i have in my car Built in motorola bluetooth speaker
in my old phones like android / iphone i was can edit the setting that the phone will connect only to phone mode
but in wp8 this connect to phone mode and also to media mode
the media mode cancel the notification sounds
also i have 1 more bluetooth device in the car (the car stereo)
i want to connect to device that will works together: 1 to phone mode and the other to media mode
pls help me with this.
regards
david
Turn on speech in bluetooth device(from phone settings under speech) and you have the best notification system ever.
Related
i want to report an issue/bug that i've encountered yesterday when i purchased jabra bt620s bluetooth headset for listening music and making phone calls with my magic with ION rom.
when i connect the paired headset with the bluetooth enabled from before, the device only connects for a few seconds in MEDIA AUDIO mode, then remains only in phone audio mode, i have to disable and reenable the bluetooth on the magic to full connect the headset. annoying.
inf instead i enable the bluetooth on the device after that i've powered the headset on, the connection is full from the beginning....
result: i cannot let the bluetooth on in my magic.. because it's useless... i have to go then in preferences, wireless, bluetooth settings, ecc, ecc anyway =(
anyone with this problem?!?!
do you thik this is an ION ROM problem or bug?!?
try holding down the tap on the device in bt settings. then select to connect to media only. this works with my G1.
Hello,
I'm totally new in this area (android). I have a Galaxy s for a week now, and I am generally very impressed by the phone. There are two strange (or even stupid?) things about the phone:
1. I used to have a Nokia 6500 (it is not even symbian 60, it's 40). There is a menu called "enhacement" where you can adjust what calling profile will be activated when a headset, handsfree etc is connected. For example, when I connected the (nokia) phone to the bluetooth car handsfree the phone would recognize that a activate the "car" profile which I had created. The car profile in my case had a specific (quiet) ringtone (that was transmitted to the car's speaker) and had the phone vibration disabled.
Questions: Is there a way to create calling profiles AND that the phone activates a specific profile when connected to the car's bluetooth handsfree?
Is there a way to transmit the phone's ringtone to the car's speakers??
2. The second strange issue is that if I set an alarm and switch the phone off, the alarm will not be activated at alll!! The alarm only works as long as the phone is activated!!!
Thanx in advance
I find the following app very good to quickly connect to multiple headsets/speakers
https://play.google.com/store/apps/details?id=com.sflab.bluetooth
ie. @ home i have a D200 creative speaker
instead of going into bluetooth settings.. just click the widget and its connected!
Cons: sometimes the widget does not respond.. but give it some time.
Updated Version of above:
One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I think the answer lies in the question here,, Parrot Bluetooth Media Connection.
The stereo isn't 'smart' enough to determine that what is connecting to it is a Phone/MP3 and as such you wont be able to split the audio to have the phone play music and the Stereo take calls, it'll end up being one over the other.
One way around this would be to test with a completely different Bluetooth Headset to see if this allows music to be played on the Device and Calls to come through on the Headset,, failing that its going to have to be a potential dev jobby to split how the device sends its audio and to what specific device,,, if that lies with HTC and Android/Us or Pioneer/Parrot themselves,, might be worth asking whats the official standpoint on this with the Manufacturer and see if they are getting this same issue from multiple folks
uConnect and Bluetooth Media
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I have the same problem with my HTC One across four different ROMs, two GE and two Sense.
It's NOT an issue with my car stereo (uConnect system) as it works flawlessly on my Nexus 7 and VZW Galaxy Nexus. I prefer to have media (music, Ingress etc...) play over the phone. Only thing I want to play over the uConnect is the actual phone. No matter how many times I unselect media in the bluetooth settings it selects it again.
I see this is an old thread, anyone have any ideas?
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
deadman3000 said:
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
Click to expand...
Click to collapse
I've just installed Bluetooth Auto Connect have to go run some errands in a little while, I'll let you know if it helps out managing profiles or not.
If it works let me know what settings you used as I don't understand all the options lol.
bluetooth problem
Hi developers: Thanks Team Venom for a great ROM. I have only one problem. Rom 2.7 no problem with Bluetooth in the car. 3.1 Installation of clean and dirty disables bluetooth. Ten seconds connected and then disconnected. Again, connects and disconnects. So it all over again. It is in version 3.6 ... any change BT software? You can install the software separately BT? Or any other advice? Thank you very much
edit: I deleted the original settings in the car. Again the connection and still the same problem.
Hello! Thank you in advance for any help.
My Goal is to make a Profile / Task to enter into "Car Mode" and then when the car is Disconnected Go back into Normal Mode.
I always have my BT headphone connected. If they are connected to my phone the car will not connect to the phone. So If i make a shortcut to initiate that would work so Click shortcut "Enter Car Mode", Disconnect from BT ear buds, Connect to BT Car head unit, turn portrait mode on, Start CAR App.
Then when BT Car Head Unit disconnects turn portrait mode off, kill CAR app. (Dont really need it to reconnect to Earbuds because they would of turned of)
I've played with states and Near BT but nothing has really been consistent or worked correctly. Any Help would be great! Thanks!
Use secure settings if you want to connect/disconnect a Bluetooth device
There's an app called Bluetooth Auto Connect that also has Tasker integration. I've never used it so I can't say how well it works or if it will even do what you want to accomplish. It's free so it might be worth a look.