How to downgrade from KitKat to jelly bean 4.1.2 through recovery
You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000
kaborayyan said:
You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000
Click to expand...
Click to collapse
Or he just has to flash kernel for stock based ROMs and then flash some 4.0.x ROM.
I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)
sasabo said:
I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)
Click to expand...
Click to collapse
same way you flashed omni.
nokiamodeln91 said:
same way you flashed omni.
Click to expand...
Click to collapse
any tutorial?
sasabo said:
any tutorial?
Click to expand...
Click to collapse
boot recovery
wipe data and cache
install new rom
reboot
Wipe Data/Factory reset” or not?
sasabo said:
Wipe Data/Factory reset” or not?
Click to expand...
Click to collapse
Same as step 2
which cwm to flash,philz v5 or kitkat v 6?This say by sweet rom: Flash any Philz JB Kernel (after 4.35 cwm but recommend any newer than 4.89.4).
Do I need to flash an older version of CWM recovery when I switched back to JB 4.1.2?
How to revert back from Omni ROM KitKat to Stock Jellybean Rom on my N7000
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .
lakkuMS said:
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .
Click to expand...
Click to collapse
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.
I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?
doloresanto said:
I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?
Click to expand...
Click to collapse
Steps are correct... Use the recovery option to wipe data / factory reset ..instead of the settings menu.
Do I have to root my device to use PC Odin?
doloresanto said:
Do I have to root my device to use PC Odin?
Click to expand...
Click to collapse
No
nokiamodeln91 said:
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.
Click to expand...
Click to collapse
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks
vishvish3 said:
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks
Click to expand...
Click to collapse
Yes you will need to get CWM.. flash raw or philz kernel and then reboot recovery, wipe and restore the backup.
Let me share my own experience
Whenever i wanna go back to jellybean from kitkat :
1. Do clean wipe
2. Flashing official gingerbread rom
3. And then installing jellybean..
I dont know why but whenever flashing jellybean after do a clean wipe it never works so what i do is flashing gingerbread first hehe
Sent from my GT-N7000 using XDA Free mobile app
I'm on 4.4.4 DU Rom.. The phone got hanged after I enabled the allow mock location option. Then the phone got stuck at the Samsung Logo screen. I went to recovery and tried doing factory reset, but it failed with error as unable to mount /data. After that recovery mode is not available, but I can go in Download mode. So, i tried to install JB 4.1.2 - N7000XXLTA via Odin. But the process gets failed after 'NAND write start'!!!
Any solution???
Related
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?
Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)
rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo
Maybe you have a corrupted download. Check md5 sum to verify.
sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine
chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers
Hi guys.. Is there anyway i can get back to stock rom from MIUI rom? i flash Dr.Ketan ics stock rom but got stuck at Samsung logo.. any help?
Did you wipe cache and dalvic? DO NOT WIPE DATA USING STOCK ICS/KERNAL
Maby you could try flashing pre rooted GB Rom from our Doctor and wipe data once on safe GB. That's a good startingpoint.
By the way,stock ICS is NOT safe to wipe data with so I hope you didn't.
Download the below rom and install it via pc odin. The don't boot up yet. First boot into recovery and the. do a wipe data factory reset and then boot up.
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
Download the below rom and install it via pc odin. The don't boot up yet. First boot into recovery and the. do a wipe data factory reset and then boot up.
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/show...18&postcount=2
Click to expand...
Click to collapse
Thank you.. will try it.. Will keep you updated.
Did you wipe cache and dalvic? DO NOT WIPE DATA USING STOCK ICS/KERNAL
Maby you could try flashing pre rooted GB Rom from our Doctor and wipe data once on safe GB. That's a good startingpoint.
By the way,stock ICS is NOT safe to wipe data with so I hope you didn't.
Click to expand...
Click to collapse
well, before i flash the stock ics rom.. I wipe data/factory reset on cwm in MIUI Rom.. is it affect anything?
here is what i did and worked
HR7 said:
well, before i flash the stock ics rom.. I wipe data/factory reset on cwm in MIUI Rom.. is it affect anything?
Click to expand...
Click to collapse
i downgraded back from JB custom roms to stock german 4.0.4 because of its good battery life ..
1) be sure u are using a safe rooted kernel .. i used hydracore 4.3
2) download any gb stock rom from dr ketan's .. i myself downloaded the german one
3) on ur rooted custom rom, downloaded mobile odin pro .. it will ask for some updates
4) extract the downloaded stock gb rom , click on open files , choose the tar file , dont change anything , and then flash
5) after flashing is done i had a probl that it kept starting on the samsung logo .. dont panic just rstart in recovery mode and do wipe cache and data .. the gb is safe to do wipes .. NOW UR ON GB STOCK ROM and it's rooted
6) just downloaded the latest german ics from the same thead .. extract it and flash it using mobile odin BUT DONT WIPE ANYTHING AFTE IT'S DONE
7) it will reboot , install some updates ( dont panic it might take some time) and now you have the latest stock ics and its rooted and ready to flasb any good kernel
i dont know what kernel is the best for both battery life and performance
i downgraded back from JB custom roms to stock german 4.0.4 because of its good battery life ..
1) be sure u are using a safe rooted kernel .. i used hydracore 4.3
2) download any gb stock rom from dr ketan's .. i myself downloaded the german one
3) on ur rooted custom rom, downloaded mobile odin pro .. it will ask for some updates
4) extract the downloaded stock gb rom , click on open files , choose the tar file , dont change anything , and then flash
5) after flashing is done i had a probl that it kept starting on the samsung logo .. dont panic just rstart in recovery mode and do wipe cache and data .. the gb is safe to do wipes .. NOW UR ON GB STOCK ROM and it's rooted
6) just downloaded the latest german ics from the same thead .. extract it and flash it using mobile odin BUT DONT WIPE ANYTHING AFTE IT'S DONE
7) it will reboot , install some updates ( dont panic it might take some time) and now you have the latest stock ics and its rooted and ready to flasb any good kernel
i dont know what kernel is the best for both battery life and performance
Click to expand...
Click to collapse
Download the below rom and install it via pc odin. The don't boot up yet. First boot into recovery and the. do a wipe data factory reset and then boot up.
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/show...18&postcount=2
Click to expand...
Click to collapse
Thank you guys!! now my phone is back! thank you
hi guys.. i'm on ICS 4.04 with CRISKELO last ROM..
i'd like simply to go back to 4.0.4 stock ( rooted)
but what i really want to do is to CLEAN completely my phone.. WIPE FACTORY!!
can you please tell me the steps i should do?
thank you!
Download the same roms as above. install it and do a factory reset from recovery. The u can download ics and install it again.
nokiamodeln91 said:
Download the same roms as above. install it and do a factory reset from recovery. The u can download ics and install it again.
Click to expand...
Click to collapse
i can't just skip going back on GB?
you cant
Sent from my GT-N7000 using xda app-developers app
yes u can. install ics.. then install a safe kernel. then do a wipe and the. format usb storage.
I recommend philz kernel cuz it can be flashed from stock recovery.
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
installing this kernel. will give u root, cwm. and is safe as well.
all threads say its dengerous , i guess you should stay in thr safe side and it costs you nothing by the way .. all flashing is done using mobile odin and it doesn't takr any time , just couple of minutes and booooo you're safe
Sent from an Egyptian GT-N7000 ♥
el5arsawi said:
all threads say its dengerous , i guess you should stay in thr safe side and it costs you nothing by the way .. all flashing is done using mobile odin and it doesn't takr any time , just couple of minutes and booooo you're safe
Sent from an Egyptian GT-N7000 ♥
Click to expand...
Click to collapse
I'm using right now philz kernel and things are going very well really!
the point is i wanted to do a DEEP CLEAN of the phone.. and than install 4.0.4 LRQ stock and root it but stupid KIES doesn't recognize my phone anymore ( before was just working perfectly... )!!!
Would it work IF i ... copy the stock rom on my mobile..
reboot in recovery.. do the 3 wipes
restart recovery,,, (or maybe i don't even need to reboot..???)
flash the rom LRQ stock ?
or still i've first to install PHILZ kernel again?
little bit confused lol
if u want to clean install then go back to GB and then do a factory reset and format internal SD then download the stock firmware u want and install it via PC odin.. stock firmware comes in tar.md5 format. cwm wont be able to install it. u need odin or mobile odin
Hi all, so I'm currently looking for a way to go back to stock Touchwiz (4.0.3) from CM10.
I'm currently running CM10 and i do have a Nandroid backup from when I was on Touchwiz (and running PhilZ safe kernel), but the thing is I've been running CM10 for a few months and have a lot of new data stored on my phone.
So instead of backing up anything new and just restoring my backup, could i just flash a stock firmware through ODIN or CWM on top of CM10? Or if I tried that would I have to wipe anyway?
Thanks any help appreciated.
going back from custom to stock causes boot loops and a wipe will be necessary. so better do a nandroid backup of th current rom, then when in stock rom, use tb to restore data using the nandroid backup.
Sent from my GT-N7000 using xda premium
Ok this thread is dead but I will have to revive it now because I wanna do the same thing.
I have been on Cm10 and wanted to go to Alliance ROM today. So like a complete idiot I flashed pre-rooted KJ1 gingerbread ROM from Dr.Ketan over my CM10 and got stuck in a boot loop. Luckily had a nandroid backup and now restoring as I type.
What is the correct process to go from CM to stock GB or ICS?
Any and all help is appreciated
Thanks in advance.
Cheers,
Kaushik
EDIT: I flashed the pre-rooted GB ROM because I wanted to do a full wipe and then flash over to stock ICS and then to Alliance JB ROM.
What is the correct process to go from CM to stock GB or ICS?
Click to expand...
Click to collapse
Either flash using PC odin. after flashing if on GB, boot into recovery and do a factory reset. If on ICS, install a safe kernel (eg,Philz) and reboot recovery and do a factory reset,
OR
Flash a custom GB or ICS rom using recovery after all wipes and formats (system, data, cache)
So, this is what happened. I first upgraded to the latest official JB 4.1.2 XXLSA firmware. I noticed that it still wasn't as fast as I'd like, and wanted to try a custom ROM instead. I read through the guides in here and get that I have to downgrade to a GB ROM first in order for me not to hardbrick my phone. So, I download "N7000XBKK4 ------ 2.3.6 2011 November------- N7000OXXKK5--------------------- Nordic countries" from that list over stock ROM's in the Q&A root guide here: http://forum.xda-developers.com/showthread.php?t=1424997 . I follow the flashing guide to the letter, puts my phone in download mode, runs the flash via Odin, the phone restarts, and everything goes south. Basically this happens: When I start my phone it get's to the point in the GB initial startup where I'm to touch the Android to start, but then all it does is throw messages at me about this service and that service having stopped responding, untill the phone reboots. So now I have reflashed back to the JB ROM.
So basically, what am I doing wrong, and what can I do to make a proper downgrade so I can get rooted, install CWM and get down and get it on with some custom ROM's?
Thx in advance!
Same happened with me. I flashed GB and was getting force close messages. But not a big problem. Just flash GB rom again. And after flashing just delete all user data from recovery and reboot. U wont get those messages any more.
Sent from my GT-N7000 using XDA Premium HD app
You always need to WIPE data / factory reset after downgrading from JB .. GB is safe to go ahead.. if you choose ICS then first flash a safe kernel and then do wipe
It seems to me that KK5 is non wipe, which explains why you got those messages. The rest is detailed in nokiamodeln91's message BTW, JB is still not official for our Notes. What you installed was a leak with a safe kernel (if it was Philz).
nokiamodeln91 said:
You always need to WIPE data / factory reset after downgrading from JB .. GB is safe to go ahead.. if you choose ICS then first flash a safe kernel and then do wipe
Click to expand...
Click to collapse
Stock GB kernel its safe and Stock ICS Unsafe?
Yiannis75 said:
Stock GB kernel its safe and Stock ICS Unsafe?
Click to expand...
Click to collapse
Exactly.
I had this issue too when downgrading to GB. Wipe Cache and Dalvik and you should be ok from then on.
Wow. A lot of replies in just a single day. You guys are awesome
Now you say that the KK5 is non-wipe. Are there any GB-roms which are wipe, so to speak? Or do I have to do the flash to GB, enter recovery, wipe cache partition and do wipe/factory reset, then reboot into a now working phone, set up for root with USB and so forth, root and install CWM, copy the custom ROM to my SD-card (gonna go for ParanoidAndroid) as well as Google services if I want those, and then install them via CWM/Mobile Odin?
Godofmosquitos said:
Wow. A lot of replies in just a single day. You guys are awesome
Now you say that the KK5 is non-wipe. Are there any GB-roms which are wipe, so to speak? Or do I have to do the flash to GB, enter recovery, wipe cache partition and do wipe/factory reset, then reboot into a now working phone, set up for root with USB and so forth, root and install CWM, copy the custom ROM to my SD-card (gonna go for ParanoidAndroid) as well as Google services if I want those, and then install them via CWM/Mobile Odin?
Click to expand...
Click to collapse
GB LC1 is wipe. But if you want PA (which is an excellent choice) just flash a CM10 kernel in your recovery (if your recovery is safe, like GB for example). Then follow Utacka's instructions for the installation.
But if I want CWM I should do root and install CWM there? And then flash the custom ROM from CWM?
Godofmosquitos said:
But if I want CWM I should do root and install CWM there? And then flash the custom ROM from CWM?
Click to expand...
Click to collapse
The CM10 kernel comes with its own recovery where you can flash from. If you have root issues, just flash CWM-SuperSU-v0.99.zip. In any case don't flash from stock ICS with CMW.zip: if you are on ICS and not rooted flash the relevant Philz kernel (which is safe and will give you root and CWM) then the CM10 kernel.
Edit: what ROM do you have now?
I use the 4.1.2 XXLSA ROM
Btw, anyone knows where I can download the Google Services Framework so I can install it alongside Paranoid Android? I have been led to believe it's not included as per default
Thx for all the replies!!
If you have downloaded the xxlsa rom then it's inside the rom zip file. Path system/app/GoogleServicesFramework
nokiamodeln91 said:
If you have downloaded the xxlsa rom then it's inside the rom zip file. Path system/app/GoogleServicesFramework
Click to expand...
Click to collapse
Hmmm. not that I can see. Even tried unpacking the .tar files. Can't find it :/
Edit: Ah, found it Thx for all the help
hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
problitz said:
hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
Click to expand...
Click to collapse
First upgrade your device to Gingerbread using Odin, follow this guide
hubix's guide
Then root your device and install CWM (custom recovery) in order to flash custom roms, doing backups, flash mods ... here you'll find all
Usefull Thread with lots of info and FAQ
Finally choose the rom you want and follow the dev's instructions to flash the selected rom
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
problitz said:
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
Click to expand...
Click to collapse
The latest fw it's from Vietnam?? umm
There's no problem, but I suggest you to flash an European fw in order to avoid signal/coverage troubles because of each fw includes a modem from a different area. For me the Spanish KTM is the best
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
problitz said:
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
Click to expand...
Click to collapse
Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
You can find all the necessary details for flashing as well as all the firmwares in this link. If your PC cannot recognize the phone, its usually the drivers. Once installed, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace (just install these zip from the recovery mode),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
You can use the single firmware installation. No need to download files like boot, pda, etc separately. Also you can download the firmware near to your region. Hope I Helped
thx that help a lot just missing the firmware for portugal to be perfect
problitz said:
thx that help a lot just missing the firmware for portugal to be perfect
Click to expand...
Click to collapse
Glad I could help
SamMobile
problitz said:
Just missing the firmware for Portugal to be perfect
Click to expand...
Click to collapse
Download It From SamMobile.com :laugh::victory::highfive:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
problitz said:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
Click to expand...
Click to collapse
Before you do any of these things, make sure to backup you apps. Go to CWM and do "Wipe data/ factory reset" and "Wipe Cache partition". Also go to Mount and Storage> Format /system. Finally Advanced> "Wipe Dalvik Cache" and "Wipe Battery Stat". Now reinstall the rom again. It might solve the issue. As for the stable custom rom, you can always go with CM 7 i.e. Android 2.3.7 based roms. CM 7 based roms are much stable than CM 9, CM 10 and CM 11 roms. As per xda rules, I cannot suggest you the best rom. But here is list of all roms for our Ace. You can flash this yourself to decide which is the best. Here is the link,
Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST
Hope I Helped
i did that but still have the same problem i get a light blue screen and black and it just restarts i really liked this rom
i will try other thx anyway for the rom list
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
problitz said:
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
Click to expand...
Click to collapse
Once you have installed the stock rom, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur).
i did but still same problem
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
problitz said:
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
Click to expand...
Click to collapse
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i think i have done that already but im not sure my phone is charging i will download another stock rom to try it then i will post the results thx
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
problitz said:
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
Click to expand...
Click to collapse
Might be the problem with the custom rom. Try installing some other custom rom and see if the problem persists. Do post the result. Hope I Helped