[Q] HTC One m7 Bricked no Recovery & no Fastboot possible - One (M7) Q&A, Help & Troubleshooting

Hello,
I rooted my phone and already had a custom firmware on it.
but when I tried to upload a back up. i have bricked my phone
No recover & no Fastboot will load.
The bootloader depends on when the power button is pressed.
how can I load new custom firmware, if the recovery and fastboot not working ?
Pls Help xD

Tajko said:
Hello,
I rooted my phone and already had a custom firmware on it.
Click to expand...
Click to collapse
Are you talking about a custom firmware or custom rom? Custom firmware require S-OFF to be flashed so I think you a more speaking about a custom rom right?
but when I tried to upload a back up. i have bricked my phone
Click to expand...
Click to collapse
You meant that you have tried to restore a backup? Which backup? using what recovery version?
No recover & no Fastboot will load.
Click to expand...
Click to collapse
So your phone doesn't turn on at all? What happen when trying to boot in recovery? Is your phone detected by your pc when connect to it in bootloader mode (fastboot UBS)
The bootloader depends on when the power button is pressed.
Click to expand...
Click to collapse
What? sorry I don't understand what you are trying to say here "depends on"? Phone is stuck in bootloader mode when pressing power button? Phone will not turn on?
how can I load new custom firmware, if the recovery and fastboot not working ?
Click to expand...
Click to collapse
Again I think you are confusing firmware and software (rom)
Firmware is all the low level part like the bootloader, radio, recovery, kernel, drivers, etc etc.
Software (rom) is your operating system
so you want to flash a custom firmware or a custom rom?
You must have fastboot working, this is your #1 priority atm

Related

A bricked Z1 with an unlocked bootloader

So I got my Z1 yesterday, was on 4.4.2 stock unrooted. I unlocked the bootloader using Sony's official website and fastboot, then I went on destroying the phone by flashing Philz touch recovery.img through fastboot.
And since then the phone has been bricked, I can only enter Fastboot through the blue led, while Flash mode doesn't show up any LED light and my PC sees the phone when on flashmode as n "S1 device with a parameter error".
I've tried all drivers, none worked, and the flashtool keeps suggesting I should update my drivers when connecting the phone on flash mode:
02/042/2014 22:42:11 - INFO - Device connected in flash mode
02/042/2014 22:42:30 - ERROR - Drivers need to be installed for connected device.
02/042/2014 22:42:30 - ERROR - You can find them in the drivers folder of Flashtool.
Click to expand...
Click to collapse
Is there any way I can recover from this through fastboot instead of the flashtool? I can still flash system.img and recovery.img through fastboot. I'd really appreciate any help right now.
Abu-7abash said:
So I got my Z1 yesterday, was on 4.4.2 stock unrooted. I unlocked the bootloader using Sony's official website and fastboot, then I went on destroying the phone by flashing Philz touch recovery.img through fastboot.
And since then the phone has been bricked, I can only enter Fastboot through the blue led, while Flash mode doesn't show up any LED light and my PC sees the phone when on flashmode as n "S1 device with a parameter error".
I've tried all drivers, none worked, and the flashtool keeps suggesting I should update my drivers when connecting the phone on flash mode:
Is there any way I can recover from this through fastboot instead of the flashtool? I can still flash system.img and recovery.img through fastboot. I'd really appreciate any help right now.
Click to expand...
Click to collapse
Xperia phones do not have a recovery partition to flash recovery to via fastboot.
If you can enter fastboot, then flash a stock kernel.elf with flashtool (In fastboot mode).
Then you can use flashtool to relock your boot (I imagine you have not even taken a TA backup and you are new to xperia devices, your post suggests so)
then you should be able to use pccompanion to repair, or flashtool to flash a FTF
However, by flashing a recovery image you may have bricked the phone. try what I have said, if it does not work get back in touch. (Do you have access to jtag and setool?)
gregbradley said:
Xperia phones do not have a recovery partition to flash recovery to via fastboot.
If you can enter fastboot, then flash a stock kernel.elf with flashtool (In fastboot mode).
Then you can use flashtool to relock your boot (I imagine you have not even taken a TA backup and you are new to xperia devices, your post suggests so)
then you should be able to use pccompanion to repair, or flashtool to flash a FTF
However, by flashing a recovery image you may have bricked the phone. try what I have said, if it does not work get back in touch. (Do you have access to jtag and setool?)
Click to expand...
Click to collapse
Can you link me to the files you suggested I try? There seems to be a truckload of them laying around the forum.
Also, yes, I am new to xperia phones. Didnt think they were this complicated to flash but I shouldnt have played with fastboot anyway. And no, sadly I dont have a jtag. Never needed one before.
Thanks for the help btw, I greatly appreciate this.
i dont think you have 100% installed the drivers, on windows 7 upwards you need to disable driver signature to allow any unsigned drivers to be installed
Look in the mega collection thread in the general section for a 442 ftf file. The kernel.elf will be in it
Sent from my C6903 using XDA Premium 4 mobile app
gregbradley said:
Look in the mega collection thread in the general section for a 442 ftf file. The kernel.elf will be in it
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Alright, but how do I extract it from the TFT file?
gregbradley said:
Look in the mega collection thread in the general section for a 442 ftf file. The kernel.elf will be in it
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
C6903_14.3.A.0.757_Global 1277-2880.ftf
Is this 4.4.2?
Ok here is an update; after messing with fastboot for so long and a couple of kernel flashes, I managed to boot the phone But now its stuck on the Sony logo.
A sign of hope though lies with the fact that I managed to enter recovery mode and found CWM hanging there. So now Im probably going to try ADB push a rom file to the SD and try to flash it through recovery instead.
@gregbradley
Sounds good. The reason forth hang at the sony logo will be that you have wiped the system partition. Flashing a rom based on the kernel you have will enable the phone to boot
Sent from my C6903 using XDA Premium 4 mobile app
gregbradley said:
Sounds good. The reason forth hang at the sony logo will be that you have wiped the system partition. Flashing a rom based on the kernel you have will enable the phone to boot
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Would flashing a custom rom zip from the CWM recovery, fix the bootloop? Or could it also be a baseband/firmware issue too?
Im not really familiar with Sony's bootloader unlock process, does it allow kernel flash from recovery or only through fastboot ala Htc style?
Abu-7abash said:
Would flashing a custom rom zip from the CWM recovery, fix the bootloop? Or could it also be a baseband/firmware issue too?
Im not really familiar with Sony's bootloader unlock process, does it allow kernel flash from recovery or only through fastboot ala Htc style?
Click to expand...
Click to collapse
first flash original stock rom, than root your phone and install dualrecovery... and if u relock your bootloader unlock it again... don't try custom rom before this steps
Abu-7abash said:
Would flashing a custom rom zip from the CWM recovery, fix the bootloop? Or could it also be a baseband/firmware issue too?
Click to expand...
Click to collapse
Yes, as long as the .zip contains a kernel, or id based on the same kernel you have installed now
Im not really familiar with Sony's bootloader unlock process, does it allow kernel flash from recovery or only through fastboot ala Htc style?
Click to expand...
Click to collapse
Yes, if you have an unlocked bootloader
gregbradley said:
Yes, as long as the .zip contains a kernel, or id based on the same kernel you have installed nowYes, if you have an unlocked bootloader
Click to expand...
Click to collapse
Alright thanks, gonna give it a go once im home. And yes, I already unlocked the bootloader through Sony's website and fastboot before this happened.
Vuja1 said:
first flash original stock rom, than root your phone and install dualrecovery... and if u relock your bootloader unlock it again... don't try custom rom before this steps
Click to expand...
Click to collapse
It already has the dual recovery on it but for some reason its stuck in a bootloop.
Abu-7abash said:
It already has the dual recovery on it but for some reason its stuck in a bootloop.
Click to expand...
Click to collapse
do u have any rom on it or u just have bootloop? i u can't access to rom, u need with flashtool to flash stock rom, when u do that u loose your root and lose your dualrecovery... u need to root it again and install dualrecovery
second is
if u can access to rom instal ndr utility and reboot in clockwork mod recovery...
third option si to install via fastboot advanced doomloader kernel which has clockwork mod and has root... after that to flash custom rom but stock version of custom rom
Any of you guys know of a Stock rooted 4.4.4 rom that comes with the stock kernel in a flashable zip? I have looked everywhere for one but I cant find any.
@gregbradley @Vuja1
Abu-7abash said:
Any of you guys know of a Stock rooted 4.4.4 rom that comes with the stock kernel in a flashable zip? I have looked everywhere for one but I cant find any.
@gregbradley @Vuja1
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2761614
try this one
Vuja1 said:
http://forum.xda-developers.com/showthread.php?t=2761614
try this one
Click to expand...
Click to collapse
Already did, not really what Im looking for. I want the stock rom but only rooted and in a flashable zip, can't believe there aint any around.
Abu-7abash said:
Already did, not really what Im looking for. I want the stock rom but only rooted and in a flashable zip, can't believe there aint any around.
Click to expand...
Click to collapse
I can think of at least 3 in the development section off the top of my head...
gregbradley said:
I can think of at least 3 in the development section off the top of my head...
Click to expand...
Click to collapse
You can? Link me Greg..link me

[Q] How flash Stock firmware with twrp

Hello mates,
I just want to switch back to stock firmware just downloaded the B133 maybe i will upgrade to EMUI.3.0 manually but i have twrp installed how can i flash the stock firmware? which is not in zip file its dload/update.app
can someone please guide me?
.
Thanks and blessing
Farrukh
FarrukhQadri said:
Hello mates,
I just want to switch back to stock firmware just downloaded the B133 maybe i will upgrade to EMUI.3.0 manually but i have twrp installed how can i flash the stock firmware? which is not in zip file its dload/update.app
can someone please guide me?
.
Thanks and blessing
Farrukh
Click to expand...
Click to collapse
Hello,
You must first install stock recovery in order to manually update through Updater > Local update, and yes update.app must be in the dload folder on the SD card. (connect your device to your PC, install adb, reboot it to bootloader using 'adb reboot bootloader', put 'recovery.img' into the same folder as adb, execute 'fastboot flash recovery recovery.img', then do 'fastboot reboot', once your device is fully booted go to the Updater app, and do a local update.)
B609 Stock recovery - Download here
Best regards,
James
Daentrod said:
Hello,
You must first install stock recovery in order to manually update through Updater > Local update, and yes update.app must be in the dload folder on the SD card. (connect your device to your PC, install adb, reboot it to bootloader using 'adb reboot bootloader', put 'recovery.img' into the same folder as adb, execute 'fastboot flash recovery recovery.img', then do 'fastboot reboot', once your device is fully booted go to the Updater app, and do a local update.)
B609 Stock recovery - Download here
Best regards,
James
Click to expand...
Click to collapse
Thanks a lot i will do it tonight
FarrukhQadri said:
Thanks a lot i will do it tonight
Click to expand...
Click to collapse
when i execute the adb reboot boat loader command my device won't gets into boat loader but it reboot i tried rebooting into boat loader by flashify app it shows a screen fastboot rescue mode. (phone is unlocked)
i can flash the recovery.
whats wrong ??
FarrukhQadri said:
when i execute the adb reboot boat loader command my device won't gets into boat loader but it reboot i tried rebooting into boat loader by flashify app it shows a screen fastboot rescue mode. (phone is unlocked)
i can flash the recovery.
whats wrong ??
Click to expand...
Click to collapse
That is exactly what you need - adb reboot bootloader (<- it's one word!) gets the phone into fastboot mode (same as flashify). From here you can flash the recovery. On the PC, run fastboot flash recovery <path-to-stock-recovery>. This will get you the stock recovery on the phone. Now you can use the 3 button method to flash the stock ROM.
g4b3rm4n said:
That is exactly what you need - adb reboot bootloader (<- it's one word!) gets the phone into fastboot mode (same as flashify). From here you can flash the recovery. On the PC, run fastboot flash recovery <path-to-stock-recovery>. This will get you the stock recovery on the phone. Now you can use the 3 button method to flash the stock ROM.
Click to expand...
Click to collapse
Can you please guide me a bit more actually now my device is not booting into recovery neither into system its stuck on logo and not going ahead. so should i follow these steps only flash stock recovery in fastboot then flash stock rom?
my phone is stuck on logo and it remains on the logo screen for a couple of seconds then it reboots itself automatically and keep doing the same..
Thanks
FarrukhQadri said:
Can you please guide me a bit more actually now my device is not booting into recovery neither into system its stuck on logo and not going ahead. so should i follow these steps only flash stock recovery in fastboot then flash stock rom?
my phone is stuck on logo and it remains on the logo screen for a couple of seconds then it reboots itself automatically and keep doing the same..
Thanks
Click to expand...
Click to collapse
You must get it into fastboot mode. If the phone restarts and does not boot into the OS, then it's a huge problem. You may try to restore the phone with HiSuite, but my bet is that you'd better get it to a service - you probably flashed the wrong bootloader.
You might have luck with the recovery though - hold down VOLUME UP and POWER when turning the device on. This might get you ADB, so you might boot into fastboot mode.
g4b3rm4n said:
You must get it into fastboot mode. If the phone restarts and does not boot into the OS, then it's a huge problem. You may try to restore the phone with HiSuite, but my bet is that you'd better get it to a service - you probably flashed the wrong bootloader.
You might have luck with the recovery though - hold down VOLUME UP and POWER when turning the device on. This might get you ADB, so you might boot into fastboot mode.
Click to expand...
Click to collapse
Let me have a try i will get back to you. i had this problem with my previous phone but this time its getting so long i'm worried of it, yes my bad i have flashed a wrong kernel mistakenly it was on the phone so i flashed the wrong file.
FarrukhQadri said:
Let me have a try i will get back to you. i had this problem with my previous phone but this time its getting so long i'm worried of it, yes my bad i have flashed a wrong kernel mistakenly it was on the phone so i flashed the wrong file.
Click to expand...
Click to collapse
You are right i have to get it to service its not working at all cant even find in fastboot neither in recovery .. this goes so expensive
Press power, volume-down and connect device to PC simultaneously. You will get into fastboot mode. Flash boot image and recovery image that was exactly from your firmware version.
Kostyan_nsk said:
Press power, volume-down and connect device to PC simultaneously. You will get into fastboot mode. Flash boot image and recovery image that was exactly from your firmware version.
Click to expand...
Click to collapse
can you please share drivers link? i have booted into fastboot and adb installed already but it cant find my device ..
Resolved
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...
how?
FarrukhQadri said:
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...
Click to expand...
Click to collapse
How?
jefpcbr said:
How?
Click to expand...
Click to collapse
THAT HOW , FORGET some crap TWRP ! it is no use with huawei devices !
Simona Simmy said:
THAT HOW , FORGET some crap TWRP ! it is no use with huawei devices !
Click to expand...
Click to collapse
but i think twrp is better than cwn
FarrukhQadri said:
but i think twrp is better than cwn
Click to expand...
Click to collapse
What ? In waht way god..
Same purpose .. no better at all it will destroy your phone soon..
killed my phone
Daentrod said:
Hello,
You must first install stock recovery in order to manually update through Updater > Local update, and yes update.app must be in the dload folder on the SD card. (connect your device to your PC, install adb, reboot it to bootloader using 'adb reboot bootloader', put 'recovery.img' into the same folder as adb, execute 'fastboot flash recovery recovery.img', then do 'fastboot reboot', once your device is fully booted go to the Updater app, and do a local update.)
Best regards,
James
Click to expand...
Click to collapse
Hi.
This killed my mobile.
Now I can't boot in, I i can have is the bootloader screen saying ur phone is locked
Please someone help.

[ROM] Stock Rooted 5.1.1

Since pepole have no knolege of what they are doing and kind of blame me for it i will not provide the images anymore.
Please lock this thread.
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
akarol said:
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
Click to expand...
Click to collapse
worst case just reflash TWRP =]
akarol said:
Thank you so much!
Question: Do we have to flash the stock recovery after flashing the rooted system image? I prefer to have TWRP recovery anyways.
Click to expand...
Click to collapse
You can use whatever recovery you would like, the system image does not affect the recovery in any way.
Thanks - flashed your bootloader files which got me out of a never ending boot animation issue
j32olger said:
Thanks - flashed your bootloader files which got me out of a never ending boot animation issue
Click to expand...
Click to collapse
The bootloop have nothing to do with my bootloader files, they are completley stock from the ota file!
If you installing the new bootloader files on older roms you are asking for troubles.
Boot the watch in bootloader mode and flash the files as described and you watch will work.
Af if it bootlooping run a "Fastboot -w" after flashing.
Greetings, Is the newly released OTA compatible with your rom?
drmcatchr said:
Greetings, Is the newly released OTA compatible with your rom?
Click to expand...
Click to collapse
No ota files will only work with stock untouched rom.
bunny0007 said:
No ota files will only work with stock untouched rom.
Click to expand...
Click to collapse
Are you planning on releasing a pre-rootet image of the latest ota?
Would be greatly appreciated!
2k4ever said:
Are you planning on releasing a pre-rootet image of the latest ota?
Would be greatly appreciated!
Click to expand...
Click to collapse
Have added it today.
I tried this using the update (LCA44B) and now the watch doesn't even turn on. No LG logo or anything.
GuiyeC said:
I tried this using the update (LCA44B) and now the watch doesn't even turn on. No LG logo or anything.
Click to expand...
Click to collapse
And you did follow the instuctions?7
Flash bootloader stuff
Flash system image
Flash boot image
Have testet it serval times without errors.
bunny0007 said:
And you did follow the instuctions?7
Flash bootloader stuff
Flash system image
Flash boot image
Have testet it serval times without errors.
Click to expand...
Click to collapse
Yep, just like in the steps, the thing did show a FAILED (anti-rollback) when flashing the 'aboot'. I just used everything that was on the zip, now the watch doesn't even show the LG logo, I've tried plugging it on and off and keeping the reset button pressed for a while. I really don't know what else to try.
I'm waiting for it to run out of battery, but I don't even know if it's "on".
GuiyeC said:
Yep, just like in the steps, the thing did show a FAILED (anti-rollback) when flashing the 'aboot'. I just used everything that was on the zip, now the watch doesn't even show the LG logo, I've tried plugging it on and off and keeping the reset button pressed for a while. I really don't know what else to try.
I'm waiting for it to run out of battery, but I don't even know if it's "on".
Click to expand...
Click to collapse
Did just ran it on my own watch and everything working.
If you aboot fails flashing your watch might have another problem, i assume that your watch have an unlocked bootloader??
bunny0007 said:
Did just ran it on my own watch and everything working.
If you aboot fails flashing your watch might have another problem, i assume that your watch have an unlocked bootloader??
Click to expand...
Click to collapse
Yes, it had the boot loader unlocked, and I can't try again flashing the aboot because I can't get it to recovery mode or fast boot mode or anything.
Who can I get the images from?
bunny0007 said:
Since pepole have no knolege of what they are doing and kind of blame me for it i will not provide the images anymore.
Please lock this thread.
Click to expand...
Click to collapse
By people, do you mean 1 person ???
Pretty unfair for other, isn't it ?
I am looking for bootloader files for the G Watch R to flash over what I believe to be a corrupt bootloader on my device. It will only boot when on the charging stand, and so far I have only been able to get it to boot to 5.0.1 successfully. Once the device tries to pull down the OTA update it reboots and proceeds to run the update and then it fails and powers off.
Currently I can access fastboot and I can get it to boot a stock recovery and twrp with the 5.0.1 boot.img flashed to my device.
Can anyone who has downloaded the original package from this thread PM me the files? I need to reflash my bootloader files to attempt to fix a booting issue with my watch. Any help would be appreciated and I will not hold anyone accountable if I hard brick my device.
fnj00 said:
Can anyone who has downloaded the original package from this thread PM me the files? I need to reflash my bootloader files to attempt to fix a booting issue with my watch. Any help would be appreciated and I will not hold anyone accountable if I hard brick my device.
Click to expand...
Click to collapse
Hi there ,
Why don't you try this one ??
http://forum.xda-developers.com/g-w...edroid-r-urbane-port-v1-0-0-june-6th-t3128850

【recovery】TeamWim Recovery Project for Nokia 6

only TA-1003!!!
if you are using TA-1000,you have to flash this before.
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667/page1
Nokia6 Qitu twrp 3.1.1 recovery Toolkit (9008 ports, miflash brush into), is the world's first bar, recovery function is normal, with root function
download link: https://1drv.ms/u/s!AhvzBzjU0o8filtloJ6szD51cGtT
Recovery automatically decrypt data, without formatting, function properly
This mobile phone is special, unable to unlock, need to enter the 9008 port recovery flash method, similar to coolpad1, you can use the new version of the miflash
Recovery advanced, there are supersu root function, be sure to flash this root, or restart directly, 99% may not boot, do not use other link to download the supersu.
As for how to enter 9008 cmd:ADB reboot EDL can not, short access
As for how to enter the recovery, l do not know how to enter, ADB reboot recovery can enter or terminal:reboot recovery
bug:i don't know
this is Chinese twrp ,If you are speaking English, please try the English twrp theme.
Can you please add some more detail to the post? Like something for a noob user?
singhnsk said:
Can you please add some more detail to the post? Like something for a noob user?
Click to expand...
Click to collapse
maybe you should this
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
after flash this firmware
1.install miflash
2.download recovery.zip
3.unpack recovery.zip(you can get a folder named recover)
4.lunch miflash in start menu
5.Click “drive” above miflash and click “reinstall”
6.Restart the computer, disable the driver mandatory signature
7.lunch miflash,click ”select“ and select recovery floder
8.enter your phone into com9008 mode
9.Connect the computer and mobile phone by using cable
10.click “load device(
As the bootloader isn't unlockable yet, any flashing of the recovery, kernel or rom will most likely end in a brick. This may not be recoverable...
ultramag69 said:
As the bootloader isn't unlockable yet, any flashing of the recovery, kernel or rom will most likely end in a brick. This may not be recoverable...
Click to expand...
Click to collapse
you can recovery your device at here https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
Mate, have you already flashed this recovery via edl?
Denver163 said:
Mate, have you already flashed this recovery via edl?
Click to expand...
Click to collapse
yes,i flashed this recovery by 9008mode,it is working
can anyone here with the original TA-1000 ROM do a backup of the ROM and post it here? many of us having the phone but with a custom ROM, need the actual ROM. thanks!
iammrwesley said:
can anyone here with the original TA-1000 ROM do a backup of the ROM and post it here? many of us having the phone but with a custom ROM, need the actual ROM. thanks!
Click to expand...
Click to collapse
So far, there are no custom ROM
Do you have root access after installation from this recovery?
18227077056 said:
So far, there are no custom ROM
Click to expand...
Click to collapse
U sure?
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
This is the TA-1003 ROM, it is counted as custom ROM when install on TA-1000 phone, it won't get any OTA update.
binarnh said:
Do you have root access after installation from this recovery?
Click to expand...
Click to collapse
my Nokia 6 have already rooted.
iammrwesley said:
U sure?
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
This is the TA-1003 ROM, it is counted as custom ROM when install on TA-1000 phone, it won't get any OTA update.
Click to expand...
Click to collapse
this is an official ROM,The official said: any changes to the phone firmware will result in no updates, even if you flashed an official firmware by personal.
18227077056 said:
this is an official ROM,The official said: any changes to the phone firmware will result in no updates, even if you flashed an official firmware by personal.
Click to expand...
Click to collapse
But that modyfied rom too much power consuming! Guys, if you got stock ta1000, dont even think of that damn ta1003rom.. it got native 6 cores active all the time while stock got 2 cores active in stanby.. and no ota update is sad. I think i will try stock ta1025 from nokia 5 instead.. or wait a bit for some new mods
Denver163 said:
But that modyfied rom too much power consuming! Guys, if you got stock ta1000, dont even think of that damn ta1003rom.. it got native 6 cores active all the time while stock got 2 cores active in stanby.. and no ota update is sad. I think i will try stock ta1025 from nokia 5 instead.. or wait a bit for some new mods
Click to expand...
Click to collapse
Nokia 5?what do you want to do?
Something outstanding to make everybody gone crazy
Root undetected after flash to TA-1003 Rom and recovery files later...
edit. my fail.... I lunch twrp and I don't understand chinese language... help
edit. 2. Works!! Thanks people
I confirmed this works.....
Just force enter EDL (not using the flash cable method but the chocolate bar method....lol)
Flash the Qitu TWRP recovery...sorry all in chinese
https://drive.google.com/open?id=0B-xwlXVEN2U2UTUtUVU5MmtfdWs
https://drive.google.com/open?id=0B-xwlXVEN2U2UVZ3eEFSVDF3TFU
https://drive.google.com/open?id=0B-xwlXVEN2U2UXg0NS1ndExzRG8
https://drive.google.com/open?id=0B-xwlXVEN2U2eUFJX01mbUtTcE0
Installed Adway, Lukcy patcher and busybox!
https://drive.google.com/open?id=0B-xwlXVEN2U2Smh4UVBDMV9yZmc
https://drive.google.com/open?id=0B-xwlXVEN2U2VUdBU1FNUFNsLVE
https://drive.google.com/open?id=0B-xwlXVEN2U2dzNOMUNtSkluT2s
Backup system in TWRP.
https://drive.google.com/open?id=0B-xwlXVEN2U2bVc4TS1XbHk2NXM
18227077056 said:
my Nokia 6 have already rooted.
Click to expand...
Click to collapse
Is substratum works without any other modification on this rom?
binarnh said:
Is substratum works without any other modification on this rom?
Click to expand...
Click to collapse
maybe yes

Merlin , bricked , cant enter fastboot or recovery, cant turn device off , bootloop

Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Ifuckinghatemyselfandall said:
Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Click to expand...
Click to collapse
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
flairepathos.info said:
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
Click to expand...
Click to collapse
I am going to try the mtk bypass tool, is that going to work? if not i am going to try your instructions, however it did not boot into the recovery even after reflashing , i have tried that before with the twrp app
It cannot detect the device, it isnt in device manager either, i am getting scared
edit: actually it gets detected in device manager as "usb serial device (com4)" when i hold the power button, volume up and volume down at the same time, when i do that, the device stays with a black screen
SP flash tool still does not detect it
it seems to be disconnecting while in this state
Please help, i cant turn the device off
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Ifuckinghatemyselfandall said:
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Click to expand...
Click to collapse
You need to flash the SAME miui version present on the device first.
VD171 said:
You need to flash the SAME miui version present on the device first.
Click to expand...
Click to collapse
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
It is now giving me "error status error" please help
Ifuckinghatemyselfandall said:
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
Click to expand...
Click to collapse
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
VD171 said:
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
Click to expand...
Click to collapse
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Ifuckinghatemyselfandall said:
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Click to expand...
Click to collapse
Custom recovery will never brick a device.
VD171 said:
Custom recovery will never brick a device.
Click to expand...
Click to collapse
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Ilovethewholeworldbutme said:
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Click to expand...
Click to collapse
Just flash the full stock miui again.

Categories

Resources