Hello,
I tried to flash a custom rom on my Xperia T and I got "FAILED (status read failed (Protocol error))" after this I got stuck on fastboot and my computer can't find it so i can't do fastboot reboot or try to flash the rom again, is there any way to make my phone reset without the batery running out?
Press and hold both power button and volume up until it vibrates 3 times.
PS, If it doesn't work its power button and volume down...
I must ask, have you unlocked your bootloader? If not you cannot flash a non stock based custom rom.
gregbradley said:
Press and hold both power button and volume up until it vibrates 3 times.
PS, If it doesn't work its power button and volume down...
I must ask, have you unlocked your bootloader? If not you cannot flash a non stock based custom rom.
Click to expand...
Click to collapse
Thanks, it worked . The bootloader is unlocked but it failed for some reason.
joaomiguel said:
Thanks, it worked . The bootloader is unlocked but it failed for some reason.
Click to expand...
Click to collapse
what were you flashing and which command did you use?
Try again and if you have any issues, just let me know
gregbradley said:
what were you flashing and which command did you use?
Try again and if you have any issues, just let me know
Click to expand...
Click to collapse
I was trying to flash CM10.1 RC5 (download.cyanogenmod.org/?type=RC&device=mint).
I used fastboot flash boot boot.img
joaomiguel said:
I was trying to flash CM10.1 RC5 (download.cyanogenmod.org/?type=RC&device=mint).
I used fastboot flash boot boot.img
Click to expand...
Click to collapse
That should be ok.
You could try the cm10.1 found in the original dev thread and just flash the .zip in recovery. That will install the kernel for you as well.
gregbradley said:
That should be ok.
You could try the cm10.1 found in the original dev thread and just flash the .zip in recovery. That will install the kernel for you as well.
Click to expand...
Click to collapse
I did just that I installed 20130617mint everything seemed fine but now it's on the CM circle boot animation for over 15 minutes, is this normal?
Use this link to find a download
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-10-1
I did, the first time I got caught in a boot loop but I reflashed and now is working. Thanks.
Related
Please try this, 'v' owners:
http://forum.xda-developers.com/showthread.php?t=1118132
can someone with a 'v', please take a nandroid backup, and see if the update.zip method works for you?
if it does work, you may not have access to your radio.
please report back.
thx.
yeah guys give it a try please, i would love to see 3.1 on 10.1v
Few people already tried to do it. It doesn't work!
this is a new method.
flash in recovery (not cwm restorable method).
please test.
OK after this step: volume down to apply update from /sdcard
I'm stuck on: Booting recovery kernel image
you use CWM or IO's stock recovery on your 10.1v to flash.
you cannot flash this through 10.1v's stock recovery.
is this what you have done, and after reboot, you get stuck on that screen?
That's correct
I'm using stock recovery. Only thing I've done so far is unlock bootloader using this method
http://forum.xda-developers.com/showthread.php?t=1064793
deleted.
....
Yanluk said:
I'm using stock recovery. Only thing I've done so far is unlock bootloader using this method
http://forum.xda-developers.com/showthread.php?t=1064793
Click to expand...
Click to collapse
you cant flash this through your stock recovery.
please use CWM or IO's stock recovery.
latest cwm:
http://droidbasement.com/db-blog/?p=2061
fastboot boot RECOVERY.IMG
I can flash clockwork recovery. Just going through blog now.
Yanluk said:
I can flash clockwork recovery. Just going through blog now.
Click to expand...
Click to collapse
no need to flash. just boot it.
first recover your system to a working/bootable state, then re-try.
it's working. i just powered it off and on
do you have 3.1 on your 'v' now with radio access?
DO you use IRC or anything where we can chat live?
yes. irc.freenode.net. pershoot in #cyanogenmod
pershoot said:
do you have 3.1 on your 'v' now with radio access?
Click to expand...
Click to collapse
No. What I have now is 3.0.1 with unlocked bootloader. and stock recovery. trying to get clockwork recowery t o flash (having problem finding drivers for tab for win7)
i see ok.
just follow the sticky on top to get your fastboot working and all that. then pls report back.
here are drivers:
http://droidbasement.com/galaxy/drivers
you may have to reinstall android bootloader interface.
thx.
Ok after doing
Enter fastboot by holding vol down and power, then pressing vol down (to the USB icon) then up to select.
fastboot boot recovery-cwm_4.0.0.4-sam-tab-10.1.img (latest is -0616;
I'm stuck on: "Booting downloaded image" for now more than 5 minutes
Hello,
I rooted my phone and already had a custom firmware on it.
but when I tried to upload a back up. i have bricked my phone
No recover & no Fastboot will load.
The bootloader depends on when the power button is pressed.
how can I load new custom firmware, if the recovery and fastboot not working ?
Pls Help xD
Tajko said:
Hello,
I rooted my phone and already had a custom firmware on it.
Click to expand...
Click to collapse
Are you talking about a custom firmware or custom rom? Custom firmware require S-OFF to be flashed so I think you a more speaking about a custom rom right?
but when I tried to upload a back up. i have bricked my phone
Click to expand...
Click to collapse
You meant that you have tried to restore a backup? Which backup? using what recovery version?
No recover & no Fastboot will load.
Click to expand...
Click to collapse
So your phone doesn't turn on at all? What happen when trying to boot in recovery? Is your phone detected by your pc when connect to it in bootloader mode (fastboot UBS)
The bootloader depends on when the power button is pressed.
Click to expand...
Click to collapse
What? sorry I don't understand what you are trying to say here "depends on"? Phone is stuck in bootloader mode when pressing power button? Phone will not turn on?
how can I load new custom firmware, if the recovery and fastboot not working ?
Click to expand...
Click to collapse
Again I think you are confusing firmware and software (rom)
Firmware is all the low level part like the bootloader, radio, recovery, kernel, drivers, etc etc.
Software (rom) is your operating system
so you want to flash a custom firmware or a custom rom?
You must have fastboot working, this is your #1 priority atm
Since pepole have no knolege of what they are doing and kind of blame me for it i will not provide the images anymore.
Please lock this thread.
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
akarol said:
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
Click to expand...
Click to collapse
worst case just reflash TWRP =]
akarol said:
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
Click to expand...
Click to collapse
You can use whatever recovery you would like, the system image does not affect the recovery in any way.
Thanks - flashed your bootloader files which got me out of a never ending boot animation issue
j32olger said:
Thanks - flashed your bootloader files which got me out of a never ending boot animation issue
Click to expand...
Click to collapse
The bootloop have nothing to do with my bootloader files, they are completley stock from the ota file!
If you installing the new bootloader files on older roms you are asking for troubles.
Boot the watch in bootloader mode and flash the files as described and you watch will work.
Af if it bootlooping run a "Fastboot -w" after flashing.
Greetings, Is the newly released OTA compatible with your rom?
drmcatchr said:
Greetings, Is the newly released OTA compatible with your rom?
Click to expand...
Click to collapse
No ota files will only work with stock untouched rom.
bunny0007 said:
No ota files will only work with stock untouched rom.
Click to expand...
Click to collapse
Are you planning on releasing a pre-rootet image of the latest ota?
Would be greatly appreciated!
2k4ever said:
Are you planning on releasing a pre-rootet image of the latest ota?
Would be greatly appreciated!
Click to expand...
Click to collapse
Have added it today.
I tried this using the update (LCA44B) and now the watch doesn't even turn on. No LG logo or anything.
GuiyeC said:
I tried this using the update (LCA44B) and now the watch doesn't even turn on. No LG logo or anything.
Click to expand...
Click to collapse
And you did follow the instuctions?7
Flash bootloader stuff
Flash system image
Flash boot image
Have testet it serval times without errors.
bunny0007 said:
And you did follow the instuctions?7
Flash bootloader stuff
Flash system image
Flash boot image
Have testet it serval times without errors.
Click to expand...
Click to collapse
Yep, just like in the steps, the thing did show a FAILED (anti-rollback) when flashing the 'aboot'. I just used everything that was on the zip, now the watch doesn't even show the LG logo, I've tried plugging it on and off and keeping the reset button pressed for a while. I really don't know what else to try.
I'm waiting for it to run out of battery, but I don't even know if it's "on".
GuiyeC said:
Yep, just like in the steps, the thing did show a FAILED (anti-rollback) when flashing the 'aboot'. I just used everything that was on the zip, now the watch doesn't even show the LG logo, I've tried plugging it on and off and keeping the reset button pressed for a while. I really don't know what else to try.
I'm waiting for it to run out of battery, but I don't even know if it's "on".
Click to expand...
Click to collapse
Did just ran it on my own watch and everything working.
If you aboot fails flashing your watch might have another problem, i assume that your watch have an unlocked bootloader??
bunny0007 said:
Did just ran it on my own watch and everything working.
If you aboot fails flashing your watch might have another problem, i assume that your watch have an unlocked bootloader??
Click to expand...
Click to collapse
Yes, it had the boot loader unlocked, and I can't try again flashing the aboot because I can't get it to recovery mode or fast boot mode or anything.
Who can I get the images from?
bunny0007 said:
Since pepole have no knolege of what they are doing and kind of blame me for it i will not provide the images anymore.
Please lock this thread.
Click to expand...
Click to collapse
By people, do you mean 1 person ???
Pretty unfair for other, isn't it ?
I am looking for bootloader files for the G Watch R to flash over what I believe to be a corrupt bootloader on my device. It will only boot when on the charging stand, and so far I have only been able to get it to boot to 5.0.1 successfully. Once the device tries to pull down the OTA update it reboots and proceeds to run the update and then it fails and powers off.
Currently I can access fastboot and I can get it to boot a stock recovery and twrp with the 5.0.1 boot.img flashed to my device.
Can anyone who has downloaded the original package from this thread PM me the files? I need to reflash my bootloader files to attempt to fix a booting issue with my watch. Any help would be appreciated and I will not hold anyone accountable if I hard brick my device.
fnj00 said:
Can anyone who has downloaded the original package from this thread PM me the files? I need to reflash my bootloader files to attempt to fix a booting issue with my watch. Any help would be appreciated and I will not hold anyone accountable if I hard brick my device.
Click to expand...
Click to collapse
Hi there ,
Why don't you try this one ??
http://forum.xda-developers.com/g-w...edroid-r-urbane-port-v1-0-0-june-6th-t3128850
Hello, i want to install custom rom but as i know first i must to unlock bootloader.
I did download Samsung drivers, i installed adb and allowed USB debugging but when i write command "adb reboot bootloader" my phone just reboot. How can i unlok bootloader to install custom recovery and custom rom
why unlock boot loader? u can directly write custom recovery or root
asadnow2k said:
why unlock boot loader? u can directly write custom recovery or root
Click to expand...
Click to collapse
I tried install recovery with odin but still it's not working
Kernelus said:
I tried install recovery with odin but still it's not working
Click to expand...
Click to collapse
What is the version of your device and version of Android?
boyan81 said:
What is the version of your device and version of Android?
Click to expand...
Click to collapse
It is SM-G800F and android version 6.0.1
I just want to install custom rom I did it on manye devices but here i can't. :/
Kernelus said:
It is SM-G800F and android version 6.0.1
I just want to install custom rom I did it on manye devices but here i can't. :/
Click to expand...
Click to collapse
Before you flash twrp with odin unchecked autoreboot, when done, reinsert the battery and try to boot in twrp by pressing up+home+power.
Or did you try this :https://forum.xda-developers.com/ga...uide-rooting-g800f-marshmallow-6-0-1-t3558915
boyan81 said:
Before you flash twrp with odin unchecked autoreboot, when done, reinsert the battery and try to boot in twrp by pressing up+home+power.
Or did you try this :https://forum.xda-developers.com/ga...uide-rooting-g800f-marshmallow-6-0-1-t3558915
Click to expand...
Click to collapse
Try this link
https://android.stackexchange.com/questions/77872/how-to-unlock-bootloader-on-samsung-devices
Can I try Odin and fastboot while I have installed Linux not windows?
Sames issue
boyan81 said:
Before you flash twrp with odin unchecked autoreboot, when done, reinsert the battery and try to boot in twrp by pressing up+home+power.
Or did you try this :https://forum.xda-developers.com/ga...uide-rooting-g800f-marshmallow-6-0-1-t3558915
Click to expand...
Click to collapse
Hi, I have the same setup and I've tried both methods to get root with no success. I had TWRP but the quickroot took it back out. Error shows binarys not installed so was wondering if unlocking the bootloader might fix the issue. Any suggestions? Also SuperSU has been updated according to Play store.
Thanks in advance.
i can't be able to reboot to either fast boot or into recovery, it keeps doing the boot loop, could anyone help?
phoenixnithish2112 said:
i can't be able to reboot to either fast boot or into recovery, it keeps doing the boot loop, could anyone help?
Click to expand...
Click to collapse
we are not wizards, tell us what happened to your deivice and why is bootlooping
tutibreaker said:
we are not wizards, tell us what happened to your deivice and why is bootlooping
Click to expand...
Click to collapse
I have the same issue:
firstly, I was trying to root my phone, started by flashing a recovery twrp img file which didn't work (my phone now is stuck at fastboot mode, whenever i restart it)
then i followed another tutorial to flash twrp, and it worked but i am still stuck at fastboot mode
finally i tried to flash a new rosemary flash (https://xiaomifirmwareupdater.com/miui/rosemary/stable/V13.0.10.0.SKLMIXM/) and after flash i am stuck at boot loop
D0mB4s3d said:
I have the same issue:
firstly, I was trying to root my phone, started by flashing a recovery twrp img file which didn't work (my phone now is stuck at fastboot mode, whenever i restart it)
then i followed another tutorial to flash twrp, and it worked but i am still stuck at fastboot mode
finally i tried to flash a new rosemary flash (https://xiaomifirmwareupdater.com/miui/rosemary/stable/V13.0.10.0.SKLMIXM/) and after flash i am stuck at boot loop
Click to expand...
Click to collapse
just fixed it by reflashing another version (12.5) and disable rescue from sp flash tool
tutibreaker said:
we are not wizards, tell us what happened to your deivice and why is bootlooping
Click to expand...
Click to collapse
could you suggest me a best custom rom for note 10s?
tutibreaker said:
we are not wizards, tell us what happened to your deivice and why is bootlooping
Click to expand...
Click to collapse
i have unlocked the bootloader, i tried to install GSI through my DSU loader which is in my developer option, but after it's downloaded and installed, it asked for a restart to go to the GSI, when i clicked re-start, it's just going to bootloader and doing nothing, why is that?
phoenixnithish2112 said:
could you suggest me a best custom rom for note 10s?
Click to expand...
Click to collapse
stock miui is buggy, aosp rom are more buggy so... the "best" is relative to users try and tell any rom and find the best for you, cus the "best" rom for me wont be for you
tutibreaker said:
stock miui is buggy, aosp rom are more buggy so... the "best" is relative to users try and tell any rom and find the best for you, cus the "best" rom for me wont be for you
Click to expand...
Click to collapse
I'm aware of that, pls suggests the one's you had tried, I'll weigh the pros and cons, it helps me to eliminate some of the rom