I rooted, then unlocked the phone, then went installing the CWM contained in the "all in one tool" thing in the development forum for our device. Sadly, I cant seem to install any ROM, I always initially get some sort of getprop error? Any ideas?
voon said:
I rooted, then unlocked the phone, then went installing the CWM contained in the "all in one tool" thing in the development forum for our device. Sadly, I cant seem to install any ROM, I always initially get some sort of getprop error? Any ideas?
Click to expand...
Click to collapse
What version of CWM is installed ?
You need 6.0.3.1 to install custom roms.
Cuniek said:
What version of CWM is installed ?
You need 6.0.3.1 to install custom roms.
Click to expand...
Click to collapse
6.0.2.8 .... I before tried the thing from the CWM thread, with this warning of not working on V20 beta something, installed by an apk? That one was not bootable before and sort of rendered my phone dead, as it woul dnot boot into the installed LG ROM as well after I tried the install. I had to do an emergency reinstall of LGs own ROM with the LG Support Tool ... so I don't trust that CWM there ..... I'm not sure, which ones will work on my Euro P880.
voon said:
6.0.2.8 .... I before tried the thing from the CWM thread, with this warning of not working on V20 beta something, installed by an apk? That one was not bootable before and sort of rendered my phone dead, as it woul dnot boot into the installed LG ROM as well after I tried the install. I had to do an emergency reinstall of LGs own ROM with the LG Support Tool ... so I don't trust that CWM there ..... I'm not sure, which ones will work on my Euro P880.
Click to expand...
Click to collapse
Use this:
http://db.tt/nNduvjs2
Cuniek said:
Use this:
http://db.tt/nNduvjs2
Click to expand...
Click to collapse
Ok ... how? I'm only used to CWM installers, that do this scripted ... I'm not sure what to do with the image?
voon said:
Ok ... how? I'm only used to CWM installers, that do this scripted ... I'm not sure what to do with the image?
Click to expand...
Click to collapse
Do u have any workable rom installed ?
You can download Rom Manager from play store and then download and install cwm 6.0.3.1. from rom manager
Nope ... ROM is broken. I can't even put the original LG ROM on it ... the LG USB drivers seem not compatible with W8.
voon said:
Nope ... ROM is broken. I can't even put the original LG ROM on it ... the LG USB drivers seem not compatible with W8.
Click to expand...
Click to collapse
Have you tried to run LG Support Tool as Administrator - it helped me to install original LG ROM
Ok, managed to do it somehow ... it's installing by means of emergency install ... I hope it runs through
voon said:
Nope ... ROM is broken. I can't even put the original LG ROM on it ... the LG USB drivers seem not compatible with W8.
Click to expand...
Click to collapse
they're compatible, but it's a hassle to make them work. you gotta reinstall your drivers every time you need to use S/W mode, and after you install, check device manager, some components are installed as unrecognized, you gotta update driver -> automatic search.
After you unlock your bootloader how to install CWM 6.0.3.1
Download the tool ,,
http://d-h.st/HFR
extract the folder
open the folder
find file with name: O4X_CWM.img
rename it to something else e.g. O4X_CWM_old.img
Download new cwm (i gave you link before, but here is another
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.3.1-p880.img
put recovery-clockwork-touch-6.0.3.1-p880.img file in the same folder as your renamed file (O4X_CWM_old.img)
rename recovery-clockwork-touch-6.0.3.1-p880.img to O4X_CWM.img
Right click on "[All-In-One][P880].bat" choose run as administrator
The tool will ask you if you have the drivers ,, install them if you don't have .
The tool will show you 8 options .
In your phone go to Settings/Developer Options/Check "USB Debugging" ,,
then connect phone .
choose CWM Recovery option.
wait for complete
disconnect phone
Turn off phone
Turn on phone with vol down pressed.
It should load cwm 6.0.3.1
It worked on my phone, good luck
Whopeee ... operation successful! I can finally install the rom The touch feature of that CWM is reall yfantastic .. no more crazy volume button rocking. Thanks much!
To sum up what I did in short:
- Started with Euro 4.1.2 LG original ROM.
- Press Power/Vol Down to get into the tiny original blue Menu
- Chose install by ADB
- used the root package for 4.1.2 (small thing linked in here), just ran root.bat in a administrator cmd shell on windows --> rooted phone
- Unlocked phone using the cat & echo of the file named in here --> unlocked
- Used the all in one tool with the new CWM file to install the CWM
Now to check out those roms.... I hope one of them is sophisticated enough not to be a crazy battery eater and heat producer...
(man, these guessing games on which info on here is accurate every few months drives me completely crazy..... but in the end it's great)
Related
ROM Manager now supports the O2X, use that instead!
---------------------------------------------------------------
This is a tool to easily switch recoveries on the Optimus 2X - this is simply a frontend for the .bat file that paul posted (same adb functionality), some people just prefer a GUI for these things and I had some time to kill. It includes the both the stock & clockworkmod recovery images and you get to choose which one to write to the phone.
Thanks to paul for both the clockworkmod & stock recovery images.
Notes:
- This will NOT work on the T-Mobile G2X - dont even try.
- You do not need a rooted device.
- If for some reason all hell breaks loose and the process fails or the program crashes, you can simply use pauls .bat file to overwrite the recovery image or try the program again.
Guide:
1. Make sure you have the LG mobile driver installed for your O2X (You need to be able to run adb commands).
2. Connect your phone to your computer and enable USB debugging (Settings->Applications->Development).
3. Open the program and follow the 3 steps.
Problems?
1. The program needs to create a folder to extract needed files, place the program in a folder with read & write access. (or run as administrator).
2. Your phone needs to be turned on.
Download:
REMOVED - Use ROM Manager instead.
While we are at it, would it be worth it to create a GUI to manage kernels and small tweaks?
Great job and... good idea!!!
nice and easy.
just the way i like it
thank you
Works flawlessly. THX!
nice
wow nice job,
you make it easy for everybody.
thanks allot.
a question, if I'm Rom Modaco ext4 or another, I click the stock and gives the mobile factory (stock ROM)?
What if I have more than one backup in CWM? And what exactly means Stock Recovery? Will it reset my phone to stock? without any CWM and stuff installed afterwards?
Slash75 said:
a question, if I'm Rom Modaco ext4 or another, I click the stock and gives the mobile factory (stock ROM)?
Click to expand...
Click to collapse
atm this program just lets you easily switch recovery images, so no it does not flash the stock rom.
Slash75 said:
a question, if I'm Rom Modaco ext4 or another, I click the stock and gives the mobile factory (stock ROM)?
Click to expand...
Click to collapse
As stated above, this tool only overwrites the recovery partition, it does not touch any other partitions - to get a stock ROM image you need to flash one using either nvflash or smartflash.
http://forum.xda-developers.com/showthread.php?p=12890619
Mehrsau said:
What if I have more than one backup in CWM? And what exactly means Stock Recovery? Will it reset my phone to stock? without any CWM and stuff installed afterwards?
Click to expand...
Click to collapse
This does not touch your sdcard or any of the backups made by ClockworkMod recovery. This is a tool to change between ClockworkMod recovery and the stock recovery provided by LG.
wonderfull! +1
this has completely ****ed my phone.. wont even boot now.
jangomango said:
this has completely ****ed my phone.. wont even boot now.
Click to expand...
Click to collapse
Same problem here. Had to flash with NVFlash again...
This should not do anything that will prevent your phone from booting :/
It does the same as the .bat provided by paul that installs CWM. (Overwrites the recovery partition).
This does not touch the system or boot partitions, only the recovery. I don't know if the phone stops booting with a broken recovery (should only prevent you from entering recovery).
Could you try pauls installer? Also, what firmware did you guys try it on? I have tried on the V10a and V10b from LG plus the MCR. (This will NOT work on the T-Mobile G2X).
EDIT: Since ROM Manager is supporting the O2X, you should use that instead.
*NOTICE* Samsung Galaxy GT-5570i mistake in title :S
Hi
Okay so the problem is my Samsung galaxy mini doesnt get detected by Odin v.4.85 but it gets detected in v.1.85. I've tried restarting the phone many times. All settings are set in the "Application" and USB debugg. All usb drivers are installed 100% with Samsung Kies.
Also tried reinstaling the drivers and other versions it still didnt work. Its 100% not the USB cable cuz it works perfectly fine when out of download mode and Kies recognizes the device.
I've tried rooting it with SuperOneClick also , that one gets stuck on one line...I've also tried through recovery mode but it didnt work either i got error, and interrupted.
Also a question : Is it possible to get clockworkmod and root without using Odin?
In any case theese info are needed:Android version is 2.3.6(i did not install this one it came with the phone) , Baseband version 25570IXXKL4, Kernel Version 2.6.35.7([email protected] #1), Build Number GINGERBREAD.IXXKL4
Looking forward to your answers
~Riste
http://forum.xda-developers.com/showthread.php?t=1576202
please go to above link and try that
Its okay i've rooted the phone now thank you guys...But now i have trouble getting clockworkmode... Any ideas :S?
ristex1 said:
Its okay i've rooted the phone now thank you guys...But now i have trouble getting clockworkmode... Any ideas :S?
Click to expand...
Click to collapse
Check this thread:
http://forum.xda-developers.com/showthread.php?t=1567101
kitrax59 said:
Check this thread:
http://forum.xda-developers.com/showthread.php?t=1567101
Click to expand...
Click to collapse
I've tried that one. But when i update from Android Recovery mode it enters CWM but after i try to apply the update it gives me error because such file or directory doesn't exist. So its same as i dont have cwm :S
~Riste
You dont og to flash update!!!
Go in CWM and install zip from sd-card.
ristex1 said:
I've tried that one. But when i update from Android Recovery mode it enters CWM but after i try to apply the update it gives me error because such file or directory doesn't exist. So its same as i dont have cwm :S
~Riste
Click to expand...
Click to collapse
Make sure the zip is downloaded properly.
Also choose install from SD card option not, apply update from SD.
i had the same problem while rooting it was due to version of android ex: 2.2FROYO , 2.3GINGERBREAD
i had 2.2 froyo stock and was trying the method of rooting 2.3GB .. now take a look at video and let know if it helps im sure it'll help.
http://www.youtube.com/watch?v=VQ4r9N0uMrU&feature=BFa&list=PLB7A7385718D23F15&lf=plpp_video
royalasif said:
i had the same problem while rooting it was due to version of android ex: 2.2FROYO , 2.3GINGERBREAD
i had 2.2 froyo stock and was trying the method of rooting 2.3GB .. now take a look at video and let know if it helps im sure it'll help.
v=VQ4r9N0uMrU&feature=BFa&list=PLB7A7385718D23F15&lf=plpp_video[/url]
Click to expand...
Click to collapse
That wouldn't help because my phone came with gengerbread 2.3.6 :S
freakyfriday said:
Make sure the zip is downloaded properly.
Also choose install from SD card option not, apply update from SD.
Click to expand...
Click to collapse
Did that also, it doesn't work...
ristex1 said:
That wouldn't help because my phone came with gengerbread 2.3.6 :S
Did that also, it doesn't work...
Click to expand...
Click to collapse
Well if your phone runs gingerbread 2.3.6 try this it shoul solve the problem
Link: http://forum.xda-developers.com/showthread.php?t=1576202
That must work read the instructions carefully.
<THOR> said:
You have try to use the update.zip and flash from recovery for get the root?
Click to expand...
Click to collapse
This method works and it's super easy to do.
<THOR> said:
@ristex1
I not have understand if you have rooted or not? if not, before of flash from recovery you must rename the package zip for rooting in update.zip or upd_1.zip (this should be right for your firmware) and then go in recovery and do apply update from sdcard and should works, if not if you not rename the package not works.
Click to expand...
Click to collapse
Yes i rooted the phone. Thank to that universal root zip.
But now in order to install Custom ROM's i need clockworkmod. I've been searching for days bricked my phone twice and still couldnt find any working cwm FOR SAMSUNG GT S5570I becouse this one and the GT s 5570 use diferent system...Thats what i learnt so far:S
~Best regards Riste!
I have tried to flash new CWM 6.0.1.5 (standart and touch), but there are 2 problems after update:
1. ADB driver in CWM mode is not found on my PC (LG-P990 in Device Manager).
2. Mount USB Storage doesn't work.
I have read that many people updated their CWM, but found only few posts about these problems (without answers).
Does it means that everything work fine for others, and I shoud look for solution in my PC?
Rom Manager
Kostja_V said:
I have tried to flash new CWM 6.0.1.5 (standart and touch), but there are 2 problems after update:
1. ADB driver in CWM mode is not found on my PC (LG-P990 in Device Manager).
2. Mount USB Storage doesn't work.
I have read that many people updated their CWM, but found only few posts about these problems (without answers).
Does it means that everything work fine for others, and I shoud look for solution in my PC?
Click to expand...
Click to collapse
It's easy... intall ROM Manager (free or not) from Play Store and click Flash ClockworkMod Recovery... that simple
Javiern said:
It's easy... intall ROM Manager (free or not) from Play Store and click Flash ClockworkMod Recovery... that simple
Click to expand...
Click to collapse
What is easy? O_O
I know how to install recovery via ROM Manager, adb, SmartFlash, nvflash and so on... The question was different.
CWM 6.0.1.5 is a ****
Kostja_V said:
What is easy? O_O
I know how to install recovery via ROM Manager, adb, SmartFlash, nvflash and so on... The question was different.
Click to expand...
Click to collapse
I have problems with the CWM 6.0.1.5 too, I flashed a new kernel with it and my phone did not boot any more.
I returned to CWM 5.0.2.8 and the kernel flash was successful.
In the CWM 6.0.1.5 the soft buttons does not work too. I can not go up, only down with soft buttons.
Kostja_V said:
I have tried to flash new CWM 6.0.1.5 (standart and touch), but there are 2 problems after update:
1. ADB driver in CWM mode is not found on my PC (LG-P990 in Device Manager).
2. Mount USB Storage doesn't work.
I have read that many people updated their CWM, but found only few posts about these problems (without answers).
Does it means that everything work fine for others, and I shoud look for solution in my PC?
Click to expand...
Click to collapse
Hey,
usb mounting isn't working for me either.
But adb is - it installed the driver automatically.
Maybe because I have installed my modded adb drivers?
Link: http://forum.xda-developers.com/showthread.php?t=1752074
tonyp said:
Hey,
usb mounting isn't working for me either.
But adb is - it installed the driver automatically.
Maybe because I have installed my modded adb drivers?
Link: http://forum.xda-developers.com/showthread.php?t=1752074
Click to expand...
Click to collapse
It was my firts idea, to check your modded driver, but no luck. It worked perfect with unofficial builds of CM10, but I can not even force it to install when phone is in CWM mode. Maybe Windows 8 is the culprit
Kostja_V said:
It was my firts idea, to check your modded driver, but no luck. It worked perfect with unofficial builds of CM10, but I can not even force it to install when phone is in CWM mode. Maybe Windows 8 is the culprit
Click to expand...
Click to collapse
Okay, yes - I'm still on Win7 as my external graphic card is currently lacking win8 drivers
Sent from my Nexus 7 using xda app-developers app
I've a very big problem: my smartphone (P990) doesn't boot and I've to backup all my data on INTERNAL SD.
I tried to connect the P990 on my laptop using USB mounting, but it doesn't work (as you show).
How can'I save my data? Is there any way to downgrade ClockWorkMod to a previous version? I remember you that my smartphone doesn't boot... PLEASE HELP ME!!! :crying:
I successfully installed adb drivers for clockworkmod recovery v6.0.1.5 by adding those lines to the file android_winusb.inf (from http://forum.xda-developers.com/showthread.php?t=1752074 other adb drivers might also work):
Code:
%LG_P990% = USB_Install, USB\VID_18D1&PID_D001&REV_0227
%LG_P990% = USB_Install, USB\VID_18D1&PID_D001
Hello, i just bought an LG Optimus 2x p-990, the first thing i did was updating to official ICS, but similar to my previous phone, i cant stand the stock rom and wanted to flash a custom one (havnt decided yet witch rom i want). After some trouble i finally rooted my phone, but now im stuck at trying to flash a new recovery. When i try flashing it through rom manager it says the device hast an official recovery yet, and when i try flashing this (http://forum.xda-developers.com/showthread.php?t=1098745) (note: i have usb debugging on and when i run it super user notifys that was given permision to shell) the cmd prompt opens for some seconds and closes again, and when i try to boot into recovery it goes to the stock recovery that wipes my phone.
Maybe this has been answered in here but believe me when i say i searched for the answer extensivly.
Hope i can get some help.
make it simple,install rom manager then install recovery..
I explained that i can not do it. ROM manager says the device is not listed and when i try to manually install the recovery it says permission denied.
Download and install nvflash driver(often called ATX) and install it. Then dl AIO all in one tool,from there you can install Cwm(can also be nvflashed) You can't use rom manager as it's not compatible with the new bootloader and partition table
Sent from the new smoothly LGP990
SuperSkill said:
Download and install nvflash driver(often called ATX) and install it. Then dl AIO all in one tool,from there you can install Cwm(can also be nvflashed) You can't use rom manager as it's not compatible with the new bootloader and partition table
Sent from the new smoothly LGP990
Click to expand...
Click to collapse
I have used Nvflash to root my phone, but what Aio tool is that? thanks
cesarib said:
I have used Nvflash to root my phone, but what Aio tool is that? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1969797
This one, by rmein.
I downloaded the one first listed, at 218.14MB and it worked a treat.
Its done ^^ the AIO tool the the job perfectly. i think my device wasnt properly rooted. thank you so much.
I know it's solved but moved it as didn't belong in General. Please post in the correct section when asking questions/for help.
Thanks
AvRS
Hi, I have trouble while installing 2.1 update with CWM recovery (can not install .zip file). I hear that we must use Stock Recovery to install Nokia update; I've installed many apps + been lazy for backup all their data files so I don't want to flash the Stock Rom. Is there any way to flash Stock Boot Recovery only?
I've found some .img files in RM-1013 Rom folder, their names are "user_boot.img" and "user_recovery.img",do these files handle Stock Boot + Stock Boot Recovery?
<sorry for my English>
kienbb said:
Hi, I have trouble while installing 2.1 update with CWM recovery (can not install .zip file). I hear that we must use Stock Recovery to install Nokia update; I've installed many apps + been lazy for backup all their data files so I don't want to flash the Stock Rom. Is there any way to flash Stock Boot Recovery only?
I've found some .img files in RM-1013 Rom folder, their names are "user_boot.img" and "user_recovery.img",do these files handle Stock Boot + Stock Boot Recovery?
<sorry for my English>
Click to expand...
Click to collapse
Yes, you can use user_recovery.img and flash it to your phone using fastboot.
I need your help
Dom3616 said:
Yes, you can use user_recovery.img and flash it to your phone using fastboot.
Click to expand...
Click to collapse
Thanks man :good:, I've updated to 2.1 but my X2 is unrooted now :crying: so I'm planning to update a custom file by modifying the 2.1 patch downloaded from Nokia. Although I've read many threads about modifying/creating a flashable .zip file (use Stock Boot Recovery to flash), I'm not be able to do it; it requires coding knowledge (editing scripts in META-INF, binary... blah blah) :crying:
Can you help or suggest me anything about this?
The link to patch file can be found in a catalog.xml file which would be deleted after update; I found this file in both phone memory and sd card while downloading patch file by using phone updater, it is attached below.
Here is the link to my patch file (signed with my product code)
h--ttp://download.update.nokia.com/public/p/d/fds_swupdate/1408/1518/4030/145209948/RM-1013_FOTA_2.0.0.11_2.1.0.11_059W0W0_001_001.diff.zip
My wish is I could install google apps and (maybe or not) keep the su binary to keep Device rooted by this method.
Sorry for bothering you, I'm just a curious user wants to understand my Android device and I know you're master at this :good:
Wating your reply Dom.
kienbb said:
Thanks man :good:, I've updated to 2.1 but my X2 is unrooted now :crying: so I'm planning to update a custom file by modifying the 2.1 patch downloaded from Nokia. Although I've read many threads about modifying/creating a flashable .zip file (use Stock Boot Recovery to flash), I'm not be able to do it; it requires coding knowledge (editing scripts in META-INF, binary... blah blah) :crying:
Can you help or suggest me anything about this?
The link to patch file can be found in a catalog.xml file which would be deleted after update; I found this file in both phone memory and sd card while downloading patch file by using phone updater, it is attached below.
Here is the link to my patch file (signed with my product code)
h--ttp://download.update.nokia.com/public/p/d/fds_swupdate/1408/1518/4030/145209948/RM-1013_FOTA_2.0.0.11_2.1.0.11_059W0W0_001_001.diff.zip
My wish is I could install google apps and (maybe or not) keep the su binary to keep Device rooted by this method.
Sorry for bothering you, I'm just a curious user wants to understand my Android device and I know you're master at this :good:
Wating your reply Dom.
Click to expand...
Click to collapse
I can help you with that. But why don't you update and then try the same method again to root? That'll be quite easy, my friend.
Because there is noway to root a 2.1 X2 now :crying:
Dom3616 said:
I can help you with that. But why don't you update and then try the same method again to root? That'll be quite easy, my friend.
Click to expand...
Click to collapse
I'm waiting for new root method and want to do some thing this time
It is so boring for me looking at a non-(saved)game X2 xD
I'd better downgrade to 2.0 and wait, ty Dom. :good:
kienbb said:
I'm waiting for new root method and want to do some thing this time
It is so boring for me looking at a non-(saved)game X2 xD
I'd better downgrade to 2.0 and wait, ty Dom. :good:
Click to expand...
Click to collapse
There is a much easier way. Flash CWM Recovery for X2 and flash any superuser recovery zip from the internet. Try it.
Thank you Dom but there is no hope for this 2.1 update
Dom3616 said:
There is a much easier way. Flash CWM Recovery for X2 and flash any superuser recovery zip from the internet. Try it.
Click to expand...
Click to collapse
Thers is a CWM Recovery works well on X2 2.0 but it doesnt work on 2.1 update.
I've tried to use adb to flash .img file but adb cant find my device :v. I've installed all X2 drivers, the phone is detected well, all components are installed but adb usb composite driver is not listed in device manager, I'm using Windows 7 Ultimate 64 bit.
I've tried connecting my device to a Windows 8 PC, after installing driver pack used on Win7 my X2 is detected well but adb usb composite driver is still not installed, Win 8 detects 1 new device more than in Win 7 but there is no driver for it in driver pack
I used Google Usb Driver pack (downloaded by SDK Manager) and Nokia X usb driver pack.
No hope for this 2.1 update :v
Now I'm reading about .zip files usable with Stock Recovery :crying:
kienbb said:
Thers is a CWM Recovery works well on X2 2.0 but it doesnt work on 2.1 update.
I've tried to use adb to flash .img file but adb cant find my device :v. I've installed all X2 drivers, the phone is detected well, all components are installed but adb usb composite driver is not listed in device manager, I'm using Windows 7 Ultimate 64 bit.
I've tried connecting my device to a Windows 8 PC, after installing driver pack used on Win7 my X2 is detected well but adb usb composite driver is still not installed, Win 8 detects 1 new device more than in Win 7 but there is no driver for it in driver pack
I used Google Usb Driver pack (downloaded by SDK Manager) and Nokia X usb driver pack.
No hope for this 2.1 update :v
Now I'm reading about .zip files usable with Stock Recovery :crying:
Click to expand...
Click to collapse
I know that issue. Basically, Nokia drivers havent been updated.
But there is a way. Send me the link to the device drivers for X2.
Next, Open Device Manager and you'll see a yellow exclamation mark beside your device name.
Open your device and click properties. Then goto Detail and search for Compatible IDs something.
Send me those IDs and I'll update the drivers for you.
Feel free to PM me.
U're sweet Dom
Dom3616 said:
Open Device Manager and you'll see a yellow exclamation mark beside your device name.
Click to expand...
Click to collapse
As I said my PC OS installed all components from driver pack (as it can) and doesn't see any new device (there's not any symbol in the device list manager :crying. I might switch to Windows 8 if want to see it (Win 7 sucks :v).
I thought about this way to root 2.1 X2:
1. Root it at 2.0
2. Back up Supersu with ZIPme (app from who creates Busybox + Rom Toolbox, I think it's safe :v) so I can use it with Stock Recovery
3. Unroot
4. Update to 2.1
5. Recover Supersu
Do you think it works?
If I could use adb, it wouldn't be this complex. Ty again Dom :good:
kienbb said:
As I said my PC OS installed all components from driver pack (as it can) and doesn't see any new device (there's not any symbol in the device list manager :crying. I might switch to Windows 8 if want to see it (Win 7 sucks :v).
I thought about this way to root 2.1 X2:
1. Root it at 2.0
2. Back up Supersu with ZIPme (app from who creates Busybox + Rom Toolbox, I think it's safe :v) so I can use it with Stock Recovery
3. Unroot
4. Update to 2.1
5. Recover Supersu
Do you think it works?
If I could use adb, it wouldn't be this complex. Ty again Dom :good:
Click to expand...
Click to collapse
I wouldnt advise you to try that. Many users have reported bricking when trying to root on 2.1.
I gonna do it
Dom3616 said:
I wouldnt advise you to try that. Many users have reported bricking when trying to root on 2.1.
Click to expand...
Click to collapse
I think it will work if files location doesn't change.
Gonna tell you later if I success
kienbb said:
I think it will work if files location doesn't change.
Gonna tell you later if I success
Click to expand...
Click to collapse
Sure do.