Hello fellas,
I am new to samsung and to be specific new to note but not new to android.
I got my note with stock ICS installed.I rooted my device using this method http://forum.xda-developers.com/showthread.php?t=1647148 it got successfully rooted.Then,I made a nandroid backup of my stock ICS with CWM.Then i was eager to flash custom ROM so,i flashed this MIUI ROM http://forum.xda-developers.com/showthread.php?t=1738632 , i also flashed required kernel for the ROM.Then i didn't liked the ROM so i thought of going back to stock ICS so,i opened CWM and restored my Stock ROM since then i am stuck at samsung boot animation.
I am from India so i downloaded indian Stock ROM [GB] n tried to flash it with PC Odin,it got successfully flashed but again it stuck on samsung boot animation.
NOW I AM STUCK!! PLZ HELP!!
If you have successfully flashed GB ROM then you are safe now
Just enter to recovery and wipe cache and data.
It shud boot normally then.
dr.ketan said:
If you have successfully flashed GB ROM then you are safe now
Just enter to recovery and wipe cache and data.
It shud boot normally then.
Click to expand...
Click to collapse
OMG! thank u it worked!
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?
Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)
rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo
Maybe you have a corrupted download. Check md5 sum to verify.
sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine
chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers
Hi all!
I'm going to flash CWM recovery on Samsung galaxy mini (stock 2.3.4) and I'd like to ask a couple of questions.
I'm going to follow this tutorial http://forum.xda-developers.com/showthread.php?t=1529863
Is it okay?
1. Do I have to root the device before flashing CWM with odin? Phone isn't rooted now, it's completely stock.
2. Can I install ANY custom rom with CWM? eg. CM9 or 10?
3. I want to make sure that if i want to install a custom rom, first I flash CWM with odin, then custom rom with CWM. Do i have to do something else?
I'm asking these questions because I don't want to brick my phone on my first time flashing something.. I want to be sure.
Answers
aamojj_ said:
Hi all!
I'm going to flash CWM recovery on Samsung galaxy mini (stock 2.3.4) and I'd like to ask a couple of questions.
I'm going to follow this tutorial http://forum.xda-developers.com/showthread.php?t=1529863
Is it okay?
1. Do I have to root the device before flashing CWM with odin? Phone isn't rooted now, it's completely stock.
2. Can I install ANY custom rom with CWM? eg. CM9 or 10?
3. I want to make sure that if i want to install a custom rom, first I flash CWM with odin, then custom rom with CWM. Do i have to do something else?
I'm asking these questions because I don't want to brick my phone on my first time flashing something.. I want to be sure.
Click to expand...
Click to collapse
Better to root the phone before installing clockwork mod
once clockwork mod is install u can install any custom rom just u need to download that rom put it sd card and follow the tutorial given below each rom (most of them have Same tutorial)
u need to flash through odin only once just to root or else when u phone gets bricked
rupesh1718 said:
Better to root the phone before installing clockwork mod
once clockwork mod is install u can install any custom rom just u need to download that rom put it sd card and follow the tutorial given below each rom (most of them have Same tutorial)
u need to flash through odin only once just to root or else when u phone gets bricked
Click to expand...
Click to collapse
Okay, thanks very much for your help!
if you want to be on stock then root first before flashing CWM as after flashing CWM you may not be able to root your phone.
If you want to flash custom rom then there's no need to root your phone.
Just boot into cwm wipe data
flash rom
again wipe data and then reboot
remember that wiping data is needed before and after the flashing process.
Ok, I'm going to flash CWM tomorrow
Thanks for help!
E: Succesfully installed CWM on my SGM!!
Enjoy and play more with your rom
Sent from my GT-S5570 using xda app-developers app
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
shyam9876 said:
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
Click to expand...
Click to collapse
Hi,
Try reverting back to CWM 5. As far as i know, CWM 6 was made only with the intention of flashing Android 4.4 Kit Kat builds. Do post your result. You can find the CWM 5 link below. Hope I helped
CWM 5.0.2.6 fix for Galaxy Ace S5830
hello first off all ive rooted and installed custom roms on s3 gti9300 and s4 gt i9500 but this n7000 is a bit confusing so i rooted via odin and installed philz 5 custom recovery but when i install rom i get error 7 and have to flash back to stock 4.1.2 and also do i need to use external sd card for custom roms with n7000 as didnt with s3/4 ... any help would be great as really great as stock rom is slow as hell
02hudsond said:
hello first off all ive rooted and installed custom roms on s3 gti9300 and s4 gt i9500 but this n7000 is a bit confusing so i rooted via odin and installed philz 5 custom recovery but when i install rom i get error 7 and have to flash back to stock 4.1.2 and also do i need to use external sd card for custom roms with n7000 as didnt with s3/4 ... any help would be great as really great as stock rom is slow as hell
Click to expand...
Click to collapse
error 7 happens when your kernel/recovery does not support your rom. Use philz to enter recovery and install a raw kernel from here. Choose the appropriate kernel and flash it, reboot into recovery and you're ready to flash the rom.
AutumQueen92 said:
error 7 happens when your kernel/recovery does not support your rom. Use philz to enter recovery and install a raw kernel from here. Choose the appropriate kernel and flash it, reboot into recovery and you're ready to flash the rom.
Click to expand...
Click to collapse
witch do i download :L.. my phone wont boot it just restarts in to team win recovery project now so cant get in to philz recovery //// have i got to flash back to stock an re do all this again
AutumQueen92 said:
error 7 happens when your kernel/recovery does not support your rom. Use philz to enter recovery and install a raw kernel from here. Choose the appropriate kernel and flash it, reboot into recovery and you're ready to flash the rom.
Click to expand...
Click to collapse
just an update i may have done it its installed rom and its optimizing apps