Database Develop

irretrievable ERROR?PLZ help!!!

After cooking the new rom with my p3700 with 100% finished,but it sudddenly
comes as a error.Then i try to softreset it and now,the phone stuck on the bootloader screen .Its totally irresponsive to any action,not work in cooking a rom with my pc nither restoring it.any solution?FORGIVING ME I'm fresh.
.

kit03190 said:
After cooking the new rom with my p3700 with 100% finished,but it sudddenly
comes as a error.Then i try to softreset it and now,the phone stuck on the bootloader screen .Its totally irresponsive to any action,not work in cooking a rom with my pc nither restoring it.any solution?FORGIVING ME I'm fresh.
.
Click to expand...
Click to collapse
Have you tried a Hard Reset?
Have you unlocked your device first?

mr.horndoctor said:
Have you tried a Hard Reset?
Have you unlocked your device first?
Click to expand...
Click to collapse
I have tried hundred times to Hard Reset.And it's not working.
unlock my device?I'm not sure.I've just cook a non-official rom to my device.
for the first time.and met this sreious problem.ORZ LOL

Doesn't matter what you did. If you can still get into bootloader then you can flash from there. Either flash a stock ROM or use mtty to flash another ROM.

supersanj said:
Doesn't matter what you did. If you can still get into bootloader then you can flash from there. Either flash a stock ROM or use mtty to flash another ROM.
Click to expand...
Click to collapse
i think so .yet my device doest not response my PC at all'

Here's what you need to do before you connect your usb cable to the diamond:
1. Download MTTY from here:
http://forum.xda-developers.com/attachment.php?attachmentid=208457&stc=1&d=1248437219
2. Download any ROM you want
3. Right click the ActiveSync icon and click "Connection Settings"
4. Untick "Allow USB Connections"
5. Now hold the volume down button and press the reset using the stylus.
6. It will come up with the tri-colour bootlader screen and at the bottom it should say "serial".
7. Connect the usb cable and the "serial" should change to "USB"
8. Run the MTTY program.
9. Select "USB" from the "Port" Dropdown menu. Then press "OK"
10. Press the "Enter" key on your keyboard to get a prompt.
11. Type "set 14 0". and press Enter.
12. Type "task 29" and press Enter.
13. Hold the Diamond in your hand and get ready to press and hold down the volume down key. Don't disconnect the usb cable.
14. Type "task 8" and press Enter. This will restart the phone so as soon as you press Enter press and hold down the volume key to get into bootloader again.
15. It will show "USB"
16. Flash the ROM you downloaded using the RUU.
17. After the flash do a hard reset (volume down and centre buttons pressed then reset using stylus. When prompted select "volume up". Don't press the "volume down button as it will also delete your internal storage.
18. You're done.

supersanj said:
Here's what you need to do before you connect your usb cable to the diamond:
1. Download MTTY from here:
2. Download any ROM you want
3. Right click the ActiveSync icon and click "Connection Settings"
4. Untick "Allow USB Connections"
5. Now hold the volume down button and press the reset using the stylus.
6. It will come up with the tri-colour bootlader screen and at the bottom it should say "serial".
7. Connect the usb cable and the "serial" should change to "USB"
8. Run the MTTY program.
9. Select "USB" from the "Port" Dropdown menu. Then press "OK"
10. Press the "Enter" key on your keyboard to get a prompt.
11. Type "set 14 0". and press Enter.
12. Type "task 29" and press Enter.
13. Hold the Diamond in your hand and get ready to press and hold down the volume down key. Don't disconnect the usb cable.
14. Type "task 8" and press Enter. This will restart the phone so as soon as you press Enter press and hold down the volume key to get into bootloader again.
15. It will show "USB"
16. Flash the ROM you downloaded using the RUU.
17. After the flash do a hard reset (volume down and centre buttons pressed then reset using stylus. When prompted select "volume up". Don't press the "volume down button as it will also delete your internal storage.
18. You're done.
Click to expand...
Click to collapse
I am able to cook a new rom now.but failed and it said corrupted image.how can deal with it?

What ROM kitchen are you using?

supersanj said:
What ROM kitchen are you using?
Click to expand...
Click to collapse
thanks for helping!my problem is solved!
one problem is left....
the ram always used above 90%hard to do anything.

kit03190 said:
thanks for helping!my problem is solved!
one problem is left....
the ram always used above 90%hard to do anything.
Click to expand...
Click to collapse
Open File Explorer and navigate to Task Manager in the main Windows folder and click to open. Then click on the right softkey and highlight view and then click on processes.
Then you can see what processes are running and what is using up ram.
Then use an app like CleanRam or MemMaid to stop/close processes and reclaim/free up used ram.

[Q] HELP!

Hi everyone,
So while I was updating my lg2x to 4.0.4 it got interrupted! I found my phone shut off so I tried to turn it on and it worked even though the LG support tool said the update was not completed but when I opened it, it was working fine with 4.0.4 system BUT after a day it turned off!! I couldn't turn it on anymore, it won't work!! I send it to LG company in my country and they told me they don't know how to deal with it! (lg 2x didn't get released in my country!) I really don't know what to do!? can somebody help me??! :crying: :crying:

It seems you have a hardver problem, but may be not.
Download V30A ics rom.
Download AIO TOOLKIT and install it.
Remove battery from your phone
Connect USB cable to the phone while you are pressing and holding voulme_up and volume_down button.
Stat AIO-TOOLKIT
Select option "I" (capital i) to install APX (NVFLASH recovery) and follow the instrucitons.
Then select option 4 on the next screen option 1 and on the next screen select 1 again, then select 2, hit enter then type "ok" and hit enter
Wait until the process is finished.
Remove phone.
Insert battery then turn it on.
It will boot up into a wierd menu, don't be afraid of that
If it booted up turn off your phone by removing battery
In AIO-TOOLKIT select option 5 hten option 1 then drag and drop the v30A.kdz file to the AIO-Toolkit window and hit enter.
After the extraction press "N"
The extracted files are in the V30A_00 folder where AIO-Toolkit was installed.
Select option 7 in AIO-toolkit then option "a"
"SmartFlash Tool" window appears
Select ROM copy D/L
In the CP bin section select the "P990_CP.fls" file (you extracted it before, it is in the V30C_00 folder)
In the Ap bin section select the "P990_AP.bin" file (it is next to the "P990_CP.fls" file in the V30C_00 folder)
Insert battery again to you phone.
Connect USB cable while you are pressing and holding volume_down button. Hold it until a screen appears telling you that "S/W download".
You can release the button.
Press start in SmartFlash window.
If it the smartflashing process fails due Timeout error, keep trying. Remove batter then do it again from number 21. If it still fails try to flash only P990_CP.fls until it succesfully finished then try to flash P990_AP.bin until it finishes

bitdomo said:
It seems you have a hardver problem, but may be not.
Download V30A ics rom.
Download AIO TOOLKIT and install it.
Remove battery from your phone
Connect USB cable to the phone while you are pressing and holding voulme_up and volume_down button.
Stat AIO-TOOLKIT
Select option "I" (capital i) to install APX (NVFLASH recovery) and follow the instrucitons.
Then select option 4 on the next screen option 1 and on the next screen select 1 again, then select 2, hit enter then type "ok" and hit enter
Wait until the process is finished.
Remove phone.
Insert battery then turn it on.
It will boot up into a wierd menu, don't be afraid of that
If it booted up turn off your phone by removing battery
In AIO-TOOLKIT select option 5 hten option 1 then drag and drop the v30A.kdz file to the AIO-Toolkit window and hit enter.
After the extraction press "N"
The extracted files are in the V30A_00 folder where AIO-Toolkit was installed.
Select option 7 in AIO-toolkit then option "a"
"SmartFlash Tool" window appears
Select ROM copy D/L
In the CP bin section select the "P990_CP.fls" file (you extracted it before, it is in the V30C_00 folder)
In the Ap bin section select the "P990_AP.bin" file (it is next to the "P990_CP.fls" file in the V30C_00 folder)
Insert battery again to you phone.
Connect USB cable while you are pressing and holding volume_down button. Hold it until a screen appears telling you that "S/W download".
You can release the button.
Press start in SmartFlash window.
If it the smartflashing process fails due Timeout error, keep trying. Remove batter then do it again from number 21. If it still fails try to flash only P990_CP.fls until it succesfully finished then try to flash P990_AP.bin until it finishes
Click to expand...
Click to collapse
Thank you so so so much~!
but I only got through the 7th step!! so when I selected option 2 it told me to "Change layout to NEW ICS Partition layout and Unlocked BL" and honestly I don't know how to do so!? can you help me with this too, please?!
sorry for any disturbing!

bessi96 said:
Thank you so so so much~!
but I only got through the 7th step!! so when I selected option 2 it told me to "Change layout to NEW ICS Partition layout and Unlocked BL" and honestly I don't know how to do so!? can you help me with this too, please?!
sorry for any disturbing!
Click to expand...
Click to collapse
Do a screenshot, please. If you want to make it quick, then install Team viewer and send me your ID and password in e-mail: [email protected]

I sent my ID and password~! and here is a screenshot~

What I see from this picture is that you didn't installed the drivers or you didn't connected the phone properly or your phone is truly dead
I didn't get the e-mail
send me a private message in xda then

so I resend my ID and password! I accidently send it to another person!
I hope you got it now!

Problem solved. :highfive:

@bitdomo
Just wanted to know if I can use the list you put in the 2nd post.....good detailed info in it for using the AIOT
I would like to put this in the sticky thread and if possible (if I have any space left in my signature) in my signature too
Thanks my friend

SREEPRAJAY said:
@bitdomo
Just wanted to know if I can use the list you put in the 2nd post.....good detailed info in it for using the AIOT
I would like to put this in the sticky thread and if possible (if I have any space left in my signature) in my signature too
Thanks my friend
Click to expand...
Click to collapse
Yes, you can.
Sent from my LG-P990 using xda app-developers app

bitdomo said:
Yes, you can.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
thanks my friend
luckily my thanks was your 100th too
Best wishes

[Q] LG P880 V20a 4.1.2 boot ulock cant root for CWM

Dears,
I have tried everything with ADB "all-in-one-tool" "srs root" but couldnt root my phone,
ADB drivers installed, when i select "apply update from ADB" and hit root.bat from pc it stuck on Daemon started and nothing happens
All-in-one-tool says su not found
when install supersu or superuser it doesnt update binary and says application stopped error.
SRS also said su not found.
PLease HELP!!!
Edit-1
1. Preferred adb tool on the computer, and have installed adb driver. Is the driver of the machine, the peas like software is installed on the line.
2.Phone off, press the "volume down" and "power" key to boot, do not release the volume down key until the screen appears with a red triangle robot.
3 Insert the USB connected to the computer, use the "volume" down select "Apply update from ADB, press the power button to determine two lines of yellow text prompts.
4 Double-click ROOT.BAT.
5.Installation is complete, the phone to return to the menu cursor restart items, press the power button to restart the phone.
6. Superuser icon appears on the phone, running "information page, click here to check for updates, connect to the network, mandatory update
Thread no#2180688 worked

need help, installing ota zip to my nexus 6

Hello guys,
i was following this article, from yahoo, i cannot post it
and reached the point of
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
but it says this in the cmd
device <null> NOT attached.
the phone is still connected, what do i do now?
please help

hendyanto said:
Hello guys,
i was following this article, from yahoo, i cannot post it
and reached the point of
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
but it says this in the cmd
device <null> NOT attached.
the phone is still connected, what do i do now?
please help
Click to expand...
Click to collapse
Where does it say this and at what point? Your phone is 100% stock then, correct? You set up adb correctly?
We'll need more information than supplied. You should walk us through step by step

hendyanto said:
Hello guys,
i was following this article, from yahoo, i cannot post it
and reached the point of
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
but it says this in the cmd
device <null> NOT attached.
the phone is still connected, what do i do now?
please help
Click to expand...
Click to collapse
I was having the exact same problem last night, following the same instructions. I still could not figure out how to sideload the OTA, so I ended up just flashing the update and starting from fresh. Wish I had the answer for you.
Here was my thread asking pretty much the same thing: http://forum.xda-developers.com/nexus-6/help/disconnects-computer-entering-bootloader-t3230705

danarama said:
Where does it say this and at what point? Your phone is 100% stock then, correct? You set up adb correctly?
We'll need more information than supplied. You should walk us through step by step
Click to expand...
Click to collapse
100% Stock, yes! 1 week old.
Yes i have set up ADB
I have followed the instruction until this part (i cannot post any link sorry, not authorized by xda)
The following ADB commands are for Windows machines. If you’re using a Mac, just add “./” before each command, for example: “./adb reboot bootloader”.
Assuming you device is already connected to your computer via USB and USB Debugging is enabled, you need to re-start it in fastboot mode. Follow one of the two methods below. Option A may be preferable because it’s another confirmation that your computer recognizes your Nexus device.
A) Type “adb reboot bootloader”
B) Turn your device off, then turn it back on while holding down the relevant key combinations for your device. For many devices it’s Volume Up + Volume Down + Power. You can see what your device’s key combinations are here.
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
In the command window — make sure you are in the directory where ADB and Fastboot reside — type: “adb sideload [the full name of the file].zip” without the brackets around the file name.
The update will install and reach 100 percent.
Reboot and enjoy the latest version of Android Marshmallow.
Click to expand...
Click to collapse
(red arrow) and then the cmd says the null error, i am trying this now
I had the same problem. Turned MTP on and then it worked. You're told to turn it off but don't... Its in Settings-Storage-touch the ... Menu top right corner, USB settings and turn ON MTP mode. It worked well for me. I also used the Nexus Root Toolkit - makes things much easier!
Click to expand...
Click to collapse
My phone is able to rebooot (the options comes out sometimes after i did not do anything) and now optimising app (like it usually did after an OTA update)

hendyanto said:
100% Stock, yes! 1 week old.
Yes i have set up ADB
I have followed the instruction until this part (i cannot post any link sorry, not authorized by xda)
(red arrow) and then the cmd says the null error, i am trying this now
My phone is able to rebooot (the options comes out sometimes after i did not do anything) and now optimising app (like it usually did after an OTA update)
Click to expand...
Click to collapse
There are lots of additional steps in that guide and not always the simplest way of doing it.
First thing to do is boot into recovery.
- Turn off the phone.
- Hold volume down + power
- At the bootloader screen, use volume keys to navigate to recovery and press power to select#
- At the Red warning triangle, hold power then press volume up.
At this stage, type "adb devices" in your command prompt and see if it returns your serial number or not. If it does, you can follow the steps to use adb to flash the update.
Please note, the guide talks about USB debugging. This only works in android. Nothing you need to do needs to be done via android so this is nonsense. Also the MTP option only works in android, so setting this in settings as a fix is also nonsense.

danarama said:
There are lots of additional steps in that guide and not always the simplest way of doing it.
First thing to do is boot into recovery.
- Turn off the phone.
- Hold volume down + power
- At the bootloader screen, use volume keys to navigate to recovery and press power to select#
- At the Red warning triangle, hold power then press volume up.
At this stage, type "adb devices" in your command prompt and see if it returns your serial number or not. If it does, you can follow the steps to use adb to flash the update.
Please note, the guide talks about USB debugging. This only works in android. Nothing you need to do needs to be done via android so this is nonsense. Also the MTP option only works in android, so setting this in settings as a fix is also nonsense.
Click to expand...
Click to collapse
I cannot get my windows to detect the phone during recovery mode, it always disconnected at that point.
I'll try again when i have the time, thank you all.

hendyanto said:
I cannot get my windows to detect the phone during recovery mode, it always disconnected at that point.
I'll try again when i have the time, thank you all.
Click to expand...
Click to collapse
Could be a driver issue. You'll need to check device manager. Perhaps uninstall the existing drivers and let it auto detect.
Failing that, install the Naked driver from my adb and fastboot thread (Nexus 6 general > Sticky roll-up thread > Adb and fastboot. What is it?)

I had the same issue with you until i did the following: I used wugfresh's nexus utility. Then I downloaded the respective file from XDA and saved it in the same folder as the Wugfresh's tool. Restarted in Recovery mode and chose 'update from adb'. Connected the phone with the usb having USB debugging on from before going to recovery. Started the CMD window from Wugfresh's tool (Advanced Utilities -> Launch) and check that the phone is connected (I think "adb devices") . Then "adb sideload xxxx.zip" and waited for the process to finish.
Instruction here: androidpolice 2012/11/13/android-4-2-build-jop40c-rolling-out-to-the-nexus-7-now-manual-download-link-available/
You do not have to install the full Android utility. Just use wugfresh;s cmd screen. Good luck!

danarama said:
Could be a driver issue. You'll need to check device manager. Perhaps uninstall the existing drivers and let it auto detect.
Failing that, install the Naked driver from my adb and fastboot thread (Nexus 6 general > Sticky roll-up thread > Adb and fastboot. What is it?)
Click to expand...
Click to collapse
qwerty1gr said:
I had the same issue with you until i did the following: I used wugfresh's nexus utility. Then I downloaded the respective file from XDA and saved it in the same folder as the Wugfresh's tool. Restarted in Recovery mode and chose 'update from adb'. Connected the phone with the usb having USB debugging on from before going to recovery. Started the CMD window from Wugfresh's tool (Advanced Utilities -> Launch) and check that the phone is connected (I think "adb devices") . Then "adb sideload xxxx.zip" and waited for the process to finish.
Instruction here: androidpolice 2012/11/13/android-4-2-build-jop40c-rolling-out-to-the-nexus-7-now-manual-download-link-available/
You do not have to install the full Android utility. Just use wugfresh;s cmd screen. Good luck!
Click to expand...
Click to collapse
Thank you guys! But after this "happy"night, i woke up to the OTA for marshmallow arrived on my phone, so see you guys on the rooting section instead, Thank you thank you for the help

[STOCK][CRICKET]HTC Desire 510 Stock Ruu v1.11.506.8

Hello everyone,
If someone needed I am putting this link to not lost himself in the deep of google forests.
Ruu tested and makes you return to stock. (Tested by myself).
Link : http://dl3.htc.com/application/RUU_A11_UL_K44_DESIRE_SENSE60_AIO_Aio_Wireless_US_1.11.506.8.exe
Performing the ROM Update:
1. Download and save the HTC Desire™ ROM update to your PC.
2. Connect your device to your PC via the supplied USB cable.
3. If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
4. Once the device is properly recognized on the PC, locate the HTC Desire 510 ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
5. Follow all of the system update wizard instructions shown on your PC.
6. Once the update is complete, click Finish in the Wizard and the device will reboot.
7. Once the device reboots, the initial setup wizard will appear.
8. Once the initial setup process is complete, open Play Store, tap the Menu icon, then select My apps and ensure all installed apps are updated.
9. After initial setup and updating all apps, the device is ready for use.
Note : If the ROM update wizard fails to recognize the device, close the wizard and then follow the steps below:
· From a powered off state, hold VOLUME DOWN while powering on the device.
· Use the volume buttons to scroll to FASTBOOT and then press the POWER button to select it.
· Connect the device to the PC while in this state and attempt the ROM update again.
To exit FASTBOOT manually, use the volume keys to navigate to REBOOT and press the POWER button to select it.

Does this work with the VM version too? If not, can you post that RUU as well? Thanks.

rjmohit said:
Does this work with the VM version too? If not, can you post that RUU as well? Thanks.
Click to expand...
Click to collapse
Considering that you've made 283 posts on xda, don't you think a simple google search would have given you the VM RUU that you want? And no Crickets will not work. Sprint, Boost, Virgin Mobile RUU

benzersizadam said:
Hello everyone,
If someone needed I am putting this link to not lost himself in the deep of google forests.
Ruu tested and makes you return to stock. (Tested by myself).
Link : http://dl3.htc.com/application/RUU_A11_UL_K44_DESIRE_SENSE60_AIO_Aio_Wireless_US_1.11.506.8.exe
Performing the ROM Update:
1. Download and save the HTC Desire™ ROM update to your PC.
2. Connect your device to your PC via the supplied USB cable.
3. If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
4. Once the device is properly recognized on the PC, locate the HTC Desire 510 ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
5. Follow all of the system update wizard instructions shown on your PC.
6. Once the update is complete, click Finish in the Wizard and the device will reboot.
7. Once the device reboots, the initial setup wizard will appear.
8. Once the initial setup process is complete, open Play Store, tap the Menu icon, then select My apps and ensure all installed apps are updated.
9. After initial setup and updating all apps, the device is ready for use.
Note : If the ROM update wizard fails to recognize the device, close the wizard and then follow the steps below:
· From a powered off state, hold VOLUME DOWN while powering on the device.
· Use the volume buttons to scroll to FASTBOOT and then press the POWER button to select it.
· Connect the device to the PC while in this state and attempt the ROM update again.
To exit FASTBOOT manually, use the volume keys to navigate to REBOOT and press the POWER button to select it.
Click to expand...
Click to collapse
Link is not working bro...

i have new link, check, bro