hello first off all ive rooted and installed custom roms on s3 gti9300 and s4 gt i9500 but this n7000 is a bit confusing so i rooted via odin and installed philz 5 custom recovery but when i install rom i get error 7 and have to flash back to stock 4.1.2 and also do i need to use external sd card for custom roms with n7000 as didnt with s3/4 ... any help would be great as really great as stock rom is slow as hell
02hudsond said:
hello first off all ive rooted and installed custom roms on s3 gti9300 and s4 gt i9500 but this n7000 is a bit confusing so i rooted via odin and installed philz 5 custom recovery but when i install rom i get error 7 and have to flash back to stock 4.1.2 and also do i need to use external sd card for custom roms with n7000 as didnt with s3/4 ... any help would be great as really great as stock rom is slow as hell
Click to expand...
Click to collapse
error 7 happens when your kernel/recovery does not support your rom. Use philz to enter recovery and install a raw kernel from here. Choose the appropriate kernel and flash it, reboot into recovery and you're ready to flash the rom.
AutumQueen92 said:
error 7 happens when your kernel/recovery does not support your rom. Use philz to enter recovery and install a raw kernel from here. Choose the appropriate kernel and flash it, reboot into recovery and you're ready to flash the rom.
Click to expand...
Click to collapse
witch do i download :L.. my phone wont boot it just restarts in to team win recovery project now so cant get in to philz recovery //// have i got to flash back to stock an re do all this again
AutumQueen92 said:
error 7 happens when your kernel/recovery does not support your rom. Use philz to enter recovery and install a raw kernel from here. Choose the appropriate kernel and flash it, reboot into recovery and you're ready to flash the rom.
Click to expand...
Click to collapse
just an update i may have done it its installed rom and its optimizing apps
Related
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
You will always have that problem coz the ROMs you flashed requires GB. so go flash GB first before you install CWM and custom ROMs..
thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
it should be 2.3.4 before you installing CWM
HERE IS WHAT YOU NEED:
1. YOU NEED TO FLASH YOUR PHONE TO GINGERBREAD 2.3.4
2. AFTER FLASHING STOCK ROM, ROOT IT!
3. INSTALL CLOCK WORK MOD
In this part, it is now the installation of your CUSTOM MADE ROM
1. Wipe Dalvick Cache
2. Wipe Data/Reset
3. Wipe Cache
4. Install Zip from sd card then locate the zip file
5. YOUR GOOD TO GO!
BTW: Always wait for the rom to load, it may take awhile to load if it is installed for the first time
Like If this helped you THANKS
What's your model number? ?
You need to flash GB-
Using Odin multi downloader+tass and also need CWM(for flash CM)...
Sent from my GT-S5570 using XDA
Thanks buddies...but already found a way out now my phone is working.
hey fellow android user. i just recently updated my semaphore kernel to 2.1.1 now it wont boor into the os. what should i do to reverse the proces or how can i acces my sdcard so i can tranfer the old kernel in cwm mode.
pls helppppppppppppppp
We need more infos. What ROM are you currently using? (ROM=OS)
Can you access recovery and download mode?
BlueFlame4 said:
We need more infos. What ROM are you currently using? (ROM=OS)
Can you access recovery and download mode?
Click to expand...
Click to collapse
phone samsung galaxy s gt-i9000, rom is c-rom bean v1.6.5. i can access recovery and download mode.
2.1.1 (18/09/2012)
[...]
Please make sure that your ROM is compatible with this patch (CM10 - 20120917 or later)
Is your ROM compatible? If not, use 2.1.0 or another kernel.
Just jump into recovery and restore backup. You did take a backup, didn't you??
GT-I9000 / SEMA / SLIMBEAN2.3
Flash 2.1.0 via Odin and next time, read what Stratosk writes.
after a long struggle i got out. had to use odin and reflash gb. then i put ics the jb. now my phone works perfect
2.1.0 via Odin would have been enough but anyways.
shamank1ng said:
phone samsung galaxy s gt-i9000, rom is c-rom bean v1.6.5. i can access recovery and download mode.
Click to expand...
Click to collapse
Install your roms zip file again... on first install it might install only cwm... Install again & you will get get your old OS again,,
well , i had CWM 5 and i used to flash a lot of roms through it , someday i flashed a rom and cwm 5 turned to cwm 4
later i found a kitkat rom and i had to fladh cwm 6 for ace to install it , i flashed the recovery then i couldn't flash any rom with it , i flashed twrp recovery and still can't flash roms
i think E: error executing updater binary or something
please help i want to flash a good rom
Install CWM 5 and try to flash a new ROM to verify if the process works fine.
[TUTORIAL] HOW TO GO BACK FROM CWM 6.x TO CWM 5.x
yazidnouari said:
well , i had CWM 5 and i used to flash a lot of roms through it , someday i flashed a rom and cwm 5 turned to cwm 4
later i found a kitkat rom and i had to fladh cwm 6 for ace to install it , i flashed the recovery then i couldn't flash any rom with it , i flashed twrp recovery and still can't flash roms
i think E: error executing updater binary or something
please help i want to flash a good rom
Click to expand...
Click to collapse
I also had this problem.
Try to find a solution here: http://forum.xda-developers.com/showthread.php?t=2781240
I wish you success !
yazidnouari said:
well , i had CWM 5 and i used to flash a lot of roms through it , someday i flashed a rom and cwm 5 turned to cwm 4
later i found a kitkat rom and i had to fladh cwm 6 for ace to install it , i flashed the recovery then i couldn't flash any rom with it , i flashed twrp recovery and still can't flash roms
i think E: error executing updater binary or something
please help i want to flash a good rom
Click to expand...
Click to collapse
And now... what's your status? can you boot into recovery?
hey there, i want to install lollipop 5.1.1 on my galaxy note 1 n7000 4.1.2 but when i am trying to flash the cwm from my android system recovery 3e it gives me signature verification failed then i tried to flash the philz touch through odin and did not work. please help me i had been trying for almost 4 hours
Always the same problem. Flash first a PhilZ kernel to get a advanced recovery. Then flash correct kernel for newer Roms like 5.1.x. Normally all written in the Rom thread.
user_99 said:
always the same problem. Flash first a philz kernel to get a advanced recovery. Then flash correct kernel for newer roms like 5.1.x. Normally all written in the rom thread.
Click to expand...
Click to collapse
thxs very much my friend but i want to ask what is better resurrection remix or paranoid
But that was not the question if I read your first post.
Anwser: Best try it out by yourself
Hi all!
I flashed my recovery to TWRP and ever since then, I always get stuck in bootloop no matter what custom ROM I try. Flashing back to stock rom via ODIN works.
It's been a while since I've tinkered with custom ROMs so I may be missing something. Any ideas on where to start?
joshbeoulve said:
Hi all!
I flashed my recovery to TWRP and ever since then, I always get stuck in bootloop no matter what custom ROM I try. Flashing back to stock rom via ODIN works.
It's been a while since I've tinkered with custom ROMs so I may be missing something. Any ideas on where to start?
Click to expand...
Click to collapse
Hi,
Which phone ? i9305 or i9300 ?
Which version of TWRP do you use ?
You should try latest version of TWRP (2.8.7.3).
Or try Philz touch Recovery 6.48.4 or 6.59.
1.Repeat ODIN step to stock rom
2.Root the phone by kingroot (as it's doesn't required pc)
3.After rooting, Download Cwm rom manager
4.Install Cwm by selecting your phone model and etc
5.flash it directly from the apps
6.now you can flash any rom ( please backup your system for your safety)