factory reset in CWM.

First thing before i install the custom rom was doing the next steps:
-format system
-format cache
-format data
-wipe data/ factory reset
-wipe chache
-wipre dalvik
then i select chucky-bean master rom
then i do again wipe chache and wipre dalvik
then reboot and after reboot it was stuck ...

Just flashed Supressed Jelly Bean build 3 Rom with CWM 6.0.1.5 prom shaaan ( just put the update.zip into sdcard then install it from CWM) and it works so you can try now i hope i helped you