Database Develop

[Q] [Q&A]stuck in samsung logo!

Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.

thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
You will always have that problem coz the ROMs you flashed requires GB. so go flash GB first before you install CWM and custom ROMs..

thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
it should be 2.3.4 before you installing CWM

HERE IS WHAT YOU NEED:
1. YOU NEED TO FLASH YOUR PHONE TO GINGERBREAD 2.3.4
2. AFTER FLASHING STOCK ROM, ROOT IT!
3. INSTALL CLOCK WORK MOD
In this part, it is now the installation of your CUSTOM MADE ROM
1. Wipe Dalvick Cache
2. Wipe Data/Reset
3. Wipe Cache
4. Install Zip from sd card then locate the zip file
5. YOUR GOOD TO GO!
BTW: Always wait for the rom to load, it may take awhile to load if it is installed for the first time
Like If this helped you THANKS

What's your model number? ?
You need to flash GB-
Using Odin multi downloader+tass and also need CWM(for flash CM)...
Sent from my GT-S5570 using XDA

Thanks buddies...but already found a way out now my phone is working.

Devil Kernel Jelly bean

hey guys..i want to flash the new gnexus jelly bean port v6.1 and i don't know how to install the devil kernel...after i install the rom i need to reboot my phone and then full wipe and install the kernel?

You install them with CWM Recovery, I don't know if a wipe is needed but you can make one just to be safe.

rAuL7sMok3 said:
hey guys..i want to flash the new gnexus jelly bean port v6.1 and i don't know how to install the devil kernel...after i install the rom i need to reboot my phone and then full wipe and install the kernel?
Click to expand...
Click to collapse
Hey
its not necessary to make a wipe while flashing the kernel(ONLY THE KENEL)
its flashed after the installation of the rom is complete..

Devil Kernel will automatically wipe cache and Dalvik. Just throw the Zip onto your internet SD and flash from CWM. That's all.

Help. I done exactly as you guys said (i'm using cm10 btw), and the boot screen now shows CM9 boot animation instead of cm10, is this normal? Also it is laggy (meaning it starts and stops). Normal??

Not able to install paranoid on my note

hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note

chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?

chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?

Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app

Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note

Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app

It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note

Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app

Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?

when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?

Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...

if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....

rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb

your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?

rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid

you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)

rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo

Maybe you have a corrupted download. Check md5 sum to verify.

sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine

chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers

[Q] Unsure on How to install Paranoid Android

Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.

Nazeiro said:
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Click to expand...
Click to collapse
Since you are on Hydracore it is safe to wipe. But just to be sure just take a nandroid backup, by Booting in to recovery
Selecet Backup & restore--> Select Backup & do a nandroid backup Then just follow the installation procedure below
Keep both the ROM & Gapps file on your SD card
Wipe data / factory reset
Wipe Cache Partition
Go to Advanced - > Wipe Dalvik Cache
Select Install Zip from SD Card--> Select either internal card or SD card (external sd ) based on where you kept the file-->Install the zip file of the ROM
Same way Select & install the Gapps package
Go Back & wipe Cache Partion & Dalvik Cache once again
Reboot & you are Paranoid...:good:

the best advice I can just offer you is to go to the respective Paranoid Android ROM thread and post this question there. There many people there as well willing to help you. Or you can wait for someone who has PA already on their device and perhaps they can give you some nice info on how to go about installing PA on your phone.
sorry, I can't do much help on you as I'm not using JB for now.

You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.

Help i am stuck on the PA logo
singh.harvinder said:
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Click to expand...
Click to collapse
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?

You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2

Do i need to...
Utacka said:
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Click to expand...
Click to collapse
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?

Nazeiro said:
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Click to expand...
Click to collapse
Yes you need to factory reset when coming from another rom that is not aosp based, i.e stock gb/ics.
Skickat från min GT-N7000 via Tapatalk 2

Nazeiro said:
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
Click to expand...
Click to collapse
I think you need to read instructions to the point before carrying them out. I had posted you the method for installation of PA which so far as I know is the correct one coming from any non AOSP based ROM. Pls. do follow the instructions. In case you are in doubt just ask for a reconfirmation.
Also any ROM developer will have the instructions posted in the OP thread, which you should definitely follow.
As others have told you, do a full wipe coming from a non AOSP based ROM..

By the Way if your problem is solved just change the OP title to Solved..

In regards to doing a full wipe: When doing the same process a couple of weeks back, coming from a stock ICS rom to PA i read you need to do a full wipe.
google brought me to this page: http://checkrom.com/threads/full-wipe-the-correct-way.432/
do you guys consider wipe/factory reset to be sufficient or is it a good idea to do this manual format of the /system/ /data/ and /cache/ partitions as per the above guide?
I was in a bit of doubt on that one at the time, so i did it anyway to be on the safe side and it all worked fine.

Paranoid android
Hey :laugh:
Someone can tell me what's the difference between the Paranoid rom from Imilka (PARANOIDANDROID 2.1 http://forum.xda-developers.com/showthread.php?t=1797698) and the Paranoid rom from Utacka (PARANOIDANDROID 2.15 http://forum.xda-developers.com/showthread.php?t=1871713)????

To be sure
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer

kokodv said:
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
Click to expand...
Click to collapse
yea, hydracore is safe, flashing using hydracore is safe
Skickat från min GT-N7000 via Tapatalk 2

galaxy note from 4.4.1 to 4.0.4 downgrade

How to downgrade from KitKat to jelly bean 4.1.2 through recovery

You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000

kaborayyan said:
You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000
Click to expand...
Click to collapse
Or he just has to flash kernel for stock based ROMs and then flash some 4.0.x ROM.

I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)

sasabo said:
I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)
Click to expand...
Click to collapse
same way you flashed omni.

nokiamodeln91 said:
same way you flashed omni.
Click to expand...
Click to collapse
any tutorial?

sasabo said:
any tutorial?
Click to expand...
Click to collapse
boot recovery
wipe data and cache
install new rom
reboot

Wipe Data/Factory reset” or not?

sasabo said:
Wipe Data/Factory reset” or not?
Click to expand...
Click to collapse
Same as step 2

which cwm to flash,philz v5 or kitkat v 6?This say by sweet rom: Flash any Philz JB Kernel (after 4.35 cwm but recommend any newer than 4.89.4).
Do I need to flash an older version of CWM recovery when I switched back to JB 4.1.2?

How to revert back from Omni ROM KitKat to Stock Jellybean Rom on my N7000
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .

lakkuMS said:
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .
Click to expand...
Click to collapse
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.

I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?

doloresanto said:
I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?
Click to expand...
Click to collapse
Steps are correct... Use the recovery option to wipe data / factory reset ..instead of the settings menu.

Do I have to root my device to use PC Odin?

doloresanto said:
Do I have to root my device to use PC Odin?
Click to expand...
Click to collapse
No

nokiamodeln91 said:
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.
Click to expand...
Click to collapse
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks

vishvish3 said:
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks
Click to expand...
Click to collapse
Yes you will need to get CWM.. flash raw or philz kernel and then reboot recovery, wipe and restore the backup.

Let me share my own experience
Whenever i wanna go back to jellybean from kitkat :
1. Do clean wipe
2. Flashing official gingerbread rom
3. And then installing jellybean..
I dont know why but whenever flashing jellybean after do a clean wipe it never works so what i do is flashing gingerbread first hehe
Sent from my GT-N7000 using XDA Free mobile app

I'm on 4.4.4 DU Rom.. The phone got hanged after I enabled the allow mock location option. Then the phone got stuck at the Samsung Logo screen. I went to recovery and tried doing factory reset, but it failed with error as unable to mount /data. After that recovery mode is not available, but I can go in Download mode. So, i tried to install JB 4.1.2 - N7000XXLTA via Odin. But the process gets failed after 'NAND write start'!!!
Any solution???