Database Develop

Adding home (non-roaming) network

I live in Canada and have a Fido SIM card. When Rogers and Fido merged, the old Fido network ID (302-370) was made defunct so that the only GSM network available is the Rogers one (302-720).
As I am a Fido customer, it means that my Kaiser believes that it is always roaming as 302-370 is my home network and I can't use the roaming-based data rules to manage my data charges when I'm truly roaming.
Is there a way to add 302-720 as a "home network" as far as the Kaiser is concerned? Is this defined in the registry or in the ROM?
I am currently using the stock HTC ROM.
Thanks.

Its defined on the Sim card, just call Rogers and tell them what happened, and Im sure that they'll send you a new card with 302-720 as a home network.
Otherwise, I dont wanna be a Canadian Idiot! (LOL at Wierd Al for his song...)
Eh?

I've been in touch with both the regular customer service people and their "network people". They are either unable or unwilling to make that change for me. It is possible that they use the SIM's home network as a key to decide which back-end database they reference. Although they merged the two GSM networks, they still operate as two separate companies (apart from the price collusion, of course).
Yesterday, I even bought a new latest-generation SIM card to replace my ancient one thinking that it may fix the problem. No luck - it still uses the Fido network id.
So, as the SIM card is stuck the way it is, I need a way to override my Kaiser's opinion that the Rogers network is a roaming one.

I have a really similar problem, plus another one which might be related.
I am in the UK and on the "Three" network, they are mainly a 3G network and i'm not sure but they might not have 'any' 2G transmitters. So when I have 3G coverage there is no roaming icon and everything works fine.
If however I am in a 2G area and using their roaming partner (not sure who yet, possibly Orange) the GPRS will not work unless I go in and tell the phone to search for a network automatically then make a connection straight away. It says there is GPRS signal and connects but I can't actually transfer any data. The GSM standard phone calls and TXT messages work fine without doing that.
If anyone does have an answer on how to add additional home networks I would be gratefull to know too.

I have the same problem with Fido; however, when I put my SIM into a Samsung Jack flashed with Fido ROM, the roaming problem is gone. The Samsung Jack was from Rogers. This leads me to believe that the roaming is somehow set by the ROM.

I don't believe there is anyway you are going to be able to make the Rogers network not think you are a Rogers customer through a registry hack.
Maybe you can find a work around by using those dialing rules?
And the only real fix is to bite the bullet and switch over to a Rogers contract.

Switching over to Rogers will resolve the roaming issue and will finally be rid of the text from 18 for voicemail; however, I don't want to lose my old City Fido plan.

i also face same problem any solution guy's ?

Reward $125 : Trick Diamond into thinking that it is not roaming

I have the Diamond from the Rogers network in Canada. It is SIM unlocked and constantly flashed with a variety of different ROMs. I am on the Fido network in Canada, which was purchased by the Rogers network. Ever since Rogers bought Fido, every phone I put my SIM in shows roaming.
Fido has been no help in solving the roaming problem. I have gone through this and many forums and have not found a solution to this problem.
Many individuals have claimed that this is not possible and that it is defined by the network; however, I think the Windows Mobile OS can be tricked to thinking that it is on the home network, due to the following: I have a Samsung SGH-i616 originally from the Rogers network. I have SIM unlocked it and flashed it with the Fido Windows Mobile 6.1 ROM. This phone does not show that it is roaming. Everything works like it is on the home network for this phone.
I am willing to give US$100 to whoever could make a CAB or something that will trick the phone into thinking that it is not roaming. The fix should not just hide the roaming icon. It should make the phone work as if it was on a home network.
Who is willing to solve this problem and claim the fabulous reward???

Everyone that uses an HTC device with Fido suffers from this problem. I know that people on the Telfort network suffer from this roaming problem too. Surely, I am not the only one that has been severely annoyed by this right?

Dude, have a look here http://forum.xda-developers.com/showthread.php?t=503131&highlight=roaming see if that helps.

Thanks for the tip. Have looked into the thread before. Does not offer any help in defining a network as a home network.

If it helps in fixing my problem, all the files on my Samsung i616 (RILGSM.Dll files and such) are at their disposal.

try this (just throwing it out there)
hklm\software\microsoft\mds\cebits\roaming and set it to zero
i see some other registry settings but they do not look like they could be applicable.

Didn't have a registry entry there. Created a new dword called Roaming with value of 0. Rebooted my phone. Still the same. Roaming

Have you tried that other app No Data mentioned in that previous post?

Tried the No Data app. Does not trick phone into thinking it is not roaming. It disables data when roaming. Since my phone thinks it is roaming all the time, it successfully turns off data in my home network.

hameedx said:
I have the Diamond from the Rogers network in Canada. It is SIM unlocked and constantly flashed with a variety of different ROMs. I am on the Fido network in Canada, which was purchased by the Rogers network. Ever since Rogers bought Fido, every phone I put my SIM in shows roaming.
Fido has been no help in solving the roaming problem. I have gone through this and many forums and have not found a solution to this problem.
Many individuals have claimed that this is not possible and that it is defined by the network; however, I think the Windows Mobile OS can be tricked to thinking that it is on the home network, due to the following: I have a Samsung SGH-i616 originally from the Rogers network. I have SIM unlocked it and flashed it with the Fido Windows Mobile 6.1 update. This phone does not show that it is roaming. Everything works like it is on the home network for this phone.
I am willing to give US$100 to whoever could make a CAB or something that will trick the phone into thinking that it is not roaming. The fix should not just hide the roaming icon. It should make the phone work as if it was on a home network.
Who is willing to solve this problem and claim the fabulous reward???
Click to expand...
Click to collapse
How would you like to pay ?
WU or Paypall !!!

If you are able to solve my problem, I will pay you in any method you prefer. PayPal or Western Union is fine by me. Heck, I'll even put dollar bills in an envelope and post it to you if you prefer

A friend of mine is suffering from the same problem and is willing to give $25 to have the problem solved. So the reward is now $125.
If anyone else is having this problem, please put forward your pledge so that an enterprising developer can fix this issue and claim the large bounty.

I was looking for the EXACT same thing and I guess it means there's no solution?
Like you, I'm a Fido customer using a Rogers smartphone (Touch) and it always shows I'm roaming ... some programs can get around it, others cannot, and I get asked "Do you want to enable data connection when roaming? It may cost you." every time.

I'm also having the same problem. It's quite common in Norway, where a couple of big companies own the networks and the other providers "roam" in their network. Annoying.

Maybe you should contact Rogers to get a SIM card of them? Since Rogers bought Fido, so maybe you should get a Rogers card?

I am also having a roaming issue. I have nation wide coverage but when I get out of the state of Wisconsin, I start roaming. I get warnings about I am roaming and additional charges may apply when I open, send, or receive on email, internet, youtube, facebook ... pretty much anything data. I have an unlimited data plan so this shouldn't be an issue? I have nation wide coverage...
Gah! How to disable these warnings? Some adv. config / tweak program or registry edit?

Cybot12999 said:
Maybe you should contact Rogers to get a SIM card of them? Since Rogers bought Fido, so maybe you should get a Rogers card?
Click to expand...
Click to collapse
Can't put a Rogers SIM on the Fido network. Will get a validation error.

Does anybody have any input on how to get this issue fixed. I am very close to canceling my contract with my carrier over this problem

Same Trouble here in Montreal with my Rogers Diamond Phone (unlocked) and SIM fido.
ALWAYS ROAMING Grrrr
And I can't setup e-mail correctly and no home network to!
KaNiMziE

I also have recently activated an HTC Diamond on Fido, and constantly have the roaming icon above. It doesn't really bother me at all, however, I am just concerned about actual roaming charged. Roaming should be defined by the cell towers, correct? So, even though it displays a roaming icon, I am not really roaming at home, and therefore, will not be charged. Could anyone confirm?

Kaiser on Fido (Canada) & roaming

Hello all,
I have searched these forums high and low, but could not find a solution to my problem. I have a Kaiser which I use on the Canadian provider Fido. Since late 2004, Fido is a wholly owned subsidiary of Rogers, another Canadian wireless provider. Fido and Rogers now share one same network: Rogers'. My problem is that my Kaiser, having a Fido SIM in it, seems to always think it is roaming because it is connecting to the Rogers network. This causes me a problem since I cannot tell my phone to only download when on my home network, otherwise I would never be able to download anything (since I am always roaming). If I tell my phone to download even when roaming, I cannot control my usage when I actually am roaming in another country. I know there must be some kind of setting somewhere that I can adjust to make my phone think it is not roaming while connected to Rogers' network, I just don't know what it is. No matter what ROM I try, I can't get rid of that pesky "roaming triangle"! My gf's phone, a Samsung Jack, does not think it is forever roaming, so I know it is possible.
Does anyone have any insight on this?
Thanks in advance!
Dom

Hello there.
I have used my kaiser with Saudi Sim card, Lebanese Sim card, Jordanian Sim card and now FIDO sim card. Ive always had this triangle and has never affected my data plan.

bteljuice said:
Hello there.
I have used my kaiser with Saudi Sim card, Lebanese Sim card, Jordanian Sim card and now FIDO sim card. Ive always had this triangle and has never affected my data plan.
Click to expand...
Click to collapse
Me too, I even had my roaming turned off by Fido for some time and the triangle was still there.

Thanks for the input, guys. I know that the roaming icon will not prevent me from accessing 3G data. What it does prevent me from doing, though, is differentiating between "real" roaming (i.e. in another country) and "fake" roaming (i.e. on the Rogers network). As it stands, all settings which can be set to "use 3G data only when not roaming" are ineffective as I would never be able to download anything if they were enabled.
I hope that clears things up. And I hope that someone smarter than I am has a solution for this problem.
Thanks again!

Hello, I have the exact same phone on the exact same fido network and have the roaming triangle as well. It does not affect your data/voice plan at all. (ie. if you are in the Canada, you will not be charged for roaming). This is all explained in the following link:
http://howardforums.com/showthread.php?t=837503
Essentially the gist of it is that you are "roaming" on the rogers network, but since they are the same company, it doesn't matter or affect any of your plans. I have used my 6GB data plan from Fido with no extra charges.
It does effect some programs that do provide options for disabling web traffic when roaming (ie. hotmail push e-mail from windows live) as these programs will always think you are on another network.
What I have done is, predominantly, I use my wifi connection where available and have turned off all the "disabling traffic when roaming" options in various apps. Then in the fido internet (3G;GPRS) settings, I did not include the password. What this does is that when I connect to the internet without wifi it asks me for my password which I then enter to connect. Definitely mildly inconvenient, but prevents me from 'accidentally' connecting to the internet when in the US.

Thanks ibhimani.
I have taken similar measures to prevent roaming fees, but I use MoDaCo's NODATA app, instead. Basically, it allows me to completely turn off all cellular data connections (WiFi remains intact) while I am away.
Still, I don't think this is a real solution; it is a workaround at best. I know there is a way to force the phone to recognize the Rogers network as a "Home" network since my gf's Samsung Jack does not claim to be roaming at all times. I will try to look through the registry on the Jack to see if there is some setting I can tweak to achieve the desired effect. I'll let you all know if I find something.

That would be great. Thanks in advance.

No luck!
Hi all,
After a little research in the registry of my gf's Samsung Jack, I've found that the way the network is handled on it is different than on our HTC. The Samsung uses something called MITSMan.exe (Mobile Intelligent Terminal by Samsung Manager) which can identify the network correctly on her phone, but not on ours. Unfortunately, this is not reusable for us. The search continues. Hopefully, a WinMo HTC device will launch on Fido sometime soon so I can reuse something from it.
If I find anything else, I'll post it here.

I have a Nokia e62 and the Samsung Jack from Fido. Both these phones do not show the roaming icon. Must be some sort of custom firmware brewed for Fido by the manufacturers.
BTW - I am now using a Samsung Omnia II. This shows roaming too.

hameedx said:
I have a Nokia e62 and the Samsung Jack from Fido. Both these phones do not show the roaming icon. Must be some sort of custom firmware brewed for Fido by the manufacturers.
BTW - I am now using a Samsung Omnia II. This shows roaming too.
Click to expand...
Click to collapse
Hi hameedx,
With a Samsung Omnia II, you may be able to make a change to the registry to make it think you're on the home network, if it works like the Samsung Jack. On your Jack, search through the registry for something called MITSman. There should be a value corresponding to Fido's carrier code (MNC-MCC), which is 302-370 (or 302-720, which is Rogers'). It may actually be easier to search for these values. If the Omnia also uses MITSman, then you might be able to make the registry entries on it look like the ones on the Jack. If you need more detail about the registry entries, I could get them when I have access to a Jack again.

I searched the Jack's registry for anything with 302 720 370 72 37. Couldn't find any meaningful entry. Perhaps it is a DLL that we need to replace?

I believe that the Fido Samsung Jack has roaming indicator disabled completely. I used a Telus SIM in the Jack and does not show roaming. The Telus SIM shows roaming when I put it in other unlocked phones.

[Q] Japan Networks

Hi all I recently purchase this device and thought i did all the research but I tried to use the device on AU KDDI network today with no luck, so i am wondering what network will it work on in japan. NTT Docomo and Softbank are really the only two options left but I still have a year on a 2 year contact with AU. Any help please, thanks

It's quite complicated to use non Japanese phones on Japanese networks. You have to enter the correct APN settings etc.
Only for softbank it's easy. Get a smartphone unlimited plan, give in their non-softbank phone apn (plus.softbank; user: plus; Pass: softbank) and enjoy your phone.
If you use Docomo you have to go register you phone's IMEI on their network in store. Then they'll also make you pay the most expensive tethering unlimited plan (around 8000yen/80euro/month). They prefer not to allow non-Japanese phones on their networks, so they might just say no.
For AU, I have absolutely no idea. Contact your AU shop. Be very careful to use your phone without the correct settings, because they will charge you insane amounts of money to use mobile data. And when I say insane, I mean bat**** insane... I've used 400.000yen / 4000euro worth of data in 2 weeks time. If not for my unlimited plan and correct settings, I'd be bankrupted. There are quite a lot of stories of foreigners getting screwed from all sides by Japanese providers because they used the wrong settings. Again, be very careful

[Q] unlock phone but no internet data (LTE or 4G

Hi im new to the forum my question is my brother just give his glfex phone he was with Rogers (brand) and i unlock the phone with (unlock river.com site it cost me 13$ to convert it with Fido brand. So I put my old sim card in it of my old xperia sp and every thing seems to work exept my network data ... so no internet at all exept wi-fi, i check every thing in the phone the only thing i didn't do is call Fido thank you all

You won't get data unless you set up your network APN, Settings - Networks - Tethering & Networks - Mobile Networks.
Regards

Paid $1.50 us on ebay 2 nights ago had code in 30 mins, had to change apn and all worked well.Change the apn and you should be all set.