hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
problitz said:
hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
Click to expand...
Click to collapse
First upgrade your device to Gingerbread using Odin, follow this guide
hubix's guide
Then root your device and install CWM (custom recovery) in order to flash custom roms, doing backups, flash mods ... here you'll find all
Usefull Thread with lots of info and FAQ
Finally choose the rom you want and follow the dev's instructions to flash the selected rom
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
problitz said:
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
Click to expand...
Click to collapse
The latest fw it's from Vietnam?? umm
There's no problem, but I suggest you to flash an European fw in order to avoid signal/coverage troubles because of each fw includes a modem from a different area. For me the Spanish KTM is the best
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
problitz said:
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
Click to expand...
Click to collapse
Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
You can find all the necessary details for flashing as well as all the firmwares in this link. If your PC cannot recognize the phone, its usually the drivers. Once installed, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace (just install these zip from the recovery mode),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
You can use the single firmware installation. No need to download files like boot, pda, etc separately. Also you can download the firmware near to your region. Hope I Helped
thx that help a lot just missing the firmware for portugal to be perfect
problitz said:
thx that help a lot just missing the firmware for portugal to be perfect
Click to expand...
Click to collapse
Glad I could help
SamMobile
problitz said:
Just missing the firmware for Portugal to be perfect
Click to expand...
Click to collapse
Download It From SamMobile.com :laugh::victory::highfive:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
problitz said:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
Click to expand...
Click to collapse
Before you do any of these things, make sure to backup you apps. Go to CWM and do "Wipe data/ factory reset" and "Wipe Cache partition". Also go to Mount and Storage> Format /system. Finally Advanced> "Wipe Dalvik Cache" and "Wipe Battery Stat". Now reinstall the rom again. It might solve the issue. As for the stable custom rom, you can always go with CM 7 i.e. Android 2.3.7 based roms. CM 7 based roms are much stable than CM 9, CM 10 and CM 11 roms. As per xda rules, I cannot suggest you the best rom. But here is list of all roms for our Ace. You can flash this yourself to decide which is the best. Here is the link,
Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST
Hope I Helped
i did that but still have the same problem i get a light blue screen and black and it just restarts i really liked this rom
i will try other thx anyway for the rom list
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
problitz said:
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
Click to expand...
Click to collapse
Once you have installed the stock rom, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur).
i did but still same problem
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
problitz said:
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
Click to expand...
Click to collapse
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i think i have done that already but im not sure my phone is charging i will download another stock rom to try it then i will post the results thx
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
problitz said:
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
Click to expand...
Click to collapse
Might be the problem with the custom rom. Try installing some other custom rom and see if the problem persists. Do post the result. Hope I Helped
Related
Apologies, but since I am a new user, I was not allowed to post in the thread in developer section.
I had bought a pre owned phone, on Rocket ROM (GB based), however as S-Pen apps were not working I decided to go on the stock ICS rooted way.
I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=1424997
I had downloaded the stock INdian ROM
N7000XXKK3 ------ 2.3.5 2011 November------ N7000ODDKK1 ------------------------India -------------------------Download
Click to expand...
Click to collapse
I followed the steps, downloaded Odin, and put the TAR file in PDA section, and flashed. All goes fine without error, on the phone it says everything is installed successfully. However after the process the phone just keeps restarting after the Samsung logo.
Have I done anything wrong here? How do I rectify the mistake and get my phone working
Did you clear cache/dalvik or do a wipe in recovery menu ? Looks like it's stuck because of leftover data from previous rom
Akiainavas said:
Did you clear cache/dalvik or do a wipe in recovery menu ? Looks like it's stuck because of leftover data from previous rom
Click to expand...
Click to collapse
Umm, pardon my ignorance as I am migrating from an ancient Nokia device.
No, I had done no such thing, no backups too as I just had it for a few days and no data so to speak of.
Should I be doing a wipe in recovery menu? And doesn't flashing the device, formats the memory too?
I think it should, but for some reasons it does not. To get rid of boot loop, go into recovery and clear cache. Should boot properly then
Also, avoid doing a factory reset on stock ics. If clearing cache wont help, i'd suggest flashing gb stock rom, doing a wipe and then upgrading to ics as wiping under ics has caused people a lot of troubles.
Yes you should do a wipe of cache memory and dalvik cache. That is availible from recovery menu. And no they arent allways formatted when flashing a new rom.
To go into recovery, do this.
Device off > vol-up+home+power. And now you are in recovery mode.
Also, avoid doing a factory reset on stock ics. If clearing cache wont help, i'd suggest flashing gb stock rom, doing a wipe and then upgrading to ics as wiping under ics has caused people a lot of troubles.
Click to expand...
Click to collapse
Thanks, I had read up how much ever I could, and am pretty wary of the emmc bug. Thats the reason I am flashing to a GB based stock rom, and then the ICS stock rom.
The error I got earlier is by flashing to a Indian GB Stock ROM, should I yet clear cache memory in the recovery mode?
A little bit of googling tells me I should be flashing to a ROM with multiple files (different ones for PDA, Modem, CSC etc) hence I am also downloading the stock Europe based ROM. Now the query is would the stock Europe GB ROM, cause any issues to a Note bought in India?
Edit: I wiped the cache partition in recovery mode, but the bootloop persists. I will try flashing to the Europe GB ROM and update.
Thanks, folks was able to install the Europe stock GB ROM, which I later flashed to an Indian stock ICS ROM. I have rooted the phone by a very helpful guide by Dr Ketan, however I miss some of the functions available to me on the rocket GB based ROM. Especially an option to have a data on/off option in quick notifications.
What is the purpose of rooting the stock ROM? Can I delete the bloatware that comes pre-installed on the stock ROM, once the phone is rooted? If yes how?
Any safe custom ICS ROM's you guys recommend? If I am right the correct way right now seems to be to flash a safe GB based ROM everytime before you flash an ICS ROM? Correct?
Last but not the least, thanks to the folks who replied and guided me in the thread, XDA is a very resourceful place, if you search it thoroughly.
About notification toggles - they are available in some roms, in others - not.
As far as rooting is concerned - yes, you can delete almost all the bloatware. There is a thread with APKs that are safe to remove - check it out and feel free to delete everything you won't be using. How ? Simple file explorer with root capabilities will do. Here's the list, thanks to pulser_g2:
https://spreadsheets.google.com/spr...1gdDJRekl4QmkyNmIzUmRvX2h3UDVkQXc&output=html
Safe custom ICS ROMs - I'd say go for CM9. For me, AOSP is the only way to go with Android. If you want TouchWiz based roms, however, can't really help cause i've never used them - there are plenty in development section though.
Nope, you don't need to flash GB ROM everytime. The problem with wipe affects only stock ICS roms ( so with stock-kernel based roms from Samsung, yeah, that's recommended ). But if you're going to flash/change/update roms like CM9, Criskelo etc. there is no need to go back to GB everytime.
Hi i was on ICS stunner and flash via PC Odin Stock GB rom.
everything goes ok but now i'm stuck on Samsung logo (bootloop)
i have to do cache/dalvik wip but i have only stock recovery.
Is there any way to do that on stock recovery or i have to flash a CWM instead ?
And if i have to so how to do that ?
help guys
arturutrata91 said:
Hi i was on ICS stunner and flash via PC Odin Stock GB rom.
everything goes ok but now i'm stuck on Samsung logo (bootloop)
i have to do cache/dalvik wip but i have only stock recovery.
Is there any way to do that on stock recovery or i have to flash a CWM instead ?
And if i have to so how to do that ?
help guys
Click to expand...
Click to collapse
Download abyss from the following site:
http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.tar
Flash the file with PC odin then reboot into abyss recovery. You can then do the wipe.
If you need more information, go to this website:
http://rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall/
hey guys,, i seem to have stuffed the recovery of my phone,, i stupidly installed cwm on my phone without root, but when i reflashed with odin the stock recovery works but when i install cwm, it doesnt go into recovery
CWM doesn't require root!
Try to reflash a stock rom. Not the one package file but the whole rom.
---------------XDA Premium--------------
Don't be a noob. Be a newbie..!!
Details here.
___________________________________
i have tried, once i flash cwm it doesnt boot into recovery,, ill try redownload and see if that helps
finally got it to work, i found a odin flashable cwm and it now works
ok now that i have cwm semi working on my phone, its now very difficult install roms, the only rom i can get to work on my phone now is stock,,, i now cannot flash cwm from recovery otherwise i get cwm bootloop only flashing by odin works, all custom roms get bootloop no matter how many times i flash and wipe data/cache,, i think my phone is stuffed
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
dxppxd said:
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
Click to expand...
Click to collapse
yeah mate im sure, i know what im doing, but it just doesnt seem to work anymore lol,, i have the T model
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
JDMBrooksy said:
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
Click to expand...
Click to collapse
yes it is, im not a noobie,, done that too,, im trying to flash cm9 b10 now but its stuck at samsung, and yes i have done data wipe and cache wipe
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
JDMBrooksy said:
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
Click to expand...
Click to collapse
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
winxuser said:
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
Click to expand...
Click to collapse
Flash "Root" After Flashing "CWM" See if that helps? if not please try the order i have gave, or try looking for different resources.
The Sources i have given you are working fine for my Ace.
Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
PhurionN said:
Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
Click to expand...
Click to collapse
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
BRKsays said:
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
Click to expand...
Click to collapse
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
PhurionN said:
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
Click to expand...
Click to collapse
i am having a similar problem .....i cant install any rom other than ultimatum
Magpir said:
i am having a similar problem .....i cant install any rom other than ultimatum
Click to expand...
Click to collapse
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
PhurionN said:
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
Click to expand...
Click to collapse
details please .....
Magpir said:
details please .....
Click to expand...
Click to collapse
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
PhurionN said:
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
Click to expand...
Click to collapse
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Magpir said:
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Click to expand...
Click to collapse
flash a stock firmware via odin then flash a custon rom after rooting and installing cwm, here is a tutorial, I hope this help you: http://forum.xda-developers.com/showthread.php?t=1034145
Hi guys,
while trying to flash OMNI ROM kikat i bricked my phone.
The phine doesnt go past recovery or download mode. Any zip file i try flash come up with an error. I got rid of the "status7" error but another error came up.
I troed installing various versions on CWM but still wont flash the Omni ROM i downloaded. I also ddnt back up the system before doing this.
Any assistance please?
khakhi said:
Hi guys,
while trying to flash OMNI ROM kikat i bricked my phone.
The phine doesnt go past recovery or download mode. Any zip file i try flash come up with an error. I got rid of the "status7" error but another error came up.
I troed installing various versions on CWM but still wont flash the Omni ROM i downloaded. I also ddnt back up the system before doing this.
Any assistance please?
Click to expand...
Click to collapse
Did u follow this ? Doesn't go past recovery nor download means? You can still access both mode? Worst comes to the worst just flash stock 4.1.2 Samsung Rom using Odin n follow the guide I attached.
Jackwu696 said:
Did u follow this ? Doesn't go past recovery nor download means? You can still access both mode? Worst comes to the worst just flash stock 4.1.2 Samsung Rom using Odin n follow the guide I attached.
Click to expand...
Click to collapse
Howsit bru, sorted....i managed to find a stock Kernerl that i flashed via ODIN...but i will follow ur instructions to flash the OMNI ROM which i have already downloaded and will flash it tonight. i will follow your steps clearly.
Thank you for your help
Howsit bru? i tried following your link to install OMNI ROM but i get an error when flashin Philz recovery. pls help
khakhi said:
Howsit bru? i tried following your link to install OMNI ROM but i get an error when flashin Philz recovery. pls help
Click to expand...
Click to collapse
Please tell me what rom were you on previousy before u had this problem. Can u boot to recovery? If you can, try flashing philz_touch_6.19.3-n7000.zip and reboot to recovery again. After that do all wipes: factory wipe reset n Yes I wanna flash a new rom superwiper. Then wipe dalvik cache. After that flash omnirom. If you still can't proceed, then I suggest you flash stock rom first to let your phone boot to system
Sent from my GT-N7000
Jackwu696 said:
Please tell me what rom were you on previousy before u had this problem. Can u boot to recovery? If you can, try flashing philz_touch_6.19.3-n7000.zip and reboot to recovery again. After that do all wipes: factory wipe reset n Yes I wanna flash a new rom superwiper. Then wipe dalvik cache. After that flash omnirom. If you still can't proceed, then I suggest you flash stock rom first to let your phone boot to system
Sent from my GT-N7000
Click to expand...
Click to collapse
Im back to the stock ROM 4.1.2 and phone is working fine bu t iwant to try the OMNI ROM
When i try flashing Philz recovery i get this error in recovery "Signature verification failed"
khakhi said:
Im back to the stock ROM 4.1.2 and phone is working fine bu t iwant to try the OMNI ROM
When i try flashing Philz recovery i get this error in recovery "Signature verification failed"
Click to expand...
Click to collapse
Ok. So I'll assume u r back to "0". So things to do will be :
1. Root and install custom recovery on your phone. I ALWAYS use older phils recovery + kernel such as PhilZ-cwm6-XXLTA-ATL-5.15.0-signed (XXLTA is based on my stock rom BUILD number. Download according to yours) This will give you root (superuser) & recovery installed.
2. After flashing phils, reboot to recovery by using 3 button combo n do ALL wipes the best being wipe factory + I want to install new rom super wiper + dalvik cache.
3. Flash my previous post mentioned phils advanced recovery ( I Always use that vers. N NO error whatsoever) reboot to recovery again n flash your omnirom.
4. DONE
Sent from my GT-N7000
Hi everybody,
just got an old yet effective SGS and I wanted root and get rid of touchwizz and all the crap from my carrier
I was unable to boot into DL mode, i tried everything, so I had to do it with adb reboot
I never had to use Odin to do my hacking with android so i'm not used to it but short story : I rename my rom.zip into rom rom.tar, it failed and all I have is this now :
https://www.dropbox.com/s/wk42jbmp33a3ftu/IMG_20140715_152917.jpg
Also I need to unsimlock, flashing a new rom will also do the trick right ?
thanks
What you just did is bricking your phone. It it was a zip file you need to install it from the recovery. Renaming it is not the way it works. I'm not sure if now you can fix it. Sorry, man
Sent from my GT-I9000 using XDA Premium 4 mobile app
Do you know what I can at least try?
If you can get into download mode:
Follow sections 2 and 3 in this guide.
If you can't:
Follow this guide and after that do what I sails to do if you have download mode.
Does 3-button-combo not work to get into the download mode?
(power & home & volume down)
tetakpatalked from Nexus 7 flo
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
@Idealith simlock has nothing to do with the firmware.
You need now any root kernel for that firmware, it has to be compatible with the intiframs of your 2.x version and it will give you a custom recovery.
There you can flash first CM10.2 to get the modified partition sizes and KK ready recovery and after that you can flash CM11
IMHO, the new Mackay ICS 2014 rom based on CM9 is a lot faster than any KitKat and works better on the i9000
tetakpatalked from N7100
my question about the rom still applies cause this one is awful
but with what does it have to do then ?
EDIT : my browser didn't render the end of your answer
I'm afraid i'm not following though :/
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Idealith said:
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Click to expand...
Click to collapse
Hey, could you tell me which country you are at? I could then take a few steps to help you
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Idealith said:
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Click to expand...
Click to collapse
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
tetakpatak said:
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Idealith said:
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Click to expand...
Click to collapse
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
tetakpatak said:
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
Click to expand...
Click to collapse
and how do i get that bootloader set up ?
Idealith said:
and how do i get that bootloader set up ?
Click to expand...
Click to collapse
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
tetakpatak said:
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
Click to expand...
Click to collapse
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Idealith said:
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Click to expand...
Click to collapse
Ask your carrier, I assume the phone contract isn't new anymore (or expired) so you'll get unlock code for free. Here in Europe one can obtain the unlock code after 2 years for free.
Otherwise you can ask one of the online unlock services, it costs usually around 15-20$ to get the code
tetakpatalked from N7100
Idealith said:
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
Click to expand...
Click to collapse
I'm glad that the JIG helped you (I know I'm late )
danielbe said:
I'm glad that the JIG helped you (I know I'm late )
Click to expand...
Click to collapse
yeah that worked like a charm
it was a good idea to buy it, i would have use the resistors so much
is there a more xda way to unlock it ? my carrier wants me to send the phone and have it unlock, they won't just provide the code :/