Hello Everybody!!!
Yesterday i`ve flashed my SGS from CM10 to the Stable 10.1 of CM.
Now i`ve got some Questions and hope someone can help me ...
First question is about the Hardware-Button "On/off".
In CM10 it was possible to Reboot to CMW-Recovery directly without pushing the combination of Vol+, Home-Button and On/Off-Button.
Is there any option to activate this function in the System-Menu???
Second question: In the settings I`m missing the "Performance" and the "Development Tools" - where you can regulate the CPU-Clokcing, I/O-Scheduler and so on. Are they removed from the settings or have i make a mistake while flashing/upgradinf to CM10.1
My telephone-number is not shown in the "Status-Menu"? Where can i enter my telephone number so that it will be show in the status-menu???
Last question Is there any file in the file-system where i can get the information about a) number of SMS sent and b) how many minutes i`ve telephoned in the current month? Is there any possibility??? In the Google Play Store there are some Apps - so the Apps must get the information, too!
CM10.1 on my device is stock!
Thank you very much and sorry for my bad English !!!
Hi
I hope I can help you.
1. There is the option to set up like that in most roms like aokp, it is generally found in the part of settings where you customize the look etc of the rom.
2.Cant help you with this one
3. Your number isnt always shown. I have never had my number shown no matter what device I am on but for you it might be that you have set your number to private
4.The apps on play store actually keep track of the time spent themselves or they add them up
ngeumnt than
Hi,
at first thank you for your reply ...:good:
1. Okay i will get through the hole menu and hope i find some option to enable "reboot in Recovery"
In the main menu of CM10.1 ==> "System" ==> "On-/Off-Button" are the following options:
- Reboot-Menu (it is active) ==> i think this is the option, but there is only the choice "Reboot" when pushing On-/Off-Button
- Screenshot (active, too!)
- Extended Desktop (disabled)
- Profile-Changing (diabled)
- Airplanemode (disabled)
- Silence (diabled)
2. All of my questions i want to post in "Galaxy S I9000 Android Development > [NIGHTLY][ROM][4.2.2] CyanogenMod 10.1 for Samsung Galaxy S" - but i`m a newbie with Posts < 10, so i couldn`t post it there :crying:
3. Okay that appease me, but what do you mean with "might be that you have set your number to private" ??? How can i do this ??? Is there an option, or do you mean "Caller-ID for outgoing calls" ??? I have tested with showing the number, but it doesn`t change something....
4. Okay there is no recording in the filesystem, instead the apps recording it by themselves ...do you have an recommendation for a app?
Hello again ...
the answer for my Question 1 and 2 is so easy, when you know it ... :cyclops:
To activate the additonal Option-Menus "Performance" and "Developer-Options" you only have to go to the "System-Options" ==> "Over the Device" ==> now you click 7-times on the build-number ...after 3-4 times a text like this is shown "you need only 3 times to be a developer...."
And now magic ...
==> You have the additonal Menus "Performance" where you can adjust CPU-Clocking, I/O-Scheduler and the "Developer-Options" where you can extend the "Reboot-Menu for Boot in Recovery"...
Some things can be so easy when you know .........
Regarding the call recorder thing sadly I cannt recommend as I haven't tried any, I just know from working on roms this info isn't collected by the rom, if you hold in the power button and click on reboot does it give you the option or does it just reboot
No Problem i will test some apps :good:
When you hold the On-/Off-Button and touch on the Option "Reboot" you get two Options "Reboot or Recovery". Then you take the option "Recovery" and push on the "OK"-Button and after a few seconds you get in the CWM-Recovery ...
Do you get the "Recovery-Option" ???
I'm not exactly sure if you asking me if I have the option or how to get it. What u saying is right you should get a recovery option there. My android broken, currently on blackberry so no I don't get the option.
My first question was ,how i can get the option "Reboot in CWM-Recovery" back.
But now (after the trick with pushing 7times on the Build number of cm10.1) i can activate the additional option for my On-/Off-Button.
Oh okay i thought you`re sentence "if you hold in the power button and click on reboot does it give you the option or does it just reboot" was a question...so i wrote the option you get qwhen you activate this function....
But now everything is clear and all works fine :good::good: ...
You`re android is broken? But you will get back to Android???
Yeah my galaxy s, my usb port is shorting ouit so it can't charge, just needa flash stock rom and send it in sometime
Oh that`s bad ...the original Stock Rom you can get on http://www.sammobile.com/firmwares/
But it i think you know the site
Yeah I know it, I had most of them but windows got corrupted and had to format. just needa download it, thanks anyway
Related
Hi people,
first - Excuse please my english
We (me and Jimm98y) in Czech republic are making ROMs to HTC Wizard and
some peoples say us: "Hey men, Why you don`t write about your ROM to
XDA-dev ?" Many posts on forum ce4you.cz is like:
Code:
Thank you people I think that is the best ROM for Wizard ever
So.... We´re here !
[size=+1]Please do NOT remake our ROM, because We were done a hard
work on it and we don´t want any steal of our job[/size]
So what´s in?
- OS 2.26.10.2 with aku 2.3 (we think that is still better then 3.2)
- GSM 2.25.11 (I think it is better than 2.47.11)
- HTC logo (surprise)
- Splash screen (Windows mobile loading...)
- ExtROM (many things unusuall things)
- IPL/SPL - not included
That ROM works only on CID-unlockded HTC Wizard
Base features:
IN ROM
- Program to browse contacts via Bluetooth
- Total commander
- OmapClock
- ScreenOff
- WM5torage 1.73
- Smartskey
- Default vlack theme
- Dialer vista skin by jimm98y with T9 and big buttons
- Skin for WMP ala WMP 11 by Xcilion (my rebuild)
- Voice speed dial settings
- HTC X-button
- Soft key applet
- Many registry tweaks (only universal)
- Cleartype by default
- deleted much unusable things
- Camera patch
- Removed green battery
- Removed MSN
IN EXTENDED ROM
Automatic
- Midlet manager (big program - if you do NOT need it - skip install and install extROM manually)
- CAB, that shows version of extROM
- Setup MMS folder
- SMS delivery fix (fix of non-shows names on SMS delivery)
Manually
(in that section there are programs, what you can manually install from the
shortcut in Start/programs/Install)
- Batti 2.1 (CZech program by "David Andrš" to show battery in upper taskbar - now fixed to english version)
- Wifi g enable (cab with one register to quick enable/disable by uninstall
wi-fi b/g)
- Mchat2.1b (icq client)
- .NET cf2
- TCPMP with all plugins included AAC
- Windows live messenger
- And configuration cabs to Czech Republic GPRS, but you don´t mind them
All packed to
- 45 MB free ROM (before customization)
- 42.3 MB free ROM (after customization)
- 32.2 MB RAM (always)
IN rom there is default clock to 252 MHz (by omapclock + smartskey) and you
can quickly in: Programs/overclock set any other "base" clock.
I think there are plenty of things to wrote, but I have not time to next New Years
EVE and here you have a video, what will put your minds about that ROM:
You can download some foto templates, because in ROM there is only one
czech home page
you can get our banner
[size=+1]download Superrom v 1.1 by ppctuning.org[/size]
SupeRom
Thanks guys As i write this I'm downloading the Rom. I'll let you know how it works for me.
Thank you guys, I will try it this weekend and give a feedback.
thanks, it's great to see new rom cookers here as Ive always feel that every cook brings a little something to the table!
Installed with no problems. Well slight problems with configuring the battery meter as it is in Czeck! - so some trial and error here but it works very well.
Everything works fine with T-mobile in the U.K.
Early days but could be the best ROM yet.
I have tried all the others and up to now have been using
Risidoro. This is similar but may just edge Risidoro into second place.
Very well done.
An english version of the battery meter Batti 2.1 can be found at:-
http://andrsd.blogspot.com/2006/08/batti-21.html
Makes it a lot easier for us english to configure!
Does this ROM have Crossbow Icons?
aminsamizadeh said:
Does this ROM have Crossbow Icons?
Click to expand...
Click to collapse
No it does not.
After having some problems with Molski's, battery drain etc. I installed yours, up until now running smoothly.
Maybe worth considering the crossbow icons, because people are waiting for this for 3 weeks already. It seems very important.....
..........
Thanks guys
CR Rulez..
Okay... So I've done the install.. First off, it looks an works great, almost..
It can't connect via USB anymore..
It doesn't even start charging the battery...
Any ideas of what I've done wrong? The whole install went perfectly well and I had my wizard connected untill it said that the install was completely finished...
edit: I've attached it to my regular charger and doesn't work anymore to.. It did worked fine yesterday... Any thoughts?
gvink said:
Okay... So I've done the install.. First off, it looks an works great, almost..
It can't connect via USB anymore..
It doesn't even start charging the battery...
Any ideas of what I've done wrong? The whole install went perfectly well and I had my wizard connected untill it said that the install was completely finished...
Click to expand...
Click to collapse
Unplug the device from USB, reboot it and then plug in the USB cable after it boots.
vasquja said:
Unplug the device from USB, reboot it and then plug in the USB cable after it boots.
Click to expand...
Click to collapse
After the boot is completed or when it gives the startup screen?
edit: It seems that my wizard has given up..
When I turn it on it does all the 'checks', than it gives the Splash screen (Windows mobile loading...), and after that the screen sort of flashes.. It actually turns into stripes, than
it turns into grey -> black, and it boots up again.. It keeps doing this routine.. It looks to me it's sort of broke? When I plug it in via USB it doesn't make any difference...
PLZ help me here...
making cabinet files for ppc?
Wanted to know if anyone could tell me how to make cab. files? What software to use? Please HELP!!! Wanted to make cab to install.
gvink said:
Okay... So I've done the install.. First off, it looks an works great, almost..
It can't connect via USB anymore..
It doesn't even start charging the battery...
Any ideas of what I've done wrong? The whole install went perfectly well and I had my wizard connected untill it said that the install was completely finished...
edit: I've attached it to my regular charger and doesn't work anymore to.. It did worked fine yesterday... Any thoughts?
Click to expand...
Click to collapse
Try to go to:
Code:
Start\Settings\connections\USB to PC
It can help if you AS on PC is quite broken
gvink said:
After the boot is completed or when it gives the startup screen?
edit: It seems that my wizard has given up..
When I turn it on it does all the 'checks', than it gives the Splash screen (Windows mobile loading...), and after that the screen sort of flashes.. It actually turns into stripes, than
it turns into grey -> black, and it boots up again.. It keeps doing this routine.. It looks to me it's sort of broke? When I plug it in via USB it doesn't make any difference...
PLZ help me here...
Click to expand...
Click to collapse
Try this one i think u flash ur previous ROM which is still locked...it happens before with me.
1.In your PC (task manager) "end the task for wescomm.exe" you can find this in the processes window (this is related with activesync installed on your PC).
2.Get your phone in bootloader mode. Like this : hold the "voice dial" and shortly press the reset button by stylus, release the reset button and wait for the USB color screen
3.Now connect your USB cable to your phone. And start MTTY_updateROM.exe as attached . After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
4. Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
5. To revived your device you have to downgrade it to 1.05 Rom ( ftp://xda:[email protected]_11210_WWE.exe )
6.Be sure that you have to unlock first your device before you will flash again with another ROM like V2.XX or more.
arliejoseph said:
Try this one i think u flash ur previous ROM which is still locked...it happens before with me.
1.In your PC (task manager) "end the task for wescomm.exe" you can find this in the processes window (this is related with activesync installed on your PC).
2.Get your phone in bootloader mode. Like this : hold the "voice dial" and shortly press the reset button by stylus, release the reset button and wait for the USB color screen
3.Now connect your USB cable to your phone. And start MTTY_updateROM.exe as attached . After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
4. Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
5. To revived your device you have to downgrade it to 1.05 Rom ( ftp://xda:[email protected]_11210_WWE.exe )
6.Be sure that you have to unlock first your device before you will flash again with another ROM like V2.XX or more.
Click to expand...
Click to collapse
Sorry i coudnt attached the file MTTY_updateROM.exe anyway here is the link...(http://wiki.xda-developers.com/uploads/romupdate.rar
Hey mans - I think that is quite offtopic.
BTW - I have fixed the version of batti 2.1 to English version.
Johnnnnnnnnnny said:
Hey mans - I think that is quite offtopic.
BTW - I have fixed the version of batti 2.1 to English version.
Click to expand...
Click to collapse
sorry...for that
arliejoseph said:
Try this one i think u flash ur previous ROM which is still locked...it happens before with me.
1.In your PC (task manager) "end the task for wescomm.exe" you can find this in the processes window (this is related with activesync installed on your PC).
2.Get your phone in bootloader mode. Like this : hold the "voice dial" and shortly press the reset button by stylus, release the reset button and wait for the USB color screen
3.Now connect your USB cable to your phone. And start MTTY_updateROM.exe as attached . After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
4. Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
5. To revived your device you have to downgrade it to 1.05 Rom ( ftp://xda:[email protected]_11210_WWE.exe )
6.Be sure that you have to unlock first your device before you will flash again with another ROM like V2.XX or more.
Click to expand...
Click to collapse
Great! It looks like it's working perfect..! Only the part with the updater isn't completely clear to me... I can get the USB color screen and hit the "r2sd all" in the blank sheet. It immediately gave the Cmd> and a white bar with USB in it below the screen on my wizard.. ?
(immediately after I entered my way through the "r2sd all" command) It doesn't give anything extra...
Any more thoughts
SuperROM 1.1 WWE
Hi all,
I flashed that molskis ROM and than Superrom 1.1 WWE by ppctuning.org and I must say:
The SuperROM is the best ROM for wizard, much better than molski, ridsoro, faria etc! There are also changes right in system, but much more.
This ROM is very fast and stable. The system is faster, without overclock (I disabled it), than in other ROMs overclocked to 240MHz! After HR it has 45 MB free ROM and 32 MB free RAM. There are preinstalled some usefull programs (only freeware) and you can optionally install much other programs from extended-rom.
First of all I would like to say hi to everybody, this is my first post on this awesome forum I found just today. I would also like to say that I bought my first smartphone a few days ago(HTC Wildfire of course) and when browsing on the internet trying to find out stuff I could do with the new found device I found a lot of people reffering to something called 'rooting' and 'flashing' and 'ROMs' and that doing this enables your phone to have a lot more new functions and stuff like that.
Therefore I have some questions to ask you nice people, so here they are:
- What is 'rooting', 'flashing' and what are 'ROMs' in the first place?
- I found a lot of abbrevations when people described 'rooting' their phones which I did not understand so I'm kindly asking if anyone could please explain the process clearly? (is this the correct process? -> forum.xda-developers.com/showpost.php?p=7895908&postcount=127 , if it is what is the OTA update?)
- If someone could please explain the process of 'flashing' to me?
- Are there any recommendable 'ROMs' I could try?
I truly thank anyone who would be able to explain this to me and take their precious time to do so. I'm sorry if my questions seem silly but I'm extremely new to the smartphone android thing and therefore I don't understand everything.
Thank you again for your replies, ciroman
- What is 'rooting', 'flashing' and what are 'ROMs' in the first place?
Rooting = gives you/apps on the phone acess to root acount in android wich gives you acess to do things wich you can not do normally. read more about root and superuser(su) here: http://en.wikipedia.org/wiki/Superuser
ROM = is sort of the operating system wich most often comes in zip files and is possible to flash to the phone with a custom recovery. this often include apps and modifications wich is made of the person who makes the ROM. also includes superuser acess (root) not allways but often.
custom recovery = a recovery mode wich allows you to do backup of your current settings and evrything else you have on the phone. also makes it possible to flash ROMs wich you have saved on the SD-card
Flashing = this is when the recovery takes your zip file and exctract it to your phone. when this is done you have a new "operating system" on the phone
- I found a lot of abbrevations when people described 'rooting' their phones which I did not understand so I'm kindly asking if anyone could please explain the process clearly? (is this the correct process? -> forum.xda-developers.com/showpost.php?p=7895908&postcount=127 , if it is what is the OTA update?)
Yes this looks like the process of rooting/installing a recovery.
OTA = Over The Air
- If someone could please explain the process of 'flashing' to me?
wont explain this.. it should be explained somewhere else..
- Are there any recommendable 'ROMs' I could try?
There are only a few ROMs out at the moment..
The only one I can recomend for you rigth now is wildpuzzle ROM by danne_jo there is more ROMs out but I dont know how stable theese are.
Click to expand...
Click to collapse
I dont garantue that this info is 100% correct and anyone who feels like please correct me if im wrong.
I also take no responsibility for any damage made to your phone by following any of the above information.
Thank you so much for your quick explanation. I must say though that searching for how to flash and root this phone was quite painful for a newcomer like me-took me hours to find the first part and then some to find the second.
I hope following these two guides will get me there
shinelt said:
Prep
Before beginning the process, I would recommend doing the following to your phone:
(1) If you have the original unrevoked root installed, uninstall it by using "Menu", "Settings", "Applications", "Manage Applications" and scrolling to "Unrevoked" at the bottom. Tap it, click "Force Stop" at the bottom and then "Uninstall", "OK" to uninstall it. Then power off/on your phone just to be sure.
(2) If you haven't already installed the OTA 1.47 update, do it now: "Menu", "Settings", "System Updates", and "HTC software update" at the bottom, then click "Check Now" to get the 1.47 update. If you do this update, it takes up to 10 minutes so be patient and let the phone reboot (a few times) until it is done. Then once the update is done, power off/on one last time to get a clean start.
(3) Set your phone to "Charge Only": "Menu", "Settings", "Connect to PC", tap "Default connection type" and select "Charge Only".
(4) Enable USB debugging: "Menu", "Settings", "Applications", "Development", and put a check in "USB debugging".
The root process
(1) Go to Control Panel on your system and uninstall any "HTC" software such as "HTC Sync".
(2) Download the unrevoked3 install package: Go to
unrevoked3 recovery reflash tool, v3.0 and click "Download for Windows". Save the "Reflash-bundle.exe" file somewhere that you can find it on your system.
(3) Using Explorer, run the "Reflash-bundle.exe" file you just downloaded. It'll ask where to install it. Don't just accept the default: change the install location to a folder you can remember: it's just going to unzip some files there: it isn't really a software installer.
(4) Once the files have unzipped, go to the folder you chose in the above step. You should find an "hboot driver.htm" file in that folder: double click on that to open the html instructions on how to install the drivers. Follow the instructions in the html file starting with downloading the actual driver files at the very top. When you download those driver files and unzip those, those are the files (the folder) you'll point to in subsequent steps in those instructions. When done with the html instructions, you should have drivers installed and shouldn't have to come back to this step.
(5) At this point, if you needed to install the drivers, you are probably still sitting at a boot menu on your phone. UNPLUG the phone from USB and select "Fastboot" and then "Reboot" to reboot the phone to restart it. Before the next step, your phone should be on and booted up in its normal operating state (not some boot menu).
(6) If you are running anti-virus software, turn it OFF or disable it now.
(7) Now go to the folder where you unzipped the reflash bundle (step 3 above). In XP or older systems, just double click the "Reflash.exe" file. On Vista and Win7 systems, I'd recommend right clicking on "Reflash.exe" and selecting "Run as Administrator". While this may not be necessary, I know that some USB drivers get really mad if you try to access the USB port without admin privileges (sorry, I'm a coder so I run into that stuff and warn you so you don't have to) so I did it as a precaution.
(8) You should get a window with "Unrevoked 3" on it (on the computer of course). Just follow the instructions in smaller font below "Unrevoked 3" to finish rooting. Note that when it says "Waiting for device", it wants you to plug your phone into the computer via the USB cable. Note that it wants the wildfire to be fully booted normally (not in the Hboot or recovery menus). The prompts at this point are very specific so no need to repeat them. If all works as it is supposed to, the only thing you really have to do is scroll to an item on the phone and select it when instructed. The rest is automated and should result in a "Done" message. The whole thing at this point took maybe one minute so it isn't something you have to wait for or stare at for a long time so if something gets "stuck" for a while... there's likely a problem.
(9) Don't forget to turn your anti-virus software back ON.
Now, when I followed these steps on my Win7 x64 system, reflash.exe detected the phone and started working (we're in step 8 here) but about 4 messages into the process I got the "communications lost... try again" message that unrevoked refers to on today's Twitter. Some say that (contrary to step 1) installing HTC sync actually solves the problem. I didn't try that. After about 6 tries on my Win7 system and even pulling some "tricks" to try to pause reflash.exe at certain points, I gave up and simply booted my old XP laptop and repeated the above steps and it worked perfectly the first time. At the point of the failure, you hear the two tone usb-device-disconnected sound followed by a use-device-connected sound about 20 seconds later. Somewhere in between is where the "communications lost" message appears so it looks like some sort of USB ack/nack issue. Hopefully it'll be resolved soon. My best advice if you get that error: try a new machine. The XP machine that worked perfectly for me had never seen any HTC software. Maybe that helped. And maybe after I uninstalled the HTC software on my Win7 x64 system (the one that didn't work) I should have rebooted before continuing: I didn't because it didn't prompt for a restart and I couldn't find anything "HTC" running in task manager.
do wipe data/factory reset
put all files to sd from puzzle rom. ( go to partitions menu > mount usb storage)
(put those 01 , 10 , 52 ,300 , 400)
go to nandroid> backup
go to install zip from sdcard
and install files from 01 to 400.
go back and press reboot system now.
Click to expand...
Click to collapse
fireplayer said:
I'm just as n00b as you on this. But I'll help you out...
1. After using unrevoked once - reboot your Wildfire.
2. Go to first page on this thread that you read right now.
3. Download the things you want to flash - all links are in the 1st post. - put them on your SD-Card - start with flashing 0001_WildPuzzleROM_v2.zip first - to do this - download that file and save it - anywhere on your SD-card (somewhere you'll remember where you put it). Download and save all you want from 1st post on this thread - to your SD-card...do NOT open the zip files - just copy them to the SD-card.
4. Turn off your Wildfire
5. Turn on your Wildfire while holding Volume Down button - you have to have your SD-card with all the files you want - inside your phone now.
6. This get's you to the boot screen. Wait for HBOOT to say no image...blabla..
7. Push Volume Down to get to option "Recovery" - press Power button.
8. Phone will Reboot to a white HTC screen - and from there go to ClockworkMod Recovery screen - if you did everything correct.
9. Press Volume Down several times - until you get to option "nandroid"
10. Press the round button at the bottom of your Wildfire - the one you use to take pictures when using Camera functions, let's call it the Camera button.
11. You see "Backup". Press Camera button, and wait until it's done backing up your system. Do NOT turn off your phone! Wait until it's done. It will say Backup complete!
12. Next if you want. But only if you want - you don't have to - you can Wipe / Factory Reset your phone, saves a lot of ROM space and Memory. Phone WILL be slightly faster if you choose to do this - but all your programs and settings will be gone - Your choice.
IF you do NOT want to Factory Reset your phone, skip steps 12 & 13.
IF you want to do this then push Volume Down until you get to option "wipe data/factory re" (probably reset, but only show until re on my phone) and then press the Camera button.
13. As to make sure you really want to do this, you need to confirm... push Volume Down until you reach option "Yes -- delete all u" - then press Camera button and wait.
14. Now you can start flashing. Push Volume Down until you reach option "install zip from sdcard" Press Camera button.
15. Push Volume Down until you reach option "choose zip from sdcard". Press Camera button.
16. Find where you put the files you downloaded from post 1 on this thread. Choose 0001_WildPuzzleROM_v2.zip. Press Camera Button.
17. Push Volume Down until you reach option "Yes - Install 0001_W". Press Camera button. Wait for it to be done.
18. Repeat steps 14-17 with the other files you want to flash. IF you want to Flash files that are 0900 or higher. Reboot and change Wallpapers before you do.
To reboot Press Power button to go back and Press Camera button on option "reboot system now". Then repeat steps 5-7. If you need help changing wallpapers too let me know and I'll try to explain that too.
When done flashing the files you want. Reboot. And you're done.
First reboot after flashing Wild Puzzle Rom takes a very long time. Be patient.
I hope this guide made sense. If there's anything unclear let me know and I'll be happy to clarify. Thanks and Good Luck!
*EDIT* Just saw that someone else made a guide too, well at least there are people wanting to help us n00bs. Thanks. and I think both guides should work. Hopefully you'll make some sense of them *ENDS EDIT*
Click to expand...
Click to collapse
Thanks again!
After various requests, official and unofficial I have taken the time to consolidate all the needed information to make the flashing process as simple and as noob friendly as possible! Please follow the guide below!
This is the A to Z guide on how to Flash custom SBF, Root, Install Recovery and enable such things as GreyBlur and 1080p recording on the Atrix!
After the release of 2.1.1 from France’s MotoAtrix I was anxious to see what could be done on this SBF.
As we know this is the latest SBF released on the 29th of April, 2011. It is, based on the version numbers, the next step forward from 0.37 on the Stock BELL phone.
After a lot of benchmarking (now 2800-2900 hundered on Smartbench 2011) and testing as well as feedback from the Intl/Bell community, it seems this is the most responsive and battery efficient SBF. I’m amazed at how speedy the phone is, including boot up (which is at least a third faster than 1.4.2)… HSUPA is unlocked as well on this SBF, so this is good news for us as there is no need to flash custom, sketchy mods to enable this on our phones. As for the fingerprint reader, the driver appears to have been updated so it is incredibly responsive so this is an improvement although 1.4.2 was great in this regard.
*To find out more about HSUPA, read the FAQ at the end of the post.
At the moment though, as it stands I can only recommend you install GreyBlur as it is currently the one with the least amount of bugs, and the BEST battery performance.
DISCLAIMER: All of the procedures below require some basic computer knowledge and could potentially brick your phone. Please proceed with caution and make sure you read everything CAREFULLY.
Everything has been tested but requires that this guide is followed TO THE LETTER. AT&T ATRIX NOT SUPPORTED
>> Be aware that sections of this guide apply ONLY to 2.1.1 and now 2.2.3 and are NOT for AT&T Atrix at all! <<
Please check out this AWESOME VIDEO GUIDE HERE! (Thanks to J-Roc!)
Part 1
Part 2
Part 3
Part 4
Make sure your device is in the list below:
Supported devices:
South Korean Atrix (Information pending)
Brazillian Atrix (Base OLYLA U4 0.50.0)
Argentinian Atrix (OLYLA U4 0.50.0 Variant)
Canadian Atrix (OLYLA 0.37.4)
Mexican Atrix (Information pending)
Australian Atrix (OLYEM 1.4.2)
UK Atrix (Orange. Information pending) <----- DO NOT INSTALL GINGERBLUR/GREYBLUR... just 2.1.1
French Orange Atrix (OLYEM_U4_1.3.3)
Required files: (Download all of these as needed)
RSD Lite 5.0 -> Here
Win 7 Drivers x32 (if applicable) -> Here
Win 7 Drivers x64 (if applicable) -> Here
Download 2.1.1 SBF if you are going to Flash this.
OLYEM 2.1.1 SBF -> Here
Mirror -> Here
The Preparation script includes the needed APKs to obtain root and install Clockwork Recovery.
Seven’s Prep Script - > Here
GreyBlur 2.1 -> Here <-- 100% working, great performance.
GingerBlur 4.0 -> Here <-- Nasty startup bug, work around soon.
Seven’s BlurFix -> Here
Seven's DeOdex Tool 2.0 -> Here
GUIDE INDEX:
STEP 1: How to Flash the latest SBFs (Guide for EVERYONE)
STEP 2: ROOT and RECOVERY (and now: DEODEXING!)
STEP 3: Flashing GreyBlur/GingerBlur
STEP 4: Apply BlurFix Patches: Fix issues with BLUR Roms and enable 1080p recording + tweaks!
STEP 5: APN Information and FAQ!
ENJOY!!
GingerBlur/GreyBlur was created by XDA's very own Kenpenneth! Support his work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 1: How to Flash the latest SBF (Guide for EVERYONE)
This is a quick guide on how to flash the latest SBF.
This applies to all SBFs as well so use as needed but operate with caution as doing something wrong here could seriously damage your phone. Make sure the SBF file you are attempting to flash is compatible with your phone. (RESEARCH, do no ask in these threads as Google will easily yield the correct results)
-Make sure your phone is unplugged
-Install the required Drivers for your phone (x32 bit or x64 as needed)
-Extract the SBF zip file to your desktop. It will create a folder with a file with an .SBF extension and should be about 1.4gb in size.
-Install RSD Lite using the installer linked above. This will create an Icon on your Desktop
-Execute RSDLite. This process will take a long while the first time, about 3-4 minutes max.
-Once the program is open, plug in your phone in to the computer. Wait for Windows to notify you that the drivers have been configured correctly (takes 2-3 minutes max)
-Unplug your phone from your PC and then reboot your phone.
-As the the phone powers up (Right as the Red M appears) HOLD the VOLUME UP key…
-The phone will display this message: “Starting RSD protocol support”
-Wait about 20 seconds (on the safe side)
-Having the RSD Lite window open, plug in your phone.
-RSD Lite will display your phone information in the bottom and should list it under slot 1.
Status: Connected…
-Click the button the left of START, a button labeled as: “…”.
-Navigate to the SBF file you extracted above.
-Once you have selected this SBF file, the information readout will display in the “File Properties” Window.
Now you are ready to flash:
-Select START
This process will take about 5-10 minutes depending on your computer. You will know this process is finished once your phone has fully booted and about 2 minutes have passed. WAIT the 2 minutes as sometimes people unplug the phone before RSDLite clears and this has caused issues previously. At this point, after having flashed:
REBOOT your phone. DO NOT SETUP until after the first reboot.
-Unplug your phone from your computer, close RSDLite
-After Reboot, complete the MotoBlur setup. (you can skip it but it’s better not to as it is known to cause some issues on some SBFs and phones).
Wait a few minutes and now the phone is ready for the next step.
You have now successfully flashed!
STEP 2: ROOT and RECOVERY
REQUIREMENTS:
External SD card. Make sure your phone has it inside. <– THERE IS NO WAY TO ROOT WITHOUT THIS.
Noob HELP – Skip this section if you are experienced with ADB and debugging mode.
In order to prepare for this download the “Preparation Script” from the Required Files section above.
-Making sure your phone is unplugged go to:
“Settings -> Applications -> Development”
-Enable USB Debugging – Tick the box.
-Plug in the USB cable to the phone
-Wait for the phone to acknowledge the connection.
-Pull down the Notification bar up top and select “USB Connection”
-In this prompt select “None” and press OK
-The phone will reconnect to the computer with USB.
-Unplug the phone and reboot
-After the phone boots up, plug the phone to the computer.
Now let’s move on to ROOT and RECOVERY
-Make sure USB Debugging is enabled. Plug in your phone (if not already plugged)
-Extract SevenPrepare.zip to your C:\ drive, Example: C:\SevenPrep
-Double click SevenPrep.bat
-Follow the prompt. This will basically install GingerBreak and System Recovery
-After the prompt closes, execute GingerBreak from your appdrawer and hit "Root".
-The phone will reboot. After the phone reboots, execute "System Recovery" from your appdrawer and hit "Install Recovery"
-You will get a SuperUser prompt, asking you to either Allow or Deny this application access to your phone. Hit “Allow”
-After a few seconds it will say “Install complete”
Your phone is now Rooted and Recovery has been installed - Stop here if you are interested in keeping your phone on STOCK and are not interested in flashing the Ginger/Grey ROMS. If you wish to de-odex stock 2.1.1 read below, if you do not know what this is, skip it.
DE-ODEXING (OPTIONAL)
If you are interested in theming stock 2.1.1 or installing language packs such as arabic, you will need a De-Odexed ROM. In order to do so I've created a little tool that will get you going.
REQUIREMENTS:
Make sure you have downloaded Seven's Deodex Tool 2.0.
>>Please be aware this tool is ONLY for 2.1.1. Using it otherwise WILL brick your phone.<<
-Make sure USB Debugging is enabled. Plug in your phone (if not already plugged)
-Extract SevenDeodex2.zip to your C:\ drive, Example: C:\SevenDeodex2
-Double click SevensDeodex.v2.0
-Follow the prompt. This will basically install the deodexed system files and give you instructions on what to do next.
-DO NOT CLOSE THE CMD PROMPT.
-After all the files have been copied, simply follow the instructions listed in the BAT file.
If you read the prompt carefully you will see it instructs you do the following the following:
-Open up ADB Shell and type the following commands in this order, one by one:
su
cd /data/local/tmp
chmod 755 install_script.sh
./install_script.sh
Simple! It will take a minute to finish. Once it is done your phone will reboot and you will be de-odexed!
Step 3: Preparing and Flashing GreyBlur/GingerBlur
>> IF YOU HAVE A LAPDOCK READ HERE!! << - >> If not skip this portion and move to: How to Flash GreyBlur!
It just so happens that if you simply flash over 2.1.1 the default keyboard layout for the Lapdock will be stored as AZERTY and your special characters will not function properly. This is mainly because by default the hardware keyboard layout is set to France.
BEFORE flashing GingerBlur/GreyBlur you MUST follow these steps to ensure that the selected Keyboard layout matches your current Lapdock SKU.
You must do the following:
-Dock your Phone with Stock 2.1.1 on your Lapdock.
-Wait for Webtop Environment to properly initialize.
-Once the Webtop has booted, go to the upper right hand corner and click the COG. This will open up a menu.
-Select Keyboard
-Click on the "Test settings box" and type freely using your Lapdock keyboard. As you will notice it will not type what you keyboard layout is unless you have the French lapdock.
-Click the Keyboard Language... button
-This will boot you into Settings->Language & Keyboard Settings
-Scroll to the bottom and you will see two boxes that will allow you select which Keyboard layout you wish to choose.
-Set BOTH of them to English US (if this is your keyboard layout, this applies to Canada, US). If you have a different layout, choose it from here!
-You will notice it will NOT let you set the bottom one untill you unplug your phone and replug it. Follow the instructions!
-Once you have successfully changed these settings go back to the "Test settings box" and type freely using your Lapdock keyboard.
Now it will properly reflect your current layout and these settings will be saved! Move on to the next section below.
How to Flash GreyBlur!
REQUIREMENTS: AC Power Adapter – keep this plugged in until you finally boot GreyBLur.
-Having downloaded either GreyBlur or GingerBlur, copy one of these files the root of your INTERNAL SD card.
-Make sure Recovery has been installed (if you followed the guide above you are ready to go!)
-Once Recovery has been installed, open the program and plug your phone to the AC power.
-Select “Recovery Mode” -> You will receive another SuperUser Prompt. Select ALLOW.
-The phone will now reboot and enter Clockwork Recovery.
NOTE: If at this point you could not enter recovery, it is because you are NOT plugged into AC power. It will NOT work on USB power as this is a security measure so that we can access Clockwork Recovery when our phone is not booting into Android OS.
-Once in Recovery, use the VOLUME UP and DOWN keys to navigate.
-Navigate down to the option “Install zip from SDCARD”, Press the power button to enter that submenu.
-Once in this new menu select: “Choose zip from internal SD Card”
-Select the zip file you copied in the steps above. Example: GreyBlur-2-1.zip
-Once you have selected this zip file, scroll down and select YES.
-The installer will run and once it is finished it will say “Install from sdcard complete”
-Select “+++++Go Back+++++”
-Once at this menu select: “Wipe DATA/Factory Reset”
-Select “Yes”
-It will take a few seconds until this is complete and you will see a message that says “Data Wipe Complete”
You are now ready to start your phone!
-Unplug your phone from the AC power
-Select “Reboot System Now”
You will now see how the GingerBlur/GreyBlur logo as your phone boots up shortly after the Red M “Dual Core” Logo.
-After the boot finished, ALWAYS ALWAYS ALWAYS select “Set-Up”
NOTE: >>SKIPPING THIS MAY CAUSE ISSUES SO DO NOT SKIP IT. SWYPE WILL CRASH. <- This is normal until we apply a fix! <<
-Complete the MotoBlur setup. (In this case, NEVER SKIP THIS….!!!!!!!!)
-Register or log into motoblur blah blah blah you’re done!
-As you are finishing it will prompt you to update your phone. DO NOT UPDATE!!! Just select later….
-Add any needed APNs to enable DATA on your phone. If you don’t know how to do this read the FAQ at the end of this post.
-You will also see a POWER icon on your upper left hand corner. Open the notification bar, click the notification and select the correct profile for you. I use PERFORMANCE MODE.
You now have successfully Flashed GreyBLUR on your phone but this is NOT all that is needed.
Read below.
Step 4: Apply BlurFix Patches to fix compatibility issues with GreyBlur/GingerBlur and enable performance tweaks!
This patch will fix update notification NAGS, remove Swype and also will enable 1080p Video recording as well as enable performance tweaks!
READ FAQ for more information.
Noob HELP – Skip this section if you are experienced with ADB and debugging mode.
-Pull down the Notification bar up top and select “USB Connection”
-In this prompt select “None” and press OK
-The phone will reconnect to the computer with USB.
-Debugging mode will now be enabled.
If it does not:
-Unplug the phone and reboot
-After the phone boots up, plug the phone to the computer.
Patching:
-Having downloaded Seven’s Blurfix Patch from the Required Downloads above, extract this file to your C:\ drive. Example: C:\SevenBlurpatch
-Open SevenBlurpatch folder
-Run “Seven's Blurfix”
-Follow the steps prompted in the CMD window.
-After the script files have been copied over it will ask you to press any key to continue.
-It will leave you with an open ADB Shell, displaying the “$” symbol.
Type in the following commands in this order:
su
At this point, MAKE SURE YOUR PHONE’s SCREEN IS ON. PAY ATTENTION as it will prompt you to ALLOW or DENY. Select ALLOW on your phone or this will FAIL. If it fails run Seven’s Blurfix again.
The $ sign will change to a # sign.
This means you have Root access through the terminal window. Now we will manually execute the script.
Type the following command at the # prompt:
./data/local/tmp/blurfix_script.sh
After this the phone will reboot and then you are READY TO GO! Read Step 5 for APN information and FAQ!
No more ATT update nags, no more issues and 1080p recording enabled! Performance tweaks enabled, tethering re-enabled. Read the FAQ Section on how to record in 1080p!
STEP 5 - APN Information and FAQ
Here is the correct APN information for all pertinent carriers. I was unable to find the Korean APN information so if someone will PM me this, I will gladly add it!
It can be found -> Here
This is how you add APN settings:
-Press the Menu key
-Go to Settings
-Go to Wireless controls
-Go to Mobile networks
-Go to Access Point Names
-Press the Menu key
-Select New APN
-Add pertinent information
Depending on what carrier you use, these are the settings:
You might need to add 2 APNs for your specific carrier.
Whatever is does not have settings, leave blank.
After you have added your APN information make sure you ENABLE the little RADIO icon.. its the circular icon, that is usually empty after adding APN information.
Frequently Asked Questions!
Q) What's so special about 2.1.1 vs Stock or 1.4.2
A) A lot of things! Some of the most noticeable improvements are the boot time when using stock 2.1.1. It is FAST and the display is much more responsive than stock Bell Motoblur. Also MotoBlur is much more responsive in loading and switching between screens, even the stock keyboard is an improvement in terms of feedback and usability. Stock 2.1.1 no longer lags when typing. The fingerprint reader has improved significantly as well in comparison to previous SBF. Quadrant scores also went up for me in comparison to 1.4.2 GreyBlur. There is a lot of feedback regarding this but all of it has been GOOD.
Q) Should I stay on 2.1.1 STOCK or should I flash GreyBlur/GingerBlur?
A) Stock is actually quite decent, for Canadian Fido users there is a HUGE improvement as the carrier name is actually correct now and does not take 50% of the notification bar. None the less, GreyBlur runs beautifully and even faster on this SBF! Its quite impressive in boot time, smoothness and the loss of all the bloatware is quite good. It also provides theming support for us International users, so that we may use 1.5.7/1.8.3 framework themes!
Q) 1080p recording?!
A) Yes.. By running Seven's Blurfix Patch, LGCamera Free is installed. This as well as an internal mod allows 1080p recording on the phone! There are however special settings to get it to work.
Instructions:
-Start LGCamera
-Press the Back key to get rid of the purchase nag or buy the full version!
-Select the Video option to switch Video recording
-Press the menu key to open the options menu
-In the options menu scroll down to Video settings and set the following settings. (This is the only way 1080p will work!)
Video Resolution: 1920 x 1080 (1080p)
Encoder: Default
File Format: MPEG4
Video Bitrate 13 Mbit
Hit the red button and you're good to go!
Q) What is HSUPA?
A) High-Speed Uplink Packet Access (HSUPA) is a 3G mobile telephony protocol in the HSPA family with up-link speeds up to 5.76 Mbit/s. By default both the ATT and Bell ROMS have this disabled and therefore features like Voice over IP, skype, videochat are almost unusable. By enabling HSUPA this allows you to use these and also benefit from faster uplink access therefore speeding up you're mobile internet.
Q) Why is GingerBlur 3.1 not recommended.
A) It has been shown in various threads and people's reports (in my original thread) that 3.1 has various glitches and issues. Non functional Home button (when skipping motoblur setup), wifi issues (although most of them resolved now) as well as terrible battery life. GreyBlur on the other hand has proven to work PERFECTLY and is a better platform to have custom framework modded ontop of it. Use all both of these at your own risk!
Q) Why is Swype removed by applying BlurFix Patch?
A) Because there are issues with it. I'm also not allowed to post information or files related to swype on how to fix it. The alternative is to install the updated beta which can be found here in the DEV section. Much better fix/alternative.
Q) I want my Launcher to be smoother! How?
A) Use LauncherPro. It is by far the smoothest. A good alternative is GoLaucher Ex which is also great.
Q) I did not get the Power Icon that you mentioned in your guide.. what did I do wrong?
A) This is a feature of the Atrix called Power Management. It can be accessed at: Settings->Battery Manager -> Battery Mode. There you can select whatever profile you want!
Q) I want to flash other themes! What do I do?!
A) Feel free to flash any theme that is for ATT framework ONLY.. As long as you have GreyBlur installed this will work. Try to flash themes for 1.5.2 and 1.8.x ATT. Previous ones are unknown and unsupported.
Q) I flashed a theme and now, my phone wont boot!!! what do I do? Do I have start over again?
A) No you dont! First if this happened, you have to Factory Reset. (That sucks.. But its the price we have to pay to get this functioning)
Follow this short guide below: How to access Android Recovery
-On your first reboot after flashing a new theme, hold VOL down as the phone powers on.
-Then use power down again to select Android Recovery
-Once selected, press Power button ONCE, then VOL UP
-Tap lower right hand corner of screen if you have no buttons
-Select Wipe data/factory reset using volume buttons
-Triple tap (or more) on the lower left hand corner of the screen to select OK
-Using the same method, reboot the phone using that option in the menu!
-The phone should boot.
Should the phone not boot, it means you flashed something unsupported so back to square one!
Q) My Lapdock Keyboard is all messed up!! What do I do?
A) Unfortunately you did not read the section above (STEP 3) which specifically states what should be done in preparation to flash so that your Lapdock Keyboard functions properly. I am attempting to create a hotfix patch for this to avoid people having to reflash but at the moment there is no other way.
Q) I wish to DeOdex Stock 2.1.1 so that I may theme my phone without using GingerBlur/GreyBlur or to install Arabic Language pack. What do I do?
A) Read STEP 2, after ROOT and RECOVER there is a section now, which contains instructions on how to use the 2.1.1 DeOdex tool I've created.
Q) I'm having connectivty issues with DATA and VOICE.. what do I do?
A) Flash this radio -> HERE. This generally solves issues with connectivity.
If you have any more questions please let me know!
thanks, but why do you say gingerblur 3.1 is not recommended?
running it on 1.4.2 and don't have any issues... just wondering before I update to 2.1.1
scorneil said:
thanks, but why do you say gingerblur 3.1 is not recommended?
running it on 1.4.2 and don't have any issues... just wondering before I update to 2.1.1
Click to expand...
Click to collapse
This info will be added to the FAQ section but just be aware 3.1 drains battery like hell. Don't mind people saying that resetting stats will fix it but a lot of people have reported issues with that. (I suspect it has something to do with Gallery3D version which is a known drain)
2.1 on the other hand has much snappier performance and the battery life is just a lot better.
Also people using phones from other regions, international regions have reported issues with it if you read the thread.
Well done guides!
Stock Bell Atrix on Rogers with updated radio, Rooted, deodexed, Honeycomb theme, and frozen!
seven2099 said:
This info will be added to the FAQ section but just be aware 3.1 drains battery like hell. Don't mind people saying that resetting stats will fix it but a lot of people have reported issues with that. (I suspect it has something to do with Gallery3D version which is a known drain)
2.1 on the other hand has much snappier performance and the battery life is just a lot better.
Also people using phones from other regions, international regions have reported issues with it if you read the thread.
Click to expand...
Click to collapse
ya, i did have the battery issue but it's much improved (in my case anyway) with a battery calibration.
Battery drain or not that Gallery3D is horrible.
thanks for the info
scorneil said:
ya, i did have the battery issue but it's much improved (in my case anyway) with a battery calibration.
Battery drain or not that Gallery3D is horrible.
thanks for the info
Click to expand...
Click to collapse
No problem! Thanks for the feedback. Make sure you read the section on the BlurFix Patch I've created. This will disable the OTA nags and add a few goodies!
Enjoy SIR!
Question about the 1080p recording - is this sufficient for a daily driver? I don't use my camera a ton but when I do, it's normally extremely critical. And because we have another camera app included (which has the options to allow 1080p after we've applied the appropriate mod) is it safe to assume that the native camera app is the same?
I guess what I'm asking is if the normal camera app stays as is, where as the LGFree camera app is able to use the mod?
Thanks for all your hard work, man. And thanks so much for giving us Bell Atrix users MUCH more than just a glimmer of hope. I'm floored at how well the new SBF file is. Holy ****!!! Now I can't even begin to imagine how much opportunity there is once we start looking at Gingerbread and future framework. Never knew how much of an improvement we'd see without even unlocking the full capabilities and dual core processor.
Ok so what exactly is fixed in this sbf? Telstra fixed the hsupa... what does this fix?
edit: nevermind...
Sent from my Motorola Olympus
bongd said:
I guess what I'm asking is if the normal camera app stays as is, where as the LGFree camera app is able to use the mod?
Click to expand...
Click to collapse
The regular app does not support 1080p yet. This is simply because there was probably no budget left when developing this to enable it (although simple enough, would probably require a lot tweaking on their part to get the best out of the camera)
As for LGCamera, the Free version or paid version can both produce MUCH better image quality than the Stock camera. I will add some more information to the FAQ as to how to improve image quality using LGCamera.
Cheers! and Glad you like it! I do agree, it is AMAZING.
ChongoDroid said:
Ok so what exactly is fixed in this sbf? Telstra fixed the hsupa... what does this fix?
Sent from my Motorola Olympus
Click to expand...
Click to collapse
Read the guide and user feedback.
Hi seven,
First of all, thanks for the hard working!!!
Everything is fine, except that I didn't get the power icon after flashing greyblur. What program is that?
Also, how can I get gingerbread theme on greyblur?
Cheer!
Thiago
Beat me to the edit haha... All right well I guess I'll have to flash this at my friends windows machine.
Sent from my Motorola Olympus
seven2099 said:
The regular app does not support 1080p yet. This is simply because there was probably no budget left when developing this to enable it (although simple enough, would probably require a lot tweaking on their part to get the best out of the camera)
As for LGCamera, the Free version or paid version can both produce MUCH better image quality than the Stock camera. I will add some more information to the FAQ as to how to improve image quality using LGCamera.
Cheers! and Glad you like it! I do agree, it is AMAZING.
Click to expand...
Click to collapse
You are a machine, brother!
Thanks for helping us increase the user experience with this phone 10-fold! Only ****ty thing is that a few people at my work place are getting Atrix's and now they want me to put these amazing mods on their phones too.. sheesh. Look what you've done!
bongd said:
You are a machine, brother!
Thanks for helping us increase the user experience with this phone 10-fold! Only ****ty thing is that a few people at my work place are getting Atrix's and now they want me to put these amazing mods on their phones too.. sheesh. Look what you've done!
Click to expand...
Click to collapse
LOL hahahahaha
No worries dude! I do what I can because I LOVE this phone.
tsouza said:
Everything is fine, except that I didn't get the power icon after flashing greyblur. What program is that?
Click to expand...
Click to collapse
Glad you enjoy the effort! The power icon can be accessed under:
Settings-> Battery Manager -> Battery Mode.
There you can select what you want!
tsouza said:
Also, how can I get gingerbread theme on greyblur?
Click to expand...
Click to collapse
Yes you can get Gingerbread theme. Check the Themes and Apps section! you can find plenty that work on ATT framework! After you flash though and if your phone does not boot, make sure you simply do Factory Reset (I know this sucks terribly.. but its the price we pay to get this functional!)
I have to open a new thread here because I can't still post in the android section, by the way I've tried to follow the instruction found in this post for solve the keyboard freezing problem but I when I launch the script it says that he can't find the 2 files it have to launch, and opening the folder by the terminal or by my ubuntu I can't found the 2 files
/lib/modules/microp-ksc.ko
/lib/modules/microp-keypad.ko
anyone knows why?
a member wrote on the same post that he had the same problem, so he have deleted some files and have run the new kernel...how can I launch the device with another kernel?
thank you
Hi,
answer is easy (well, for those who looked behind the scenes), at boot, the system checks if the kernel-modules on the sdcard are different from the installed in /lib/modules ... and due to the fact that the kernel version is the same (just with the keypad drivers optional as modules), the unpacking of the tar.gz-archive is skipped.
You have two options now, use the 'Terminal Emulator' and do a:
su
rm /lib/modules/*
and reboot your phone, or copy the two modules from the tar.gz in ubuntu.
Ciao
Kurt
I have tried the first before opening this thread without any result, now I'm retrying
ehm...now the script runs...but I can't use the onscreen keyboard and everytime I enter an app the screen rotates...is it normal?
and if I press camera button it doesn't return to the home
Hm, rotating the screen is not normal ... just if he thinks you pulled out the 'real' keyboad.
I think, the camera button of Honeycomb froyo is prepared for camera usage ;-).
Hm, perhaps, best solution at the moment would be, to run the unload-load-script when the phone is waking up from sleep mode. So, when keypad is lost, the user can send to sleep with the power button an immediately switch it on again ... and additionally, the script can run when a call comes in ... don't know if these events can get picked up and the event-handlers can be changed, just thinking ...
Ciao
Klaus
Hi everyone. I've recently rooted my phone and installed Link2SD. Everything works fine. I can check the 2nd partition storage info in Link2SD. All apps are linked to sd etc..However when i power off and power back on my phone i get:
Mount warning: cannot boot 2nd partition automatically, quick reboot or re-create mount file something like that. When i do a quick reboot it fixes it until i power off my phone again.
Is this normal? (i read somewhere that Link2SD does this when you turn off your phone and its normal) If not what did i do wrong? Everything else works fine like i said.
Phone: Samsung Galaxy Mini (Dart) Stock firmware: Android 2.2 (thinking of upgrading to gingerbread)
Thanks in advance
Also quick questions:
1. i have an .apx file uploaded to dropbox. Through the dropbox app on my phone, I clicked it and I installed it on my phone through dropbox. Is the file saved to my sd card? or it just "Run"
2. when i try to type chinese, some characters show up as squares, like this character -> 不
why is that? (i tried a lot of input IME and they all only display some chinese not all)
3. you know the 4 bottom lights (touch light i think its called), sometimes they just stay lit on even when i turn off the screen or even when i'm charging it overnight. can i turn those off? sometimes it goes off, sometimes not...
Thank you very much in advance
this is not normal what you should do is
do a quick reboot
move every app again to internal
make partitions again
and then install link2sd and move apps
in short do everything again
----------
tap on the file again if it prompt you to install again without downloading then file is saved to your sdcard
else keep your finger tapped on file and then select export/save then select sdcard
---------------
you must not be having Chinese language in your mobile that
or try go keyboard with Chinese input (if available)
---------
what are you talking about 4 lights galaxy mini don't have any touch keys
+1 Thanks
I'm going to return the phone cause I did a factory reset and the chinese texts still seem bugged. (only a few are displayed and some show as squares). I'll retry Link2SD again when I get the new phone.
Factory reset apparently fixed the 4 touch keys for me. I mean the menu, home, back, search keys under the touch screen.
sometimes they would just stay lit 24/7 while charging lol..
you must be having carrier specific phone
originally it was locked. I unlocked it.
UPDATE:
turns out the Samsung Dart T499 doesn't have native chinese support So some chinese characters show and some don't ....
guess i could try looking for a custom rom ..
PS: this phone suks.
yeah I was right you have T-Mobile's dart that's why it is having touch keys
Yea its from T-Mobile in the USA. I'm in Canada so its Mobilicity. Though exact same phone just branded differently.
guess theres no fully working custom rom out for this phone. The only one i know of has camera problems
UPDATE:
Managed to figure out the (Mount Warning): mount 2nd partition on boot problem. I used Link2SD 1.7 on my SGH-T499 and everything works fine now... Newest version was giving me problems ...
I'm assuming the stock rom isn't fully working with the latest Link2SD version from Play Store..