does anyone know of a way to remove a small scratch on my screen .its very faint but annoying .
any ideas ?
Related
I cut / creased the touch screen layer, the "glass" image is fine...but don't want to ditch the device just ecause the stylus functionality goes a little haywire sometimes. Anyone know who could fix it?
Hi
can anybody tell me how to resolve that problem ??
Unfortunately I had the habbit of keeping my phone in my jeans butt pocket, even when I switched to Diamond touch screened phone I kept doing that, but I realized that the screen got some slight concavity on it that even reflects as irregular pattern of colors seen only when screen switched off or when on but from a sharp viewing angle.
How to correct that ??? any ideas ???
Thanks
Replace the screen.
Change phone carrying habits.
It is a hardware issue, so not easy to fix. Beware that the screen is multi layered (touch screen) so it is possible that any physical shape alterations will seriously change the way it works. It happens that screens go weird when there's dust & debris between screen and the outside body of the phone...
Thanks for your reply
Is it worth it to replace the screen ?? or maybe its better off selling it for less cash then buy another one ?
I have noticed that there is a matrix of visible small dots 2 mm apart from each other, I guess this is the touch-sensing system.
Yeah, the touch-sensitive layer got squished. It should still work fine for now, but over time the touch sensitivity may get worse. The only way to fix it is to get it replaced. If it's still under warranty you should replace it that way, better than selling and buying a completely new Diamond. If not, you can replace it yourself with this: http://mobile.brando.com.hk/prod_detail.php?prod_id=03449&dept_id=088&cat_id=0695
Thanks fhsieh for the info and link.
I will replace it when it fails eventually, now I am releaved and I know that I've got a solution
Hi All,
When I bought the phone it was enveloped with a sticking transparent cover (as the ones you find on new phones, at least here) and the sticker on the screen has the samsung logo and Wifi/GPS and stuff like that written on it. The thing is, when open the market or scroll down the notification, I can see the residue of those words and markings imprinted, granted it is hard to spot but very annoying.
I have been trying to capture a photo with my camera but didn't succeed so far. Anyone had this problem before? or any ideas? is it a permanent damage to the screen or those are residues that can be removed?
Haven't noticed anything like that, but I suggest you try to clean your screen.
For cleaning I used a PC LCD screen cleaning solution, spraying it on a soft, clean paper towel and rubbing the screen lightly with it, taking care not to let any liquid in the phone speaker holes or the home button. Afterwards wipe the liquid with a clean, soft, dry paper towel. Makes my screen shiny and clean as new.
If cleaning doesn't work, I suggest you get it replaced.
Ok I've managed to finally take a picture that shows what I am talking about. The white note shows the exact covers that was on my phone.
Notice the HD Amoled and the circle around it? that's the one I can still see when the screen is showing colors same as the one in the picture. I can also see (but couldn't take picture of) the words GPS, the Wifi logo and a circle (android logo) in the bottom.
any ideas? is that permanent? is there a way to remove it? people don't notice it on my phone, but since I know it is there, it's becoming more and more annoying
I didn't have those stickers on my phone...
Sent from my superior GT-N7000 using Tapatalk
Hi
I'm having the same problem. Did you get this fixed?
Changed phone screen , so after that screen coes black when i call and cant do ****, i think sensor is kinda buggued. When i take screen off and move finger, 5cm far from sensor it works, but when i move my finger in 2 cm far from sensor it wont work. I have no clue , hard ware of software problem.
Find proximity windows on new touch screen and paint it with black marker from inside. If it doesn't help scrape all painting from this small window to make it completely transparent and then again paint it without leaving any spot transparent. Permanent marker You can clean with some alcohol, don't use any solvent cause it can damage rest of digitizer paint.
Some year ago I had whole part like this, 15 or more screens where I had to scrape this window from painting and again paint it with black marker because factory paint was to dark and light couldn't come in. But in Your case before You scrape it first paint it cause Your can be too bright and if it doesn't help then scrape and paint.
Antoonio said:
Changed phone screen , so after that screen coes black when i call and cant do ****, i think sensor is kinda buggued. When i take screen off and move finger, 5cm far from sensor it works, but when i move my finger in 2 cm far from sensor it wont work. I have no clue , hard ware of software problem.
Click to expand...
Click to collapse
Well the best thing to do, is first determine whether the problem is a Software or a Hardware problem.
1) Factory Reset the device, if the problem persists, flash the firmware of your device via Flashtool ( BACK UP YOUR DATA FIRST ).
If the problem with the sensor still exists...
It's most likely a hardware issue and the best course of action would be to send it to Sony and hope it is covered by warranty, either way it won't be expensive to replace compared to a broken digitizer or something.
Revontheus said:
Well the best thing to do, is first determine whether the problem is a Software or a Hardware problem.
1) Factory Reset the device, if the problem persists, flash the firmware of your device via Flashtool ( BACK UP YOUR DATA FIRST ).
If the problem with the sensor still exists...
It's most likely a hardware issue and the best course of action would be to send it to Sony and hope it is covered by warranty, either way it won't be expensive to replace compared to a broken digitizer or something.
Click to expand...
Click to collapse
He changed screen, this phone is no more under warranty.
Painted it black, scratched it off and it worked, thanks a lot
Hello. I need a help about my nexus 6 if someone understand its inner components .
I replaced the screen and after that everything works well except serverals screen flickerings and artefacts which appears randomly, not very often, especially on in cold temperature or if I bend or touch the phone harder. After flickering screen stays black and I'm forced to press hard right upper corner of the phone or bend it a little bit to get it back to work. I think there must be some flex cable maybe not well fixed, can you please help me which one can make this issue? Or could it be something else? Maybe whole new LCD part defective? On which part of the phone should I focus if I will disassemble it again?
Thank you very much.