[Q] Question about CWM 6.0.1.5 - LG Optimus 2x

I have tried to flash new CWM 6.0.1.5 (standart and touch), but there are 2 problems after update:
1. ADB driver in CWM mode is not found on my PC (LG-P990 in Device Manager).
2. Mount USB Storage doesn't work.
I have read that many people updated their CWM, but found only few posts about these problems (without answers).
Does it means that everything work fine for others, and I shoud look for solution in my PC?

Rom Manager
Kostja_V said:
I have tried to flash new CWM 6.0.1.5 (standart and touch), but there are 2 problems after update:
1. ADB driver in CWM mode is not found on my PC (LG-P990 in Device Manager).
2. Mount USB Storage doesn't work.
I have read that many people updated their CWM, but found only few posts about these problems (without answers).
Does it means that everything work fine for others, and I shoud look for solution in my PC?
Click to expand...
Click to collapse
It's easy... intall ROM Manager (free or not) from Play Store and click Flash ClockworkMod Recovery... that simple

Javiern said:
It's easy... intall ROM Manager (free or not) from Play Store and click Flash ClockworkMod Recovery... that simple
Click to expand...
Click to collapse
What is easy? O_O
I know how to install recovery via ROM Manager, adb, SmartFlash, nvflash and so on... The question was different.

CWM 6.0.1.5 is a ****
Kostja_V said:
What is easy? O_O
I know how to install recovery via ROM Manager, adb, SmartFlash, nvflash and so on... The question was different.
Click to expand...
Click to collapse
I have problems with the CWM 6.0.1.5 too, I flashed a new kernel with it and my phone did not boot any more.
I returned to CWM 5.0.2.8 and the kernel flash was successful.
In the CWM 6.0.1.5 the soft buttons does not work too. I can not go up, only down with soft buttons.

Kostja_V said:
I have tried to flash new CWM 6.0.1.5 (standart and touch), but there are 2 problems after update:
1. ADB driver in CWM mode is not found on my PC (LG-P990 in Device Manager).
2. Mount USB Storage doesn't work.
I have read that many people updated their CWM, but found only few posts about these problems (without answers).
Does it means that everything work fine for others, and I shoud look for solution in my PC?
Click to expand...
Click to collapse
Hey,
usb mounting isn't working for me either.
But adb is - it installed the driver automatically.
Maybe because I have installed my modded adb drivers?
Link: http://forum.xda-developers.com/showthread.php?t=1752074

tonyp said:
Hey,
usb mounting isn't working for me either.
But adb is - it installed the driver automatically.
Maybe because I have installed my modded adb drivers?
Link: http://forum.xda-developers.com/showthread.php?t=1752074
Click to expand...
Click to collapse
It was my firts idea, to check your modded driver, but no luck. It worked perfect with unofficial builds of CM10, but I can not even force it to install when phone is in CWM mode. Maybe Windows 8 is the culprit

Kostja_V said:
It was my firts idea, to check your modded driver, but no luck. It worked perfect with unofficial builds of CM10, but I can not even force it to install when phone is in CWM mode. Maybe Windows 8 is the culprit
Click to expand...
Click to collapse
Okay, yes - I'm still on Win7 as my external graphic card is currently lacking win8 drivers
Sent from my Nexus 7 using xda app-developers app

I've a very big problem: my smartphone (P990) doesn't boot and I've to backup all my data on INTERNAL SD.
I tried to connect the P990 on my laptop using USB mounting, but it doesn't work (as you show).
How can'I save my data? Is there any way to downgrade ClockWorkMod to a previous version? I remember you that my smartphone doesn't boot... PLEASE HELP ME!!! :crying:

I successfully installed adb drivers for clockworkmod recovery v6.0.1.5 by adding those lines to the file android_winusb.inf (from http://forum.xda-developers.com/showthread.php?t=1752074 other adb drivers might also work):
Code:
%LG_P990% = USB_Install, USB\VID_18D1&PID_D001&REV_0227
%LG_P990% = USB_Install, USB\VID_18D1&PID_D001

Related

[Streak7][Streak10][Guide]Rooting Your Device

Announcement:
Superuser7.zip is now Superuser.zip
What was previously called Superuser.zip is renamed to Superuser-legacy.zip
The instructions and links below have been updated to reflect this.
Click to expand...
Click to collapse
How to flash a zip:
Streak 7:
Entering recovery mode on device -XDA wiki
Streak 10:
Entering recovery mode on device -XDA wiki
Both Devices:
Flashing an update.zip with custom recovery - XDA wiki
Click to expand...
Click to collapse
Requirements:
A custom recovery:
Clockwork Mod 6.0 (or newer)
Team Win Recovery Project 2.2 (or newer)
Click to expand...
Click to collapse
Install instructions:
Download: Superuser.zip
Copy Superuser.zip to SD card
Reboot into custom recovery mod
Select "update from update.zip"
Navigate to superuser.zip
Flash
Finished
Click to expand...
Click to collapse
Included components:
Superuser 3.1.3 (46)
SU binary 3.1.1 (17)
Busybox 1.20.2
Click to expand...
Click to collapse
Changelog:
Jul 21 2012: Updated instructions
Jul 20 2012: Superuser7 is now Superuser - Updated to Busybox 1.20.2
Release based on superuser (20712)
Release based on superuser (20703)
Release based on superuser (20629)
Jan 20 2012: Fixed installer binary (20120)
Release based on superuser (11228)
Release based on superuser (11216)
Release based on superuser (11001)
Click to expand...
Click to collapse
2char
Thanks. I was able to use these instructions to root my newly updated Streak 7.
Thank you...
Clear, easy to follow and success at the end... what else ???
I must be having a blonde moment. But how do I boot into cwm recovery w/o root already? I have cwm installed but of course I can't flash cwm recovery w/o root. And stock recovery of course won't let me upgrade with the too pkg. I appreciate any help in my obvious dumb ass moment here lol!
Sent from my Dell Streak 7 using xda premium
how do you have cwm installed if you cant flash it?
Put your device into fastboot mode and flash the correct CWM.
CWM 3.0 if you're on 2.2.x
CWM 4.0 if you're on 3.2
there are directions to flash each one on their respective pages (they're flashed in the same manner btw, just I wrote one guide and graffixnyc wrote the other one i believe)
Oh ok I see. I was thinking flash thru recovery not Dearborn. Duh huh. Thx Nanni, much appreciated. And I meant I have cwm installed but no cwm recovery flashed yet.
Sent from my Dell Streak 7 using xda premium
sorry guys been at it since yesterday... can't find clockwork img file. Not to mention adb isnt working thru cmd prompt either. Any other method to root like ginger break?
Wow, it took like 45 minutes to root my thunderbolt, once my streak comes in I'll be on this asap
You should have killed me, when you had the chance
Looks nice. Now I guess I need to figure out how to upgrade from my 2.2.2 root with tweaks to HC without messing it up.
i did everything but i use the clockworkmod 5 XXX something and install the superuser7.zip the only icon i got is the superuser but this 3 is not in there how come?
SU binary 3.0
Bash 4.1
Busybox 1.19.2
thank you
Okay, I guess I don't get "Have Clockwork mod 4.0.1.4 installed" part. Don't you have to be rooted to get CWM installed? What am I missing?
In CWM 4 my External SD was seen, now that I installed 5 revB, it could not mount SD card. I moved superuser7 to internal and ran it, went through, but no root x4 times. Not sure if 5 is ready for prime time.
ExploreMN said:
Okay, I guess I don't get "Have Clockwork mod 4.0.1.4 installed" part. Don't you have to be rooted to get CWM installed? What am I missing?
Click to expand...
Click to collapse
Did you get any solution for that Cach 22 problem? CWM must be installed to root your device but to install it your device must be fully rooted!!! It is like a question about what was first - egg or a chicken?
Finally got clockworkmod flashed, now
I keep getting "E:can't mount /sdcard/"
Was able to root from internal sdcard.
Every guide on web seize “to install CWM you must have your device rooted already” you are telling to root I must have CWM installed. What is I am not understanding?
Why you guys are making those guides understandable only for yourself or for guys they already know everything about the subject?
Because you dont need to be rooted to install it, nowhere does it say you need to be rooted to install it.
Give me just one link to the CWM installation page which is not requesting previous rooting, please.
The one RIGHT BELOW this one [Guide][Recovery]Clockwork Mod 5.0.2.7
All you need is to enter fastboot mode.
wolski, it isn't explained very well. You need to use fastboot to flash clockworkmod before the streak is rooted. This requires installing drivers which will support fastboot, and they DON'T install correctly the majority of the time under win7. You need to run around to several threads to figure out what you need to do.
Once you've got fastboot drivers installed and working (which may require the android SDK and/or Dell's PC suite), and downloaded the fastboot command, and downloaded the clockworkmod image, then you can boot the streak into fastboot mode (power and volume down), and use the command line to flash CWM to the streak. However, in my case (and others), CWM 5.0 won't recognize your SD card. I WAS able to copy the file to the internal SD, and install superuser7.zip from there.
If someone had actually taken the time to explain all of this, instead of acting like it's things you should already know, a lot of people could have saved a lot of time.
magicland said:
wolski, it isn't explained very well. You need to use fastboot to flash clockworkmod before the streak is rooted. This requires installing drivers which will support fastboot, and they DON'T install correctly the majority of the time under win7. You need to run around to several threads to figure out what you need to do.
Once you've got fastboot drivers installed and working (which may require the android SDK and/or Dell's PC suite), and downloaded the fastboot command, and downloaded the clockworkmod image, then you can boot the streak into fastboot mode (power and volume down), and use the command line to flash CWM to the streak. However, in my case (and others), CWM 5.0 won't recognize your SD card. I WAS able to copy the file to the internal SD, and install superuser7.zip from there.
If someone had actually taken the time to explain all of this, instead of acting like it's things you should already know, a lot of people could have saved a lot of time.
Click to expand...
Click to collapse
Thank you very much. That clears a lot. As i said before - most of those guys are making those so called guides for them self. It must be same kind of mental illness. TheManiak is a perfect example.

Need help guys.......

Before some day I sent my o2x to service center due to some camera related problem......When I got back mah o2x,it was completly reset and they have installed the sucking lg rom......Now. I have rooted my phone by super one click but facing a big problem,I can't install cwm.I have tried my best but failed.....removed and reinstalled the driver and all driver has been installed succesfully but still when i try to install the cwm it shows usb device not found.....I also have changed the baseband.........The baseband changes as usual process,but the cwm is not installing........need help guys plzzzzz..........
Hmm try Flashing CWM with the ROM Manager app. 5.0.2.0 works fine with me...
Agreed, try with ROM manager
Are you sure that you have root?
Try and check "debugging" in settings
Install recovery with terminal (local on phone, not computer)
SP1996AC said:
Hmm try Flashing CWM with the ROM Manager app. 5.0.2.0 works fine with me...
Click to expand...
Click to collapse
Yup it worked........Thanks............Now I can install my custom rom's again...........
HerrKuk said:
Agreed, try with ROM manager
Are you sure that you have root?
Try and check "debugging" in settings
Install recovery with terminal (local on phone, not computer)
Click to expand...
Click to collapse
Hmmmmmm solved the problem with rom manager........yup i have checked my device is rooted......and debugging is on......
Can you change the thread's name to "solved"?

[Q] getprop errors while installing a ROM via CWM?

I rooted, then unlocked the phone, then went installing the CWM contained in the "all in one tool" thing in the development forum for our device. Sadly, I cant seem to install any ROM, I always initially get some sort of getprop error? Any ideas?
voon said:
I rooted, then unlocked the phone, then went installing the CWM contained in the "all in one tool" thing in the development forum for our device. Sadly, I cant seem to install any ROM, I always initially get some sort of getprop error? Any ideas?
Click to expand...
Click to collapse
What version of CWM is installed ?
You need 6.0.3.1 to install custom roms.
Cuniek said:
What version of CWM is installed ?
You need 6.0.3.1 to install custom roms.
Click to expand...
Click to collapse
6.0.2.8 .... I before tried the thing from the CWM thread, with this warning of not working on V20 beta something, installed by an apk? That one was not bootable before and sort of rendered my phone dead, as it woul dnot boot into the installed LG ROM as well after I tried the install. I had to do an emergency reinstall of LGs own ROM with the LG Support Tool ... so I don't trust that CWM there ..... I'm not sure, which ones will work on my Euro P880.
voon said:
6.0.2.8 .... I before tried the thing from the CWM thread, with this warning of not working on V20 beta something, installed by an apk? That one was not bootable before and sort of rendered my phone dead, as it woul dnot boot into the installed LG ROM as well after I tried the install. I had to do an emergency reinstall of LGs own ROM with the LG Support Tool ... so I don't trust that CWM there ..... I'm not sure, which ones will work on my Euro P880.
Click to expand...
Click to collapse
Use this:
http://db.tt/nNduvjs2
Cuniek said:
Use this:
http://db.tt/nNduvjs2
Click to expand...
Click to collapse
Ok ... how? I'm only used to CWM installers, that do this scripted ... I'm not sure what to do with the image?
voon said:
Ok ... how? I'm only used to CWM installers, that do this scripted ... I'm not sure what to do with the image?
Click to expand...
Click to collapse
Do u have any workable rom installed ?
You can download Rom Manager from play store and then download and install cwm 6.0.3.1. from rom manager
Nope ... ROM is broken. I can't even put the original LG ROM on it ... the LG USB drivers seem not compatible with W8.
voon said:
Nope ... ROM is broken. I can't even put the original LG ROM on it ... the LG USB drivers seem not compatible with W8.
Click to expand...
Click to collapse
Have you tried to run LG Support Tool as Administrator - it helped me to install original LG ROM
Ok, managed to do it somehow ... it's installing by means of emergency install ... I hope it runs through
voon said:
Nope ... ROM is broken. I can't even put the original LG ROM on it ... the LG USB drivers seem not compatible with W8.
Click to expand...
Click to collapse
they're compatible, but it's a hassle to make them work. you gotta reinstall your drivers every time you need to use S/W mode, and after you install, check device manager, some components are installed as unrecognized, you gotta update driver -> automatic search.
After you unlock your bootloader how to install CWM 6.0.3.1
Download the tool ,,
http://d-h.st/HFR
extract the folder
open the folder
find file with name: O4X_CWM.img
rename it to something else e.g. O4X_CWM_old.img
Download new cwm (i gave you link before, but here is another
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.3.1-p880.img
put recovery-clockwork-touch-6.0.3.1-p880.img file in the same folder as your renamed file (O4X_CWM_old.img)
rename recovery-clockwork-touch-6.0.3.1-p880.img to O4X_CWM.img
Right click on "[All-In-One][P880].bat" choose run as administrator
The tool will ask you if you have the drivers ,, install them if you don't have .
The tool will show you 8 options .
In your phone go to Settings/Developer Options/Check "USB Debugging" ,,
then connect phone .
choose CWM Recovery option.
wait for complete
disconnect phone
Turn off phone
Turn on phone with vol down pressed.
It should load cwm 6.0.3.1
It worked on my phone, good luck
Whopeee ... operation successful! I can finally install the rom The touch feature of that CWM is reall yfantastic .. no more crazy volume button rocking. Thanks much!
To sum up what I did in short:
- Started with Euro 4.1.2 LG original ROM.
- Press Power/Vol Down to get into the tiny original blue Menu
- Chose install by ADB
- used the root package for 4.1.2 (small thing linked in here), just ran root.bat in a administrator cmd shell on windows --> rooted phone
- Unlocked phone using the cat & echo of the file named in here --> unlocked
- Used the all in one tool with the new CWM file to install the CWM
Now to check out those roms.... I hope one of them is sophisticated enough not to be a crazy battery eater and heat producer...
(man, these guessing games on which info on here is accurate every few months drives me completely crazy..... but in the end it's great)

[Q] Is there any way to boot to Stock Boot Recovery without flash Stock Rom?

Hi, I have trouble while installing 2.1 update with CWM recovery (can not install .zip file). I hear that we must use Stock Recovery to install Nokia update; I've installed many apps + been lazy for backup all their data files so I don't want to flash the Stock Rom. Is there any way to flash Stock Boot Recovery only?
I've found some .img files in RM-1013 Rom folder, their names are "user_boot.img" and "user_recovery.img",do these files handle Stock Boot + Stock Boot Recovery?
<sorry for my English>
kienbb said:
Hi, I have trouble while installing 2.1 update with CWM recovery (can not install .zip file). I hear that we must use Stock Recovery to install Nokia update; I've installed many apps + been lazy for backup all their data files so I don't want to flash the Stock Rom. Is there any way to flash Stock Boot Recovery only?
I've found some .img files in RM-1013 Rom folder, their names are "user_boot.img" and "user_recovery.img",do these files handle Stock Boot + Stock Boot Recovery?
<sorry for my English>
Click to expand...
Click to collapse
Yes, you can use user_recovery.img and flash it to your phone using fastboot.
I need your help
Dom3616 said:
Yes, you can use user_recovery.img and flash it to your phone using fastboot.
Click to expand...
Click to collapse
Thanks man :good:, I've updated to 2.1 but my X2 is unrooted now :crying: so I'm planning to update a custom file by modifying the 2.1 patch downloaded from Nokia. Although I've read many threads about modifying/creating a flashable .zip file (use Stock Boot Recovery to flash), I'm not be able to do it; it requires coding knowledge (editing scripts in META-INF, binary... blah blah) :crying:
Can you help or suggest me anything about this?
The link to patch file can be found in a catalog.xml file which would be deleted after update; I found this file in both phone memory and sd card while downloading patch file by using phone updater, it is attached below.
Here is the link to my patch file (signed with my product code)
h--ttp://download.update.nokia.com/public/p/d/fds_swupdate/1408/1518/4030/145209948/RM-1013_FOTA_2.0.0.11_2.1.0.11_059W0W0_001_001.diff.zip
My wish is I could install google apps and (maybe or not) keep the su binary to keep Device rooted by this method.
Sorry for bothering you, I'm just a curious user wants to understand my Android device and I know you're master at this :good:
Wating your reply Dom.
kienbb said:
Thanks man :good:, I've updated to 2.1 but my X2 is unrooted now :crying: so I'm planning to update a custom file by modifying the 2.1 patch downloaded from Nokia. Although I've read many threads about modifying/creating a flashable .zip file (use Stock Boot Recovery to flash), I'm not be able to do it; it requires coding knowledge (editing scripts in META-INF, binary... blah blah) :crying:
Can you help or suggest me anything about this?
The link to patch file can be found in a catalog.xml file which would be deleted after update; I found this file in both phone memory and sd card while downloading patch file by using phone updater, it is attached below.
Here is the link to my patch file (signed with my product code)
h--ttp://download.update.nokia.com/public/p/d/fds_swupdate/1408/1518/4030/145209948/RM-1013_FOTA_2.0.0.11_2.1.0.11_059W0W0_001_001.diff.zip
My wish is I could install google apps and (maybe or not) keep the su binary to keep Device rooted by this method.
Sorry for bothering you, I'm just a curious user wants to understand my Android device and I know you're master at this :good:
Wating your reply Dom.
Click to expand...
Click to collapse
I can help you with that. But why don't you update and then try the same method again to root? That'll be quite easy, my friend.
Because there is noway to root a 2.1 X2 now :crying:
Dom3616 said:
I can help you with that. But why don't you update and then try the same method again to root? That'll be quite easy, my friend.
Click to expand...
Click to collapse
I'm waiting for new root method and want to do some thing this time
It is so boring for me looking at a non-(saved)game X2 xD
I'd better downgrade to 2.0 and wait, ty Dom. :good:
kienbb said:
I'm waiting for new root method and want to do some thing this time
It is so boring for me looking at a non-(saved)game X2 xD
I'd better downgrade to 2.0 and wait, ty Dom. :good:
Click to expand...
Click to collapse
There is a much easier way. Flash CWM Recovery for X2 and flash any superuser recovery zip from the internet. Try it.
Thank you Dom but there is no hope for this 2.1 update
Dom3616 said:
There is a much easier way. Flash CWM Recovery for X2 and flash any superuser recovery zip from the internet. Try it.
Click to expand...
Click to collapse
Thers is a CWM Recovery works well on X2 2.0 but it doesnt work on 2.1 update.
I've tried to use adb to flash .img file but adb cant find my device :v. I've installed all X2 drivers, the phone is detected well, all components are installed but adb usb composite driver is not listed in device manager, I'm using Windows 7 Ultimate 64 bit.
I've tried connecting my device to a Windows 8 PC, after installing driver pack used on Win7 my X2 is detected well but adb usb composite driver is still not installed, Win 8 detects 1 new device more than in Win 7 but there is no driver for it in driver pack
I used Google Usb Driver pack (downloaded by SDK Manager) and Nokia X usb driver pack.
No hope for this 2.1 update :v
Now I'm reading about .zip files usable with Stock Recovery :crying:
kienbb said:
Thers is a CWM Recovery works well on X2 2.0 but it doesnt work on 2.1 update.
I've tried to use adb to flash .img file but adb cant find my device :v. I've installed all X2 drivers, the phone is detected well, all components are installed but adb usb composite driver is not listed in device manager, I'm using Windows 7 Ultimate 64 bit.
I've tried connecting my device to a Windows 8 PC, after installing driver pack used on Win7 my X2 is detected well but adb usb composite driver is still not installed, Win 8 detects 1 new device more than in Win 7 but there is no driver for it in driver pack
I used Google Usb Driver pack (downloaded by SDK Manager) and Nokia X usb driver pack.
No hope for this 2.1 update :v
Now I'm reading about .zip files usable with Stock Recovery :crying:
Click to expand...
Click to collapse
I know that issue. Basically, Nokia drivers havent been updated.
But there is a way. Send me the link to the device drivers for X2.
Next, Open Device Manager and you'll see a yellow exclamation mark beside your device name.
Open your device and click properties. Then goto Detail and search for Compatible IDs something.
Send me those IDs and I'll update the drivers for you.
Feel free to PM me.
U're sweet Dom
Dom3616 said:
Open Device Manager and you'll see a yellow exclamation mark beside your device name.
Click to expand...
Click to collapse
As I said my PC OS installed all components from driver pack (as it can) and doesn't see any new device (there's not any symbol in the device list manager :crying. I might switch to Windows 8 if want to see it (Win 7 sucks :v).
I thought about this way to root 2.1 X2:
1. Root it at 2.0
2. Back up Supersu with ZIPme (app from who creates Busybox + Rom Toolbox, I think it's safe :v) so I can use it with Stock Recovery
3. Unroot
4. Update to 2.1
5. Recover Supersu
Do you think it works?
If I could use adb, it wouldn't be this complex. Ty again Dom :good:
kienbb said:
As I said my PC OS installed all components from driver pack (as it can) and doesn't see any new device (there's not any symbol in the device list manager :crying. I might switch to Windows 8 if want to see it (Win 7 sucks :v).
I thought about this way to root 2.1 X2:
1. Root it at 2.0
2. Back up Supersu with ZIPme (app from who creates Busybox + Rom Toolbox, I think it's safe :v) so I can use it with Stock Recovery
3. Unroot
4. Update to 2.1
5. Recover Supersu
Do you think it works?
If I could use adb, it wouldn't be this complex. Ty again Dom :good:
Click to expand...
Click to collapse
I wouldnt advise you to try that. Many users have reported bricking when trying to root on 2.1.
I gonna do it
Dom3616 said:
I wouldnt advise you to try that. Many users have reported bricking when trying to root on 2.1.
Click to expand...
Click to collapse
I think it will work if files location doesn't change.
Gonna tell you later if I success
kienbb said:
I think it will work if files location doesn't change.
Gonna tell you later if I success
Click to expand...
Click to collapse
Sure do.

[Q] bootloop in cyanogen 10.1

a few days ago i dropped my galaxy s2 in the toilet(dont laugh) so i went to using my brother's old s plus I9001.
long story short,i tried to upgrade the 2.3.3 to a 4.2.2 Jellybean using this guide : http://au.ibtimes.com/articles/4579...alaxy-s-plus-i9001-android-4.htm#.VAWoGfmSzGA
i searched a few other guides beforehand,most of which stated that i need a rooted phone,so i rooted it using a guide i found on this forum(here : http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001)
this is everything i did :
1. Connect the Galaxy S Plus to your computer.
2. Unrar the CM 10.1 firmware RAR file you have downloaded
3. Copy the CM 10.1 firmware you have extracted from the unrar file to the SD card of your phone.
4. Turn off the Galaxy S Plus.
5. Reboot the device into Recovery mode. Press Volume up + Home + Power keys simultaneously. You can flash this ROM using the stock recovery or a custom recovery app.
6. In the Recovery mode, select "wipe data/factory reset" and "wipe cache partition."
7. Then select "install zip from SD card" and "choose zip from SD card." Search for the firmware you have copied on the device.
8. Select the firmware file and install it.
9. Go back and select "reboot system now."
so everything went well,until i tried rebooting the device.im stuck now at the cyanogenmod logo.basically i have a boot loop isue.
being a noob at these kind of things,my first thought was that my phone had bircked,so i followed an unbricking tutorialobviously,it didnt work.
can you please help me solve this bootloop s**t? :good::good:
First of all flash TWRP (Recovery).
Then download CM 10.2 from here and copy it in your internal SD card.
Boot into Recovery.
Do a Data & Cache wipe and finally flash CM 10.2.
Optionally: Flash Gapps (Google Apps)
Also read this.
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
dr.otcopusseh said:
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
Click to expand...
Click to collapse
Boot into Recovery and go to mounts and storage.
Then connect your device to your computer and select mount USB storage.
dr.otcopusseh said:
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
Click to expand...
Click to collapse
kalpetros said:
First of all flash TWRP (Recovery).
Then download CM 10.2 from here and copy it in your internal SD card.
Boot into Recovery.
Do a Data & Cache wipe and finally flash CM 10.2.
Optionally: Flash Gapps (Google Apps)
Also read this.
Click to expand...
Click to collapse
thanks for the reply,but there is a problem.i cant acces my phones memory(or copy anything on it) because its shut down.ive tried with samsung kies,but it still doesnt work.
sorry for posting again,but i wasnt sure if you'd see this without me replying to you
See my answer above.
kalpetros said:
Boot into Recovery and go to mounts and storage.
Then connect your device to your computer and select mount USB storage.
Click to expand...
Click to collapse
i flashed twrp and i downloaded cm10.2,but now when i boot into recovery(volume up+power) it shows me the twrp menu,and the usb mounting doesnt work anymore.i press mount>mount usb storage>connect the usb cable,and nothing happens.
dr.otcopusseh said:
i flashed twrp and i downloaded cm10.2,but now when i boot into recovery(volume up+power) it shows me the twrp menu,and the usb mounting doesnt work anymore.i press mount>mount usb storage>connect the usb cable,and nothing happens.
Click to expand...
Click to collapse
Then download CWM Recovery and try it again.
Remember to flash TWRP after that.
kalpetros said:
Then download and try it again.
Remember to flash TWRP after that.
Click to expand...
Click to collapse
but i cant get cmw recovery on my phone if i cant acces the memory :/
try using Aroma File Manager here http://forum.xda-developers.com/showthread.php?t=1646108 it won't install to your phone, it's a temporary file manager that you flash in recovery.
the problem is that i cant copy anything on my sd card,because my computer doesnt recognize the phone anymore after flashing twrp
dr.otcopusseh said:
but i cant get cmw recovery on my phone if i cant acces the memory :/
Click to expand...
Click to collapse
Flash CWM Recovery using Odin.
Read this (How to install ODIN Version).
Download the following:
Odin
CWM Recovery
AriesVE.ops
If it still doesn't work I suggest you to go back to stock and repeat the procedure.
kalpetros said:
Flash CWM Recovery using Odin.
Read this.
Click to expand...
Click to collapse
im trying to flash with odin,but i cant find any .ops in the cw zip.
i even tried downloading other cw versions,but none of them have .ops..
dr.otcopusseh said:
im trying to flash with odin,but i cant find any .ops in the cw zip.
i even tried downloading other cw versions,but none of them have .ops..
Click to expand...
Click to collapse
I updated my answer above.
im not getting anything on the COM port mapping.also,my computer doesnt make any sound when i plug my phone,like it used to do before flashing twrp.should i go back to stock or is this a whole different problem?
dr.otcopusseh said:
im not getting anything on the COM port mapping.also,my computer doesnt make any sound when i plug my phone,like it used to do before flashing twrp.should i go back to stock or is this a whole different problem?
Click to expand...
Click to collapse
Make sure the Samsung USB Drivers are installed. Also uninstall/disable KIES (if it's installed).
i did that but it didnt work.i found out that the computer only recognizes my phone when it's in download mode,so i can only flash through odin.currently trying to flash cwm,but it beats me.currently trying to return to a stock rom,will post updates
kalpetros said:
Make sure the Samsung USB Drivers are installed. Also uninstall/disable KIES (if it's installed).
Click to expand...
Click to collapse
sorry for the late reply(weeks late).i didn't manage to make it work,so i just abandoned it until one day my brother picked the phone up,turned it on,and it suddenly started to work :|
thanks for the help man

Categories

Resources