Related
Recently tried to flash from JF6 to JH3 and failed. It's now stuck at the phone ! computer screen.
Here's what I've tried so far starting with all the pull sd,sim,batt out and put battery back in:
1. Hold both vol up and down, then plug in usb.
2. Hold both vol up and down, then plug in usb, and then hold power. Let it flash on and off until I get to the 2nd blank screen, then release power.
3. Hold vol up and power, then plug in usb. Let it flash on and off until 2nd blank screen, then release power.
Holding down and power doesn't make the phone!computer flash at all.
I'm really at a loss now. No idea how to get back into download mode... I wasn't able to use the key combos to do it before; just used adb.
Any tips? Help is much appreciated. Thanks in advance.
I've always done after turning off the phone:
1. Plug in USB
2. Hold volume up + down
3. Press and hold power until it turns off for second time then let go (although it's worked for me on the first time it goes off)
Worked every single time for me.
tysj said:
I've always done after turning off the phone:
1. Plug in USB
2. Hold volume up + down
3. Press and hold power until it turns off for second time then let go (although it's worked for me on the first time it goes off)
Worked every single time for me.
Click to expand...
Click to collapse
Doesn't seem to work for me... anything else you can think of?
Have you tied to Flash it with Odin back to stock? Always flash back to stock before flashing. Every thread starts with the same instructions, flash back to stock first. Not to kick you when you're down.
I'd flash back to stock with Odin.
Rhiannon224 said:
Have you tied to Flash it with Odin back to stock? Always flash back to stock before flashing. Every thread starts with the same instructions, flash back to stock first. Not to kick you when you're down.
I'd flash back to stock with Odin.
Click to expand...
Click to collapse
He wouldn't be able to flash without getting into download mode now would he?
op: Make sure that odin is open and ready on your computer. if that doesn't work then i hate to say it but...
Looks like I've got an expensive paperweight? Luckily for me I got it yesterday...
Stupidly enough though, I probably should have returned it in the first place. It wasn't working quite right... I've never seen a phone not respond to button combos or have problems connecting to a computer via USB and I've owned my share of Samsungs. Each boot into their own recovery mode just fine via buttons... guess I won the lottery?
If anyone has some ridiculously convoluted way to get into download mode, I'd be glad to try it.
Did a bit of snooping...
http://forum.xda-developers.com/showthread.php?t=765703
It seems there are a fair amount of phones with disabled button combos...
when i flashed to jh3, i found doing the adb reboot download the easiest way to get into download, even when i messed up my phone and it would boot to galaxy s screen and it would get stuck. Found plugging it in via usb and then running the adb command
Ah... I see. Well, considering I can't get it to recognize it or anything... it's pretty much fubar. I tried my sister's captivate and it boots into download mode just fine with both vol + plug in usb.. so I assume I just had a defective unit that became more defective.
Thanks for the help all, and let's just have this be a lesson to anybody who wants to know, if you follow the instructions on the odin thread and you can't get in, either you're doing something wrong or the phone is wrong...
And adb never hurt anybody.
Thanks again everybody.
pokedoke said:
Did a bit of snooping...
http://forum.xda-developers.com/showthread.php?t=765703
It seems there are a fair amount of phones with disabled button combos...
Click to expand...
Click to collapse
I just exchanged a Captivate for shutting down by itself, got one that can't three button reboot, accidentally bricked it and couldn't recover it. Exchanged it for yet another one that also can't three button reboot. Uggh!
Here's how it happened:
I was trying to swap Kernels by following instructions on cognition thread. I flashed the stock kernel and tried to apply the update.zip, and it gave me errors. I tried to reboot and the ATT screen came up and wouldnt boot. I was able to get it into download mode using adb, so I flashed the JI6 kernel. Now it won't go into download or recovery mode (just ATT screen).
Here's what I have tried:
- volume up/down + power buttons. released power button and recovery mode wouldn't come up.
- with power off, pressed volume up/down. Did not enter download mode.
- power + volume up. got a screen saying power reset or unknown upload mode?
- tried just hitting power and letting it sit for a long time to see if it would boot, but it just stays at ATT screen.
- adb reboot download (with device plugged into usb) - said device not found.
Is there something else I can try to get it into recovery or download mode? I figure I can flash the stock PDA if I can get that far. Is there something that a phone repair shop can do (special software, etc.) to help?
Any help would be appreciated.
Jason.
Have you read the READ ME BEFORE FLASHING sticky on the dev forum?
But.. try this:
Turn off your phone.
Take out the SIM, any external SDCard, and Battery
Plug in your USB Cable
Turn on Odin 1 Click - OTA JH7 Back to Stock
Hold down the +/- VOLUME Buttons on the phone.
Pop the battery back in - should go directly into DOWNLOAD mode using this method. If it goes to the gray "Battery Charging" picture.. unplug, take out the battery, and try it again.
And you had USB De-bugging turned on before you were doing all this (I'm guessing yes) Hopefully the above works.
BTW whenever it goes south like this .. better to just go back to stock and try again rather then potentially making it worse
thank you! That got me into download mode. I was able to flash back to stock. I was scared for a while.
Jason.
NP.. next time though read the Q&A sticky - should point you in the right direction a lil' quicker
And if you plan on to keep flashing new ROMs? Def go there first it should point you to different posts to keep you from having this issue in the future.
I had been using my Captivate for a while, and used Kies mini to upgrade to Froyo, and everything had been working fine until randomly the phone wouldn't boot.
It would take forever to go from the AT&T home screen, and would lag through the galaxy s intro, and then stop.
I tried to use Recovery mode, and it didn't work, so I tried to use Odin3 to flash back to stock.
Now it won't go past the Logo screen, and recovery mode doesn't work, but download mode still does. I have tried Odin one click, and Odin three click v 1.0, 1.3, and 1.7. I've used the .tar and the .pit from Breakin' Ranh's [Guide] How to Recover a Captivate to Stock 2.1 Eclair JH7
It keeps getting stuck in a boot loop after odin, no matter what I do.
Any suggestions?
Using SGH-i897
1007
first boot takes along time to build new files and delvik.. are you sure you waited long enough?
keep trying to get into recovery. try holding the buttons a little after the screen comes on.
factory wipe/ clear phone/
It keeps going to the AT&T logo screen for like 10 seconds, and then goes to the spinning wheel/battery charging screen, and then reboots.
Can't get into recovery mode through it, still.
a different .tar package.... dunno about that one..
or flash to 2.2 tar package
I have to use rom manager to get to recovery on my captivate
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I was able to use a dragon rom to get it to boot, but now my phone wont give me any access to my internal sd card, and won't mount my external, so I can't download rom manager because I "have no room" Where do I go from here?
I've already tried formatting both cards, and it seems like nothing happens whenever I click on format.
you dont need rom manager....ever
Then what does he need?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
stuck in the same position
I can get into download mode (only with a JIG tho) but when I go back to stock with Odin (or try to) it's just stuck in the AT & T logo screen, it doesn't go beyond that, how do I get into recovery mode, press both Volume buttons and Power button, when the AT&T screen comes release the Power button right?
Need some help please!
you might need to flash the 3 button fix but keep trying, if you get into recovery clear data and cache. but first boot always takes a long time as it has to build delvak cache and more... try flashing again, with the 3 button fix att rom.
3 button fix? to get into download mode you mean? I CAN get into download mode (with the jig) but not into recovery mode :-s
I have no idea how to flash it without being in the Stock rom, any help?
download is 2 buttons
recovery is 3 button.
some phones loose the 3 button combo to get into recovery.
in that case you need to flash the stock rom with 3 button fix.
it is for Att only so i dont know much more.
After Odin, I was in a boot loop yesterday. I plan on writing it up in a new thread to see if someone can help me understand what happened (cause I have Odined and modded two different cappys without issue) but here is how I was able to recover.
After Odin was complete and said successful, it reboots the phone.
Upon reboot I was in the ATT boot loop. After Odin, I lost both three button recovery and 2 button download (both of these worked before Odin). I don’t have a JIG so no way of getting to download mode.
I read to try the following sequence after reading it other posts.
1. Pull battery, sim, SD card and unplug the USB. Let it sit for a minute.
2. Plug in the USB cable.
3. Holding all three buttons, plug in the battery.
4. The battery charge (grey) should be seen on the phone. After the phone screen goes black twice let go of the power button.
This worked for me once, after several attempts.
Now that the phone booted back up, I did a master clear with Odin.
Upon reboot right back in to the ATT boot loop screen.
Was not having any luck with the steps above after several attempts.
Here is how I eventually recovered.
1. I opened Odin on the PC.
2. Pulled the battery and USB for a minute or two then replaced it and plugged in the USB cable.
3. After few cycles of black battery icon and spinning wheel, the batter icon turned green (like normal when you turn your phone off and plug it in). Sometimes this only took two cycles and sometimes many cycles (or a few minutes).
4. Once the battery icon was green, I hit the power button.
5. As soon as you see the ATT screen, pull the USB cable and the phone booted (if I left the USB plugged in, the phone went back to the black battery screen after the ATT screen).
6. I copied the correct Update.zip and Rom to my SD card.
From here I tried to boot into recovery via ADB.
The phone rebooted but back into the ATT boot loop.
Following the second set of steps above (2-3 times), I was finally able to get into Clockwork recovery.
From here I flashed Phoenix Unleashed.
After the flash rebooted and the phone seems to be running fine now (with the exception that I lost my 3 and 2 button combos, but that will be for a different thread).
From the Power Menu, I can get into download mode or Recovery no prob.
Not sure if this is something that will work for others but wanted to throw it out there just in case.
It never booted for me, so this is what I did
For anoyone that might find this thread, Odin 1 Click didn't work for me, so I flashed back into stock using Odin (not the 1 click version, another one), here are some links that proved to be very helpful (I ended up Flashing to Serependity 6.4):
http://forum.xda-developers.com/showthread.php?t=1031749
http://www.youtube.com/watch?v=Rdn5GoRjhn0
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
http://forum.xda-developers.com/showthread.php?t=884364
http://forum.xda-developers.com/showthread.php?t=919816
http://android-roms.info/roms/80-Serendipity
http://serendipityrom.weebly.com/download.html
FIXED:
Used this version of Odin to get me into recovery mode:
http://www.multiupload.com/PM9TNZWL84
Once I got that, I realized my internal SD card wasn't mounting properly, and used http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
this thread to finish flashing back to stock.
ok guys i'm definitely a noob at this but i think i messed up this morning downloading the gb drivers for my captivate. i was running serendipity 6.4 and i was trying to flash serendipity VII. i didn't flash back to stock 2.1 eclair with odin one click before i followed the instructions on downloading the new drivers for the gb. i went to the power menu on the 6.4 and hit download mode and plugged in the usb. it went halfway through the downloading process and stopped. my screen was blank without the downloading sign anymore and on odin it was at a halt. i waited for about 45 minutes for it to proceed and nothing so i unplugged it. when i did the factory recovery screen came up and i could use the volume up and down buttons to scroll through the menu choices but it wouldn't let me use the power button to make a selection at all like the power button wasn't working. i pulled the battery and put it back in after a while and now all i get is the galaxy s gt-i9000 samsung screen and nothing else. it wont let me back into recovery or download mode no matter what button combo i try. did i brick my phone and is there a way for me to fix this without having to buy another one? any help would be greatly appreciated.( guys, i realized i messed up shortly after it was done and messed up that i should've odin one clicked it back to factory before i did this,but by that time it was too late.)
When a problem comes along, you must jig it!
You might want to look into buying/making a jig to get you to a place where you can repair your phone.
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Please use more descriptive thread titles. Your title is useless to anyone doing a search.
440hsp said:
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Click to expand...
Click to collapse
Could you please quote/reply to these steps to getting into download mode?
From powered-off state, Hold V+/V-, insert USB cable
With battery out, Hold V+/V-, insert USB cable
From powered-off state, Hold V-, press & hold power button
If you haven't tried this combo yet, try using the home softkey in place of the power button with some of these combos - there have been reports of the power button getting remapped to the home softkey.
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
440hsp said:
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
Click to expand...
Click to collapse
Just out of curiosity, when you're at the android man/exclamation screen, if you have odin up already and plug in the phone, does it recognize that the phone's attached?
If so, you might be able to use the odin one-click to get back to stock eclair.
i will try that and get back to you. hopefully it will work.
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
440hsp said:
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
Click to expand...
Click to collapse
Hmm... I've reached the end of things I know to say to try. I'm assuming you've tried changing which port you're plugging your phone into on the computer?
Also, have you tried using adb to reboot to download? If not, get adb and use the "adb reboot download" command (I think...) to see if that gets you there. You may need to be in the recovery menu (if you can get back there), or the exclamation point / android guy might work, too.
Although, if you can get back to recovery, you might be able to mount your phone to the computer, drop a copy of CWM on there and reinstall that so you can have more options available to you.
Your best bet at this point might be to buy or build a jig. That should hopefully make the phone go into download mode so that you can get to where you need to be.
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
440hsp said:
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
Click to expand...
Click to collapse
Nope, root isn't needed to flash that ROM.
440hsp said:
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
Click to expand...
Click to collapse
Good to hear there's a glimmer of hope. If you do manage to get there, you might want to make an EFS backup before moving any further, just so you have one more tool in your arsenal of preventing phone problems.
After reading this whole thread I think your problem is that you now have gingerbread bootoaders and your button combos have changed and you don't know it.
Sent from my SAMSUNG-SGH-I897
i think you may be right about having the GB bootloaders. now first question is how to i manage to make an efs back up? secondly, if i have the GB bootloaders then what do i do to flash the complete serendiptiy VII onto the phone? the reason why i ask is because the phone just quit downloading the flash in the middle of the download and that's when all hell broke loose. lolol. but you guys are right. i might just have a glimmer of hope.
If you do have the GB bootloaders, you should (theoretically) be able to get to download mode with the volume - & power button combination. This may take a little fiddling to find a timing after you've started the phone to find out when you can get to it.
As far as flashing Serendipity, you could try, but my advice would be to try and get to stock Eclair first and then go forwards. You're in a place with a lot of variables, and stock Eclair would be as variable-free as you're likely to get.
As far as backing up the EFS, under the CWM recovery menu, there's an option to make a nandroid backup. That's step 1. Once you've made the backup, just copy it from the clockworkmod folder to a safe place.
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
440hsp said:
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
Click to expand...
Click to collapse
--------------------> delete
+1 on the jig...odin is very finicky and a jig will get you to download mode when you need it most...
buy or make one...worth every penny.
I'm running Cognition v4.1 (yeah it's old but it was the first time I ever flashed a ROM)
A couple weeks ago I started to experience odd issues with my phone so today I went into recovery mode and formatted the boot,system,data, and sd_card portions then I wiped all the data (I removed my SIM and external SD prior to this) when I hit reboot the phone has been sitting on the AT&T World Phone screen for over 40 minutes now.
Can anyone help me fix this?!?
yup boot into recovery and flash a rom.
dont FORMAT system, or boot, that erases your rom. dont manually format stuff.
if anything ONLY DO factory reset, or clear cache, or delete delvik cache
---------- Post added at 01:48 PM ---------- Previous post was at 01:46 PM ----------
oh you wiped your SD card, there go your downloaded roms....boot into recovery, mounts and storage, mount USB, plug in USB to pc and copy ROM.zip . UNMOUNT USB and then flash the ROM
This is what happens when a newb gets too much confidence.....
So since I was on a 2.2 ROM before I need to find another 2.2 to flash?
at least you knew and told us what you did. that got your phone back.
Okay so do you have any ROM suggestions? And if you have the time make it fool proof for me to get a ROM installed?
I can get into the Recovery menu and went to mount and usb but I couldn't see it when attached to my PC.....
1st question, DO YOU HAVE the gingerbread bootloaders yet?
if so you are able to go with any rom gingerbread or not.
if your phone didnt come with gingerbread and you have not had gingerbread on your phone (running) you DONT have them.
but you can get them and its a very palm sweating 10 seconds. LOL.
if you dont have them and dont want to go that far yet.. FIREFLY 3.0 (2.2 android) is THE BEST BY FAR in my oppionon and many others.
after selecting mounts ans storage, select mount USB from the bottom of the list, and it should pop up on your computer very quickly compared to when android OS is loaded.
then you should just be able to copy right over. if not the kernel you are using might have broken mounts. you will have to ODIN flash a different kernel...
start there...
I don't have the GB bootloaders I was going to go to stock today and get them and flash the new Fasty ROM but I'll give that a go and let you know how it turns out!
well you could flash one of the new gingerbread one-clicks WITH bootloaders.top of the dev page. " all one click packages " stickie thread,
Nevermind. I'm having trouble finding the correct drivers and where to get odin one click from..........
I got a different laptop from when I first flashed >_<
Okay I have drivers and Odin (didn't see it was at the bottom of the post) I followed the instructions and my pc doesn't recognize my phone (this is one of the problems I was having with my phone the last couple weeks was that even when turned off and plugged into pc the phone would just power on and not be able to connect.) I'm also on a windows 7 laptop I'm going to try it on my old XP desktop
And I installed the drivers and odin on my desktop same thing the phone was not detected after being put into recovery and plugging int the usb cable.
You use download mode not recovery for odin...
Open odin on the computer.
Pull the battery and remove your sim + sdcard.
Plug the usb into your phone and computer.
Hold down volume up and down, and put back in the battery.
You should be at a yellow screen saying "Downloading".
Then you can use odin/heimdall to flash stuff.
Open odin on the computer.
Pull the battery and remove your sim + sdcard.
Plug the usb into your phone and computer.
Hold down volume up and down, and put back in the battery.
You should be at a yellow screen saying "Downloading".
Then you can use odin/heimdall to flash stuff.
Click to expand...
Click to collapse
I can't get it into download, I do just as you say but it flashes the AT&T World Phone screen then goes black then flashes it again before going into ClockworkMod Recovery v2.5.1.3 - Voodoo lagfix
Dont touch the power button in that process
Okay I did it without holding the power button and my phone either tries to go into charging while being off (I presume I don't have both pressed) or when I feel like I have both pressed and insert the battery without touching the power button it just stays at the white AT&T World Phone screen =(
cant be in charging mode. if you see WHITE ATT screen YOU TOUCHED THE POWER.
odin must be open first.
unplug
take out battery.
put in battery with the screen black....
HOLD BOTH VOLUME buttons
put in USB
keep buttons held until you see yellow triangle.
TRusselo said:
cant be in charging mode. if you see WHITE ATT screen YOU TOUCHED THE POWER.
odin must be open first.
unplug
take out battery.
put in battery with the screen black....
HOLD BOTH VOLUME buttons
put in USB
keep buttons held until you see yellow triangle.
Click to expand...
Click to collapse
No go. It's doing what it has for the last couple weeks as soon as the USB touches it regardless of the vol +/- being held down it goes directly to white screen.
Should I just follow this thread? http://forum.xda-developers.com/showthread.php?t=1257434
I can't get any PC to notice my phone in any fashion and that's something that started happening a couple weeks ago
you said you flashed it from another pc before, have you tried that pc? and is it the ATT white screen or just a blank white screen?
that thread is talking about pure white screen
That PC is 2 hours away and when I gave it to my mom I formatted the drive and reloaded windows but here I have my Win7 laptop and a win XP desktop both are producing the same results as soon as the usb is plugged in it goes directly to the white ATT screen. I'm working on getting a video with my webcam to show exactly what is going on.